WBPWD/EE/KNHED/e-NIT-35/24-25

Amount

Dismantling the the existing old wiring with the CO's own tools & tackles and submit the dismantled items at the store not more than 1.6 Km distance.

S& F of 415 V 250 A TPN SFU Main Switch with sheet steel enclosure on angle iron frame.( Make: ABB/Siemens/Schneider)

S & F of 415 V 200 A 35 KA MCCB with enclosure thermal release & under voltage protection fixed on wall with angle iron support ( Make: ABB/Siemens/Schneider)

S & F of 415 V 100 A 25 KA MCCB with enclosure thermal release & under voltage protection fixed on wall with angle iron support ( Make: ABB/Siemens/Schneider)

S & F of 415 V 63 A 25 KA MCCB with enclosure thermal release & under voltage protection fixed on wall with angle iron support ( Make: ABB/Siemens/Schneider)

Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – ( As per Drawing no. 470 of PWD Specification Book – May 1991 )415 V, 315 A,4 Bar Dimension of Cu. Bars-4 x 40x5mm of 1 mtr length Dimension of Sheet Metal Box- 1500mm x150mm

Supplying & Fixing iron beam fan clamp of two piece type, as per approved specification, fabricated from 40 mm x 9 mm MS sheet flat suitable for beam having flange upto 150 mm wide – (As per Drawing no. 476 of PWD Specification Book – May 1991)

Supply & Fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support.(b) 300x50x1.25mm (18SWG) ( with angle iron support)

Supplying and laying on wall of 1 Core 10 Sqmm Copper Flexible Cable ( Make- Gloster/Havells/Ploycab)

Supplying and laying on wall of 1 Core 70 Sqmm Copper Flexible Cable ( Make- Gloster/Havells/Ploycab)

Supplying and laying on wall of 4 Core 50 Sqmm Copper Flexible Cable ( Make- Gloster/Havells/Ploycab)

Supplying and laying on wall of 4 Core 35 Sqmm (Al/Ar ) Cable (Make- Gloster/Havells/Ploycab)

Supplying and laying on wall of 1 Core 95 Sqmm Copper Flexible Cable ( Make- Gloster/Havells/Ploycab)

Supplying and laying on wall of 4 Core 185 Sqmm (Al/Ar ) Cable ( Make- Gloster/Havells/Ploycab)

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : (i) For 4core 185 sqmm

(ii) For 4core 35 sqmm

Finishing the end of following XLPE/PVC armoured cables bycrimping method incl. supplying and fixing solderless socket(Dowels make), tapes, anticorrosive paste & jointing materials (i) For 4core 185 sqmm

(ii) For 35 sqmm 4core

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. 10 sq mm

Supplying and fixing 415V 6/10A, 6 way TPN MCBDB comprising with of 1no. 63A FP Isolator and 18 nos.,(6- 32) A SP MCB with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (Make: Legrand /Siemens/ ABB )

S&F 230V 6/10A, 2+10way SPN MCBDB comprising of 1no. 40A DP Isolator & 10nos. 6/10A SPMCB as per G.S.(For Record, Sister In charge Room) (Make: Legrand /Siemens/ ABB )

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Gloster/Havells/Polycab) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switchfixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [Average run 8 mtr] 2(c)/E-14

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Gloster/Havells/Polycab) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish On Board

Supply & Fixing 240 V, 2 nos. 6A and 2 Nos. 16 A plug socket with separate 2nos. 6 A and 2 Nos. 16 A Piano key type switch, indicator & 25A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 300x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing of a fabricated set consisting of 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 200x120x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing of a fabricated set consisting of 240 V, 1 nos. 6A, & 1 nos. 20A plug socket with separate 1 nos. 6 A & 1 nos. 20A Piano key type switch, on sheet metal switch board embedded in wall incl. S & F 275x225x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing of a fabricated set consisting of 240 V, 2 nos. 6A, & 2 nos. 20A plug socket with separate 2 nos. 6 A & 2 nos. 20A Piano key type switch, on sheet metal switch board embedded in wall incl. S & F 275x175x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing of a fabricated set consisting of 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch with indicator & 16/20A MCB (Make-Legrand/Havells/L&T) on sheet metal switch board embedded in wall incl. S & F 275x175x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing of a fabricated set consisting of 240 V, 4 nos. 20A plug socket with separate 4 nos. 20A Piano key type switch with indicator & 16/20A MCB (Make-Legrand/Havells/L&T) on sheet metal switch board embedded in wall incl. S & F 275x175x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supplying and fixing 20mm PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works [7a/E-16]. 20 mm size

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Gloster/Havells/Polycab) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required 4 x 80/0.4(10 Sqmm) + 2 x 84/0.3 (6 sqmm) as ecc

2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC

2x36/0.3 (4 sqmm) + 1x22/0.3 (2.5 sqmm) as ECC

2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

3 x 1.5 Sqmm

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. 2.5 sq.mm [9i/F-5]

4 sq.mm [9iii/F-5]

6 sq.mm [9iii/F-5]

Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes(in mm ) flushed in wall as per GS 175 x 100 x 65mm

Supply & Fixing bakelite / perspex top cover on existing Inspection board by Brass screws 175 x 100 x 65mm

S&F AC machine timer for one no. machine febricated with double door 8 Way SPNDB) i) 240 V,32A DP MCB of breaking capacity 10KA & ''C'' Charecteristic -1 No ii) 40A DP power contactor with 240 coil voltage -2 No. iii) Digital timer switch-1 No iv) Toggle switch -1 No. Make: Siemens/Schneider/GIC/Legrand

S& F of a 3 phase single timer mini control panel within horizontal HTPN enclosure on wall comprising of i) 415 V AC 4 Pole 63 A power contractor ii)Dial type analouge timer 24 hour C type characteristics 230 V Ac Supply iii) 415 V 63 A 4 Pole MCb C- type-1 iv) 230 V AC toggle switch single pole double through 6 A-1 nos v) 415 v 63 A 3 way terminal -1 vi) 15 A 8 way phase & natural bar to be mounted on DIN rail with 1.5 necessary interconnection with suitable size Control & cu wire) ( Make: Siemens/Schneider/GIC/Legrand

S & f of Water proof PVC type outdoor Loop Box ( 250 x 200 x 105 mm) ( Make: Syntax/Hensel) having hinged type PVC top cover with rubber gasket & terminal. The bs shoud compriseing 1 no din rail for fixing 415 V ,63 A TPN MCB ( Legrand/Sienens/Schneider) and 63A 4 way terminal bar.

S & f of Water proof PVC type outdoor Loop Box ( 250 x 200 x 105 mm) ( Make: Syntax/Hensel) having hinged type PVC top cover with rubber gasket & terminal. The bs shoud compriseing 1 no din rail for fixing 415 V ,32 A TPN MCB ( Legrand/Sienens/Schneider) and 32A 3 way terminal bar.

Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment 2 Way [11/D-9]

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc. [Make- Legrand/Schneider/Siemens]

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.[Make- Legrand/Schneider/Siemens]

Supply & delivery of Full Metal Body & blade 450 mm Wall bracket Fan[Make- Orient/Crompton ] [NS]

Fixing only cabin fan on wall/ceiling by S& F rag bolts nuts & washers (6 mm dia x 62 mm long) or as required incl. S& F 24/0.20 PVC insulated flexible copper wire 0.5 mtr length.

Supply & delivery of 4ft T8/12 20W 100Lm/watt single LED fitting complete with 1×20W minimum100Lm/watt LED tube with external heat sink on ceiling with ceiling plate down rod etc. as required. (Philips/Wipro/ OSRAM/Lighting eTechology/Trilux) NB: LM 79 & LM 80 report to be submitted from the OEM

Supply & delivery of 4ft 22W twin LED fitting complete with 2×20W minimum 100Lm/watt LED tube with external heat sink on ceiling with ceiling plate down rod etc. as required.(Philips/Wipro/ OSRAM/Lighting Technology/Trilux) NB: LM 79 & LM 80 report to be submitted from the OEM

Supply & delivery of 4ft 20W LED tube minimum 100Lm/watt light with external heat sink.(Philips/Wipro/ OSRAM/Lighting Technology/Trilux) NB: LM 79 & LM 80 report to be submitted from the OEM

S& D of 2 x 2 ft , minimum 120 lm/watt ,30 watt, 5700-6500 K square type Recessed mounted fittings with diffuser ultra low depth and light weight 36 watt with L bracket/spring clamps option.[Make Philips/Wipro/ OSRAM/Lighting Technology/Trilux)] NB: LM 79 & LM 80 report to be submitted from the OEM

Fixing only fluorescent light fitting suspended 25 cm bellow theceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports incl.S&F EI conduit, ball socket/socket type ceiling plate and connecting the length of PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm) flexible copper wire of 1.10 mt. length. [C-2/15]

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/ perspex top cover incl. making necy. connections etc.( GS Page no. E6 item no. 18(a)).

S & F of Surface mounted 240 V 3-5 watt LED fiting with diffuser on wall ( RED COLOUR) Make: Philips/Wipro/Crompton

Supply & Fixing 1200mm celling Fan incl safety steel wire of minimum 18 SWG with its accessories with necessary interconnection as per EIC(Make : Crompton- Rivera 1Star/Orient)

S & F 23 cm (9'') sweep A.C. exhaust fan (EPC-heavy duty) after cutting after cutting holes in the wall and making good the damages and smooth cement finsh etc. as practicble as possible and providing necy length of PVC insulated Cu wire and making connections incl. S& F louver shutter necy. nut & bolts.

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board [20(a)/D-13]

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts.long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm diax 80 mm long GI bolts, double nuts, double washers incl. S &F 15 mm dia GI pipe protection (1 Mts. long) to be filled withbitumen partly under the ground level and partly above groundlevel driven to an average depth of 3.65 Mts. below the groundlevel as below:By TATA-Medium GI pipe

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Connecting the equipments to earth busbar including S & F GI 4 SWG(Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages

Earthing with Copper plate (610x610x3mm size) having weight of 9.84 Kg and 1 No. 25x5mm Copper strip (3.20 mt long) & 1 no. 6 sqmm PVC insulated stranded Copper wire (4 Mt long) incl. S & F 15 mm dia GI pipe (ISI-Medium) protection (4 mt. long) to be fillied with bitumen, partly under the ground level & partly above ground level to an average depth of 3.65 Mts. below the ground level and restoring the surface duly rammed incl. providing 3.0 mt long, 25 mm dia GI pipe (ISI-Medium) for periodic treatment, incl. providing masonery enclosure on the top of the earth electrode of overall size 86.36x86.36x46cm deep (below Ground level) complete with cemented brick work

(1:6) of 25 cm width, duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56x35.56cm with locking arrangement, GI reducer and treatment of soil by using salt & charcoal or coke for plate electrode

Supply & laying Cu earthling strips of following size for interconnecting the earthing stations, panels, DB's etc. on walls/ceiling, buried in ground as per direction of EIC. 25 x 6 mm Cu with PVC covering

SITC of 'Chemical maintenance free earthing pits with minimum 25kg x 2 nos =50KG of high conductivity carbon based backfill compound, 3 mts long, UL listed minimum 17.2mm dia earth rod with molecurly bonded 250 micron copper or clad copper on the outer surface with polyplastic earth pit chamber. [extra earth pits to be added if required to form a grid to reduce resistivity ] (Make- JEF/ True Power/ ABB)

Supply and fixing CU 50mm x 8mm and 300 mm long earth bar woth 8 nos holes with bruss nut bolt washer set fixing on wall on insulator chair along with all necessery accessories.

SITC of earth leakage protection circuit including Core Balalnce Core Transformer (CBCT) , Earth Leakage Relay and 250 mA class CC fuse on DIN rail fuse holder and necessery electrical connection with 1.5 sq mm FRLS Cu wire and the whole arrengment fixed in a 2+4 way Double door SPNDB as per direction of EIC. Make: GIC/Legrand

(Rate should be quotated including all taxes and duties and GST)

T.D.K. ENTERPRISE (BID ID -5462277)

ALPHA ELECTRICALS (BID ID -5476701)