Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.3 LAccepted-AOC DADRA AND NAGER HAVELI DN | DADRA AND NAGAR HAVELI | THE DADRA AND NAGAR HAVELI AND DAMAN AND DIU | 396193 | L1 | Accepted-AOC L1 | |
| 2 | L2₹47.6 L+₹3.3 L (7.42%)Rejected-AOC 475 OPP DAMAN GANGA COLONY GAYTRI MANDIR ROAD AMLI SILVASSA 396230 U T OF D NH | DADRA AND NAGAR HAVELI | THE DADRA AND NAGAR HAVELI AND DAMAN AND DIU | 396230 | L2 | Rejected-AOC L2 |
Tender Value
₹46.8 L
EMD Value
₹94,000
Closing Date
22 Jan 2024, 12:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer,PWD,WD-I,(R and B),DNH,Silvassa
PWD Campus Block No.I(Bldg), DNH, Silvassa
Furnishing to New Police Station Building at Silvassa.
2024_UTDNH_6910_1
E-TENDER NOTICE NO. 47 OF 2023-24 (BLDG)
Open Tender
Civil Works - Buildings
Item Rate
90 days
UT OF DNH
As per NIT refer
3 documents required · 3 mandatory
₹1,000
Executive Engineer,PWD,WD-I,(R and B),DNH,Silvassa
₹94,000
24 Jan 2024
15 Jan 2024
22 Jan 2024
15 Jan 2024
22 Jan 2024
15 Jan 2024
Amount
Visitor chair 3 seater - VIA PERFORATED METAL 3 Str on Beam with Arms, with Perfo Metal St/Bk 1)SEAT/BACK FRAME ASSEMBLY: The seat and back should be made of 0.12 ±0.0096 cm thick CR steel perforated sheets which should be welded to a seat/back frame assembly made of of 0 1.9 ±0.02cm x 0.16 ±0.0128 cm thk MS ERW tube. Connecting Strips made of 0.5 ± 0.05 cm thk HR steel should be welded to the structure for assembly with the connecting beam. The assembly should be powder coated ( DFT 40-60 microns }. SEAT SIZE: 39.0cm. (W) X 41.5cm. (D) (Approx.) BACK SIZE: 39.0cm. (W) X 21.5cm. (H) (Approx.) 2)ARMREST: It should be made up of oblong tube of size 0.35 ±0.024 cm x 0.15 ±0.015 cm x 0.16 ±0.015 cm Thk. & 0 0.15 ±0.02 cm bright bar welded to seat & back frame assembly. 3)CONNECTING BEAM ASSEMBLY: It should be a U-shaped fabricated assembly made of 0 3.81±0.03 cm. x 0.2 ±0.016 cm thk MS ERW twin tubes. The connecting tubes should be welded together with MS base plates made of 0.25 ±0.025 cm thick CR. Steel and mounting plate made of 0.5 ± 0.05 cm thk HR Steel. Threaded inserts should be provided on both ends of each connecting tube for fixing leg assembly on each side. The connecting beam assembly should be powder coated ( DFT 40-60 microns }. 4)LEG ASSEMBLY: It should be a 2-piece fabricated to form a box section made of 0.16 ±0.0128 cm thk. CR steel. Threaded nuts should be welded to the box section for fixing adjustable glide screws. The leg assembly should be powder coated ( DFT 40-60 microns ). 5)ADJUSTABLE GLIDE: The adjustable glide should be injection moulded in black Nylon 6 and should be used for level adjustment of the beam seating on uneven floor surface. It should be fitted to the leg assembly. Overall Dimensions of Chair Seat Height - 46.0 cm. Height - 80.0 cm. Width & Depth of Chair as - Width-152cm and Depth-46.0 cm, total width- 168.0, total depth- 57.0 cm.
TABLE FOR I.O -Entpr 1500 with CPU hanger Enterprise 1500 Table with CPU Hanger size shall be 1500 Width mm x 750 Depth mm x 728 Height mm . Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish powder coat (epoxy polyster) .
