WELCOME MAINT OF OFFRS MD ACCN UNDER AGE BR- I OF GE (W) AGRA

Amount

Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc. but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and as directed.

M & L for brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1: 6 all as specified and as directed.

All as per item No 2 above but except bricks.

Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, and removal of debries to a distance exc 1.5 Km but not exc 5.0 Km all as specified.

M&L for 5 mm thick ready mix plastering on brick or concrete surfaces of ceiling,facia,roof projection etc as per manufacturers specification, surface finished even and fair complete all as specified and directed.

M&L for 15 mm thick ready mix plastering on internal /Externalsurface of brick or concrete surfaces complete all as per manufacturers specification, surface finished even and fair complete all as specified and directed.

M&L for 20 mm thick ready mix plastering on roof surface of brick or concrete surfaces including providing & mixing 2% water proofing compound of wt of ready mix plaster as per manufacturers specification, surface finished even and fair complete all as specified and directed.

M&L for providing & applying average 1mm thick of Birla/ JK wall care putty over prepared surface to achieve the surface even and smooth for painting, complete all as specified and as directed

M&L for prepration of new plastered ceiling surfaces and applying three coat of white washing complete all as specified and directed

M&L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion white or tinted with roller, over complete all as specified and directed.

M&L for preparation of new surface of walls (external surfaces) and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) innormal pattern, as per manufactures instructions etc complete all as specified and as directed.

M&L for preparation of new/old plastered surfaces of concrete surface/plastered surface and applying three coats of smart care damp proof ultra of asian paint or similar with roller, as per manufacturers instruction and directed.

M&L for complete removal of existing treatment of old surface including brooming down/ steel wire brushing, scrapping down smoke soot, mould, mos and efforescent salts and trading oil and gresy spots and cleaning with water on wall (Height upto 25 Mtr) complete all as specified and as directed.

M&L for old plastered surfaces of walls and applying two of distemper oil emulsion white or tinted with roller,incl repair of holes and cracks complete all as specified and directed.

M&L for old surface of walls (external surfaces) and Finishing walls with Acrylic Smooth exterior normal paint of required shade,two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed.

M&L for preparation of old plastered surfaces of ceiling and applying one coat of distemper oil emulsion white or tinted, complete all as specified and directed.

M&L for prepration of old plastered ceiling surfaces and applying one coat of white washing complete all as specified and directed

M&L for preparation of old plastered surfaces of walls and applying one coat of distemper oil emulsion white or tinted with roller,incl repair of holes and cracks complete all as specified and directed.

M&L for preparation of old surfaces and applying One coats of exterior emulsion paint in normal as per manufacturers instructions etc complete all as specified and directed by Engr-in-charge. Note:- (1) Primer and emulsion to be carried out through air less spray machine (Mechanical means).(2) repair of pot holes, cracks and undulation in surface with wall care putty as required.

M&L for preparation of old painted surfaces of any description over 10cm girth or width,not otherwise described and applying two coats of Plastic emulsion paint complete all as specified and directed.Note:- Plastic emulsion paint to be applied through mechanical means only.

M & L for prepararing old decorated steel surfaces by washing down over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as directed.

M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down GI pipe of any grade of 15mm bore including fittings complete all as specified and directed.

Taking down GI pipe of any grade of 20mm bore including fittings complete all as specified and directed.

S&F steel water tubing medium grade galvanized with all fittings and fixed complete to walls, ceilings or laid on floors, bore of tube 15mm complete all as specified and directed.

S&F steel water tubing medium grade galvanized with all fittings and fixed complete to walls, ceilings or laid on floors, bore of tube 20 mm complete all as specified and directed.

S & F in repairs PVC valveless,syphonic action type,low level PVC flushing cistren 10 ltr cap white with flush pipe & all fitting complete all as specified and directed.

S&F in repair 15 mm bore bib taps fancy type ,chromium plated, long neck cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified.

S&F in repair 15mm dia, stop valve fancy type, cast copper alloy,chromium plated ,screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions complete all as specified and directed.

S&F in repair 15mm dia, stop valve fancy type with long shank and cup (concealed type), cast copper alloy,chromium plated ,screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions complete all as specified and directed.

S & F in repair 15 mm bore pillar tap fancy type , cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe all as specified and directed.

S&F in repair CP wall mixer for mixing Hot & cold water screwed down for iron pipe 15mm bore complete all as specified and directed.

S&F in repair CP wash basin mixture fancy type, with capstan heads, chromium plated, screwed down for high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for 15mm iron pipe and fixed comple all as specified and directed .

S&F in repair 20mm dia PTMT ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed.(min wt- 210 gms), complete all as specified and directed.

S&F in repair chromium plated soap dish, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair gratings of 125mm dia made of stainless steel with waste hole complete all as specified and directed

S&F in repair Chromium plated shower rose rectangular 125mm with shower arm ABS full chrome with or without swivel joints, any size, including fixing with GI pipe of 15 mm bore complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair Chromium plated Health Faucet for bore size 15mm (flexible tube and hand shower) ,wall mounting type suitable for EWC; with CP nuts and washer incl square hook ABS , of length 900mm complete all as specified and directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 6 cm wide complete all as specified and directed.

