WBPWD/SS/EE/BDN/ NIT_18/ 2025_2026 _SL_1

Dismantling carefully wooden walling, flooring of ceiling and stacking dismantled materials as directed.

Dismantling all types of plain cement concreteworks, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor including roof. (a) upto 150 mm. thick

Dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m. a) In ground floor including roof.

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.

Taking out Mirzapur or glazed porcelain tiles carefully by chiselling from walls or floor including stacking serviceable material as directed.

Spot application for insecticides using Aqua basespray for pest (for bugs, cockroaches, silverfish,spider, termites, mosquitoes) to walls and ceiling etc.with chemical emulsion by admixing chloropyrofosemulsifiable concentrates (1% concentration) withwater by weight including spraying the emulsifiedchemical @ 0.5 litres per sq.m. by a hand operatedpressure pump on wall surfaces, ceiling, electricalfixture,electrical lines including drilling holes inplaceswhere source of termite is detected squirtingchemical solution into the holes and sealing the holeswith cement grout. (Rate is per sq.m. of the floor areawhile actual work will be all walls ceiling, rack, partition and furniture).

Anti-termite treatment to the junction of wood work and masonry walls with chemical emulsion by admixing chloropyrofos emulsifiable concentrates

Anti-termite treatment to the soil under floor with chemical emulsion by admixing chloropyrofos emulsifiable concentrate

Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge

Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & refixing the same including mending good all damaes complete. (a) Upto area 2.5 Sq.m

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominal size) excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes.

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm .

(A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand.

Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

(I) Cement concrete with graded stone ballast (40 mm size excluding shuttering) (A) [Pakur Variety] (a) 1:3:6 proportion

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (b) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge.

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. In ground floor.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation and upto roof of ground floor/upto 4 m II. JSW/JSPL/SHYAM/ SRMB/BMASL/ELECROSTEEL/SSL In ground floor.

Brick work with 1st class bricks in cement mortar (1:6) In foundation & plinth

In super structure

125 mm. thick brick work with 1st class bricks in cement mortar (1:4) inground floor.

Extra for using approved H.B netting in every third layer in 16 & 17 of subhead A above in any floor

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (i) With 1:6 cement mortar (b) 20 mm thick plaster,In ground floor.

(c) 15 mm thick plaster,In ground floor

(ii) With 1:4 cement mortar (c) 10 mm thick plaster,In ground floor

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.

M.S.or W.I. Ornamental grill of approved design joints continuouslyweldedwithM.S, W.I. Flats and bars ofwindows,railingetc.fittedandfixedwithnecessaryscrewsandlugsingroundfloor. Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.

Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & sideframe), shutter (top, bottom, side & interlock member) made of aluminiumalloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodisedconforming to IS 1868-1983, fitted with all other accessories viz. PVCroller, EPDM gasket, maruti lock, screws etc. including labour chargesfor fitting & fixing of aluminium 2-track/3-track sliding window withfixing of glass (excluding cost of glass) all complete as per drawings and direction of Engineer-in-charge. 10-12 Micron thickness Annodizing film Natural white A) In 10-12 Micron thickness Annodizing film Natural white.

Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987.4mm thick coloured / tinted / smoke glass.

Supplying and laying true to line and level Double Charge Vitrified Tiles of approved brandconforming to IS 15622: 2006 (Group B I a) and tested as per IS 13630:2006 (relevant parts) [Non-modular sizes for tiles with Water Absorption (av.) ≤ 0.08 %] in floor, skirting etc. set in 20 mm thick sand cement mortar (1:4) bed prepared after application of slurry using 1.75Kg of cement per Sqm over the base and 2mm thick cement slurry using cement @2.91Kg./sqm at the back side of the tiles and laid over the mortar bed using 0.2 kg/sqm of White cement used for joint filling with approved pigment as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials,Iabour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (Note: This work should not be executed without specific permission of Superintending Engineer ln Ground FIoor:(size not Iess than 600mmX 600 mm X 9.5 mm thick)

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.(b) Area of each tile above 0.09 Sq.m. (i) Coloured decorative In Ground Floor.

Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous& Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance > 0.5, Mohr's hardness > 5.0, Staining resistance: Class-1, Water Absorption: E < 0.5%], MOR > 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar In Ground Floor: Sizes-600 mm x600mm x10 mm with breaking strength >1500 N

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (e) Sal : Malayasian: In ground Floor.

Glazed shutters of doors, as per design with sheet glass of 5.0mm thick beded in putty and fitted with teak bead and nails (the styles 150mm wide, top & bottm rail 200mm wide if not otherwise mentioned) including fitting and fixing shutters in position but excluding the cost of glass , putty , teak bead, nails, hinges etc. andother fittings, in ground floor 50mm Thick shutters 1st class best Indian teak.

Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid coreand internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in ground floor:35mm thick shutters (single leaf)

Supplying, Fitting & Fixing 30 mm thick Factory made moulded Door shutter,consisting of solid core single leaf flash door of 30 mm thickness lipped with 15mm [5mmx3] thick x 30 mm wide on one style and top rail and 10 mm [5mmx2]thick x 30 mm wide of the other style and bottom rail. The inner panel laminatedwith 2 mm thick termite proof water proof and fire resistant moulded PVC sheetwith raised panel designed in different plain/ or Prelam colour on one side after routing the moulded design on flash door and 2mm plain and or Prelam PVCsheet on other side using rubber adhesive on flash door and solvent cementadhesive on the PVC lipping etc. complete excluding hardwares as necessary asper direction of Engineer-in Charge, Manufacturer‟s Specification and drawing..In ground floor. Moulded door using 2 mm Prelam moulded PVC sheet on both side.

Providing and fixing, in position concealed G.I. section for wall paneling usingboard of required thickness fixed on the „W‟ profile (0.55 mm thick ) having aknurled web of 51.55 mm and two flanges of 26 mm each with lips of 10.55 mm,placed @ 610 mm C/C in perimeter channel having one flange of 20 mm andanother flange of 30 mm with thickness of 0.55 mm and web of length 27 mm.Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves @610 mm C/C with fully threaded self-tapping dry wall screws. Board is fixed to theW‟ profile with 25 mm countersunk ribbed head screws @ 200 mm C/C., allcomplete as per the drawing & directions of Engineer-in-Charge, the joints of theboards are finished with specially formulated jointing compound and 48 mm wide jointing tape to provide seamless finish. 6 mm thick Designer Multipurpose Cement board (High Pressure steam cured,tested as per AS-1530 part 3 & BS-476 Part 4,5,6,7&8, density > 1450kg/m3,Bond strength 15 N/sqmm fire resistant, termite proof, moisture resistant)reinforced with cellulose fibre manufactured through autoclaving process as perIS : 14862 & ISO 8336, with fibre cement screws in partition as per drawingsand direction of Engineer-in-Charge complete. (The above stated item can beused successfully to cover up efflorescence & damp affected walls to improve theaesthetic view).

Styles and rails of wooden shutters fitted and fixed complete. (ii) 35mm Thick shutter. (b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak.

Panel (made of single plank) of door and window shutters to design as directed: In Ground Floor (Payment to be made on area of exposed new work). (In case of non-supply of single plank penal rate of reduction to a maximum of 30% will be made). (ii) 19mm thick panel of 30cm to 45cm width (b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak.

Providing and fixing of factory made uPVC Louver window (White Colour) (U value=1.9-1.3 W/m 2 K, flame resistant, self extinguishing, lead free) comprising of uPVC multi-chambered with wall thickness of 2.3mm (±0.2 mm ) duly reinforced with 1.6 mm (±0.2 mm) thick G. I. Section made from roll forming process of required length (shape & size according to uPVC profile). Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. Both vertical sides of the frame, adjustable louver mechanism having one lever shall be fitted with the provision of 4 mm glass. Window frame will be fixed to the wall with 100mm long and 8mm dia for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Fasteners and after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size, of approved quality complete in all respect as per as per approved drawing & direction of Engineer-in-Charge. (Note: Profilemanufacturer & Window Manufacturer must be one & same, Onlymanufacturer Waranty is aceptable) Louver Window (Adjustable Louver Only) frame of size 67 x 62 mm both having wall thickness of 2.3 ± 0.2 mm

Supplying, fitting and fixing fibre reinforced polymer (FRP)Composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to safisfy IS: 4020 door testing performance criteria..(i) 66mm x 90mm,

Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite door shutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to satisfy IS:4020 door testing performance criteria. (i) 32 mm thick,

Supplying, fitting and fixing M.S. Clamp for fixing door and window frame made of flat bent bar, end bifucated, fixed in cement concrete with stone chips (4:2:1) fitted and fixed complete as per direction. 40 mm. x 6 mm., 200 mm. length

Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (vii) 100mm. X 58mm. X 1.90mm.

Supplying 'Godrej' mortice lock chromium plated with latch and keys 4 levers, including fitting and fixing complete.

Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: (ix) 300mm long x 10mm dia. bolt.

(iv) 150mm long x 10mm dia. bolt.

Anodised aluminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete. a) With continuous plate base hexagonal/round rod. (vi) 150 mm grip x 10 mm dia. Rod

Supplying ,fitting and fixing hinge cleat in position excluding the cost hinge and other fiffitngs b) with 75mm iron Butt-hinge ii) Sal : Malayasian

Supplying, fitting & fixing 125mm long wooden buffer block ii) Sal : Malayasian

Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filled with foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP) (b) 4mm thick (0.50mm Al.+3.0mm LDPE +0.50mm Al. PVDF coating)

Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing (b) Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. [The extra rate admissible for the openable portion only] (iii) Centre hung ventilators as per I.S. sizes 580 mm.

Providing and fixing of 15mm thick Mineral Fibre Acoustic Ceiling Tiles of approved pattern and size 595mm X 595mm should be placed in the Grid module to form a False Ceiling with NRC value ≥ 0.6 Material class: A2-s1, d0 as per EN 13501-1, Fire: REI – REI120 as per EN 13501-2, Surface Burning Characteristics: Class 1 or A as per ASTM E 84) withpowder coated exposed G.I. grid suspension system (interlocking T-Grid,having load carrying capacity with mid span deflection not exceeding1/360 span with hanger spacing of 1200mm c/c) consisting of MainRunner 3600 mm long, Cross Tee 1200 mm / 600 mm long and WallAngle. The Wall Angle shall be fixed on PVC Dash Fasteners on theperimeter of the wall by steel screws with distance 300mm c/c. The MainRunners to be placed @ 1200 mm. The Cross Tee 1200mm will beinserted in the pre-cut slots of Main Runner at a regular interval of 600mm to form a modular grid of 1200mm X 600mm. Additional Cross Teesof 600 mm shall be placed perpendicular to the Cross Tee 1200 mm longto finally form a grid of 600 mm X 600 mm. Grid of module size 600 mmX 600 mm shall be supported by 6 mm dia G.I. wire from purlins/ soffit.All complete as per the drawing &directions of Engineer-in-charge. In ground floor With15 mm thick mineral fibre false ceiling tile (NRC ≥ 0.6 as perASTM C 423 & Sound attenuation - 34dB as per EN ISO 10848

Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats i) Water based interior grade Acrylic Primer Gr floor Toilet

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, compl

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.Premium 100% Acrylic Emulsion Gr floor

a)Priming one coat on steel or othe rmetal surfacewithsyntheticoil boundprimerofapprovedqualityincludingsmootheningsurfacesbysand papering etc.

(b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary a)On timber or plastered surface :With super gloss (hi-gloss) - Two coats (with any shade except white)

b)On steel or other metal surface :With super gloss (hi-gloss) - Two coats (with any shade except white)

Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall)

Supplying, fittingandfixing10l litreP.V.C. low-downcisternconformingto I.S. specificationwithP.V.C. fittingscomplete,C.I. brackets includingtwo coats of painting to bracket etc

Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing).580 mm X 440 mm

Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc. With P trap

Wash basin vitreous china of approved make (without fittings) supplied,fittedand fixed inpositionon75mmX75mmX75mmwood blocks and C.I. brackets including two coats of painting of C.I. brackets550 mm X 400 mm size.

Supplying,fittingand fixingapprovedbrandP.V.C.CONNECTORwhite flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia 750 mm long.

Supplying,fittingandfixingapprovedbrand32mmdia.P.V.C.wastepipe, with PVC coupling at one end fitted with necessary clamps 750 mm long

Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75mm X 75 mm X 75 mm wooden blocks complete 635 mm X 395 mm X 420mm

Supplying, fitting and fixing best quality Indianmake mirror 5.5mm thick withsilveringasperI.S.I. specificationssupportedonfibreglass frameof any colour, frame size 550 mm X 400 mm

Supplying, fitting and fixing towel rail with two brackets 25 mm dia. and 600 mm long Aluminium

Supplying, fitting and fixing 18 mm thick marble partition slab with chawkdoongri marbel square cut, both sides polished with two front cornersrounded and edges polished

Supplying, fitting and fixing bib cock or stop cock. Supplying, fitting and fixing alloy iron with brass spindle bib cock/ stop cock of approved brand and make, spray painted and tested to 21 kgper sq. cm.15mm

Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.)

Supplying, fitting and fixing in position R.C.C. Manhole/ pit cover of approved make with rim of approved make (Heavy 560 mm dia

Cleaning silt of master trap pit.

Supplying, fitting and fixing pillar cock of approved make CP Pillar Cock- 15 mm. (Equivalent to Code No. 507 & Model Tropical / Sumthing Special of ESSCO or similar brand)

Cleaning soak pit by removing the top slab and replacing inner filling withjhama bats and repairing the pit as necessary including fitting the slab.

Removing sludge from septic tank, soak well etc. by methor labour includingdisposal of the same outside the compound as directed 50 Users Beyond a lead of 150 metre and outside the Municipal limi

Supplying, fitting and fixing CPVC (ChlorinatedPolyvinylChloride)pipesofapprovedmakeconformingo IS-15778: 2007 . with all necessary accessories,specialsviz.socket,bend,tee,union,cross,elbo,nipple,longscrew,reducingsocket,reducingtee,shortpieceetc.fittedwithholderbats clamps, includingcuttingpipes,fitting, fixingetc. complete inall respect ngsasrequired,jointingmaterialsinanypositionaboveground. (Paymentwill bemadeonthecentrelinemeasurementsof totalpipelineincludingall specials. No separate payment will be made for accesories, specials. For Exposed work 15mm

Supplying, fitting&fixingUPVCpipesA-Typeandfittingsconformingto IS:13592-1992withall necessaryclampsnails, includingmakingholes in walls, floor etc. cutting trenches in any soil throughmasonry concrete structuresetcifnecessaryandmendinggooddamagesincludingjoiningwith jointing materails (Spun Yarn,Valamoid/Bitumen/M-Seal etc) complete.110mm

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 Double Socketed 3 Meter Length 110mm

Single Socketed 1.8 Meter Length

i) Plain Tee 110

ii) Door bend 110mm

iii)( Cross Tee with door

Making one set of scaffolding only for replacing glass panels, painting,uprooting plant and another repairing works of building and S&P works for external works only with 10 cm. dia bamboo as main posts at the rate of 1 metre centre to centre and 7.5 cm. dia bamboo ties @ 0.75 metre apart fitting and fixing with necessary coir, nails etc. as per direction of the Engineer-incharge. 11.10 Mtr Height

Shift

Total Amount