ESD/L-124/18

Amount

Dismantling old plaster or skirting raking out joint and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab,including rubbing and polishing complete with base of cement mortar 1 : 4 (1cement : 4 coarse sand):(minimum thickness of stone 25mm)

Cement concrete flooring 1:1 1/2;3 cement;1 1/2 coarse sand:3graded stone aggregate)finished with a floating coat of neat cement,including cement slurry,but excluding the cost of nosing of steps etc.complete. 40mm thick with 20mm nomonal size stone aggregate.

Cleaning of exposed concrete/brick work surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by andincluding cleaning with oil free air blast as per direction of Engineer in charge.

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 mx1 mx400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges, making and finishing the outlet complete

Providing and applying white cement based putty of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(Birla wall care putty or its equivalent) Note: Birla or Jk or its equivalent approved make

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two or more coats on new work including primer coat of interior Note :A sian / Berger or its equivalent approved make

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work Note :Asian / Berger or its equivalent approved make

Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within IICT Campus lead as per direction of Engineer-in-charge

Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete : 25 mm thick

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :100 mm diameter

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal outer dia Pipes Note :Ashirvad / Astral or its equivalent approved make

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 fine sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 coarse sand(Zone-III) : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Note : Jindal or its equivalent approved make

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete Note : TATA /SAIL/ VSP (Vizag) or its equivalent approved make

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in -charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 100 mm diameter S.W. Pipe

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 finesand) and a top layer 6 mm thick cement plaster 1:3 (1cement : 3 fine sand) finished rough with sponge.

Dismantling asbestos cement pressure pipes including excavation and refilling trenches after taking out the pipes manually/ by mechanical means and tacking the pipes within 50 metres lead as per direction of Engineer-in-charge : Up to 150 mm diameter

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 110 mm bend

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 110 mm Shoe Note : Sudhakar or its equivalent approved make

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved makeconforming to IS: 733 and IS: 1285, fixing with dash fasteners ofrequired dia and size, including necessary filling up the gaps atjunctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required Powder coated alumiunium (minimum thickness of powder coating 50 micron) Note : Jindal or its equivalent approved make

Taking out doors,windows/shutters and clerestory windows(steelor wood )including stacking with in 50m metres lead Of area 3 sqm and below

Finshing Walls with Arcylic Smooth exterior paint of required shape Two or more coats applied @1.43litr/10sq.m over and including priming coat of exterior primer applied @2.20kg/10sq.m Note :Asian / Berger or its equivalent approved make

Mirror polishing on marble work /granite work/stone work where ever required to give high gloss finish complete

Providing gola 75x75mm in cement concrete 1;2;4 (1cement 2coarse sand; 4stone aggregate 10mm and down gauge) including finishing with cement mortor 1;3 (1cement ;3fine sand)as per standard design ; in 75x75mm deep chase

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Disposal of building rubbish/malba/similar unserviceble ,dismantled or waste materials by machanical means of tipper 200 cft including loading transporting unloading to approved municipal dumping ground or as approved by Engineer in charge,beyond 50m initial lead, for all leads including all lifts involved.

Providing and applying Brush Bond RFX of FOSROC or its equilent approved product in over all three coats as per the manufacturers specifications including providing/laying Geo-textile of 40GSM joints filling with brush bond RFX paste whereever required,surface preparation cleaning with wire brushes,washing with water for removing all dirt etc.. complete with all leads and lifts and as directed by Engineer-Incharge.

Exposing the corroded steel around its full circumference and cleaning the same to remove all loose scales and corrosion deposits by hard brush with emery paper or, by any suitable mechanical means as directed by Engineer-in-Charge, so as to get bright conditions and removing the corrosion deposits from pits and imperfections within its surface by compressed air and water at a high pressure. Providing and applying one full coat of anti corrosive treatment of epoxy 'A' (Nitozinc primer of FOSROC Product ) or any other approved compound over the cleaned and prepared surface as per manufacturers specifications including, providing, sprinkling silica sand on freshly coated reinforcement to have a proper bond.