Dismantling PVC water tanks of capacity exc 250 ltrs but n.exc 500 ltrs in any position and removing from site complete all as specified and as directed.

Dismantling PVC water tanks of capacity exc 500 ltr but n.exc 1000 ltrs. in any position and removing from site complete all as specified and as directed.

S&F tripple layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I of 500 ltrs capacity with & including 20mm dia PTMT float valve complete all as specified and directed.

S&F tripple layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I of 1000 ltrs capacity with & including 20mm dia PTMT float valve complete all as specified and directed.

S&F in repair wash basin waste coupling 32 mm dia of CP (half or full threaded) Minimum weight 45gms complete all as specified and directed.

S&F in repair sink waste coupling 40 mm dia of CP (half or full threaded) Minimum weight 60 gms complete all as specified and directed.

S&F in repair flexible PVC waste pipe of 32 mm dia, 600 mm long complete all as specified and directed.

S&F in repair chromium plated Toilet paper holder incl movable flap and fixed to walls with chromium plated brass screws complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white, (flat back or angle back type) of size 580x450 mm including supplied and fixing angle iron braket and CP Pillar tap fancy type 15 mm bore,CP waste coupling, PVC waste pipe 32 mm dia, and 01 No PVC connection 15 mm dia & 450 mm long complete all as specified and directed.

S&F in repair sink with drainage board made of stainless steel 1 mm thick with plug and washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe overall size 915x460 mm and bowl size 410x330x160 mm complete all as specified and directed.

S&F in repairs vitreous china squatting pan orissa pattern of size 580mm x 440mm, white with 'P' or 'S' trap front of back inlet and integral foot rest complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan pedestal pattern white with and including fixing bolts, flushing cistern, flush pipe, PVC connection ,seat cover complete all as specified and directed.

S&F in repair plastic seat cover for EWC with & including hinging device complete all as specified and directed.

S&F in repairs CP tubular towel rail 25 mm dia, D type, 600mm long between flanges complete all as specified and directed .

S&F in repair brackets for WHB, of angle iron 35mm x 35mm x 5mm of required length with and including embedding in PCC 1:2:4 type B1 and two coats of painting with synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed

M&L for 50 mm thick PCC (1:3:6) type C2 using 20mm graded stone aggregate as in sub base of floor etc complete all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding and removing rubbish off the premises complete all as specified and as directed

M&L for 25 mm thick PCC 1:2:4, type B0 (using 12.5 mm graded stone aggregate) as in flooring in leveling course complete all as specified and as directed

M&L for light shade vitrified ceramic tiles, joint free (edge cut) coloured , 9 to 10mm thick (square/ rectangular) polished, area of each tile n.exc 0.36 sqm, in floors etc laid over with and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete.

M&L for light shade vitrified ceramic tiles, joint free (edge cut) coloured , 9 to 10mm thick (square/ rectangular) polished, area of each tile n.exc 0.36 sqm, in vertical surfaces etc laid over with and including 10 mm thick rendering for backing layer in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete.

M&Lfor outdoor coloured industrial textured surfaces with high skid resistance ,scratch resistance,impact resistant,joint free(edge cut) of size 300mm x 300mm x 8-10mm thick as in floor etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6,set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed..

M&L for Non skid, joint free (edge cut) coloured ceramic tiles 7 to 8 mm thick (Square / rectangular) polished area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc laid over with and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete.

M&L for glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm/300x450x 7mm thick with and including 10mm thick rendering for bedding layer in CM 1:4, set and jointed in neat cement slurry and pointed with white cement complete all as specified and as directed.

M&L for Non skid, joint free (edge cut) coloured ceramic tiles 7 to 8 mm thick (Square / rectangular) polished area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in vertical surfaces laid over with and including 10 mm thick rendering for backing layer in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete.

M&L for Green Marble work (Baroda green) 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types complete all as specified and as directed.

Taking down door chowkhat with shutter area n.exc 1.5 Sqm each (without taking off shutters from the frame) including making good of jambs with cement mortar 1:4 etc complete all as specified and as directed.

Taking down chowkhats or frames with shutters exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutters from the frame) including making good of jambs with cement mortar 1:4 etc complete all as specified and as directed.

S&F in repair factory made 30 mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both sides incl 5mm thick teakwood leaping alround complete all as specified and as directed

M & L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surface over 10 cm width or girth, not otherwise described complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fixed in opening as per specification and shown in drg in SSR Part -II 2020 complete all as specified and as directed

S&F factory made solid panel PVC door moulded shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain cover PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement as per specification and drg shown in SSR Part -II 2020 complete all as specified and as directed

S&F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples at height upto 15.0 mtr complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) indluding wooden beading from wooden/iron or aluminium frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed

S&F 3mm thick figured glass, pin head type and glazing with oil putty in square area n.exc 0.5 Sqm in each pane complete all as specified and as directed

S&F figured sheet glass 3.00mm thick pin headed type and glazing with oil putty complete all as specified and directed.

