Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.4 LAccepted-AOC NO 9 6 203 1 G2 DURGA BHAVANI NAGAR CHAMPAPET HYDERABAD 500059 | HYDERABAD | TELANGANA | 500059 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹45.9 L+₹3.5 L (8.26%)Rejected-Finance H NO 8 7 66 PLOT NO 76 VENTURE 2 HASTINAPURAM CENTRAL HYDERABAD 500 079 | HYDERABAD | HYDERABAD | TELANGANA | 500079 | L2 | Rejected-Finance Not lowest | |
| 3 | L3₹48.9 L+₹6.5 L (15.4%)Rejected-Finance | L3 | Rejected-Finance Not lowest |
Tender Value
₹45.3 L
EMD Value
₹90,580
Closing Date
5 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I R and D Kanchanbagh
GE I R and D Kanchanbagh Kanchanbagh Post Hyderabad 500058
PROVN OF ARBORICULTURE FOR DEVELPOMENT OF RADOME FOR AESA RADAR IN ASL AND CERTAIN SANCTIONED WORKS UNDER GE(I) RND KANCHANBAGH HYDERABAD
2022_MES_568297_1
GE I KBAGH TOKEN 66 OF 2022 2023
Open Tender
Civil Works
Item Rate
270 days
Hyderabad
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE I R and D Kanchanbagh
₹90,580
Yes
20 Jan 2023
9 Dec 2022
7 Jan 2023
9 Dec 2022
5 Jan 2023
23 Dec 2022
9 Dec 2022 - 17 Dec 2022
Amount
AREA DEVELOPMENT : Clearing away all grass vegitation and removal of rubbish upto a distance of 50 mtr outside the periphery of area cleared all as specified and as directed by Eng-in-charge.
Preparation of ground by trenching in any type of soils upto a depth of 30 cm including removal & stacking of serviceable material and disposing the surplus soil with all lead & lifts, by spreading and leveling neatly. Making up the trenched area well leveled by filling with additionally supplied earth (if needed)
Rough dressing of trenched ground including breaking clods & flooring with water all as specified and as directed by Eng-in-charge.
After 10-15 days removal of weeds / unwanted grass (Motha etc) with roots & disposal of uprooted material, stone, rubbish etc. with all lead & lifts as directed by Eng-in-charge.
M&L ofr fine dressing of ground spreading and mixing with the good earth (excavated / imported) & Manure (organic manure / cow dung / Sludge) in the ratio of 8:1 (08 part of stacked volume of good earth & 01 part of stacked volume of manure). Cost of manure / sludge and good earth if needed to be paid separately, after reduction of 20% of stacked volume of good earth & 8 % stacked volume of manure. Each pit to be mixed with antitermite chemical / granules Thimet 10 G @ 50 – 100 gms / pit. If termite persists repeat the treatment after 06 months by surface spreading the chemical.
Supply of Korean carpet grass by laying direct matting complete all as directed by Eng-in-charge.
Maintenance of lawn area, green & weed free for 01 Month with standard specification (after laying of korean grass vide item No.6 above)
SHRUB PLANTATION (SOLO) : Digging pits in all type of soils and refilling the same the good earth (excavated / imported) & manure (Organic manure / cow dung / Sludge) in the ration of 5:1 (05 part of stacked volume of good earth & 01 part of stacked volume of manure). Cost of manure / sludge and good earth if needed to be paid separately, after reduction of 20% of stacked volume of good earth & 8 % stacked volume of manure. Each pit to be mixed with antitermite chemical / granules Thimet 10 G @ 50 – 100 gms / pit. Name : Hexora, Nerium speces, Hibiscus spon.
SHRUBBARY PLANTATION: Digging pits in all type of soils and refilling the same with the good earth (excavated / imported) & manure (Organic manure / cow dung / Sludge) in the ration of 5:1 (05 part of stacked volume of good earth & 01 part of stacked volume of manure). Cost of manure / sludge and good earth if needed to be paid separately, after reduction of 20% of stacked volume of good earth & 8 % stacked volume of manure. Each pit to be mixed with ant termite chemical / granules Thimet 10 G @ 50 – 100 gms / pit. Name : Tikoms gadickowd, Uphorbia,Vukorosia.
i) Maintenance of shrub plantation for One month, replacement of sapling, causalities etc
HEDGE PLANTATION: Digging trenches of approved / desired size of L&W (45-50 Cms) X D (30-60 cm) in all type of soil . Railing the trenches with good earth (excavated / imported) Mixed with manure (cow dung / sludge / dump) in the ratio of 5:1 (05 part of good earth and 01 part of manure by stacked volume). Cost of manure / sludge and good earth if needed to be paid separately after reduction of 20% of stacked volume of good earth & 8% stacked volume of manure. For Termite treatment and Thimet 10G granules @ 100 gms / running mts. Flooding the trench with water and than rough & fine dressing of trenched area including removal of undesirable weeds & vegetation. Supply & plantation of approved varieties of hedge plant saplings. It should be well grown, fully established & disease free. Different colours of pernial flower plants Name : Durauta, Akalysha red or couloued.
Maintenance the hedge by regular watering, trimming & pruning etc for 30 days
BRICK EDGING: Edging with bricks (class-I) laid in (1:2:4), length wise, including required excavation, refilling, consolidating with hand packing and spreading surplus earth neatly within all lead and lifts
FLOWER BED (ANNUAL): Blue moon, Exora Dwaul.
FLOWER BED (SEASONAL) : Marigold, White lilly.
TREE PLANTATION:
Digging pits in all type of soils and refilling the same with the good earth (excavated/imported) & manure (organic manure/cow dung/sludge) in the ratio of 3:1 (03 part of stacked volume of good earth & 01 part of stacked volume of manure). Cost of manure/sludge and good earth if needed to be paid separately, after reduction of 20% of stacked volume of good earth & 8% stacked volume of manure. Each pit to be mixed with ant termite chemical/granules, Thimet 10G @ 100-200 gm/pt.Avenue/flowering trees Pit SIZE 1mts x 1 mts x 1 mts (L X W x D)
Each pit to be added with 100 ms of Thimet 10 g granule, to control termite attack (repeat the treatment after 06 months, if termite persists.) flooding the pit basin with water, dressing including removal or rubbish & surplus earth, if any, with all lead & lifts.
Supply and Plantation of approved varieties of healthy, disease free, stout stem & well developed root system tree sapling of 5’-6’ height, with a clear minimum height of 4’-5’ from basin / ground level, after plantation. Staking the tree sapling upto ¾ height with appropriate strength of bamboo stick. Lower 1 feet of stake portion should be treated with anti-termite chemical. Trees : Royalpalece,
Maintenance of tree sapling, after plantation for 30 days or more as minimum guarantee period, for well establishment of tree sapling. Stacking to be continued till free sapling attains the stem strength. Replacement of saplings causalities immediately.
Potted Plants (Indoor ): Supply and arranging of healthy grown up plants in plastic pots Pots of 12” size with bottom plates. 1. Aracapalms - 10 Nos. 2. Ficusresnold - 10 Nos. 3. Furcriaearievated - 10 Nos. 4. Ficausnuda - 10 Nos. 5. Asparagussprengeri - 10 Nos. Maintenance includes regular watering, loosening of soil, manuring with organic manure and fertilizer mixture, spraying of insecticide and fungicide as and when required trimming and removal of dried leaves and decayed parts of plants to keep them in presentable shape for a period one year.
Potted Plants (outdoor): Supply and arranging of healthy grown up plants in earthen Cement pots of 12” size. 1. Bird of Paradise - 10 Nos. 2. Mussaenda - 10 Nos. 3. Bougainvillea - 10 Nos. 4. Exora - 10 Nos. 5. Eufhorbia Hybrid - 10 Nos. Maintenance includes regular watering, loosening of soil, manuring with organic manure and fertilizer mixture, spraying of insecticide and fungicide as and when required trimming and removal of dried leaves and decayed parts of plants to keep them in presentable shape for a period one year.