ELECTRICAL iTEMS:Point wiring in PVC conduit, with modular type switch. Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed pvc conduit, with modular switch, modular plate, suitable G.I box and earthing the point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable etc as required. Group - C

Wiring in existing conduit: Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface/recessed steel/PVC condit as required. 3 x 2.5 sq.mm

Wiring in existing conduit: Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface/recessed steel/PVC condit as required.3 x 4 sq.mm

S/F PVC Conduit: Supplying and fixing of following sizes of PVC conduit along with accessories in surface/recess cutting the wall and making good the same in case of recessed conduit as required.(Make:Sudhakar) 25MM

S/F Modular type switch / socket / fan regulator / call bell: Supplying and fixing of following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc., as required .5/6A One way Switch, Indicator Type

S/F Modular type switch / socket / fan regulator / call bell: Supplying and fixing of following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc., as required .15/16A One way Switch,Indicator Type

S/F Modular type switch / socket / fan regulator / call bell: Supplying and fixing of following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc., as required 2pin and 3 pin 5/6A socket outlet.

S/F Modular type switch / socket / fan regulator / call bell: Supplying and fixing of following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc., as required 6pin 15A/16A power socket outlet

S/F Modular boxes, base & cover plate: Supplying and fixing of following size/modules, GI box along with modular base & cover plate for modular switches in recess etc., as required.12 Module

S/F 'C' series MCB: Supplying and fixing of 5A to 32A rating, 240V, 'C' series. Miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc., as required. Single Pole

S/F 'C' series MCB: Supplying and fixing of 5A to 32A rating, 240V, 'C' series. Miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc., as required. Triple Pole

S/F 'C' series MCB: Supplying and fixing of 5A to 32A rating, 240V, 'C' series. Miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc., as required. Triple Pole &Neutral

Supplying and fixing following way, horizontal type three pole andneutral, sheet steel, MCB distribution board, 415 volts, onsurface/ recess, complete with tinned copper bus bar, neutral busbar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/Isolator) 4 way (4 + 12), Double door

Supplying and fixing of following ways surface/ recess mounting,vertical type, 415 volts, TPN MCB distribution board of sheetsteel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar formounting MCB's (but without MCB's and incomer) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 8 way (4 + 24), Double door

Supplying and fixing of 20A, 240V, SPN Industrial type socket outlet with 2pole and earth, metal enclosed plug top alongwith 20A. C curve ,SPMCB ins heet steel enclosure on surface or in recess with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc., as required by the site Engineer.

Supply of poly carbonate 1x18 watts ,4feet , LED Tube light set, along with 1xTLED fixture ,LED Tube-1no,complete with all accessories as directed by Incharge Electrical. Cat.no.TMC501P 1xTLED 20W-14# LED tube 18watts,865,T8 make:Philips

Supply of poly carbonate 2x18 watts ,4feet , LED Tube light set, along with 2xTLED fixture ,LED Tube-2no,complete with all accessories as directed by Incharge Electrical. Cat.no.TMC502P 2xTLED 20W-14# LED tube 18watts,865,T8 make:Philips

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting/ LED fittings of all types, with allaccessories and tube etc. directly on ceiling/ wall, includingconnection with 1.5 sq. mm FRLS PVC insulated, copper conductor,single core cable and earthing etc. as required.

Supply of following XLPE aluminum armoured cable 1.1kV grade of size. Make:Nicco / Havells /Finolex 4C x 16sq.mm

Supply of following XLPE aluminum armoured cable 1.1kV grade of size. Make:Nicco / Havells/Finolex 3.5C x 50sq.mm

Laying of following XLPE aluminum armoured cable in existing trench or on surface / recess including cutting the wall / floor , and making good the same with sand,cement etc; as required. 4C x 16sq.mm

Laying of following XLPE aluminum armoured cable in existing trench or on surface / recess including cutting the wall / floor , and making good the same with sand,cement etc; as required. 3.5C x 50sq.mm