S&F mild steel hold fast and similar small article confirming to fe 410-0 or fe 310-0 complete all as specified and directed.

S&F 300mm long stainless steel finished sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete all as specified

S&F stainless steel finished butt hinges medium weight cold rolled of size 100mm complete all as specified and as directed.

S&F 100 mm long stainless steel finished barrel tower bolt of extruded section complete all as specified and as directed

S&F 200 mm long stainless steel finished barrel tower bolt of extruded section complete all as specified and as directed

S&F 100 mm long stainless steel finished handle fabricated type complete all as specified and as directed

S&F 150 mm long stainless steel finished handle fabricated type complete all as specified and as directed

S & F in repair 25 mm dia SS drapery rods fancy type with brackets ,stops, rollers ,side knobs etc complete all as specified and directed.

S&F in repairs 300 mm long ordinary rat tail rod pattern springs including roller and roller plate complete and fixed to chowkats with welding or screws as per requirement complete all as specified and directed.

M&L preparation of new or previously untreated steel surfaces exc 10 cm width or girth and applying two coat of synthetic enameled paint over one coatof red oxide primer complete all as specified and directed.

M & L for powder coated (any colour) anodized aluminium (sliding type) windows with three track bottom track size 92X29.5X2mm thick side and top track frame size 92X29.5X2mm and shutters powder coated aluminium anodized 39X20X2 mm thick (02 of glass and 01 of SS wire cloth) including necessry aluminium fittings like joint cleat glazing and gauging clips/strips and rubber packing anodized aluminium snap beading screws etc with 5mm thick tinned glass/SS wire mesh with etc including all fittings & fixture and incl taking down old window complete all as specified and directed.

M & L for powder coated (any colour) anodized aluminium (sliding type) windows with two track bottom track size 92X29.5X2mm thick side and top track frame size 92X29.5X2mm and shutters powder coated aluminium anodized 39X20X2 mm thick (02 of glass and 01 of SS wire cloth) including necessry aluminium fittings like joint cleat glazing and gauging clips/strips and rubber packing anodized aluminium snap beading screws etc with 5mm thick tinned glass/SS wire mesh with etc including all fittings & fixture complete all as specified and directed.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good in brick walls, cutting exc 10 cm but n. exc 20 cm girth, complete all as specified and directed.

M&L for 40mm thick sand stone slabs,dressed close picked on exposed faces, set and jointed in cement and stone dust mortar 1:3 and pointed in cement mixed with approved pigment to match complete

Dismantling structural steel work including door, gates but excluding framed truss etc all as directed by Engineer-in-Charge.

S&F for Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete conforming to Fe.290.Gde-E-165 and incl preparation of new steel surfaces and two coat of synthetic enamel paint over a coat of primer complete all as specified and as directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc. but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and as directed.

M&L for brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1: 6 all as specified and as directed.

All as per item No 95 above but except bricks.

M&L for 15 mm thick ready mix plastering on internal /External surface of brick or concrete surfaces complete all as per manufacturers specification, surface finished even and fair complete all as specified and directed. Make :JSW (enduro plast)/ Ultratech(readiplast)/Birla(aerocon)

M&L for preparation of new surface of walls (external surfaces) and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) innormal pattern, as per manufactures instructions etc complete all as specified and as directed.

S&F in repair 110mm dia PVC (SWR) pipes single socketed, in any length, laid in trenches or in floors / fixed to walls with and including stack clamps complete all as specified and as directed

S&F in repair bend suitable for 110mm dia PVC (SWR) pipe complete all as specified and as directed

Demolition of cement concrete in ground floor and paving n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed

M&L for 100mm thick PCC (1:3:6) type B2 using 40mm graded stone aggregate as in sub base of floor etc complete all as specified and as directed

M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors and including 20mm thick screed bed in CM (1:6) of approved colour and pointing with grey cement and pigment complete all as specified and directed.

C P Singh and Co (BID ID -3155255)

M/s Rahul Kumar Agrawal (BID ID -3155464)

RAJESH ENTERPRISES (BID ID -3155195)

Rahul Construction Co (BID ID -3154119)

M/S MAKHIJA TRADERS (BID ID -3155088)

Bhakti c (BID ID -3151987)

BHULLAR CONSTRUTION COMPANY (BID ID -3155154)

R.S BUILDERS (BID ID -3155282)

SahaDevSingh Constructions (BID ID -3153606)

MNR ASSOCIATES (BID ID -3153927)

Attar Singh and Sons (BID ID -3154448)

PD GUPTA AND COMPANY (BID ID -3155240)

S S TRADERS (BID ID -3155142)