M/o various colonies under Nazul A/C-II Dwarka Zone

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. a) All kinds of soil.

Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m. a) All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : a) 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : a)1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)

Providing and laying at or near ground level factory made C& D Waste kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Providing & Installing the Mini Play House of make ARIHANT /KOMPAN/ LANDSCAPE STRUCTURES /OK PLAY/LEO/ KAALIA.or equivalent brand as approved by Engineer-in -Charge of size 6.0x1.80mtr with Slide. Main Frame made of Round 80 NB Pipe Having min "B" class G.l. pipe. All the pipes should be ISI Marked (as per the IS 1239/2004) & of reputed brand. Ensuring the strength, durability, stability & long life to the kids structure with safety as paramount. Deck: having 1035mm x750mm with collar of 65mm size made of perforated sheet. Hydraulic Precision punched holes made of min 10mm NB with sheet thickness of approx. 2.5mm. Components:- FRP (Fiber Reinforced Plastic) Main Sunshine Line designer Roof having min 2- 4 layers (approx.4mm thickness) with bright colors being UV resistant ladder main frame made of round pipe 25mm NB pipe & Ladder rungs made of 15mm N.B. pipe having width of 400mm x 70mm(approx.). All the pipes should be ISI marked (as per the IS1239/2004) & of reputed brand. Tree climbers made of main frame pipe of 25mm NB round pipe & rungs made of 20mm NB round pipe. All the pipes should been lSI marked (as per the IS 1239/2004) & of reputed brand. Spring coil climber: made of main frame pipe or z3mm NB round pipe & springs made of 20mm NB round pipe. All the pipes should be lsI marked (as per the IS 1239/2004) & of reputed brand. A Rot molded plastic LLDPE made Line panel with UV stabilized color fading resistant. Having size of 1035mm x 750mm & thickness of 70mm heavy &strong for long term durability & great aesthetic look & finish, Safety panel fitted on M.S round pipe 20mm N.B. with size of 1035mm(1)x75Omm(W) having wall thickness 70m. Slide having height of 1220mm approx & length approx 2mtr made of metallic GI sheet of high strength having width of 400mm mounted on M.S angle support of 40x40x4mm & 5nos angle supports & 20mm N.B. round pipe hand rail, The ladder step of metallic slide should made of MS rectangular pipe of 70x23mm in minimum thickness of 2mm with vertical hand rill support of size 20mm N.B GI pipe with other necessary supporting pipes. The complete structure mini play house should be powder coated with minimum powder coating thickness of 60-80 microns. Safety panel/top canopy should be also attached with help of colorful nylon clamps. Accessories: Nut bolts- All approved GI nut bolts Galvanized Iron with high Tensile Strength. Kid capacity 2-8 Nos. All Complete as per direction of Engineer-in Charge including maintenance cost for 1st Year.

Providing & Installing the Double Arch Swing of make ARIHANT /KOMDAN/ LAND SCAPE STRUCTURES PLAY/LEO/KAALIA of size 3.10x1.50mtr. Main Frame:- Main Cross Bar made of round 75mm O.D. pipe and legs made of SOmm N.B. pipe Legs- Arch shaped bended (Must be min in GI"B class pipe). T pipe will be required for the Cross bar. All the pipes should be ISI marked( as per the IS 1239/2004) & of reputed brand. Ensuring the Strength, duability, stability & PAN long life to the Kids. structure with safety as paramount. Seats- Belt Type Seats made of Synthetic Rubberized material/Fiber reinforced fabric materials of Virgin Reinforced material & also duly with UV resistant colors, Chain Made of approx 6mm thick GI chain with rubberized coating of with 3 mm minimum thickness, Chorme plated supporting hook for belts Hooks for convenience & height adjustment/ Seat Movement, self lubricated council type bush baring clamps provided with rubber coated chain to be hang the complete belt assembly. The complete structure double arc swing should be powder coated with minimum powder coating thickness of 60-80 microns. Accessories: Nut bolts to be used All approved GI nut bolts Galvanised Iron with High tensile Strength. Kid capacity 2-4 Nos. All Complete as per drawings attached/as per the direction of Engineer-in Charge including maintenance cost for 1st Year

Providing & Installing the SEA SAW DOUBLE of make ARIHANT /KOMPAN/ LAND SCAPE structures /OK PLAY/LEo/ KAALIA or equivalent brand as approved by Engineer-in -Charge of size 2.0x2.50mtr.Main Frame: made of see saw made of 50mm NB pipe with planks made of 40mm NB pipe and supports made of 20mm N.B. pipe, all the G.I pipes should be "B" class & ISI marked (as per the IS 1239/2004)& of reputed brand make & Ensuring the Strength, durability, stability & long life to the kids structure with safety as paramount. Seats - Seat Made of FRP (Fiber Reinforced Plastic), duly UV resistant colors, all chemicals in the FRP material should be best quality, the Fiber Mat of 450GSM to be used for strength & stability with supporting frame. FRP Seat size (approx.) 10"(L) x 8" (W) with back rest. The complete structure see saw double should be powder coated with minimum powder coating thickness of 60-80 microns Accessories: Nut bolts- All approved GI nut bolts Galvanized Iron with High tensile Strength Kid capacity 4 nos. Complete as per drawings attached. All Complete as per the direction of Engineer-in Charge including maintenance cost for 1st Year.

