Widening of Fatehpur Bahuwa Hinauta Road (SH-170) in Ch-45.550 to 58.850

Amount

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 meters including removal and disposal of top organic soil not exceeding 150 mm in thickness. as per MORT&H specification clause no 201. GST shall be paid extra as applicable at the time of payment.

Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m. as per MORT&H specification clause no 301. GST shall be paid extra as applicable at the time of payment.

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2. (Mechanically compaction only). as per MORT&H specification clause no 305 (3.17). GST shall be paid extra as applicable at the time of payment.

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2. as per MORT&H specification clause no 305 (3.18). GST shall be paid extra as applicable at the time of payment.

Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401. GST shall be paid extra as applicable at the time of payment.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieved the desired density. as per MORT&H specification clause no 406. GST shall be paid extra as applicable at the time of payment.

Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means. as per MORT&H specification clause no 502. GST shall be paid extra as applicable at the time of payment.

Providing and laying dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.50 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 507 complete in all respects. GST shall be paid extra as applicable at the time of payment.

Providing and applying tack coat with bitumen VG-10 using bitumen pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. as per MORT&H specification clause no 503. GST shall be paid extra as applicable at the time of payment.

Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects. GST shall be paid extra as applicable at the time of payment.

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. as per MORT&H specifications Clause 304. GST shall be paid extra as applicable at the time of payment.

Plain cement concrete mix 1:3:6 C:CS:crushed stone aggregate 40 mm nominal size , placed in foundation and compacted by vibration including curing for 14 days as per Technical Specification Clause802,803,1202,1203 GST shall be paid extra as applicable at the time of payment.

Providing and laying reinforced cement concrete M 20 grade in superstructure as per drawing and technical specifications clauses 800, 1205.4 and 1205.5 GST shall be paid extra as applicable at the time of payment.

Supplying, Fixing, and placing HYSD bar reinforcement in superstructure as per drawing and technical specifications Clause 1002,1010,1202 @ 0.9% of R.C.C. Work. GST shall be paid extra as applicable at the time of payment.

Providing & Laying reinforced concrete pipe NP3 for culvert on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 (1 cement : 2 coarse sand) for 900 mm dia NP3 .GST shall be paid extra as applicable at the time of payment.

Providing & Laying reinforced concrete pipe NP3 for culvert on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 (1 cement : 2 coarse sand) for 600 mm dia NP3 .GST shall be paid extra as applicable at the time of payment.

Providing & Laying reinforced concrete pipe NP3 for culvert on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 (1 cement : 2 coarse sand) for 350 mm dia NP3 .GST shall be paid extra as applicable at the time of payment.

Brick masonry work in cement mortar (1:3 (1 cement : 3 sand)) in sub structure complete excepting pointing and plastering, as per drawing and specification clause 602,603,604 and 1204. GST shall be paid extra as applicable at the time of payment.

Pointing with cement mortar (1:3 ) on brick work in substructure as per Technical Specifications as per Sl No-13.02. GST shall be paid extra as applicable at the time of payment.

Plastering with cement mortar (1:3 ) on brick work in sub-structure as per Technical Specifications as per Sl No-13.03. GST shall be paid extra as applicable at the time of payment.

M/S SANJAY ENTERRPRISES

M/s S Kumar Enterprises

Shivam Construction And Suppliers

M/S MATGAJENDRANATH CONSTRUCTION