Installation of Khagenhat-IIMini Solar RLI scheme by Supply and Installation of Solar PV system with dual axis Manual Tracking system, centrifugal pump sets, Distribution Chamber and construction of spout chamber on Turn Key basis in Alipurduar dist.

Amount

Supply of U.P.V.C Pipes and fittings

140 mm. dia P.V.C. pipe Class- I 140(with a loose matching coupler,class-II) marking IS No. 4985/ 1988 with latest amendments with free solvent cement.

110 mm. dia P.V.C. pipe Class- I (with a loose matching coupler,class-II) marking IS No. 4985/ 1988 with latest amendments with free solvent cement.

110 mm. dia P.V.C. pipe class-II ( with a loose matching coupler,class-II) marking IS No. 4985/ 1988 with latest amending with free solvent cement.

Coupler(Cl-II) for 140 mm. dia P.V.C. pipe ( extra) I.S. 10124/1988, Part- II with free solvent cement.

Coupler(Cl-II) for 110 mm. dia P.V.C. pipe ( extra) I.S. 10124/1988, Part- II with free solvent cement.

110x110x 110 M. P.V.C. Tee with free solvent cement

140x140x 140 M. P.V.C. Tee with free solvent cement

140 x 110 Reducer(cl-II) with free solvent cement.

140 mm. dia 900 bend (cl-II) ( IS. No. 10124/ 88 Part- 8 with latest amendment )

110 mm. dia 600 bend(cl-II) ( IS. No. 10124/ 88 Part- 8 with latest amendment )

110 mm. dia 900 bend(cl-II) ( IS. No. 10124/ 88 Part- 8 with latest amendment )

140 mm. dia IS. NO. 10124/ 88 Part- 4 with latest amendment End cap.

110 mm.dia IS.NO.10124/88 Part-4 with latest amendment.PVC End Cap.(Cl-III)

110 mm. dia ( IS. No 10124/88 Part- 6 with latest amendment) F.T.P.(Cl-II)

140 mm. dia ( IS. No 10124/88 Part- 6 with latest amendment) F.T.P.(Cl-II)

ISI marked P.V.C.Flexible Hose pipe as per IS 15265 - 100 mm dia

Solvent cement extra (Medium duty)

Supply of M.S, G.I, E.R.W pipes, fiitings, accessories & Miscellaneous materials

G.I. Tripod Set and Inlet & Outlet Pipe Fittings (As per drawing)

100 mm dia G.I E.R.W. Pipe with flange as per IS 1239 (Part-I)/2004 & 6392/1971, table 17 Specification.

150 mm. dia I.S.I. 14846/2000 Amd No. 1&2 mark and specification PN- 1.6 sluice valve .

100 mm dia C.I. Sluice Valve I.S.I. 14846/2000 Amd No. 1&2 mark and specification PN- 1.6 sluice valve .

Ф100 mm NTP /Alfa-Alfa Valve as per technical specification

100 mm dia 90º G.I bend (With priming arrangement) ISI 1239 (Part-II)/1992 Specification mark

100 mm dia. Foot Valve Threaded type IS: 4038/1986

100 mm dia, 2mm thickness,30mm width Heavy Duty Hose Clamp fitted with bolts & nuts

100 mm dia C.I Tail piece one End flanged other End Grooved

100 mm dia C.I. combind Tail Piece with adopter both side grooved

80X65mm M.S. flanged reducer

100X80mm M.S. flanged reducer

M.S Foundation Bolt for Pump motor sets (1.1kg each)

M.S Foundation Bolt for distribution chamber (1.1kg each)

Nuts & Bolts IS: 1363 (Part 1 & 3) /1992 of Product Grade-C. M 20x80 mm.

Nuts & Bolts IS: 1363 (Part 1 & 3) /1992 of Product Grade-C. M 20x100 mm.

Nuts & Bolts IS: 1363 (Part 1 & 3) /1992 of Product Grade-C. M.16x65 mm

Nuts & Bolts IS: 1363 (Part 1 & 3) /1992 of Product Grade-C. M 16x80 mm

Nuts & Bolts IS: 1363 (Part 1 & 3) /1992 of Product Grade-C. M 16x 50 mm

Foot valve leather washer 100mm dia

Sal Sleeper (4ft X 6in X 4 in)

Compresed Asbestos fibre jointing for Quadruped & Tripod set( for raised surface of Flange as per IS-6392) 300mm.dia(Table-5)

Rubber Insertion I.S. 638/79 with latest amendment sheet 5 mm. 2 Ply. ( for raised surface of Flange as per IS-6392) 150 m dia Ruber Insertion(Table-17)

Rubber Insertion I.S. 638/79 with latest amendment sheet 5 mm. 2 Ply. ( for raised surface of Flange as per IS-6392) 150 m dia Ruber Insertion(Table-5)

Rubber Insertion I.S. 638/79 with latest amendment sheet 5 mm. 2 Ply. ( for raised surface of Flange as per IS-6392) 100 m dia Ruber Insertion(Table-17)

Rubber Insertion I.S. 638/79 with latest amendment sheet 5 mm. 2 Ply. ( for raised surface of Flange as per IS-6392) 80 m dia Ruber Insertion (Table-17)

3C X 4 sqmm copper cable conforming to IS 694 [Busbar to 32 A, TP Main switch and 32 A TP switch to Motor starter]

2 X 3C X 2.5 sqmm copper cable conforming to IS 694 in 25 mm GI conduit (ISI-Medium quality)[ Star-Delta Motor starter to Motor]

Supply and Installation of Solar Module & Solar Controller

Solar Module: Supply, transport, installation and commissioning of lSI marked as per IS 14286 and ire 61853(1). 61730(1&2), 61710 certified Solar Module of Multi crysta lin elM a nocrvs tilIIine/ Monocrystalline PERC/bifacial cell with min. efficiency of 15% and fill factor more than 70%, laminated between sheet of -Ethylene Vinyl Acetate (EVA) and high transmissivity .3.2/1•.1: r-un tempered glass, framed in anodized aluminium frame .The power output of individual PV modules used in the PV array, under STC, should be a minimum of 300 Watt peak, with adequate provision for measurement tolerances.Modules supplied with the SPV system should have warranty for output wattage, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. Necessary test certificate also to be supplied. For 5 HP Off-grid Solar Water Pumping System with Multicrystalline SPV modules - 5525 Wp.

Power conditioning unit with IP54 enclosure: Supply, transport, installation and commissioning of IP 54 protected enclosured Inverter Unit qualifying IEC 61683-Efficiency measurement and IEC 60068-2-Environment Standard safety standard suitable for 3 Phase A.C. motor, IGBT based high voltage switching inverter with MPPT technology, to take care of the variation of Sun light and will be suitably mounted inside the metal enclosure. Inverter should have protection against Dry run, Over current, Under current, Over voltage, Under voltage, Short circuit etc. System should be able to run at low sunshine and minimum 7 to 8 hours a day run should be possible during normal sunshine. condition. Inverter should have option to auto start for any short trip off due to low light/ cloudy situation except for dry run. Inverter should be provided with a display to show the various parameter by the user such as Voltage, Current, Solar panel DC voltage, Inverter IGBT temperature, Out put AC voltage, Output frequency, Pump flow (direct or calculated method), Irradiation etc. The system should store the data at a set interval, be capable to transfer it to external storage device and support communication of its operational parameters and logs over Modbus protocol It should also monitor and save total run time, total water pumped etc. There should be provision for interfacing GPRSbased data transmission. For 5 HP capacity Pump-motor set

Rate from Percentage BOQ (BOQ2)

GST on Basic Cost @ 5%

GST on Basic Cost @ 12%

GST on Basic Cost @ 18%

Labour Welfare Cess @ 1%

Bidder Name

Amount

STANDARD INDST ENGINEERS CO OPERATIVE SOCY LTD(GSTN-19AABAS7249D1ZD)

BOSE ENTERPRISE(GSTN-19AAGFB3702Q1Z6)

SCEC BOENTER KDAS JOINT VENTURE(GSTN-19ACHFS2533H1Z0)

STANDARD INDST ENGINEERS CO OPERATIVE SOCY LTD

BOSE ENTERPRISE

STANDARD INDST ENGINEERS CO OPERATIVE SOCY LTD

BOSE ENTERPRISE