REPAIR OF DRAIN, FENCING BOUNDARY WALL AND OTHER MISC WORK UNDER AOR OF AGE BR-II AT GE (EAST) MATHURA

Amount

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded in natural ground/ PCC/ Brick work and making good disturbed area complete all as specified and directed.

Dismantling galvanised barbed wire fencing any size, complete all as specified and directed.

Excavation in post holes (or similar holes ) each n exc 0.5 cu m getteing out as soft /loose soil rerurning filling in and ramming earth or broken rubble mixed with earth around in layer not exceeding 25 cm complete all as specified and directed.

M&L for PCC 1;3:6 type C-2 using 40 mm graded stone crushed aggregate as in foundation & mass concrete etc complete all as specified and directed.

S&F Mild steel work wind ties, posts and struts in fencing incl cutting tops to shape as required, drilling holes , noching for wire , flat iron fillets for securing wiremesh etc., incl all necessary drilling, bolting or riveting etc & similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F Mild steel screw bolts (machine made) dia of neck 5 to 10 mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed

S&F mild steel round bars 10mm dia cut to length, bent to shape as required and fixed in fencing confirming to Fe 410-Wor Fe 290 complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

supply only MS galvanised chain link any size of mesh as in fencing with complete all as specified and directed.

S&F galvanised 2 strand steel barbed wire 2.0 mm, dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provn of galvanised mild steel wire staples or steel pins all as directed. (Each line wire to be measured) complete all as specified and directed.

M&L for Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic paint over and including one coat of red oxide primer complete all as specified and directed.

M&L for Preparing new steel surfaces of any description .n. exc 10 cm width or girth and applying two coats of synthetic paint over and including one coat of red oxide primer complete all as specified and directed.

S&F Concertaina coil 450 mm dia in (stretched position) with 2.50 mm dia high tensile strength wire fixing to Y-shaped angle iron posts securing with necessary clips on top of boundary wall complete all as specified and directed.

Excavating over area , n exc 1.5 m in depth; for drain ,culvert etc and getting out in soft/loose soil. In existing strom nahla /drain complete all as specified and directed.

Demolition of Brick work or stone/boulder masonary, from strom nhala buit in cement mortor or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in surface channels and drains complete all as specified and directed.

M&L for Brickwork with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L for Brickwork (obtained for demolition ) with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L for providing PCC type B1 1:2:4 using 20mm graded aggregate as in coping,bencing ,hauncing etc complete all as specified and directed.

M&L rendering 15mm thick in cement mortar (1:4) on brick work surfaces finishing the surfaces even and fair complete all as specified and directed.

Removing excavated soil to a distance exc 250 m but n exc 500 m and depositing where directed at a level of n.exc 1.5 m above the starting point complete all as specified and directed.

Formwork to sides and soffits of suspended slabs such as roof slabs, floor slabs,, landings and similar works, not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

Formwork to edges of concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC Slabs for sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.

M&L Reinforced cement concrete 1:1.5:3 type A1 using 20mm graded stone aggregate as in slabs of drains/culvert , complete all as specified and directed. Note: - Reinforcement shall be measured and paid for separately.

M&L for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips for cover slab complete all as specified and directedd.

Returning, filling in, in-cluding spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Cleaning of existing mud semi solid/solid material etc from strom drain of size n.exc 1.0 sqm complete all as specified and directed.

M&L for 110 mm dia PVC (SWR) pipe fixed in Bricks masonry as weep holes complete all as specified and directed.

Demolition and breaking up 300 mm internal dia drain pipe ( reinforced cement concrete) set in cement mortar including cement concrete bedding and haunching and removing the demolished material out of MoD land complete all as specified and directed.

MAHTAB ALAM (BID ID -3258811)

RANA CONSTRUCTION (BID ID -3261089)

M/s Orient Traders (BID ID -3260844)

M/S CHAUDHARY CONSTRUCTION (BID ID -3266504)

Deepak Saxena (BID ID -3260674)