Construction of 4No office Blocks 6 No passanger sheds 2 No Guard Rooms at General Bus Stand Parimpora Srinagar

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 min width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides andramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, including dewatering if necessary. (All kinds of soil)

Providing & laying stone soling (hand packed) incl. ramming, watering, and all sorts of carriages complete.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, andings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.

Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms.

Centering and shuttering including strutting, propping etc. and removal of form for:Edges of slabs and breaks in floors and walls. Under 20 cm wide

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Supplying and filling in plinth with sand under floors, including watering, ramming consolidating and dressing complete.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class deodar wood

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. 50mm thick with 20mm nominal size stone agg.

Providing and fixing 35mm thick glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. First class kail wood

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : First class kail wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. 1st class kail wood.

Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

P/F Hardware Aluminium fittings , anodised anodic coating of good/approved quality with necessary screws Complete job. Handle 125 mm

Handle 100mm

100x10mm tower bolts

150x10mm tower bolts

Aldrops 150mm

Aldrops 300 mm

Eye window hooks 150 mm

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand)

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm

Applying priming coat of water thinable cement primer of approved brand and manufacture on wall surface

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5m

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing/ fixing of anchor bolts 32mm dia and 900mm long duly welded with 10mm thick plate.

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gram/m2

Providing/Fixing Ornamental garden benchs of standard manufacture duly spray painting of different locations fixed in cement conc. Blocks of1:2:4(cement:2coarse sand :4 graded stone agg 20mm nimial size) with following minimum specifications ; Area=1500x610 mm. length= 1500mm. Height =710 mm(approx). Main frame and sides of ornamental cast iron seat and back seat.seat and back seat shall be 1.6mm(16SWG) thick rectangular iron tube not less than 50x25mm the number of these iron tubes shall not be less than 13.All Complete.

Structural steel work in builtup sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded.

Providing and fixing precoated galvanized iron profile sheets (size, shapeand pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 grams per sqm as perIS: 277, in 240 mpa steel grade, 5-7 microns epoxyprimer on both side of he sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches duringtransportation and should be supplied insingle length upto 12 metre or as desired by Engineer-in-charge. The sheet shallbe fixed using self drilling /self tapping screws of size (5.5x 55 mm) withEPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete: Ridges plain (500 - 600mm). Valley of 90cm width.

Providing and fixing plained eaves boarding. 250x32 mm (nominal size). 2nd class kail wood.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position Budloo wood.

Providing and fixing ready made well finished imported T&G type wooden paneling for siffits complete job.

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing,staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube.

Providing /fixing G.I pipes complete with G.I fittings and clamps, including cutting, and making good the walls etc concealed pipe including paintting with anti corrosive bitumastic plain, cutting chases and making good the wall. 15mm dia nominal bore.

Providing and fixing ball valve (brass) of approved quality, High or low presure, with plastic floats complete. 15mm nominal bore.

Providing and fixing of 15mm bore G.I Tanky nipple complete.

Providing and fixing G.I Union in G.I pipe including cutting and threading the pipe and making long screws etc. complete (new work) 15mm nominal bore.

Prroviding and fixing 15mm nominal bore C.P brass bib cock of approved quality conforming to IS:8931.

Providing and fixing 15mm nominal bore C.P brass angle valve for basin mixer and gyser points of approved make conforming to IS:8931.

Providing and fixing 15mm nominal bore C.P Stop cock (concealed) of standard design and of approved make conforming to IS:8931.

Providing and fixing of PVC flexible connections of 18"-24" size complete.

Providing and fixing C.P gratings of approved quality.

Providing and fixing of towel rod of approved quality complete.

Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fitting complete. Flexible pipe 40mm dia.

Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board fixed to wooden cleats with C.P brass screws and washers complete.

Providing and fixing of C.P brass wall mixer of approved brand 15mm nominal bore.

Providing and fixing C.P brassn long nose sink mixer of approved brand. 15mm thick nominal bore.

Providing and fixing of Hot water gyser of approved brand and manufactured including all fittings complete job. 50 liters capacity (recold Make).

Providing /fixing various PVC pipes and fittings of approved quality and make complete job. 100mm bore pipe

100mm bore floor trap

100mm size door tee

100mm size palin bend.

100mm size collar

75mm size collar

75mm Dia pipe

75mm floor trap

75mm door tee

75mm plain bend

Providing electrification using standard PVC coated copper wire,PVC Conduits with all necessary accessories and gadgets of approved quality and make complete job. Lighting Point

Heating Point

Bulk heads

MCB 6-32amp

MCB panels

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level whiteP.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, includingpainting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040mm bowl depth 250mm

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Carriage of materials by mechanical means For 40mm aggregate from Athwajan an average Lead of 15 kms

20mm aggregate from Athwajan an average Lead of 15 kms

For Sand from an Ganderbal average Lead of 21 kms

Bricks from pampore av lead 23Kms.

MIR CONSTRUCTIONS