CHAIR FOR STAFF and CCTNS OPERATOR- BRAVO MB SEAT/BACK ASSEMBLY: The seat and back should be made up of 1.2 ±0.1cm. thick hot-pressed plywood and upholstered with .fabric upholstery covers and moulded Polyurethane foam. The back foam should be designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area BACK SIZE 47.5 cm. (W) x58.0 cm (H) SEAT SIZE 47.0 cm. (W) x 48.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density = 45±2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. ARMRESTS :The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. CENTER TILT SYNCHRO mechanism: The mechanism should be designed with the following features: • 360° revolving type. • Upright-position locking • Tilt tension adjustment • Seat/back tilting ratio of 1:3. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 12.0 ±0.3cm. TELESCOPIC BELLOW ASSEMBLYThe bellow should be 3 piece telescopic type and injection moulded in black Polypropylene. PEDESTAL ASSEMBLY:The pedestal should be injection moulded in black 33% glass-filled Nylon-66 and fitted with 5 nos. twin wheel castors. The pedestal should be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). TWIN WHEEL CASTORS:The twin wheel castors should be injection moulded in Black Nylon. Overall Dimensions of Chair Seat Height - min 42.5 to max 54.5cm. Height - min85.5 to max 97.5cm. Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm.
CUPBOARD STORWEL PLAIN Storwel plain shall have an overall size of 916mm(W)x486mm(D)x1981mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The Storwel Plain should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available.
TABLE EXECUTIVE - Entpr 1650 with CPU hanger Enterprise 1650 Table with CPU Hanger size shall be 1650 Width x 9000 Depth x 728 Height mm . Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish powder coat (epoxy polyster) .
TABLE - Entpr 1200 without CPU hanger Enterprise 1200 Table without CPU Hanger size shall be 1200 Width mm x 600 Depth mm x 728 Height mm. Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish powder coat (epoxy polyster) .
TABLE - MINGLE UNITIZED PLT_8 Seater ST 2350 X 1150 X 740 Work top-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access panels provided with soft closing hinges. Understructure-The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Anodised aluminium alloy 63400 - WP profile is added at bottom edges for improving the aesthetics. The product has a knock-down construction. Wire Management-Bottom cabinet with door is provided for flow of wires and cables. Cutout provision below Access flap at four locations for standard 8 module Anchor Roma is provided. Beside each cutout, an additional cutout with plate is provided for mounting Audio Visual Cables (eg. HDMI,VGA-A,etc).
L SHAPE TABLE - ASCENT DESK WITH ERU LHS Ascent Desk With ERU LHS size shall be 2100 Width mm x 1600 Depth mm x 765 Height mm .The main top shall be of Particle board (Melamine Finish) 1800 x 795 mm.The top shall be 25 mm thick plus 15 mm frame and 2 mm PVC lipping on top .Also there shall be 0.35 mm PVC lipping on frame.The Modesty panel shall be 1100 x 405 x 46 mm thick particle board (Melamine Finish) with 0.35 mm thick PVC lipping.The Drawer Front shall be of size 500 x 170 x 16 mm thick Particle board (Melamine Finish) with 0.35 mm thick PVC lipping.The KBPT shall be 578 W x 284 D x 16 mm with 0.35 mm Thick PVC lipping.The ERU shall have all panels of 16 mm thick Particle board (Melamine Finish).
COMPUTER TABLE - UPBEAT 1200X600 Providing and placing UPBEAT DESK based modular workstation with System ht - 1200 mm SCREENS: Main Fabric screen on stud. UNDERSTRUCTURE: Comprising of metal cross member between legs, DFINE PLUS legs made up of metal finish on end and shared leg with wire tray raiser the entire assemply is fixed to the worktop. Wire Management : Shared leg with wire tray raiser is given to pull wires from the floor junction box upto the power box fixed under neath the worktop. Aluminium access flaps on worktop above power box cut out for accessing switches. To carry wires forward through w/s wire tray assembly is provided below worktops. MODESTY PANEL: Porforated metal modesty 0.8 mm thk.modesty is mounted under neath the worktop with the help of the brackets. Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1200 mm w X 600 mm d. Pedestals - Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. Note: All partitions and side panels have levelling screws for adjustment in case of Uneven floor to take care of +/- 40 mm of uneven flooring.
CHAIR STARR - Mid Back 1) SEAT/BACK ASSEMBLY: The seat and back should be made up of 1.2 ±0.1cm. thick hot pressed plywood. OCP-QLTA-P14.18 and upholstered with fabric and moulded Polyurethane foam with PVC lipping all around. The back foam should be designed with contoured lumbar support for extra comfort BACK SIZE: 41.0cm. (W) X 46.0cm. (H) SEAT SIZE: 43.0cm. (W) X 41.0cm. (D) 2) HIGH RESILIENCE (HR) POLYURETHANE FOAM : The HR Polyurethane foam should be moulded with density = 45 ±2 kgs. /m3 and Hardness load 16 ± 2 kgf for 25% compression 3)ARMRESTS : The armrest should be .made of black integral skin polyurethane with 50-70 Shore A hardness and reinforced with MS insert. The P.U. armrest should be fixed to black powder coated DFT 40-60 microns ) armrest bracket made of 0.5 ± 0.05cm. thk. HR steel 4) PERMANENT CONTACT mechanism: The permanent contact mechanism should be designed with the following features:- 360° revolving type 14° ±2° maximum back-tilt only. Upright position locking Tilt tension adjustment 4) PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 12.0 ±0.3cm 5) TELESCOPIC BELLOW ASSEMBLY: The bellow should be 3 piece telescopic type and injection moulded in black Polypropylene 6) PEDESTAL ASSEMBLY: The pedestal should be fabricated from 0.2 ± 0.02 cm thick HR sheet (should be :DD 10791 HR) , powder coated ( DFT 40-60 microns ) and fitted with an injection moulded black Polypropylene hub cap and 5 nos. twin wheel castors. The pedestal should be 55.0 ±0.5cm. pitch-center dia. (65.0 ±1.0cm with castors) 7) TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in Black Nylon. Overall Dimensions of Chair Seat Height - min 43.4 to max 55.4cm. Height - min87.9 to max 99.9cm. Width & Depth of Chair as measured from pedestal - Width-65.0 cm and Depth-65.0 cm.
VISITOR CHAIR - MULTIPURPOSE - Cushioned Chair 4 Legged W/o Armrest 1)SEAT/BACK ASSEMBLY: The seat and back should be made from 1.0±0.1cm. thk. hot pressed moshould be ture resistant tant.commercial plywood and upholstered with P.U. foam and fabric. BACK SIZE: 42.0cm. (W) X 26.5cm. (H) SEAT SIZE: 42.0cm. (W) X 42.0cm. (D) 2)HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR Polyurethane foam should be moulded with density =45+1-2 kg/m3 and Hardness load 16 ± 2 kgf for 25% compression. 3)UNDERSTRUCTURE ASSEMBLY: The understructure assembly should be a cantilever type mainframe made of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. E.R.W. tube and black powder coated--( DFT 40-60 microns ) Overall Dimensions of Chair Seat Height - 45.5 cm. Height - 78.5cm. Width & Depth of Chair as measured from base - Width-52.0cm and Depth-60.5 cm.
OFFICER CHAIR- BRAVO HB SEAT/BACK ASSEMBLY: The seat and back should be made up of 1.2 ±0.1cm. thick hot-pressed plywood and upholstered with .fabric upholstery covers and moulded Polyurethane foam. The back foam should be designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. BACK SIZE 47.5 cm. (W) x 69.5 cm (H) SEAT SIZE 47.0 cm. (W) x 48.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density = 45±2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. ARMRESTS :The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. CENTER TILT SYNCHRO mechanism: The mechanism should be designed with the following features: • 360° revolving type. • Upright-position locking • Tilt tension adjustment • Seat/back tilting ratio of 1:3. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 12.0 ±0.3cm. TELESCOPIC BELLOW ASSEMBLYThe bellow should be 3 piece telescopic type and injection moulded in black Polypropylene. PEDESTAL ASSEMBLY:The pedestal should be injection moulded in black 33% glass-filled Nylon-66 and fitted with 5 nos. twin wheel castors. The pedestal should be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). TWIN WHEEL CASTORS:The twin wheel castors should be injection moulded in Black Nylon. Overall Dimensions of Chair Seat Height - min 42.5 to max 54.5cm. Height - min97.0 to max 109.0cm. Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm.
PLASTIC CHAIR- UNWIND MS The Seat and Back should be made up of injection moulded indoor grade PolyPropylene compound SEAT SIZE : 52.5 cm. (W) x 53.2 cm. (D) BACK SIZE : 51.6 cm. (W) x 40.5 cm. (H) The powder coated ( DFT 50±10 microns ) welded tubular frame should be made from 0 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.16 ± 0.0128 cm MSERW tube. The shoes should be made of indoor grade PolyPropylene compound and snap fitted with tubular frame. Overall Dimensions of Chair Seat Height - 45.0 cm. Height - 84.5cm. Width-52.5 cm and Depth-55.8 cm.
SINGLE BED - EQ bed with metal sheet with headboard Overall Size:Width - 2050.0 mm Depth - 973.0 mm Height - 720.0 mm Material:Headboard panels are made of 18 mm thick Prelaminated Particle Board. All the exposed edges are edge banded with 2 mm thick PVC edge banding.Bed leg frame structure consist of metal frames made of M.S. 50 x 25 mm box section in 1.2 thickness Internal Pipes made of 19 x 19 mm box section in 0.9 mm thickness. Headboard pipes are made of 25 x 25 mm box section in 0.9 mm thickness. Mattress holding bkt is made of 0.6 mm CRCA SHEET Mattress frame sheetmetal top is made of 1 mm CRCA SHEET. Hardware:The high quality hardware used. Construction:Knock Down construction.Packets: 1 packet. Finish:18 mm thick Prelaminated Particle Board is in 4501, make — GODREJ (SHIRVAL).Bed leg frame structure are powder coated in shade : MATT TAUPE WHITE. REF NO. 9001904 to thickness of 50 microns (+-10). Mattress frame structure are powder coated in shade : EPP FR TEX. MILKY WHITE 20K, REF NO. 9003456 to thickness of 50 microns (+-10). Rest all metals are powder coated in shade : S/G CHARBROWN. REF NO. 9000605 to thickness of 50 microns (+-10).
WARDROBE - Str Model- 2 Prince Grey Product Size:916mm(W) x 486mm(D) x 1980mm(H).Construction & Material:Welded construction. 0.7mm thk CRCA for shelf. 0.8mm thk CRCA for back & locker shelf .0.8mm thk HSCR for doors .0.9mm thk CRCA for all other components .Locking & handle, Mazak handle , Three way locking mechanism with shooting bolt .Locker:Fixed full locker with secret compartment.Hinged Door:2 way locking mechanism for locker door .Shelving: Height wise adjustable shelf mounting .2Nos. of adjustable full Shelf .Hanging Rod & Tie bar:1.0mm thk ERW tube for hanging rod . 1.0mm thk aluminum for tie bar .Leveler:M10 screw type leveler with hex plastic base .Finish:Epoxy Powder coated to the thickness of 50 microns (+-10).
SOFA - PISA 2 STR 1)SEAT FOAM : The seat is made up of PU foam in Density 28 ±2 kg/cu.mtr with an additional top layer of supersoft PU foam in Density 32 ± 2 kg/cu, upholstered with fabric or leatherette. 2)BACK FOAM : The back is made up of PU foam in Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. 3)UNDERSTRUCTRE : Understructure is made up of 1.2±0.1 cm. thick hot pressed plywood [moisture resistance & termite proof as per IS:303] & pinewood of cross sections devoid of major knots & surface defects. 6 nos. per seat & 3.8mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. 4)LEG ASSEMBLY : It is a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. Width (W): 146.0 CM. Depth (D): 90.5 CM. Height (H): 85.5 CM. Seat Height (SH): 45.0 CM.
SOFA - PISA 1 STR 1)SEAT FOAM : The seat is made up of PU foam in Density 28 ±2 kg/cu.mtr with an additional top layer of supersoft PU foam in Density 32 ± 2 kg/cu, upholstered with fabric or leatherette. 2)BACK FOAM : The back is made up of PU foam in Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. 3)UNDERSTRUCTRE : Understructure is made up of 1.2±0.1 cm. thick hot pressed plywood [moisture resistance & termite proof as per IS:303] & pinewood of cross sections devoid of major knots & surface defects. 6 nos. per seat & 3.8mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. 4)LEG ASSEMBLY : It is a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. Width (W): 86.0 CM. Depth (D): 90.5 CM. Height (H): 85.5 CM. Seat Height (SH): 45.0 CM.
TEAPOY - PISA CENTER TABLE 1)PISA SIDE TABLE & CENTER TABLE GLASS: It is 10 ±0.3 mm thick black tinted Toughened glass UV glued with bushes made in SS 202 grade for focing with understructure. 2)PISA SIDE & CENTER TABLE UNDERSTRUCTURE: It is a welded Assembly made in SS202 grade Dia. 12±0.04 as per IS:1762. Width of table= 112.0 cm, Depth=60.0 cm, height=34.9 cm.
PODIUM Providing and supplying Podium Lecturer Table 25mm thkpre-laminated board (PLB) with storage. As approved by Architect. (Includingtransportation,loading,unloadinganderecting/installation/placing of item at site asdirected by Engineer in charge.) Size: 900mm x 950mm x 750mm
LOCKER Providing and supplying 20 ltr Key lock locker. Weight is 10.5 kg and size of locker is 25H x 35W x 32D cm. Colour is ivory
RACK Providing and supplying Slotted Angle Rack of size 900mm x 300 mm x1850 mm and thickness which should support angles and should be provided in options of hot dip, plain and painted finish for long time usage. Further,it should be galvanized/powder coated finish which can provide for optimum corrosion resistance.It should be steady enough to keep bulky stuff easily upto 40kg per shelf capacity. It should include shelves with an adjustable arrangement,should have greater depth support,and should be completely flexible to use,and also allow easier assembling using nuts and bolts, and should have choice of different thicknesses, robust construction standards that allow handling maximum storage, heavyduty structural steel section, and others. Offered angle racks should be designed utilizing the finest quality of material and sophisticated technology in compliance with set standards of the industry. As approved by Architect. (Including transportation, loading, unloading and erecting/installation/placing of item at site as directed by Engineer in charge.) Size: 900mm x 300mm x 1850mm
RACK SMALL Providing and supplying Slotted Angle Rack of size 900mm x 300 mm x1200 mm and thickness which should support angles and should be provided in options of hot dip, plain and painted finish for long time usage. Further,it should be galvanized/powder coated finish which can provide for optimum corrosion resistance.It should be steady enough to keep bulky stuff easily upto 40kg per shelf capacity. It should include shelves with an adjustable arrangement,should have greater depth support,and should be completely flexible to use,and also allow easier assembling using nuts and bolts, and should have choice of different thicknesses, robust construction standards that allow handling maximum storage, heavyduty structural steel section, and others. Offered angle racks should be designed utilizing the finest quality of material and sophisticated technology in compliance with set standards of the industry. As approved by Architect. (Including transportation, loading, unloading and erecting/installation/placing of item at site as directed by Engineer in charge.) Size: 900mm x 300mm x 1850mm
Providing and fixing for Curtain with fabric of (Rs.150/- Rs.200 / Mtr.), stitching, belt & Eyelet rings
Providing and fixing for S.S. Pipe 25mm dia meter with S.S. socket S.S. support & fitting etc. complete
Providing and erecting water cooler having storage capacity 80Ltr. & cooling capacity 40 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the water should drop by 15˚ C within a hour, The water cooler should be comprising of hermetically sealed compressor, fan motor, condensing unit, water tank surrounded by evaporating coil, thermostats, relay etc. complete with necessary inlet & outlet connection. The body of water cooler will be made from Stainless Steel. ◦
Providing and erecting approved make split air-conditioning unit consisting of copper condensing unit with fan motor, hermetically sealed rotary compressor with accessories etc. duly connected separately erected evaporating unit and blower motor with its accessories by means of extra supplied proper insulated copper tubing,drain PVC pipes suitable for ( cost includes powder coated Stand, Eco Friendly green gas charging, 15A plug top & Remote Control) with necessary core cutting.[a] For 1 Ton Capacity
Providing and erecting approved make split air-conditioning unit consisting of copper condensing unit with fan motor, hermetically sealed rotary compressor with accessories etc. duly connected separately erected evaporating unit and blower motor with its accessories by means of extra supplied proper insulated copper tubing,drain PVC pipes suitable for ( cost includes powder coated Stand, Eco Friendly green gas charging, 15A plug top & Remote Control) with necessary core cutting.(b) for 1.5 ton capacity
Kuvarji B Parmar
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .