Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹11.4 LAccepted-AOC BASGO LEH 194 101 U T LADAKH INDIA | LEH LADAKH | LADAKH | 194101 | L-1 | Accepted-AOC Tender accepted due to lowest and quoted reasonable rates | |
| 2 | L-2₹11.9 L+₹50,781.56 (4.45%)Rejected-Finance | L-2 | Rejected-Finance Higher side quoted amount | |
| 3 | L-3₹12.0 L+₹63,021.06 (5.52%)Rejected-Finance SHAMSHU COMPLEX FORT ROAD LEH LADAKH 194101 | LEH | LEH | LADAKH | 194101 | L-3 | Rejected-Finance Higher side quoted amount |
Tender Value
Refer Docs
EMD Value
₹33,320
Closing Date
25 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Khumbathang
CWE Khumbathang
SPL REPAIR OF 12XFFL OF 24 RAJPUT AND SPL REPAIR TO OF 05XTOILETS AND 06XBATHROOMS , AT NIMU UNDER AGE(I)NIMU
2022_MES_554965_1
80051/89/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
Nimu
As per tender and NIT doc
8 documents required · 8 mandatory
₹500
AGE(I)Nimu
₹33,320
Yes
15 Nov 2022
28 Sept 2022
26 Oct 2022
28 Sept 2022
25 Oct 2022
12 Oct 2022
Amount
Sch "A' Part-I B/R work:- Dismantling of floor hearth and wall tiling including cement mortar bedding (but not backing) and removing serviceable like to store and rubbish off the premises, complete all as specified and directed by Engr-in-Charge
M&L Non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including laid over screed bed of 15mm thick of cement mortar 1:6 all as specified and directed.
Dismentling existing water tank of capacity exc.250 ltr to 500 ltr and removal to store yard all as specified and as directed.
S&F 500 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 02 nos 20mm dia tank nipple and 01 Nos 32mm dia drain plug complete all as specified in SSR Part I
Taking up or down water tubing & connections, including cleaning for re-fixing or removal to store of 20mm bore, complete all as specified and directed by Engr-in-Charge.
Taking up or down water tubing & connections, including cleaning for re-fixing or removal to store of 25mm bore, complete all as specified and directed by Engr-in-Charge.
S&F 20mm dia 3-layer PP-R ( Polylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc., complete all as specified and directed by Engr-in-Charge.
S&F 25mm dia 3-layer PP-R ( Polylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc., complete all as specified and directed by Engr-in-Charge.
S&F in repair 20 mm bore ball brass valve, high pressure, with polythene float and fly nut complete screwed for iron pipe or for brass ferrule all as specified and directed by Engr-in-Charge.
S&F in repair 15 mm PVC connection of 600mm long
S&F in repair Bib taps 15 mm bore,fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for brass ferrule complete all as specified and directed by Engr-in-Charge.
S & F in repair 15mm bore Angle valves, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-charge.
S & F in repairs stop valves suitable for 20 mm bore iron pipe, cast copper alloy, chromium plated, screwed down, high pressure, fancy type, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed by Engr-in-Charge.
S&F in repair PVC low level valveless, flushing cistern 10 Ltr capacity with inlet , ball valve, float valve and handle & including brackets for fixing to walls and PVC flush pipe of LDPE pipe of pressure rating 6 kg (f)/ sq.cm complete all as specified and directed by Engr-in-Charge.
S & F in repairs stainless steel squatting pan of pattern “orissa”, size 580 x 440 mm standard ivory with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe) complete all as specified and directed by Engr-in Charge.
S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor of 110mm bore pipe complete all as specified and directed by Engr-in-Charge.
S&F in repair PVC (SWR) vent cowl 110mm in bore complete all as specified and directed by Engr-in-Charge.
S&F in repair PVC (SWR) bends any radius of 110mm bore complete all as specified and directed by Engr-in-Charge.
S&F in repair PVC (SWR) junction single, (single-T), equal or unequal of 110mm bore complete all as specified and directed by Engr-in-Charge.
S&F in repair PVC (SWR) 'P' trap 110mm bore complete all as specified and directed by Engr-in-Charge.
M&L for preparation of old surfaces of steel of any description , over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge ..
Taking down shutters of any description exc. 1.00 sqm but not exc. 2.00sqm for refixing or removal to MES store yard all as directed.
Refixing in same opening except shutters of any discription but exc 1Sqm and n.exc 2 sqm each
S&F 100mm long butt hinges, medium weight, cold rolled mild steel
S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised
S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy.
S&F 150mm long aluminium anodised, barrel tower bolts of extruded section
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, roof coverings & wall
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
Excavation over area not exceeding 1.5 m depth and getting out in hard/ dense soil, complete all as specified and directed by Engr-in-Charge.
All as per item No 30 here-in-before but exceeding 1.5 m and not exceeding 3.00 m depth.
Demolition of brick or stone/block masonry built in cement mortar or laid dry including all quions, arches, pillars etc., but excluding ashlar facings, dressed stone works and precast cement articles, complete all as specified and directed by Engr-in-Charge.
Demolition of stone/boulder masonery, laid dry complete all as specified and directed by Engr-in-Charge.
M&L for stone masonry walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, bulit in cement mortar 1:4, complete all as specified and directed by Engr-in-Charge.
M&L stone walling of random rubble, uncoursed, well bonded, laid dry in retaining walls, abutments and similar work brought to course complete all as specified and directed by Engr-in-Charge.
S&F mild steel TMT bars 10 mm dia and over, cut to length , bent to shape required including cranking , bending spirally for hooping for columns, hooking ends, binding with and including mild steel wire ( annealed ) not less than 0.9mm dia , complete all as specified and directed by Engr-in-Charge.
M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, shelves and similar work not exc.200 mm thick (horizontal or slopping) for fair finished flat surfaces all as specified and as directed.
Demolition of reinforcement cement concrete of any description and in any position not otherwise specifically provided for all as directed.
M&L for RCC nominal mix, M-20 ( using 20 mm graded crushed stone aggregate ) as in Beams, cantilevers, bressummers, lintels over 1.5m span (Note:-TMT bars will be masured and paid sepretly)
M&L for RCC nominal mix, M-15 type B-1 ( using 20 mm graded crushed stone aggregate ) as in slabs supported on walls, beams and columns in floors, roofs, complete all as specified and directed by Engr-in-Charge. (Note:-TMT bars will be masured and paid sepretly)
Precast reinforced cement concrete, type B-1,1:2:4 (using 20mm graded crushed stone aggreagate)as in manhole cover set in cement mortor 1:4 , complete all as specified and directed by Engr-in-Charge. (Note:-TMT bars will be masured and paid sepretly)
Demolition of PCC (un-reinforced) in ground floors & pavings n.exc 15 CM thickness below or above ground level, complete all as specified and directed by Engr-in-Charge.
M&L for Plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed by the Engr-in-Charge.
Returning filling in including spreading, levelling, watering and well remming in layers not exceeding 25cm thick in hard/dense soil complete all as specified.
Removal to excavated material (Soil) to a distance not exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge.
Excavation in trenches, not exceeding 1.5 m wide and not exc 1.5 m in depth for foundation, laying of pipes etc and not exceeding 10 sqm on plan for manholes etc and getting out in hard/ dense soil, complete all as specified. and directed by Engr-in-Charge.
M&L for Precast cement concrete type-C-1 block masonary with solid blocks 1:3:6 (using 20mm graded crushed stone aggregate) exc. 10cm in width and setting in cement mortar (1:6), complete all as specified and directed by Engr-in-Charge.
M&L for rendering 15 mm thick on fair face of brick work or concrete/stone surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L for rendering 10 mm thick on fair face of brick work or concrete/stone surfaces in CM 1:4 with WPC and finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. Note:- WPC will be masured and paid sepratly
Supply only water proofing compound ISI marked.
M & L for Cement Concrete , 1:2:4, type B1 using 20mm graded agg as in lintel upto 1.50 m span, cills, steps, seismic and other silmilar bands, plinth courses, sring courses,lacing courses, parapets and railings upt 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in item 04028, water troghs and the like including weathering, slightly rounded or camphered angles and throating, complete all as specified and directed by Engr-in-Charge.
S & F in repair 20mm dia Brass chromium plated tubular towel rail 600mm long D type incl a pair brackets fixed to wall complete all as specified and directed by Engr-in-Charge.
S & F in repair CP shop dish with CP brass screws fixed to wall complete all as specified and directed by Engr-in-Charge.
Sch "A' Part-II E/M work:- Taking down carefully copper or aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, sockets bulk, head fitting, tube light fitting by unscrewing carefully from boards etc and making good, distrubed surface of walls floors etc.
M&L for point wiring with two single core PVC insulated, unsheathed, FRLS type, 1100 volts grade, multistranded copper conductor cable 1.5 sqmm in and including PVC casing caping ISI marked with all connected accessories including one single core multistanded PVC insulated FRLS type, 1.5 sqmm copper conductor cable unsheathed as earth continuity cable including closed recessed wooden terminal boxes of suitable size made of 2nd class hard wood for mounting switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet top cover complete all as specified. (a) One light /fan/bell point/buzzer point exhaust fan controlled by one nos, one way 5/6 Amps switch.
S&F in repair Switch piano, flush type single pole, one way 6 Amp
S&F in repair Ceiling rose 65x50mm, 2 to 3 terminal PVC/polycarbonate, isolated body
S&F in repair LED lights fitting indoor type 1x 10W, 2 feet, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
S&F in repair LED light fitting 1x9W/1x10W bulkhead luminaries including LED light driver holder connecting up three core flexible copper conductor cable of suitable size.
S&F in repair sheet metal powder coated versatile double door SPN distribution board, 4 way suitable for MCB's fitted with copper bus bar rated 200amps, neutral link , earth bar and din rail suitable for use on 240 Volt, 50Hz .
S&F in repair MCB SPN 32 Amp 240 volt AC with 10KA breaking capacity of 'C' series in distribution boards all as specified and directed.
S&F in repair MCB SP 6-32 Amp 240 volt AC with 10KA breaking capacity of 'C' series in distribution boards all as specified and directed.
S&F in repair 1100 volts grade heavy duty 4 sqmm 2 core flat cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 01 metre apart including 4 mm suspension complete all as specified.
Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 49,205.00 and any other reduction if any from quoted amount.
TSEWANG DORJAY
M/S INDUS HIMALAYAN EXPLORERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .