CERTAIN REPAIR OF WOODEN,STEEL, ALUMINIUM JOINERY, PLASTER , ROOF , FLOOR AND WALL TILING, CEILING, WALL PANELLING, PLUMBING, SANITARY APPLIANCES ETC AT HQCC, MUPSA BLDGS LOCATED IN ZONE-C AREA OF AGE BR-I UNDER GE (E) LUCKNOW.

Amount

Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for in this Schedule complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete complete all as specified and directed.

Taking down chowkat or frame with shutters area not exc 1.5 Sqm each (without taking off the shutters from the frame) including irom mongrey and cutting holes for hold fasts & making good complete all as specified and directed.

Taking down chowkat or frame with shutters area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the shutters from the frame) including iron mongery and cutting holes for hold fasts & making good complete all as specified and directed.

Taking down shutters exc 1 sqm but n.exc 2 Sqm each complete all as specified and directed.

Taking down shutter of any description not exc 1 Sqm each and refixing in same opening including easing and adjusting of shutter as required including renewal of unserviceable screws complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each and refixing in same opening including easing and adjusting of shutter as required including renewal of unserviceable screws complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises,complete all as specified and directed.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc, complete all as specified and directed.

Dismantling AC sheet (Corrugated, Semi Corrugated etc) as in roofs etc including ridges complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, platform, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

Dismantiling boarding, any description fixed in any position with nails complete all as specified and directed.

S&F, 500 Ltr capacity rotational moulded polyethylene water storage tanks ISI marked (cylindrical vertical with closed top in white colour) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing tank complete all as specified and directed.

S&F, 1000 Ltr capacity rotational moulded polyethylene water storage tanks ISI marked (cylindrical vertical with closed top in white colour) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing tank complete all as specified and directed.

S&F, 2000 Ltr capacity rotational moulded polyethylene water storage tanks ISI marked (cylindrical vertical with closed top in white colour) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing tank complete all as specified and directed.

M&L providing precast cement concrete jallies, PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate 25mm thick (measured solid) including all moulding but excluding frame and set in C:M 1:6 complete all as specified and directed.

M&L, 20 mm thick granite (of any type and colour ) work (table rubbed and polished ) in steps, Jambs, pillars, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of granite complete all as specified and directed.

M & L for machine cut kota stone slab flooring 20-25mm thick over cement screed bed 15mm thick in CM 1:6, base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

S&F exterior tiles of superior qulaity300mmx300mm x 25mm thick of approved size/design/shade set & jointed in neat cement slurry & pointed in white or coloured cement to match as in floor over and including 20mm thick screed bed in CM 1:4 , complete all as specified and directed.

M&L Glazed ceramic tiles in vertical surfaces 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to matchover 10mm thick rendering in cement mortar 1:3 complete all as specified and directed.

M&L for glazed ceramic tiles (coloured) 600mm x 300mm x 7mm to 8mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering (as screed bed) in cement & sand mortar 1:3 complete all as specified and directed.

M&L for Non skid Ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:4 complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick(square/ rectanglar) area of each tiles exc 0.11 Sqm but not exc 0.18 Sqm in floor including screed bed 15mm thick or beding layer for laying floor finishes CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

S&F vitrified ceramic tiles dark/light shade, 10mm thick (square/ rectanglar) polished , area of each tiles not exceeding 0.36 sqm, in floors etc. laid over 15mm thick screed bed 1:4 , set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified and directed.

S&F in repair 60 thick M-35 grade ISI Marked, Machine pressed concrete rubber moulded interlocking coloured paver block of any shape and size with grey cement and pigment over including 25 mm thick sand cushion complete all as specified and directed.

S&F solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS Square tube etc complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting frame made out of MS tube for top and bottom rail MS frame shall be covered with heat mould plaint colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for style and plain colour PVC sheet for top rail lock and bottom rail on either side and as gap insert for top rail and bottom rail plain colour PVC sheet tape fixed in MS frame welding sealed to the style and rail with suitable PVC sheet bearing and jointing together with solvent cement etc complete all as specified and directed. Make : Rajshree/Sintex

M&L for brick work with old size fly ash bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for brick work with old size fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on stone masonry surfaces or surfaces other than fair face of brick work of walls, finished even & smooth without using extra cement, complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement, complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on fair surfaces of walls finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint over a coat of alkali resistant primer complete all as specified and directed.

Preparation of new plastered surface of wall and applying three coats of white wash on wall complete all as specified and directed.

Preparation of new or previously undercoated surface of ceiling and applying three coats of white wash on ceiling complete all as specified and directed.

S&F glass dividing strips 3mm thick and 38mm wide & fixed in position complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate with concrete surface even and smooth with using extra cement as in flooring, complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4, type B1 using 20mm graded crushed stone aggregate as in flooring, finished even and smooth without using extra cement,complete all as specified and directed.

M&L for 75 mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in sub base, complete all as specified and directed.

M&L for cement concrete 1:3:6 type C2 , 75 mm thick as in plinth protection and flooring and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for 2nd class hard wood, wooden beading, plain fillets, square or rectangular or tringular in section clean sawn sectional area exc 3 sqcm but not exc 6 sqcm fixed with nail complete all as specified and directed.

S&F plain, solid, straight chowkats and frames of second class hardwood, wrought, framed rebated on the solid rounded or chamfered, put together with glue, pinned at joints, complete all as specified and directed.

S&F 30mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and fixing 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 (a) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified and directed.

Supply and fixing 30mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 (b) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified and directed.

S&F 2nd cl H/W rail and style , 35mm thick factory made plain framed panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile complete all as specified and directed.

S&F butt hinges of size 100mm medium weight, stainless steel ISI marked complete all as specified and directed.

S&F butt hinges of size 75mm medium weight, stainless steel marked complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 125mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F 150 mm size aluminium alloy handles, fabricated type, extruded section complete all as specified and directed.

S&F 100 mm size aluminium alloy handles, fabricated type, extruded section complete all as specified and directed.

S&F in repairs aluminium extruded section body door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg. and fixed complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness including cover filltets complete all as specified and directed.

S&F E-board 'Everest' or equivalent make 600 x 600 x 4mm tk white prelaminated sett embosed reinforced desigener (lake & HM as approved ceiling board/tiles at all height laid on Armstrong Hot dipped Galvanised imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work will comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plugs, level and justers and screws etc.complete all as specified and directed.

M&L for cutting holes in stone/ brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3, not exc. half brick thick (Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall) complete all as specified and directed.

S&F floor door stopper as in repair of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed.

S&F anodised aluminium grill (opening of gril not more than 100x100mm) fixed to windows or ventilators with anodised aluminium U channel 25x12mm size complete all as specified and directed.

S&F aluminium anodised frame/chowkat of Alu door fixed with rawal plug and screw or wire expansion hold fasteners complete all as specified and directed. make Jindal/Hindalco

Providing and fixing anodized aluminium partly glazesd and partly paneled door shutter side hung type using 1.50mm thick standered door section having size of styles, top rails 83x44mm where as bottom rails will be made up of 100x44mm Make: Jindal/Hindalico including necessary joining cleats glazing clips, rubber packing, anodized aluminium snap beading screws, anodized aluminium fittings such as 100mm long 3 No. aluminium hinges B-21 ,type 01 No. aluminium tower bolt 200mm long and one no mortise lock 100mm size 4 levers (vertical type) and 01 No 300mm size long aluminium sliding bolt and 02 No fancey type fiber glass 150mm dia circular handle shall be provided to each door and glazing of top panel shall be made of 5.50 thick sheet glass make - Modi/ Saint gobin and pannelling shall be provided with 12mm thick exterior grade pre laiminated partical board with both side choice laminations, complete all as specified and directed.

M&L as in repair for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, fixed in repairs, with & including replacement of floor tiles if any broken during repair work and making good disturbed surfaces matching to the existing surfaces complete all as specified and directed.

Supply and fixing 6 mm thick asbestos cement, corrugated or semi corrugated sheets in roofs, walls etc and fixed with ‘L’ type or ‘J’ type or cranked hooks bolts complete all as specified and directed.

M&L for 6 mm thick asbestos cement two piece adjustable plain wing ridge for corrugated or semi corrugated sheets fixed with ‘L’ type or J type or cranked hook bolt complete all as specified and directed.

S&F anodised alumium glazed window shutter sliding type using 1.30 mm thick aluminium open three track section having size of style & top rails 83x44mm, bottom rils 100x44mm Make jindal/Hindalco including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading screws, anodised aluminium fittings complete and glazing shall be done by using 5mm thick plain sheet glass Make- Modi guard/saint gobin) and steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and directed.

S & F as in repair 20 mm dia mild steel PVC Coated fancy type curtain rod including Fancy Knobs and bracket complete all as specified and directed.

S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with coatch screw and washer in roof, wall etc,complete all as specified and directed.

S& F of pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in room covering/cladding to wall, including ridge cover fixed with self tapping screws etc complete all as specified and directed.

M& L for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as post holes etc complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames, glazed with putty or fixed with beads complete all as specified and directed.

Cleaning and removing all scale and dirt etc from tank and mouth of circulating pipe and refixing of capacity exc 250 not exc 500 ltrcomplete all as specified and directed.

Cleaning and removing all scale and dirt etc from tank and mouth of circulating pipe and refixing of capacity exc 500 not exc 1000 ltr complete all as specified and directed.

M&L 18/19 mm thick prelaminated particle board, interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work fixed as in repairs complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps 30mm (when open) fixed with CP steel screws complete all as specified and directed.

Taking up or down steel water tubing and connections of 15mm bore including cleaning to refixing or removal to store , fixed in walls, ceiling, floors, trenches etc ,M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Taking up or down steel water tubing and connections of 20mm bore, fixed including cleaning to refixing or removal to store in walls, ceiling, floors, trenches etc ,M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repair stainless kitchen plate rack made of 0.80mm thick sheet of size 900x1200 mm and fixed to wall complete all as specified and directed.

S&F in repair vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified and directed.

S&F in repairs vitreous china wash hand basin, white, flat back of size 550x400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified.

S&F Vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts flushing cistern and flush pipe ). and trap including connection to drain (or out going pipe) and to flushing pipe anti sphonage pipe etc complete including flush pipes and all joints add if fixed in repairs complete all as specified and directed.

S&F sink made of stainless steel 1mm thick for kitchen with plugs, washers and wastes, including fixing with cast iron cantilever brackets, bedding in cement mortar on to dwarf wall, connecting union to pipe, overall minimum size 495mm x 420mm bowl size 410mm x 330mm x 160mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, including taking down old unserviceable sink complete all as specified and directed.

S&F kitchen sink with drainage board made of stainless steel 1mm for kitchen with plugs, washers and wastes, including fixing with cast iron cantilever brakkets, bedding in cement mortar on to dwarf wall, conntecting union to pipe, overall mimimum size 915mmx460mm with bowl size 410mmx330mmx160mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waster fitting with long screwed shanks and fly nuts, flage end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, including taking down old unserviceable sink complete all as specified and directed.

S&F in repair viterious china coupled WC, with coupled closed bowl-WC P or S type with seat cover, hinges accessories set, cistern complete all as specified and directed. (Make : Jaquar, Cat No FNS-WHT-40751S and FNS-WHT-40201 or equivalent make of Hindware, Parrware, CERA

S&F Plastic water closet seat cover coloured/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair 10 Litres capacity PVC valveless syphonic action type flushing cistern low level, white with inlet ball valve float and handle including brackets connection to pipes and fixing of lever if any joint between flushing pipe and socket of WC pan pre-made complete all as specified and directed.

S&F in repairs vitreous china bowl type urinal flat back, size of 465 x 355 x 265mm (minimum) white including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with & including 60 mm long brass screws, pointing around urinal back in cement, with & including PTMT grating and union for discharge pipe including waste pipe of polythelene of low or high density or PVC 32mm dia complete all as specified and directed.

S&F in repairs brass chromium plated wall mixer for mixing hot & cold water in 3-in-1 with telephonic hand shower and 1.50m long flexible lead & screwed down for iron pipe of 15mm bore complete all as specified and directed.

S&F PVC connection of 15 mm bore 600 mm long with brass coupling on both ends of superior quality all as specified.PTMT nuts fixed as in repair complete all as specified and directed.

S&F in repairs PVC cabinet with mirror and door of size 560X410mm complete all as specified and directed.

S&F in repair brass chromium plated single hole basin mixer with hot and cold arrangement, long shank suitable 15mm bore of pipe of approved quality complete all as specified and directed.

S&F C P angle valve for 15 mm bore pipe fixed as in repair complete all as specified and directed.

S&F in repair 15mm dia fancy type chromium plated bib taps cast copper alloy with crutch or butterfly handle, scresed down screwed for iron pipe or for brass ferrule and fixed both ends for iron pipe or for unions complete all as specified and directed.

S&F gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe 20mm bore fixed in repair complete all as specified and directed.

S&F in repairs CP brass toilet paper holder fixed to wall with chromium plated brass screws complete all as specified and directed.

S&F 125 mm dia CP brass shower rose with or without swivel joints any size including fixing to steel pipe or union add if fixed in repair complete all as specified and directed.

S&F pegs set of 6 brass fancy type, all as specified fixed, as in repair complete all as specified and directed.

S&F CP brass towel rails 20 mm dia and 600 mm long fixed as in repair incl chromium plated brass screw and wooden / cleats complete all as specified and directed.

S&F in repair health faucet for EWC CP hand hold with flexible pipe complete all as specified and directed.

S&Fin repairs 15mm dia CP two way tap consisting angle valve to control water suitable for jet cleaner complete all as specified and directed.

S&F in repairs glass corner shelf assembly consisting of 5.5mm thick sheet glass 250X250mm size fixed with chromium plated brackets as in repairs complete all as specified and directed.

S&F in repair glass self assembly consisting of 5.5 mm thick glass sheet glass self 12 Cm wide with CP bracket gaurd and railing 60 Cm long complete all as specified and directed.

S&F as in repair mild steel helical door spring 150mm ordinary rat tail rod pattern spring including roller and roller plate including welding if required complete all as specified and directed.

S&F in repair cast iron floor trap with gratings incl jointing to waste pipe in run lead 75/100 mm out let complete all as specified and directed.

Repair to steel window, repair/replacement of hinges, window stay, handles etc. welding of hinges complete all as specified and directed.

S&F in repair ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density Plastic ball Screwed for iron pipe and fixed minimum weight 25mm -455 gms complete all as specified and directed.

S&F in repair ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density Plastic ball Screwed for iron pipe and fixed minimum weight 20 mm -210 gms complete all as specified and directed.

S&F in repair ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density Plastic ball Screwed for iron pipe and fixed minimum weight 15mm -142 gms complete all as specified and directed.

S&F in repairs brass spindle of any size or any make L&K,Gem,Cornet for bib taps/pillar taps/stop cock etc complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber rings joints laid in trenches or wall complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) pipe single socketed in any length with rubber rings joints laid in trenches or in floor/wall complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends, any radius complete all as specified and directed.

S&F PVC (SWR) bends any radius of 75 mm dia complete all as specified and directed.

S&F mild steel wire cloth 0.63 mm nominal dia of wire and average width of apeerture 1.40 mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

S&F in repairs hinges for modular kitchen shutter for any degree complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces complete all as specified and directed.

S&F 5.5mm thick sheet glass ordinary quality and glazing with oil putty/Aluminium beads in square exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces ground or obsecured to one side complete all as specified and directed.

M&L for preparation of new/old surface of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gussset plates, rails, braces etc complete drilled for fixing steel sheetings or other coverings. Doors etc to be prepared for hanging or sliding with and including either hooks or hinges steel hanging door fittings ( exclusive of steel sheeting or other coverings running rails and guides) and hanging also fastening and fixing complete quality conforming to quality B complete all as specified and directed.

S&F mild steel rolled/tubular sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters , fixed with angle cleats or other connecting plates etc. conforming to Grade Fe 410W(Gde E-265 quality `B’ complete all as specified and directed.

S&F in repair viterious china coloured WHB 600 x 480 counter top oval shape cascade pattern with pillar taps cast copper alloy capstan heads CP PVC connection, CP bottle trap cat part No 569 of jaquar and cp waste coupling 32mm dia in lead to waste pipe complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of zinc chrome primer complete all as specified and directed.

S&F in repair fancy type piller taps 15 mm cast copper alloy with capstan head chromium plated screwed down high pressure with or without lettered (hot or cold) with long screwed shanks and flynuts screwed for iron pipe and fixed complete all as specified and directed.

M&L for mild steel work as in hold fasts, bands, plain angle cleats, clamps, hooks, straps, stay for rain water pipe, pintle hinge, large hasp and staple, clamps conforming to Fe 290 or Fe 310-0 complete all as specified and directed.

S&F steel ventilator partly fixed and party tup hung/side hung with box type hing incl peg stay, lugs handle and glazing bar complete incl one soap coat of red oxide primer complete all as specified and directed.

M & L mild steel TMT bar 10 mm dia and over cut to length bent to shape required including cranking bending and binding with mild steel wire (annealed ) not less than 0.9 dia off confirming to grade Fe 310 complete all as specified and directed.

Demolition of Reinforced Cement Concrete works of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L precast RCC 1:2:4 type B-1using 20mm graded stone aggregate as in cover slab of main holes, drain and similar article with set in cement mortar 1:4 complete all as specified and directed.

S&F in repair stainless steel drapery curtain rods standard quality dia not less than 25mm with fancy type stainless steel latoo at both ends and Stainless Steel Bracket for middle support as required complete all as specified and directed.

M&L Providing cement concrete , Type B0 1:2:4 (12.5 mm graded aggregate ) in roof kerbs or mud stops,rounded or chamfered on edges or coping complete all as specified and directed.

M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efforescent salts, trading oil, greasy sopts etc and preparation of plastered surfaces and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of primer over & including white wall care putty 1mm thick (make: Biral/JK/Asian) on walls complete all as specified and directed.

S&F in repair soap dish CP fixed with and including chromium plated brass screw complete all as specified and directed.

S&F in repair 100 mm size PVC handle for cabinet shutter complete all as specified and directed.

S&F in repair magnet catcher for cup board shutter complete all as specified and directed.

S&F 5mm thk Polycarbonate corrugated sheeting with two corrugation side lap fixed with coach screw and washer fixed with L type or J type of hooks complete all as specified and directed.

Taking out existing aluminium frame with shutter and repair of all necessary items i.e hinge aluminium snap beading, rubber packing, glazing clip, door closer screw etc, any type of repair and making good disturbed portion of wall/floor incl refixing the same complete all as specified and directed.

S&F CP concealed stop cock for 15 mm bore pipe fixed as in repair complete all as specified and directed.

S & F in repairs Steel rolling shutter 1.25 mm thick, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer : erected in position as indicated, complete all as specified and directed.

S & F, Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

S & F, Ball bearing for rolling shutters complete all as specified and directed.

Supply only lock plate made out of angle iron 35x5mm and MS block sheet 12 gauge including hand made handle, locking arrangement etc complete of required size, complete all as specified and directed.

S&F 18/19 mm thick prilaminated particle board exterior grade laminated on both side with decorative choice lamination as in cupboard door shutter complete all as specified and directed.

S & F in repair CP grating doom 125mm dia complete all as specified and directed.

S&F in repairs 32mm dia PVC waste pipe approx 900mm long for sink/WHB complete all as specified and directed.

Supply only integral water proofing compound, complete all as specified and directed.

M & L for applying two layer pedicrete mixed with cement on brick/ concrete/ plastered surfaces of roofs/walls as per manufacturer's instructions complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping, complete all as specified and directed.

S & F in repairs brass spindles for jaquar/Marc fittings for bib taps/stop cock/angle valve/mixers/basin mixture etc. complete all as specified and directed.

M/S Reliance Construction

QUALITY CONSTRUCTIONS CO

M/s Sachkhand Traders

R P construction company

M/s SNS Construction