GOOD EARTH / COW DUNG MANURE: Supply and stacking of good earth / manure from approved source / field of approved quality / Ph & suitable for plantation work with all leads, lifts, carriage and royalty / taxes etc.,
M&L for GI pipe line 20mm dia medium grade laid in trenches, floors or walls with all fittings and fixtures etc.,
M&L for disposal of waste outside MD land all as specified and as directed by Eng-in-Charge.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and getting out in hard/ dence soil
M&L Plain Cement concrete Type D2 1:4:8 (40 mm graded aggregate) as in foundations, filling and mass-concrete
M&L 100mm thick Slat-glazed stoneware drain pipes laid in trenches and joints with CM 1:1 all as specified and as directed by Eng-in-Charge.
M&L for Cement concrete 1:3:6 type C-2 Concrete bed to 100mm drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested.
M&L Pre cast 1:2:4 (20mm graded stone aggrigate ) as in manhole cover Slabs set in CM 1:4 all as specified.
M&L TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
M & L for Fly Brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 m mean radius, built in CM 1:6 complete all as specified and directed.
M&L Providing, cement concrete Type C1 1:3:6 (20 mm graded aggregate) as in coping including rounded or chamfered on edges
M&L for rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, rendering is to be finished even and smooth without using extra cement.
M&L rendering 15mm thick on brick or concrete surfaes in CM 1:4 using integral waterproofing compound finished even and smooth without using extra cement complete all as specified and directed. Note:- Intergal waterproofing compound shall be measured and paid separately.
Supply only integral waterproofing compound.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick each layer all as specifed
Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point
M&L RCC M-25 (design mix) (20mm graded stone aggrigate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete
M&L RCC M-25 (design mix) (20mm graded stone aggrigate ) as in Columns, pillars, piers, posts and struts.
M&L RCC M-25 (design mix) (20mm graded stone aggrigate ) as in Beams, cantilevers, bressummers, lintels over 1.5m span
M&L RCC M-25 (design mix) (20mm graded stone aggrigate ) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like
M&L RCC M-25 (design mix) (20mm graded stone aggrigate ) as in Chajjas and the like
Use and wast Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter
Use and wast Formwork to sides of pillars, posts, struts, piers, columns, and stanchions of Square, rectangular or polygonal flat surface.
Use and wast Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping)
Use and wast Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.
Use and waste of Formwork to chullah hoods, chajjas, troughs and similar items including edges
M&L TMT Bars 8mm dia and below, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
All as per item No. 48 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders
M & L for Fly Brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 m mean radius,half brick work built in CM 1:4 complete all as specified and directed.
M&L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, rendering is to be finished even and smooth without using extra cement.
M&L for rendering 5mm thick in CM 1:4 concrete surfaces on ceiling, rendering is to be finished even and smooth without using extra cement.
S&FIInd class hard wood plain, solid, straight chowkats and frames wrought, framed rebated on solid, rounded or chamfered put together with glue pinned at joints complete all as directed by Engr-in-Charge.
S&F 2nd Class HW rail and style 35mm Thickness Factory made shutters Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated
S& F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing
S&F Factory made solid panel pace door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.
S&F mild steel butt hinges, medium weight cold rolled 100mm size complete.
S&F 200 mm aluminium anodized, barrel tower bolts of extruded section.Make : CROWN/JYOTHI/PRESTIGE
S&F 150 mm aluminium anodized, barrel tower bolts of extruded section. Make : CROWN/JYOTHI/PRESTIGE
S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized complete.
S&F 300mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete.
S&F steel window with side hung shutters fitted with box type hinges including MS handles, peg stays, MS guard bar made out of 10 mm square bar, glazing bars dovetailed or welded for receiving glass and including painting with one shop coat of zinc chromate primer including cutting holes in wall for fixing the window lugs in PCC 1:2:4 type B1 using 20mm graded stone aggregate and making good the disturbed surfaces in CM (1:3) complete including preparation of surfaces and applying two coat of synthetic enamel paint including taking down existing window complete all as directed.
S&F mild steel work as Bands, straps, hold fasts and similar small articles conforming to Fe410-0 or Fe 310-0
M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering
M&L 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate)as in bedding layer of floor.
M & L for 50mm thick plain cement concrete type C-2, 1:3:6(using 20mm graded stone aggregate) as in floor, Plinth Protection, foot path etc complete including necessary form work and finishing exposed surface fair and even complete all as directed by Engr in Charge.
M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc over 15mm thick screed bed in CM 1:6, jointed and pointed in white or coloured cement to match with the colour of tiles complete all as directed by Engr-in-charge.
M&L for glazed multi coloured glazed ceramic tiles incl border of size 350x250x7mm/450x 350 x 7mm thick as in vertical surfaces such as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles laid on and including 10 mm thick rendering in CM 1:4 on fair faces of brick/ concrete surfaces complete all as specified and as directed by Engr-in-charge.
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer all as specified and directed by Engr-in-Charge.
M&L for preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of primer all as specified and directed by Engr-in-Charge.
M&L for preparation of new plastered surfaces of walls and applying two coats of Cement base paint over a coat of primer all as specified and directed by Engr-in-Charge.
M&L for preparation of new or previously untreated surfaces of wood or wooden based sufaces of any description, not otherwise described, over 10 cm width or girth and applying Two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engr-in-charge.
Preparation of New or old previously untreated surfaces Surfaces of any description, over 10cm in width or girth and applying two coats of Synthetic enamel (ordinary tint) (each coat) over a coat of red oxide all as specified not otherwise described
S & F vitreous china wash hand basin, white, flat back of size 550x400 mm excluding taps, waste, chain and plug and procelain stopper but including bracket and waste fittings, brass, CP 32 mm dia complete all as directed by Engr in Charge.
S & F vitreous china wash down water closet pan (pedestal pattern) (EWC), white including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device and fixing bolts complete all as directed by Engr in Charge.
M&L Vitreous China urinals, Half stall type (back to corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)
S & F 10 litres capacity, PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as directed by Engr in Charge.
S & F 15 mm dia Bib taps, cast copper alloy chromium plated Fancy type with capston head handle, screwed down, screwed for iron pipe complete all as directed.
S & F 15 mm dia stop valves, Fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe complete all as directed by Engr in Charge.
S & F 15 mm dia Fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shank and fly nuts, screwed for iron pipe complete all as directed by Engr in Charge.
S & F PVC connections 15mm size with PTMT nuts of length 450mm long.all as specified and as directed
S&F 32mm dia High density polyethylene pipes (HPDE) of pressure rating 6Kgf/cm2 fixed complete to walls, ceiling or in floors etc.
S&F 15mm dia GI steel tubes, medium grade with all fitting and fixed complete to walls and ceiling or laid in floors all as specified and as directed.
S&F 20mm dia GI steel tubes, medium grade with all fitting and fixed complete to walls and ceiling or laid in floors all as specified and as directed.
S & F ball brass valves of 25mm dia, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule complete.
S&F 1000 ltrs of Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I
S&F of 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement
S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement
S&F of Grating doom 100 mm dia of PTMT (Minimum weight 25 gms)
S&F of Grating square 150 mm size of PTMT (Minimum weight 100 gms)
S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as directed by Engr in charge.
S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as directed by Engr in charge.
S&F 110mm dia PVC bends/shoes suitable to PVC rain water pipe including necessary clamps etc fixed on wall all as specified and directed by Engr in Charge.
S&F 75mm dia PVC bends/shoes suitable to PVC rain water pipe including necessary clamps etc fixed on wall all as specified and directed by Engr in Charge.
S&F 110mm borePVC (SWR) vent cowl
Dismantling doors, windows and clerestory windows Of area beyond 3 sq. metres (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead
Supplying and fixing rolling shutters 80x1.25 mm M.S. laths with 1.25 mm thick top cover of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.
M&L for providing and fixing ball bearing for rolling shutters / sliding shutters
Design, supply, erect, testing & commissioing of motorization including motor & mechanisation equipment for existing mechanical rolling shutter (any size upto 1MT weight) in one single phase 220V, 50Hz, 0.5 HP/400 W unit with 1 Ton lifting capacity by assembly with new cylindrical type rolling assembly with new centre rod connected to the suitable bearing and chain crank in absence of power complete with ball bearing and springs which enable minimum cost of maintenance with single phase push button starter with all connection, copper wiring complete, limit switches, control wiring with copper conductor including necessary addition / alteration civil works etc., complete all as specified and directed.
Demolishing cement concrete Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead
M&L PCC 1:2:4 using 20mm graded stone aggregate as in filling, mass concrete, flooring or in sub base.
M&L structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
M&L rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates
All as per item No.105 above but fixing only
M&L for point wiring with single core FRLS PVC insulated unsheathed 1100 volt grade cable with multi strand copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC concealed conduit, medium grade, ISI marked not less than 20mm dia, concealed in wall, ceiling with GI saddles GI screws, rawl plugs (concealed conduit wiring) with all fittings including Tee, Junction boxes and provision of pressed steel terminal box powder coated of suitable size with 3 mm thick laminated sheet cover for mounting switch sockets and regulators and drawing continuous earth wire of FRLS PVC insulated unsheathed 1100 Volts grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) complete all as specified. Note: Cost for cutting, chasing and making good to existing surfaces are deemed to be included in the Quoted Rate.
One light point controlled by one SP switch
One fan/exhaust fan and wall mounted fan point controlled by one SP switch.
All as per item No.107 above but for one 3 pin socket out let, 6 Amps on same board with the cable 1.5 Sqmm size.
S&F socket outlet 5 pin, 6 amps flush type complete all as specified and as directed by Engineer-in-Charge.
Supply & Fixing modular switch 6Amps 1 way 1 , 230 V , 50 Hz module complete all as specified and directed.
S&F ceiling rose surface bakelite 2 to 3 terminals 65 x 50mm complete all as specified and as directed by Engineer-in-Charge.
S&F 20/22W, 230V, 6500K CCT surface and wall mounted integral LED batten extruded alluminium housing with inbuilt electronic driver and including connecting up with twin core twisted flexible copper condctor cable from ceiling rose to fitting all as specified.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed.
S&F sheet metal enclosures for MCBs, single pole and neutral, 04 ways 240 Volts double door type complete all as specified and directed by Engineer-in-Charge.
S&F MCB SP 6 to 32 Amps, 240 Volts complete.
S&F MCB SPN upto 32 Amps ,240 Volts complete.
Supply and lay cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armored, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 sqmm; 2 core complete all as specified and directed.
Supply and lay pipe galvanized, “Medium grade”, including fittings 20 mm (3/4”) dia complete all as specified and directed.
Supply and fix Gun metal gate valves with iron wheel head screwed down both ends for iron pipes, fittings of size 20mm dia complete all as specified and directed.
Material and labour for Drilling and tapping cast iron water mains (in position) for taking branch connections of the internal dia up to 20 mm complete all as specified and directed.
