ADDN / ALTN TO CERTAIN OFFICES IN HQ WAC BLDG AT SUBROTO PARK

Amount

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:2:4 type B-0 (Using 12.5 mm graded stone aggregates) of 25 mm thick as in leveling course ,finished surfaces even and rough to receive floor finish complete all as specified and directed by Engr-in-Charge.

M&L for Vitrified ceramic coloured (dark/light shade) tiles (600x600)x9/10mm thick in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match and including over screed bed or bedding layer of mortar 15 mm thick laying floor finished in cement mortor 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for Vitrified ceramic coloured (dark/light shade) (600x600)x9/10mm thick in skirting etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick plastering in CM 1:4 as in backing coat of tiles complete all as specified and directed by Engr-in-Charge.

M&L for Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. including nessesary preparation using wall care putty. Two or more coats on new work complete all as specified and directed by Engr-in-Charge.

S & F in Repair 'E' board(Design: LACK & hill) : 605x605x4 mm thick, white pre laminated set embossed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanized iron imposed grid with 24 mm wide T-section exposed flanges which shall be power coated white. The frame work shall be comprise of main runner made from 0.33 mm thickgalvanised steel sheet and of size 24 mm X32mmX300 mm board spaced at 120 mm maximum center to center, hangers of GI wire4 mm dia to be fixed by approved rawal plug level and fasteners and screws etc.,The last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall , flushing fitting of 1200 mm longer cross tee(with double stitching) to be interlocked between main runners at 600 mm center to center from 1200X600 mm modules cross tee longer than 600 mm to be supported independently . 600mm long cross tee centrally between the 1200 mm cross tee(with double stitching) to be interlocked between main runners at 600 mm center to center from 1200X600 mm modules cross Tee longer than 600 mm to be supported independently . The perimeter wall angle shall be 0.45 mm thick GS sheet of size 19 mm X 19 mm and 300 mm long of white colour all as per manufacturer's instructions complete all as specified and directed by Engr-In-Charge.

M&L for PVC profile for wall paneling of size 23cm wide, 8mm over all thick and 01mm wall thickness fixed with screw to mild square tubular steel frame work mad e out of MS Hollow section of size 25mm x 15mm x 2mm spacing 01 meter on both side frame work shall be fixed in wall with the help rawl plug and required length of screws and MS work shall painted with one coat of Red oxide primer for wall panelling,complete all as specified and directed by Engr-In-Charge.

Taking down chowkats or frames with shutters (with out taking of shutter from the frame) exc 1.5 sqm but n. exc 4sqm each , including making good damage portion complete all as specifed and directed.

Taking down chowkats or frames with shutters (with out taking of shutter from the frame) exc 1.5 sqm each including making good damage portion complete all as specifed and directed.

M&L for powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed by Engr-in-Charge.

Supply and fixing 4.8 mm thick ordianary quality sheet glass n.exe 0.5 sqm in each pane of glazing with oil putty /beading etc all as specified and directed by Engineer-in-Charge.

S&F for 0.56mm nominal dia wire galvanised mild steel wire cloth and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specifed and directed.

S&F for powder coated (minimum thickness of powder coating 50 micron) aluminum anodized three track sliding window with two or more shutter with 5 mm thick plane glass, one shutter of stainless steel mosquito proofing with good quality bearing ,handle lock,etc rubber beading and glazing clips etc using following sections as given in 'JINDAL' catlogue etc as specified as per manufacturer instructions with the following size, complete all as specified and directed by Engr-in-Charge. Note : Glass and wire not measured and paid separately however cost of all other connected accessories deemed included in unit rate. Net opening will be measured for payment purpose excluding chowkat.

S&F Aluminium Chequered grills of 100mmX100mm or 80mmX80mm of 8 mm dia bar fixed to frame with 20mmX2mm aluminium flat section complete all as specified and directed by Engineer-in-Charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners not paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid WPC moulded door shutter of 35mm size comprising of virgin polymer of K value 58-60(Suspension Grade), 2, 4, or 6 raised panel design calcium carbonate and naturalfibers (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screwwithdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus ofelasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

S&F SS 150mm , barrel tower bolts extruded section.complete all as specified and directed by Engr-In-Charge.

S&F for Butt hinges of stainless steel 100mm size, Heavy grade, complete all as specified and directed by Engr-In-Charge.

S&F for Brass Mortice lock, vertical type, size 100mm 4 levers vertical complete all as specified and as directed by the Engineer-in-Charge

S&F ISI marked magic eye complete all as specified and directed by Engr-In-Charge.

S&F in repair for door closer hydraulically regulated aluminum (dia cast) body, designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg, fixed as in repairs, complete all as specified and directed.

M&L brick work with old size brick, sub class B brick straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 all as specified.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces (Cement plaster 1:6) finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge

S&F in repair vertical venetian rolling blinds made out of nylon cloth of any colour as approved including hanging arrangement rollers etc complete all as specified and directed by Engr-in-Charge.

Taking down carefully copper/aluminium point wiring light ,fan, light fittings,socket or power complete, such as switches, ceiling roses, pendents, regulators, sockets etc.removing materials to store for keeping in safe costudy or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc. complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring for one light point controlled by one SP switch with single core PVC insulated unsheathed 1100 volt grade cable with multi strand copper conductor of size 1.5 Sq mm FRLS (Nominal area) drawn through and including non metallic rigid PVC concealed conduit, medium grade, ISI marked not less than 20mm dia, concealed in wall, ceiling with GI saddles GI screws, rawl plugs (concealed conduit wiring) with all fittings including Tee, Junction boxes including pressed steel terminal box powder coated of suitable size for mounting switch sockets and regulators and drawing continuous earth wire of PVC insulated unsheathed 1100 Volts grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) complete all as specified and directed Note: Cost for cutting, chasing and making good to existing surfaces are deemed to be included in the quoted Rate.

All as per item No 27 here in before but for one fan/exhaust fan and wall mounted fan point controlled by one SP switch.

All as per item No 27 here in before but For one bell point controlled by one No bell push

All as per item No 27 here in before but for one 3 pin socket out let, 6 Amps on same board with the cable 1.5 Sqmm size.

All as per item No 27 here in before but for one 3 pin socket out let, 6 Amps on Independent board with the cable 1.5 Sqmm size.

All as per item No 27 here in before but with 2.5 Sq mm cable for Independent bd one 3 pin 15 Amps socket outlet including S/C 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 V grade IS -694 FR LS cable for continuous earth wire connected to gang box of required size all as specified and directed by Engineer-in-Charge.

S&F switch piano 5 amps flush type single pole one way suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

S&F socket outlet flush type 5 pin 6 amps suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

S&F switch piano 16 amps flush type single pole one way suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

S&F socket outlet 2 in 1, 5 pin 16 amps flush type suitable for 240 volt AC complete all as specified and directed by Engineer-in-Charge.

Supply and fix bell push flush type 5 Amps suitable for 240 volt complete all as specified and directed by Engineer-in-Charge.

Supply and fix bell AC 240 volt ding dong type complete all as specified and directed by Engineer-in-Charge.

Supply and fix electronic Fan Regulator rotary flush step type 120 watt, 240 volt complete all as specified and directed by Engineer-in-Charge.

Taking down including disconnecting the electric connection of ceiling fan and dismantling blades greasing complete all as specified and directed.

Hanging / fixing only ceiling fan received from item No 40 above and connecting up including fastner and provision of suitable size of copper cable from connector of fans to ceiling rose complete all as specified and directed

M & L for in replacement submain wiring with two run of 6.0 sqmm single core PVC insulated but unsheathed FRLS cable of specified size of multistranded copper conductor 1100 volts grade IS:694 marked and one run of 6.0 sqmm PVC insulated but unsheathed FRLS cable for earth continuty conductordrawn through and under suitable size of rigid non metallic PVC conduit , medium grade, ISI marked ( not less than 20 mm dia) complete with all acessories and fittings ,concealed in wall and surface conduit on ceiling portion only complete all as specified (Note:- 2 Runs of 6.0 Sqmm, one run of 6.0 sqmm and one run of PVC conduit will be considered as one unit for measurement purpose) .

All as per item No 42 here in before but size of wire 4.0 sqmm

Supply and fixing in replacement of factory fabricated sheet steel enclosure, phosphatised, power painted, single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 20 amp, 240 volts, 10KA complete all as specified and directed by engineer-in-charge.

Supply and fixing in replacement MCB distribution board with Bus bar 200A neutral link , earth bar made out of CRCA mild steel sheet surface mounting SPN 12 way 230 volts double door type regal gray horizontal type complete all as specified and as directed by Engineer-in-Charge. Note :- MCB shall be measured and paid seperately.

S&F MCB SP 6 to 32 Amps 10 KA, 240 volt 'C' Series all as specified and directed by engineer-in-charge.

S&F MCB SPN 40 Amps 10 KA, 240 volt 50 HZ 'C' Series all as specified and directed by engineer-in-charge.

Supply and fixing in replacement of LED ceiling light 36 Watt 2x2 recess LED, 6000 K luminare having glare free symmetrical illumination complete all as specified and directed by Engr-in-Charge.

shakti construction (BID ID -3371527)

M/S MG GROUP (BID ID -3369718)