Termination of the following sizes of PVC insulated Aluminium conductor armoured cable using glands, copper sockets, bolts & nuts etc., the gland to be earthed by 12 SWG copper wire to the nearest earth bus. 4C x 16sq.mm

Termination of the following sizes of PVC insulated Aluminium conductor armoured cable using glands, copper sockets, bolts & nuts etc., the gland to be earthed by 12 SWG copper wire to the nearest earth bus. 3.5C x 50sq.mm

Supplying & fixing of TP&N sheet steel enclosure MCB DB in recess/surface including painting, earthing etc., as required. Make: Legrand

Labelling and Lettering of PDB / LDB of required font to suit the equipment with required coloured paint with elegant finishing as required by the site

Labelling and Lettering of Switchboard/Power board of required font to suit the equipment with required coloured paint with elegant finishing as required by the department

Labelling and Lettering of PCC / MCC of required font to suit the equipment with required coloured enamyle paint with elegant finishing as required

Supplying and fixing of the following MCB in the existing MCB distribution board including connections,testing, and commissioning etc, as required. 4 pole 63A, 10KA MCB Make: Legrand

Supplying and fixing of the following MCB in the existing MCB distribution board including connections,testing, and commissioning etc, as required. 4 pole 40A,10KA MCB Make: Legrand

Supplying & fixing of Ceiling rose,jumbo type on existing junction box as required. Make: Anchor

Dismantling of existing PCC panels,Distribution boards and disconnection of existing connected cables,Earth Wires from the switch gears, the work also includes removing of old wiring,power cables, FTLs,Ceiling Fans,Power Sockets, starters, exhaust fans,well glass fittings and all other electrical accessories of entire pilot plant laboratory and transporting the dismantled materials from the site to departmental stores/debries yard as shown and directed by the engineer in charge.

Supplying and fixing of 5 pin flame proof 32amps power socket with plug top and complete set as directed by Engineer incharge

Supplying and fixing of 3 pin flame proof 16amps power socket with plug top and complete set as directed by Engineer incharge

Supplying and fixing of 5 pin flame proof 63amps power socket with plug top and complete set as directed by Engineer incharge

Supplying and fixing 4 way flame proof junction box with complete connectors etc; as directed by Engineer incharge

Supplying of flame proof FWL 40 W LED well glass fitting as directed by Engineer incharge. Make:Crompton

ITC Flameproof well Glass LED fixture: Installation, testing & commissioning of LED well glass fitting including the down rods of 8feet length etc., as directed by Engineer

ITC Flameproof well Glass LED fixture: Installation, testing & commissioning of LED well glass fitting including the down rods of 1feet length etc., as directed by Engineer

Supplying and fixing of 6 amps flame proof switch fitting of IP65 protection as directed by Engineer incharge.

Supplying and fixing of 230volts,50Hz ,450mm sweep flame proof exhaust fan complete set as directed by Engineer incharge

ITC Flameproof Exhaust fan: Installation, testing & commissioning of flame proof Exhaust fan with all accessories etc., in a pilot plant shed as directed by Engineer

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick with 40mm dia GI pipe with holes provided equally, including all accessories and brazing of G.I.strips of 40mm x 5mm(2lengths) from bottom of the plate to the top of the plate and providing of G.I.strip of 40mm x 5mm at the top of the pipe with suitable holes brazed to the pipe so as to terminate the external earthing strip/ wire and providing masonry enclosure with C.I.cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt filled for 900 x 900mm around the plate and alternate layers of salt & charcoal upto 2.7 mtrs of total length as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metrebelow ground as strip earth electrode,including connection/terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Supply of following armoured XLPE flame proof FRLS copper conductor cable 1.1kV grade of size. Make:Glostar / Havells /Finolex 4 C x 1.5 sq.mm

Supply of following armoured XLPE flame proof FRLS copper conductor cable 1.1kV grade of size. Make:Glostar / Havells /Finolex 4 C x 2.5 sq.mm

Supply of following armoured XLPE flame proof FRLS copper conductor cable 1.1kV grade of size. Make:Glostar / Havells /Finolex 4 C x4 sq.mm

Supply of following armoured XLPE flame proof FRLS copper conductor cable 1.1kV grade of size. Make:Glostar / Havells /Finolex 4 C x 6 sq.mm

Supplying and making indoor end termination with metal double compression gland and copper lugs for following size of FRLS PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 C x 1.5 sq.mm

Supplying and making indoor end termination with metal double compression gland and copper lugs for following size of FRLS PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 C x 2.5 sq.mm

Supplying and making indoor end termination with metal double compression gland and copper lugs for following size of FRLS PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 C x4 sq.mm

Supplying and making indoor end termination with metal double compression gland and copper lugs for following size of FRLS PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 C x 6 sq.mm

Laying of following FRLS , XLPE copper armoured cable in existing cable trench, trench or on surface / recess including cutting the wall / floor , and making good the same with sand,cement, paint etc; as required. 4C x 1.5 sq.mm to 4C x6 sq.mm

P/F 16 SWG copper earth wire with conduit/cable : Providing and fixing 16 swgdia. copper wire on surface or in recess for loop earthing along with existing surface/recessed conduit/sub main wiring/cable as required.

P/F 4mm copper earth wire with conduit/cable : Providing and fixing 4.00mm dia. copper wire on surface or in recess for loop earthing along with existing surface/recessed conduit/sub main wiring/cable as required.

Supply of energy efficient ceiling fans 1200 mm sweep with modular electronic 4 positions step type dimmers complete with all accessories and fixing the dimmer in the existing modular plate with connections etc., as required. Make: Crompton / Bajaj Color:White

ITC Ceiling fan: Installation, testing & commissioning of ceiling fan including wiring the down rods of 3feet length with 1.5sq.mm FRLS PVC insulated copper conductor single core cable etc., as required

Supply,Installation,Testing and Commissioning of cubical type MOTOR CONTROL CENTRE(M.C.C.) confirming to IS specification wall/floor mounting, dust & vacuum proof made out of 14 SWG CRCA sheet steel suitable for indoor use, 125A copper bus bar, 415V, 3phase & neutral, 50 Hz system having painted with approved colour by seven tank process complete with earthing, inter connection with adequate size of copper Bus bar and anodized compartments labeling as required by engineer incharge and mounting of the following components as per requirement. The drawing of MCC should be approved by the site engineer before fabrication. The panel pedestal is to be fabricated by supplier as per the requirement. Incomer : 1. MCCB, 125A,4Pole, 415V,50 Hz, 35KA (L&T) 1No. Out goings : 1. MCB, 32A, 3Pole,415V. ( L&T) 20Nos 2. Power contactor with bimetallic relay protection ( DOL starter units) (L&T) - 20Nos. 3. Control S.P.MCBs, 2 Amps - 20Nos.. 4. Measuring Instruments: a. C.T.S (Kappa) 1set b.Terminal blocks of a 6A capacity 40 sets 5. ON/OFF/Trip indicating push button 20 sets 6. Phase indicators, LED type 1 set 7. Multi function Intelligent panel meter with display of integrating KWH,KVAH,voltage,current,pf and all parameters Make:Selec/L&T - 1set 8.C.Ts 150/5A -1set

Supply & fixing of perforated G.I cable trays of the following sizes including tray covers,links on wall/floor using necessary tray support, clamps, nuts, bolts, washers etc., &powder coating painting of the tray and support as directed by Engineer incharge as required. 500x50x2mm

Supply & fixing of perforated G.I cable trays of the following sizes including tray covers,links on wall/floor using necessary tray support, clamps, nuts, bolts, washers etc., &powder coating painting of the tray and support as directed by Engineer incharge as required. 250x50x2mm

Supply & fixing of perforated G.I cable trays of the following sizes including tray covers,links on wall/floor using necessary tray support, clamps, nuts, bolts, washers etc., &powder coating painting of the tray and support as directed by Engineer incharge as required. 100x50x2mm

N RAMAKRISHNA