Providing & Installing the SINGLE WAVE CLIMBER of make ARIHANT /KOMPAN/ LAND SCAPE STRUCTURES/OK PLAY/LEO/KAALIA or equivalent brand as approved by Engineer-in -Charge of size 1.75x0.80mtr. Main Frame: Main Frame of single wave climber pipe made of round 32mm NB pipe (Must be min in G I1 "B" class pipe) and rungs made of 20mm N.B. Pipe-'U Shaped bended( will thickness approx. min 1.5mm-2.2.mm only), All the pipes should be ISI marked(as per the IS 1239/2004 & of reputed brand & Ensuring the Strength, durability, stability & long life to the kids structure with safety Paramount. The complete structure single wave climber should be powder coated with minimum powder coating thickness of 60-80 microns Accessories: Nut bolts- All approved GI nut bolts Galvanized Iron with High Tensile Strength Kid Capacity -2 to 4 Nos. All Complete as per the direction of Engineer-in Charge Including maintenance cost for 1st Year.

Providing & Installing the TODDLER SWING of make ARIHANT/KOMPLAN/LAND SCAPE STRUCTURES/OK PLAY/LEO/KAALIA or equivalent brand as approved by Engineer-in -Charge of size 2.40x1.5Omtr. Main Frame: - Main Cross Bar of toddler swing made of round 65mm NB pipe and Supporting T Bar made of 50mm N.B. Pipe (main cross bar & T supporting Bar should be in GI "B" class pipe All the Pipes should be ISI Marked( as per the IS 1239/2004) & of reputed brand make, with good wall thickness. Ensuring the Strength, durability, stability & long life to the kids structure with safety as paramount. Seats- Bucket Type Seat Made of Synthetic Rubberized material or Virgin Plastic material & also duly with UV resistant colors, Chain Made of approx 6mm thick G,I chain with rubberized coating of with 3 mm minimum thickness, Chrome plated supporting hook for belts Hooks for convenience & height adjustment/ Seat Movement, self lubricated council type bush baring clamps provided with rubber coated chain Toddler Swing to hang the complete bucket assembly the complete structure should be powder coated with minimum powder coating thickness of 60-80 microns. Accessories: Nut bolts to be used All approved GI nut bolts Galvanized Iron Uriah High tensile Strength. Kids capacity 2 & Recommended Age Group - 2 to 8 yrs. All Complete as per drawings attached/as per the direction of Engineer-in Charge including maintenance cost for 1st Year. kida capacity 2 & recommended age groupe 2 to 8 years. All completedas per the diretion of engineer-in-charge including maintance cost of 1st year

Providing & Installing of Four seater Merry Go Round of Make ARIHANT/KOMPLAN/LAND SCAPE STRUCTURES/OK PLAY/LEO/KAALIA or equivalent brand as approved by Engineer-in -Charge of descriptions as: - • Product Area: 2.1m Dia (7 ft Dia.) • Safe Play Area: 3.1m Día (10.2 ft Dia.) • Ideal For: 3-8 Years • Friends at a time: 4 • Technical Specification:-- • MGR frame: MGR Frame made from 40NB G.I. pipes welded together with bottom end over a circular plate meant for assembling bearing assembly. The top end of the pipe is welded with a ISF & a plate for mounting the ROTO/FRP Seats over it. The four 40NB pipe are hold together with four 25NB pipe to form a strong structure. The GI plated bowl is used to cover the top of the bearing assembly. • Seat frame :20NB GI pipe bend and joint to form a frame structure with flat plate to mount seat. The frame is bolted to the MGR frame outer end. The frame is provided with spacers for foot rest. Hand Grip conforming to EN1176-1:1998. • Bearing assembly: Bearings are oil sealed, self-lubricated made of SKF/ NTN/ NACHI/FAG/NRB make shall be provided for smooth & trouble-free movement. The whole structure is mounted on heavy-duty bearing shaft. • Centre support: 80NB hot dip galvanized centre support pipe of length 500mm with GI thickness of 40- 60μ This pipe is welded with a 150x150mm base plate at bottom for fixing the foundation angles ISA & Circular plate on top for assembling the bearing. • Seat: MGR seat is made up of Fibber reinforced plastic (FRP)/LLDPE. Seat designed to accommodate one child per seat with backrest; The seat is bolted to the assembly with special structure. • FRP Product: FRP Material coated with Gel coats which is duly mixed with U.V stabilized pigment to give the required colour to the product. Thickness of the FRP material varies from 3 mm to 5 mm as per the product. • Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness up to 40-60 micron. • Powder coating it shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. • Nut and Bolts: Galvanized/ SS/Allen Bolt/Button Head Allen Bolt & Nuts /Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI/ PVC caps for user safety against entrapment. Certificate: ISO 9001:2015 All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer excluding earth work, c:c work up to plinth level, c.c block 1:1½:3 (1 cement: 1½ coarse sand: 3 graded stone aggregate 20mm nominal size) of required size as per guidelines.

Maintence charge for childern play equipments a) for 2nd year

Maintence charge for childern play equipments b) for 3rd year

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: a) All kinds of soil

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade a) Two or more coats on new work

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Manufacturing, supplying and fixing retro reflective signage boards made up of 4 mm thick aluminium Composit material Sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D- 4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of ACP sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-incharge.(Structural frame work to be provided separately. Rectangular area of the sheet only shall be measured for payment).

robin construction com

Fair Deal Creation and Marketing