M&L high mast structure of 16M height suitable for 55 m/sec wind speed along with head frame made of BS-EN 10025 hot deep galvanised as per BS EN ISO 1461 with 520mm dia and 25mm thick base plate for top section 20 sided of two sections. The top section should be 3mm thick and bottom 3mm thick with door opening at base of mast as per manufacturer specification. The base plate should not less than 520x520x25mm with 06 Nos bolts of 24mm dia,850mm long and provision with lantern carriage made out of 40NB ERW Class B MS pipe with 450mm Internal Dia with 8Arm welded of two sections carrying luminaires, 350 Kgs SWL with double drum which operated by motor 0.75 HP or manual, provided stain less steel wire rope grade AISI-304, 5mm dia of 7/19 construction for lantern carriage of 02 Nos of double durn which, 1450 Kgs per stainless steel rope of breaking capacity and providing of power tools integral motor re-reversible, 260 RPM, 415 Volts and adjustable torque limiter all as directed along with+D18d 01Nos of LED Aviation light of 9W, with inbuilt LED watch 230'A' Inbuilt Photo switch conforming to ICAO Annex 14,Type-A, >10Candela @360degree, 1KV PIV protection along with all mounting spared required to fix the light on top . The job includes Necessary foundation PCC /RCC work, removal and returning, refilling of solid etc with the following specification complete all as per manufacturer specifications and drwaings.The contractor shall submit the drawings of Base foundation to Accepting Officer for scrutiny and approval. Make for high mast : Bajaj/Crompton and comprising the following specifications :-
a) Excavation in soft/loose soil of size 2.30x2.30x1.5 mtr b) PCC 1:4:8 type D-2 of size 2.30x2.30x0.10 mtr c) RCC M-20 as in mat slab of size 2.10x2.10x0.30 mtr re-inforeced with 12mm top bars with stirrups 8mm for @b 190mm c/c. d) RCC M-20 as in pedestal of size 1.00 x1.0x1.40 mtr (1.10 mtr below ground level and 0.30 mtr above ground level) re-inforced with 20 Nos of 12mm top bars with stirrups 8mm for @ 190mm c/c. e) Galvanised Bolts and nuts of length 850mm and 24mm dia duly painted with anti corrosive paint - 06Nos fixing in the pedestal as per manufacturers drawings. f) Double wall Corrugated HDPE pipe of min dia 75mm for cable entry of length as required at site. g) Supply, Installing and errection of LT feeder pillar box 415V,32Amps,50Hz for high mast outdoor type stand mounting Dustand vermin proof, IP- protected fabricate with CRCA sheet of 3.15mm thick powder coated finish after pre treatment and painting the stand with anti-corrosive black enamel paint with all bottom entry gland plates, base stand made with 40x40x5mm thick equal angle iron duly label with aluminium anodised duly provided with MCB 32Amp TPN as incomer, Contactors, Timer switches, Push buttons, Toggle switches with all incoming and outgoing cable entries including locking arrangements including multicore copper conductor cable for above fixtures etc complete as required.
M&L for Earthing with GI earth plate electrode 600x600x6 mm buried directly in ground vertically to a depth of not less than 2.25 mtrs below ground level with the top edge not less than 1.5 mtrs below ground level connected to GI earth strip of size 25x4 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel protected by40mm dia GI pipe light grade including necessary excavation and earthwork, PCC 1:3:6 type C2 (using 40mm graded stone aggregate) for earth pit and RCC covers 1:2:4 type B1 (using 20mm graded stone aggregate) with 8mm dia TMT bars @ 100mm C/C both way, 20mm dia GI watering pipe medium grade, funnel, mesh, salt, charcoal complete and frame work complete all as shown in electrical plate No. 3 of MES Sch `A' Part - I complete all as directed.
Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia GI pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.
Supply and laying XLPE UG LT cables, insulated, PVC sheathed aluminium conductor multi stranded armoured heavy duty 1100 Volt grade for the following cable sizes all as directed. 25 sqmm 4 core
Excavtion in trenches soft/lose soil nexc 1.5mtr wide and not exc 1.5mtr in depth etc complete and getting out, trimming the sides, forming bottom surfaced as required level complete all as specified and directed by Engr-in-charge
M&L double wall corrugated HDPE pipe of 40mm dia for cable protection laying in trenches complete all as specified.
Drilling holes under hard standing /road for laying pipe for cable etc by means of manual and without disturbing the top surface and making good the disturbed surface if any complete all as specified
S&F light grade GI pipe for protection of UG cable of size 50mm dia all as specified. Make :Tata/Jindal/Prakash
S&F LED flood light 120Watt, 220V , 50HZ, IP-66 Ingress Protection with lumious efficacy of 120lm/W, 5700K CCT , <10% THD, 10KV surge protection, high power LEDs as light source pressure die cast housing with inbuilt optic lenses for uniform distribution complete fixing on mast using necessary spares as required at site. Make: Bajaj Cat Part No. PRAZE F 144L WH NB-A5 TG SD or equivalent in Wipro/ Philips
M&L for steel tubular swaged pole type 410, SP-22 (9 meter long) and painting with two coats of aluminium painting over a coat of red oxide primer & white wash for PCC coping complete
M&L for Erection of steel tubular or rail pole strut in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling and secured with holding clamps, bolts, nuts, etc. as required
Providing and making steel pole collar with cement concrete (1 cement : 3 coarse sand : 6 stone aggregate 20mm) of specified size and shape including form work, plastering if required, curing etc as required.
Supply and fixing LED street light fitting 90 Watt 230 V AC,5700 K CCT 10KV SPD,> 100lm/watt outdoor type with high pressure die cast aluminum hosing and heat resistant complete with electronic driver multiple optics high perfomance street optic lens for uniform light disribution complete with IP 65/66 protection complete. Make :Shakthi cat part no SZPSLPM090 Or equivalent in crompton/ philips/ Havells
S&F GI pipe for street light with 4 Feet mast arm for poles SP-31 as per the site requirements fixing on top of the pole with necessary nuts and bolts complete all as directed.
S&F SMC junction boxes (weather proof) IP 66, on street light poles size not less than 295mm x 195 mm x 100 mm size with connector for connecting incomming and outgoing of cable including provision of 01 No of MCB SP 1 Amps to control the pole light circuit and MS brackets made out of 32 x 4 mm flat for fixing the box on post complete with nuts, bolts and washers and suitable size of cable glands for incomming, outgoing of cable Complete all as directed.
Supply & laying only heavy duty armoured, XLPE,LT underground cable of size 16 sqmm 4 core 1100 V grade,PVC insulated ,PVC sheathed ,multistranded aluminium cable of folllowing size in pipe /trench/cable duct/fixed on wall by proper size shaped GI clamps with nut bolts etc including lugs for both ends and making good the disturbed surfaces complete all as specified and directed.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in hard/ dense soil for foundation of poles, structures, stay rods, laying of underground cable etc complete all as directed.
Supply and lay double wall corrugated (DWC) high density polythene pipes having corrugation on the outer wall and plain surface on the inner wall confirming to ISI 14930 ( Part I and II) for protection of underground cables. Outer dia of pipe 63 mm with all fittings. laid in trenches / road/ nallah or fixed along wall. poles or laid under floor (including cutting floor/Road and making good to match with existing adjoining surface etc for cable protection all as specified. (Excavation and earth work shall be measured and paid separately).
Supply only PVC insulated copper conductor FR grade 2.5 sqmm,three core cable, ISI marked.
Supply and installed air cooled split unit inverter type Air conditioner electric driven single phase of capacity of 2.0 TR (5 star rating) Make: Blue star/Voltas/Hitachi
Supply and fix voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stabilized at 230 V with accuracy of + 2.5% and capacity 5 KVA Make: V-GUARD/PREMIER
M&L for wiring for circuit/ submain wiring alongiwth earth wire with the of size 2 x 4 Sq.mm + 1x4Sqmm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit 20mm dia as required.
Supplying and fixing 20A, 240V, SPN industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20A "C" curve, SP MCB, in Sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
M/s ANUSHA ENTERPRISES
SHAH ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .