Re-wiring of Lighthouse ( LH) Tower, Power House, Staff Quarters, Supply and Installation of Street Lights Poles in Staff Quarters Compound and LH Compound and Electrical/Electronic Gadgets for IQ at Surathkal LH and DGPS under Goa Directorate.

Amount

Re-wiring of Lighthouse Tower - ANNEXURE – I

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

3 x 1.5 sq. Mm ( light points in service room and tower bottom Including stair case lights)

3 x 2.5 sq. mm(From DB to switch board and tower bottom switch board to service room switch board)

4 x 1.5 sq. mm(for staricase wiring From LH tower bottom to service room)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

2 way 5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

1 or 2 Module (75mmX75mm) (PVC) (for Wall mounted fan)

3 Module (100mm * 75mm) (PVC)

12 Module (200mm * 150mm) (PVC)

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation, testing and commissioning of ceiling fan/wall mounting fan including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supplying and fixing PVC batten / angle holder including connections etc. as required. (1 for lantern room)

Switch Gear and DB

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole 6A(2 Nos for LH bottom)

Single pole 16A (LH bottom)

Supplying and fixing following rating, double pole, 240 V, isolator in the commissioning etc. as required. existing MCB DB complete with connections, testing and and commissioning etc. as required. (at service room and LH bottom)

40 A ( for LH bottom stair case)

Supplying and fixing following rating, double pole, (single phase and neutral), 240V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. (at service room and LH bottom)

40 A (for LH bottom stair case)

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required.

8 way, Double door ( for LH bottom)

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. Lighthouse Tower

Supply of Indoor Industrial Tube Light Battens, with LED Tube (inclusive), LED Batten with Essential 4' 22W LED tube. (refer Sl No.1.035 for installation)

Supply of 10W LED Bulk Head Luminaries IP65/66/67 LED Light source (inclusive) with integrated LED source. (9 at stair case and one enterance of tower) (refer Sl No.1.035 for installation)

Supply of LED LAMP 12W(Base B22 12-Watt LED Bulb)dimmable Master LED Glass Bulb

Supply of Wall Mounting Fan, 400 millimeter Bracket mounted fan for Wall mounting (Mist Air Duos) Hi-Speed (Fixing at Bottom of Lighthouse tower) (refer Sl No.1.036 for installation)

Supply of 32X16mm U-PVC mini trucking system each 2 mtr length (for stiar case light wiring including vertical and horizontal fixing of trunking)

Supply and laying of 3core X 2.5 Sqmm Copper armoured PVC insulated/PVC sheathed XLPE power cable as required. (from Power house to Lighthouse bottom of 8 Way DB)

Labour charge for laying3core X 2.5 Sqmm Copper armoured PVC insulated/PVC sheathed XLPE power cable as required. (from Power house to Lighthouse bottom of 8 Way DB in existing trunch

Supply of Bare Copper wire, 8 SWG

Labour charge for laying 8 SWG wire from ground level to Distribution box at bottom of lighthouse tower

Miscellaneous items for the purchase of S.S screws and washer(for fixing cable duct), drill bits, fishers(heavy wall plugs) 250mm cable ties, SS 'U' Clamps, flexible pipes, etc.,

Re-wiring of Staff Quarters(AE, NA-I, NA-II, Twin quarters, Pump House) Power House, office and coil hut at Suratkal Lighthouse and DGPS Station -ANNEXURE – II

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

1 or 2 Module (75mm * 75mm)

3 Module (100mm * 75mm)

6 Module (125mm * 125mm)

8 Module (125mm * 125mm)

12 Module (200mmX150mm)

Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Bell push

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Supplying and fixing PVC batten/ angle holder including connections etc. as required. (fancy type)

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

CONDUIT AND CABLE

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. conduit as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

2 x 1.5 sq. mm(for Lamp Holder)

3 x 1.5 sq. mm

3 x 2.5 sq. mm

3 x 4 sq. mm

2 x 6 sq. mm from meter board to DB for all Qrs

2 x 6 sq. mm from LT DB to DB at power house

SWITCH GEAR

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted\ including earthing etc. as required. (But without MCB/RCCB/Isolator)

12 way, Double door

16 way, Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole 10A

Single pole 16A

Supplying and fixing following rating, double pole, 240 V, isolator in the commissioning etc. as required. existing MCB DB complete with connections, testing and Commissioning etc. as required.

Supplying and fixing following rating, double pole, (single phase and neutral), 240V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A, “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal / coke and salt as required.(for LH power house Genset body & neutral earthing) in beach area.

Providing and fixing 25 mm X 3 mm copper strip on surface or in recess for connections etc. as required. (For Genset Body & Neutral Earthing) from earth pit to Generator inside of the power house.

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.(AE, NA-I, NA-II, Twin qrs, Pump house, NA-II Qrs (LH campus), IQ and Power house

GI PIPES FOR ROAD CROSSING

Providing, laying and fixing 80mm dia G.I. pipe (medium class) in ground complete including trenching (75 cm deep)and re-filling etc as required (for CC road crossing)

Supply of Indoor Industrial Tube Light Battens, with LED Tube (inclusive), LED Batten with Essential 4' 22W LED tube. (refer Sl No.3.011 for installation)

Supply of Bulk Head Luminaries IP65/66/67 IK09/10 LED Light source (inclusive) with integrated LED source.

Supply of LED LAMP 12W(Base B22 12-Watt LED Bulb)dimmable Master LED Glass Bulb

Supply of Wall Mounting Luminaries, 7W Full Glass LED lamp B22/E27 (Non Dimmable) (refer Sl No.3.011 for installation)

Supply of Ceiling Fan, Electro-phoretic lacquered/ Electroplated surface for anti-rusting, High speed fan with wider tip blade for effective air circulation with Sweep 1200mm and Hight performance even at low voltage. (refer Sl No.2.036 for installation)

Supply of Outdoor 25Watt LED COB street light fitting (Die cast powder coated enclosure with structured LED arrays and IP65/66 protection)

Providing and fixing of street light bend pipe 1"(inch) GI class "C" pipe including clamp/SS screws etc.,

Supply of Bare Copper wire, 8 SWG earth wire (for all quarters @ 2.5Kg per earth

Labour charge for laying 8 SWG wire from ground level to Distribution box through pvc pipe with clamp.

Supply and Fixing of PVC Energy meter box with necessary holes.(sutiable for existing energy meter with kitkat 32 A fuse and neutral link) for AE Qrs, NA-I, NA-II, Twin Qrs, Pump house, NA-II(At Lighthouse Campus) quarters

Supply and Fixing kitkat 32 A fuse and neutral link. On top of the EB Pole

Supply and laying of 2 core X 6 sqmm Copper armoured PVC insulated/PVC sheathed XLPE power UG cable as required.( Laying from EB pole to quarter's meter box in under ground for 7 services)

Supply and laying of 4 core X 25 sqmm Copper armoured PVC insulated/PVC sheathed XLPE power UG cable as required. ( Double run, one for static sensor and another one for Light load from transformer to power house 50 mtrs+ 50 mtrs)

Supply and laying of 3 core X 2.5 sqmm Copper armoured PVC insulated/PVC sheathed XLPE power UG cable as required. (Power house to coil hut)

Supply and laying of 2 core X 10 sqmm Copper armoured PVC insulated/PVC sheathed XLPE power UG cable as required. (Power house to IQ)

Making cable trench for laying cable direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. staff quarters, and Power house service cable)

Supply and Installation of 100A Triple Pole Neutral Link with HBC Cum Rewireable Porcelein Fuse Unit for Static sensor and LH Load connecting between 3 phase meter board and LT wall mounted type distribution board.

Labour charge for Dismantling of old wiring, fans, cables, switch board and electrical fittings etc., at NA Qtrs 3 No, LHA qtrs 2 Nos, IQ and power house and dismantling of Old panel Board etc., handed over to Station incharge.

Miscellaneous items for the purchase of screws, Bolts, Nuts & Washers, drill bits, cable ties, 25mm PVC bends, tees, 1,2,3,4 way junction boxes,Cutting plates, 12 mm Fan hooks, Fan rod for extension, wire strippers, steel spring, pvc junctions boxes, SS Clamp etc., Wall white putty and paints.(for Na qtrs 3 Nos, IQ - 1 No,LHA qtrs - 2 Nos, PH - 1No)

Making earth pit charges(additional) refer Sl No.4.022 (for earthing) Lighthouse located beach area diffcult to digging earth pit(take out water and labour charges) beach side (for plate earthing)

Supply and fixing 11/2" PVC HDPE flexible(Hard) pipe Thickness aprox 3mm hard pipe I Rock/stone (for laying 25X3mm copper strip from earth pit to power house)

Making earth pit charges(additional) of Sl No.4.024 for Lighthouse located at hill & rocky area diffcult to digging earth pit(take out water and labour charges)

Red stone cutting charges for concealed wiring and making hole 600 mm wall for cable entry As buildings are constructed by red stone

Applying wall white putty and painting in wherever plastering work done in all quarters.

Supply of 25 Sqmm, 4 core Pvc Ins Copper Flexible Cable (for internal loop wiring in power house)

Supply and installtion of Street Light poles with LED fitting for staff quarters compound and lighthouse compound -ANNEXURE – III

Electrical Fittings /Cables/

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Double pole (6A)

Providing, laying and fixing 80mm dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required (for CC road crossing)

Supply of Outdoor 25Watt SMD LED Chip as per LM 80/IS16106 (LED PT Module 0.5 to 1 Watt) top Die cast Aluminium and Bottom Die Cast Aluminium with higher thermal conductivity IP66 protection of 70mm pipe entry

Supply of Outdoor IP65 Wall Mounting Gate Light Luminaries, 20W LED with Big doom

Supply and laying of 3core X 2.5sqmm Copper armoured PVC insulated/PVC sheathed XLPE power cable as required.( 120 mtrs for staff quarters compound and 100 mtrs for Lighthouse compound)

Supply of 2.5 Sqmm Cable gland

Supply and Installation 3" Dia Class "C" GI pipe 4 meter Length (as per drawing) alongwith applying 1 coat primer and 2 coat aluminium paint.

Supply and Installation of 2" threaded "C" Class pipe of 1.5 feet length alongwith applying 1 coat primer and 2 coat aluminium paint.

Supply and Installation of 3" to 2" GI reducer alongwith applying 1 coat primer and 2 coat aluminium paint.

Supply and fixing of SMC Pole mounted Junction Box (200X140X95mm)with side hinged door, IP55 with necessary clamps/ Strip, SS screws/Nut and blot, etc., (11 nos for street light and 2 nos for gate light)

Supplying and laying of 3 Core 1.5 Sqmm PVC Copper cable (from street light fitting to jn box)

Supply and fixing 11/2" PVC HDPE flexible(Hard) pipe Thickness aprox 3mm hard pipe (To fixing foundation for laying cable from under ground to junction box)

Supply of 1 Phase street light timer

Supply of PVC enclosure for fixing street light timer

Making cable trench for laying cable direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. (street light cable, IQ Cable and pump house cable)

Electrician (Labour) Charges for wiring of streelights, and fitting luminaries, timer, etc.,

Foundation and base work for Streetlights

Base of Streetlights: Earthwork Excavation in beach area(staff Qtrs compound) and take out water during excavation (0.6 x 0.6 x 0.5m) for the foundation of steeetlight, 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Concrete Work (0.6 x 0.6 x 0.5m) for the foundation with Post pipe placed in concrete inclusive of materials, Brick Work (0.45 x 0.45 x 0.45m) for post base and placing of pipes for cable entry, Plastering Work (4 x 0.45 x 0.45) +(0.45 x 0.45) for post base and Painting Work applying 1 coat White primer Paint and 2 coat Synthtic enamel Red Paint.(4 x 0.45 x 0.45)+(0.45x 0.45)

Labour charge for dismentaling of old street lights

Miscellaneous items for the purchase of SS bolt and nut etc.,

Classic Electricals

SRS ELECTRICALS

Power Care Electrical

Linsta Services

TELECON SYSTEMS