Up-gradation of BBCI kitchen

Amount

Civil Works

Dismantling tile work in floors and roofs laid in cement mortar includingstacking material within 50 metres lead.

For thickness of tiles above 25 mm and up to 40 mm

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

Of area 3 sq. metres and below

Of area beyond 3 sq. metres

Finishing

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.

Cement mortar 1:4 (1 cement :4 coarse sand)

CEMENT PLASTERING:Cement plastering for internal wall and ceiling with cement mortar 1:4 finished smooth with neeru over brick walls or concrete surfaces including hacking the concrete surfaces at all floors and levels in quantities as required at site Including scaffolding curing etc. complete all as directed by Engineer in charge ( disposing / taking away the debris outside the premises & disposing as per the guidlines of statutory authoritised. )

12 mm thick for wall

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of stepsand dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Area of slab upto 0.50 sqm

REMOVING OLD FITTINGS:Removing existing rusted damaged / defective flush tank wash basin / urinals / sinks / E.W.C. and I.W.C. etc. all internal fitting either new or retaining existing arrangements etc. complete all as directed by the engineer in charge.

REMOVING G.I. PIPE : Labour charges only for removing C.I. / G.I. pipes for any size with all fittings etc. complete as and when required and as directed by the engineer in charge.

Removing G.I. pipe any dia

P.V.C. PIPES: Drain Line - Providing, laying, jointing, fitting testing heavy quality PVC pipes of Prince, Supreme etc. make & of required dia including all fittings required as per site requirement & laying the same at any floor levels including scaffolding all jointing materials & clamping in wooden blocks if required etc. complete as directed & specified by engineer in charge.

Providing, laying, jointing, fitting & testing CPVC pipe SDR of heavy quality following dia for hot & cold water distribution system of approved make (Prince, finolex, Supreme, make) including all fittings required as per site requirement for concealed pipe laying by chasing in wall, floors and making good the same to the original condition and for open type of pipe laying and fixing in proper line & level with necessary PVC clamps wood packing etc. fixing the joints with proper solvent or threaded type fittings or press type fittings to make totally water proof joint with necessary testing etc. complete all as per specified and directed by Engineer in Charge. (work includes removing old fixtures also)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

Cement mortar 1:6 (1 cement : 6 coarse sand)

Market Rate

Providing and fixing in position aluminium openable window shutter with frame fully glazed / aluminium grills with using 5.5mm thick glass sheet of approved make and quality plain / frusted / bajari glass of approved make Triveni / Shri Vallabh /J / A/ G/ pilkinten fixed with aluminium beeding channels with two way rubber gasket / PVC lining to ensure water tightness and no rattling for aluminium grill fixing with F channel beeding using satin finish anodized 15 micron jindal approved havey duty sections for shutters and frame of required size and sections including using aluminium / S.S. hinges of required size of Archies make, tower bolt of required size of Archies make , C type aluminium handle for shutter of Archies make and other necessary hardware as per requirement etc. complete all as per specified and directed by Engineer in charge..(including mosquito net shutter)

Alumn. Sliding window with powder coated

Providing and fixing 40mmx40mm heavy duty Aluminium angles/S.S. angles of 16 gauge at the corner edges of walls, columns or wherever required including scrapping for fixing the same if required etc. including cost of other materials such as screws, rawal plug etc. complete labour etc. as required at site all complete as specified and directed.

S.S Angles (2mm) 50 x 50mm thick

Square bar 20 x 20 to be provided welded in built up sections/ framed work, including cutting, hoisting, fixing in position as required.

In gratings and similar works

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main"T" runners to be suspended from ceiling using GI slotted cleats ofsize 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanisedbutterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mmcenter to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete forall heights as per specifications, drawings and as directed byEngineer-in-charge

GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.

Painting

White washing with lime to give an even shade :

Old work (two or more coats)

Providing&applying one/two coats of primer two coats of paint as mentioned below of approved make First quality sian Paints(Apcolite) / Nerolac/ Dulux to the required colour scheme and as per manufacturers instructions/specifications to the walls, beams, columns, ceilings, partitions ,doors etc. including removing existing paints, nails ,screws, battens etc. and thoroughly scrapping the surface withs and papers filling up crevices and levelling with putty of Asian make necessary to obtain smooth surface ie.complete surface preparation etc.complete as directed to the entire satisfaction of Engineer In-charge.

With two coats of primer and two coats of paint

Using Luster paint

Using synthetic enamel paint (Oil Paint)

Carpentry

Removal of old formica along with the adhesive making the surface smooth and providing and fixing new approved of required specification and colour etc. complete as specified and directed including fevicol, nails etc. complete.

1.00 mm thick

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :

Kitchen sink without drain board

610x510 mm bowl depth 200 mm

GRANITE: Providing and laying 18-20mm thick granite slab in required size and approved colour as per approved sample 1st quality for lift architraves / dado / flooring / sills / jams/platform / sink / with all exposed edges machine cut double machine polished (mirror polish) laid over a bedding of cement mortar 1:3, 35mm thick in true plain curing finishing the joints making holes for wash basin / sinks coupling in slab if required etc. complete including making grooves in walls for fixing and making good the surface (excluding cuddapah platform) colours – Black/Red/Grey. ( disposing / taking away the debris outside the premises & disposing as per the guidlines of statutory authoritised. )

CUDDAPAH :Providing & laying 25-30mm thick cuddapah stone slabs in platforms / sinks with all exposed edges machine cut double machine polished in true plane and level with matching cement paste curing finishing the joints neat etc. complete including making grooves in walls for fixing and making good the surfaces. ( disposing / taking away the debris outside the premises & disposing as per the guidlines of statutory authoritised. )

Providing / Fabricating, fixing SS table (grade 304, 14 guage) of required size along with all ncessary accessories i.e undershelves, backlash, caster wheel etc. as directed by engineer incharge. As per drawing

Providing & fixing C.P. Long body bib tap Seiko Make etc. complete.

GULLY TRAP ;Providing & fixing in position best glazed stone ware gully trap with 150x150mm sq. inlet and 100mm n.b. outlet conforming to IS 651 including embedding the trap in 1:4:8 Cement concrete 150mm x 150mm GI grating at top, construction of brick masonry chammber 300mm x 300mm (internal) in 230mm thick brick masonry embedding the trap plastering with cement mortar 1:4 20mm thick on inside and all exposed faces finished with a floating coat of neat cement, providing & fixing CI frame and hinged cover weighing not less then 7 Kgs painting the grating frame and cover with 2 coats of approved bitumastic paint etc. complete

INSPECTION CHAMBER :Providing & making inspection chamber of size 0.90 mtrs x 0.450 mtrs internally of required depth as per requirement including excavation of soil P.C.C. 1:4:8 bedding for base 230mm thick brick work for inspection chamber in 1:6 prop. Cement mortar plastering to be done by water proof plaster in 1:4 proportion & finishing all sides base with neat cement by using water proofing compound from both sides including drain line in chamber for frequent water / drainage flow with required gradient etc. complete as specified & directed by engineer in charge .(work includes removing old fixtures also)

0.6m x 0.6m x 0.9m

WATER PROOF PLASTER:Cement plastering for internal walls 20mm thick in two coats backing coat 15mm thick in cement mortar supplying 1:4 second coat 5mm thick in cement motar 1:4 and finished with neat cement finish / over brick or concrete surfaces at all floors and levels in quantities adding water proofing compound of 2% by weight of cement as required at site including hacking of concrete surfaces scaffolding curing etc complete all as directed by engineer charge. (General used in drain line, chambers etc.) ( disposing / taking away the debris outside the premises & disposing as per the guidlines of statutory authoritised. )

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

25 mm thick

Kota stone slabs 20 mm thick in risers of steps, skirting, dado, drains and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

Providing and fixing alumimium partition to the required height partly glazed and partly panneled or fully glazed or fully panneled using aluminium section ofapproved make heavy quality section 3" x1½ " / or of various section lesser than mentioned size as approved by EIC. The Aluminium section shall be of Satin finish anodizing of required size for bottom, top, middle and vertical rails at required intervals panneling with 12mm thick nova pan or ancholam both side pre-laminatd board fixed with sloping aluminium beeding alround with neoprine gasket glazing with 5.5mm forsted/ bajri/ plain glass of approved make like M/s.Triveni, Shri.Vallabh/J/A/G pilkinten fixed with alumimium channel beeding two way PVC lining/ rubber gasket to ensure water tightness and no rattaling including providing necessary cover mould using suitable alumimium section so as to take care of gaps between the walls/ ceiling / flooring and partitions etc. including providing and fixing necessary fittings as specified and directed.

With powder coated partitions

Fully panneled

Providing and fixing ordinary plain/frosted/Bajra self design sheet glass of approved make of following thickness in various sizes as required at site fixed to windows/louvers, partitions, vision panels door etc. using first class oil putty of approved quality and make including labour charges for fixing glazing pins teakwood or aluminium beeding with necessary screws nails etc. at all floors and locations including cutting the glass to required size removing the existing broken/damaged glass panel window/doors/partitions etc. along with its old oil putty beeding etc. and disposing off the unsericeable material including wastage in cutting, transportatiion etc. complete. all as directed by the Engineer-In-Charge.

5mm thick

Providing making and supplying computer table made out fo 19mm commercial ply for table top, mounted on the vertical side fo 19mm commercial ply and cabinet made out of 19mm commercial ply for sides, shelves and shutters making concealed monitor arrangement by providing 8mm thick clear glass on table top of required size with edge polish as shown in drawing drawer and wooden approved key board drawer with heavy sliding channels, with handle for shutter,cable manager drawers all edges shall be lipped with 6mm thick T.W. lipping patti. All exposed faces should be 1.0mm thick laminate of approved colour and non laminated area should be french poll-shed including cost of other materials labour etc. as per drawing and as specified and directed by Engineer-In-Charge.

Computer table with all inner surface with 0.8 mm thick approved laminate

Providing fixing door frame and shutter side hung to consist of partly glazed partly panneled/ fully panneled/ fully glazed with 5.5mm thick glass sheet of approved make and quality plain or frosted of bajri glass of approved make like M/s. Triveni/Shri Vallabhj/J//A/G pilkinten fixed with two way PVC lining/rubber gasket to ensure notes tightness and no rattaling and panneling with 12mm thick nova pan or Ancholam finished on both side as required using extruded alumimium section for shutter frame jindal 2425 45 45mm satin finish anodized including P/F push-pull plates handles and of approved make and heavy duty fittings like tower bolts of Archies/Everite make Motice lock of Laxmi/Gold locks with keys hinges of 5 inch or 6 inch as per requirement hydraulic door closer/ floor spring of Henco/Hyper/Everite make of suitable capacity etc. complete as specified and directed.

With powder coated

Providing and fixing in position/flush door of shutters block board solid core internally lipped bonded with water proof type synthetic resin hot pressed with marine ply finished on both faces including prov. And fixing teak wood lipping on all sides with making necessary vision pannel of required size by using 4mm thick plain or frosted glass with T-W lipping patti all around ,fixing heavy duty approved make 4 levers mortice lock of deco with pair of handle of approvd make and quality brass/S.S. fittings such as hinges, tower bolts, of approved make fixing fixtures locking arrangements with screws etc. applying one coat of approved wood primer etc. all complete as specified and directed by Engineer-In-Charge.

Door shutters with locking arrangement 4 lever mortice lock with handle set of approved make.

25mm thick

FANCY STOP COCK: Providing 15mm dia C.P. brass fancy stop cock weighing not less than 600gm of approved make and conforming to IS 781-1977 and fixing with pipe line including cost of jointing materials and testing the joint hydraulically to a pressure of 10 kg / CM2 and rectifying the leaky joints if any complete as specified and directed. (SEIKO make)(work includes removing old fitting and fixtures and handing over the same.)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

Second class teak wood

FANCY FITTINTGS : Providing 15mm dia C.P. brass fancy fittings weighing not less than 600gm RMC approved make (latest) and conforming to IS 781-1977 and fixing with pipe line including cost of jointing materials and pressure of 10 kg / CM2 and rectifying the leaky joints if any complete as specified & directed for the following. (work includes removing old fitting and fixtures and handing over the same.)

Bib tap fancy (SEIKO )

Fancy angle stop cock SEIKO make

Fancy stop cock (concealed type) with wall flange Plumber/ Jaquar make ( cat No.87)

Dismantling tile work in floors, walls and roofs laid in cement mortar includingstacking material within 50 metres lead.

For thickness of tiles 10 mm to 25 mm

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

Of area 3 sq. metres and below

CEMENT PLASTERING:Cement plastering for internal wall and ceiling with cement mortar 1:4 finished smooth with neeru over brick walls or concrete surfaces including hacking the concrete surfaces at all floors and levels in quantities as required at site Including scaffolding curing etc. complete all as directed by Engineer in charge ( disposing / taking away the debris outside the premises & disposing as per the guidlines of statutory authoritised. )

12 mm thick for wall

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers, dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

NAHANI TRAP:Providing and fixing 100mm dia CI heavy duty Nahani trap with brass C.P. dome type heavy duty jali all as approved make quality as specified and directed and with all necessary allied works. a) In sinks on way / two ways lead covered joints P.C.C. encasing with C.P. Jali 4” to 5”

Providing and fixing bacalite of approved shade / make sheet door shutter with frame (aluminium ) required size and of approved colour frame made out from Rectangular / H / A section of 14 gauge 15 micron anodized / powder coated 20mm x 40mm zindal section with aluminium hinges / SS hinges, handles / knob /aldrop tower bolt / all locking arrangement etc. all as per specification and directed by the engineer in charge.

Single leaf shutter with powder coated aluminium frame (Heavy duty)

Ball Valve TBS make

FANCY STOP COCK: Providing 15mm dia C.P. brass fancy stop cock weighing not less than 600gm of approved make and conforming to IS 781-1977 and fixing with pipe line including cost of jointing materials and testing the joint hydraulically to a pressure of 10 kg / CM2 and rectifying the leaky joints if any complete as specified and directed. (SEIKO make)(work includes removing old fitting and fixtures and handing over the same.)

FANCY FITTINTGS : Providing 15mm dia C.P. brass fancy fittings weighing not less than 600gm RMC approved make (latest) and conforming to IS 781-1977 and fixing with pipe line including cost of jointing materials and pressure of 10 kg / CM2 and rectifying the leaky joints if any complete as specified & directed for the following. (work includes removing old fitting and fixtures and handing over the same.)

Bib tap fancy (SEIKO )

Fancy angle stop cock SEIKO make

Fancy stop cock (concealed type) with wall flange Plumber/ Jaquar make ( cat No.87)

WASH BASIN : Providing & fixing best quality wash basin of approved colour & size with following items as specified.Providing & fixing white / colour glazed vitreous china ware wash basin of make Hindware with semi punched tap holes for fixing the tap in different position in the basin, mounting the set over a suitable C.I. bracket etc. as approved by & Fixing 32mm size C.P. / PVC brass/ a bottle trap with extension piece wall flanges (heavy quality) jointing with white Zinc & Spun yarn & fixing 15mm dia PVC water inlet connection of required length with C.P. brass unions at end & fixing 32mm dia C.P brass heavy quality waste coupling with C.P. brass ball chain & rubber plug & fixing 15mm C.P brass fancy stop cock including cost of jointing materials etc. as per requirement & Fixing C.P. brass 15mm dia fancy pillar tap or approved pillar tap of make,BMC approved including cost of jointing materials etc. Testing the entire system to the full satisfaction of the engineer in charge wash basin model No.10001/10004 of hindware. Parryware/Cera

WHITE COLOUR

630mm x 450mm

MIRROR ;Providing and fixing in position bevelled or plain edge mirror / ghost free image made out of best Indian glass 5.5mm thick of approved make, copper coated with approved colour PVC frame with wall mounting arrangements washers rawl plugs etc. complete of following sizes and as directed by the engineer in charge.(work includes removing old fixtures also)

600mm x 450mm

SOAP DISPENSER :Providing C.P. brass heavy quality liquid soap dispense C.P. push type brass brackets caps etc. and fixing in position with brass screws including providing and fixing rawl plugs in the wall and redoing the walls etc. all complete.(Jaquar /Plumber make) (work includes removing old fixtures also)

REMOVING OLD FITTINGS:Removing existing rusted damaged / defective flush tank wash basin / urinals / sinks / E.W.C. and I.W.C. etc. all internal fitting either new or retaining existing arrangements etc. complete all as directed by the engineer in charge.

REMOVING G.I. PIPE : Labour charges only for removing C.I. / G.I. pipes for any size with all fittings etc. complete as and when required and as directed by the engineer in charge.

Removing G.I. pipe any dia

P.V.C. PIPES: Drain Line - Providing, laying, jointing, fitting testing heavy quality PVC pipes of Prince, Supreme etc. make & of required dia including all fittings required as per site requirement & laying the same at any floor levels including scaffolding all jointing materials & clamping in wooden blocks if required etc. complete as directed & specified by engineer in charge.

Providing, laying, jointing, fitting & testing CPVC pipe SDR of heavy quality following dia for hot & cold water distribution system of approved make (Prince, finolex, Supreme, make) including all fittings required as per site requirement for concealed pipe laying by chasing in wall, floors and making good the same to the original condition and for open type of pipe laying and fixing in proper line & level with necessary PVC clamps wood packing etc. fixing the joints with proper solvent or threaded type fittings or press type fittings to make totally water proof joint with necessary testing etc. complete all as per specified and directed by Engineer in Charge. (work includes removing old fixtures also)

PLASTER BREAKING :Labour charges only for removing existing damaged / cracked / loosened cement / neeru / rough casts and faced plaster or tile work with back coat at all floors and levels including cleaning the surfaces clear of all loose concrete/ mortar foreign materials, carting away the debris out of hospital premises including scaffolding raking out joints of brick / stone masonry haking concrete surfaces etc. complete with quantities to be executed as and when required and as directed by the engineer in charge. ( disposing / taking away the debris outside the premises & disposing as per the guidlines of statutory authoritised. )

WATER PROOF PLASTER:Cement plastering for internal walls 20mm thick in two coats backing coat 15mm thick in cement mortar supplying 1:4 second coat 5mm thick in cement motar 1:4 and finished with neat cement finish / over brick or concrete surfaces at all floors and levels in quantities adding water proofing compound of 2% by weight of cement as required at site including hacking of concrete surfaces scaffolding curing etc complete all as directed by engineer charge. (General used in drain line, chambers etc.) ( disposing / taking away the debris outside the premises & disposing as per the guidlines of statutory authoritised. )

CORRUGATED A.C. / G.I. SHEET: Providing & fixing absestos cement sheet / GI sheet close fitted serrated adjustable corrugated / semi corrugated sheets including overlaps, ridges if required including supplying & fixing necessary J or L hook bolts, nuts or self tapping screws with necessary GI washer and bitumen washers with scaffolding etc. complete all as directed by the engineer in charge.

GI sheet roofing 22 gauge powder coating

Fancy shower assembly with mixer cock ( Plumber/ Jaquar make ) full set including c.p. shawer. & C.P converter

TOWEL ROD :Providing & fixing approved C.P. brass towel rods of size 600mm x 20mm heavy duty with a pair of C.P. brass brackets wall flanges etc. fixed to wall with C.P. screwed on the rawl plugs etc. complete as and when required and as directed by the engineer in charge.(Jaquar/Plumber make) (work includes removing old fixtures also)

Clearing jungle including uprooting of rank vegetation, grass, brush wood,trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

Cement mortar 1:4 (1 cement : 4 coarse sand)

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing

1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix :

1:3 (1 cement: 3 fine sand)

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

Electrical Works

Supply,Installation of 35Sq.mm 4core non-armoured aluminium cable cable

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Supplying and fixing 63A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Three Pole

18W LED tube light with frame,Size:4"

Item No:24/(N/S)Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCCB TPDB is normally used where 3 phase outlets are required.)

12way, Double door

Supplying and fixing following size/ modules, PVC box alongwith modular base for modular switches in recess etc. as required.

6 Module (125mmX125mm)

Supplying and fixing following size/ modules, PVC box alongwith modular base for modular switches in recess etc. as required.

12Module (125mmX125mm)

Supplying and fixing following size/ modules, PVC box alongwith modular base plate for modular switches in recess etc. as required.

8 Module (125mmX125mm)

Supplying and fixing following size/ modules, PVC box alongwith modular base plate for modular switches in recess etc. as required.

4 Module (125mmX125mm)

Supply of recess mounting 12 W LED down light with 50000 burning hours high efficient LED’s, CCT-5700-6500 K,CRI >80, Lumens ≥ 100lumen/watt, with aluminium die cast housing with opal diffuser for glare free & uniform lighting, Driver shall be of constant current type, operating temperature from -10 to +45degree celcius, power factor>0.90, rated voltage 220-240V AC working range:- 140-270 V A'c , 50 Hz +_ 5%, AC supply. Surge protection - Inbuilt 2.5KV. Complete in all respect with the entire satisfaction of Engineer-in Charge.

Supply and erection of 2.5SQ.MM Aluminium BTC wire

Supply and installation 225mm exhaust fan

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

3 pin 5/6 A socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

15/16 A switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

6 pin 15/16 A socket outlet

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

25 mm dia. ISI marked, PVC conduit

25 mm PVC bends

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.

6 Module

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.

4Module

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.

12 Module

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.

8 Module

4 pole MCCB, 125A, 36KA

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Ceiling rose, 3 pin, 5 amps ISI marked

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

2 x 1.5 sq. mm

Exhaust Duct

SITC of wall mounted / ceiling suspended canopy type kitchen exhaust fume hood in SS (202) constuction 19SWG at flow rate of 0.5 cu mtr / sec with SS (202) oil Filters to capture oil and evacuate heat smoke ,odour, steam, vapour and other contaminante generated from cooking in order to provide comforable and productive work environment for kitchen personnel. Size -72'' x 30'' x 21''

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. Make- Jindal

22Gauge GI ducting

20 Gauge GI ducting

Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc Make- Dynacraft, Cosmos, S M Sheet

Supply and Fixing of Extruded AL powder coated Linear Grill with 4 side flanges and AL Box Damper.

Supply and Fixing of Extruded AL powder coated Linear Grill with 4 side flanges without damper

S/F of canvas Piece According to Duct size.

Structural steel work : With M.S.channel, M.S.angle, M.S. plate at all levels including supplying, cutting, fabricating, welding or bolting, errecting and fixing in position including painting with a primary coat of approved steel primer, including cost of materials labour directed by engineer in charge with two coats of enamel paint. Neccessary arrangement of scaffolding to be made by vendor. Vender shall take all safety precaution while execution of work.

Painting of existing M.S. fabricated structure with one coat of Zinc Chromate & 2 coats of synthetic enamel paint.

Design and SITC of Electrical Starter Panel Counstructed out of 14 Gauge CRCA sheets with neccessary powder coating, for exhaust and fresh air fans with 1 nos. motor, with auto and manual functions potential free contacts to be provided to interlock with local emergency fire panel, Starter panel shall be Comprising of all electrical accessories for smooth operation of fan including suitable starter for the same. MCB, DOL/Star-delta Starters, O/L relay, SPP, Timer and other neccessary safety controls, Volt meter, Ampsmeter, RYB indication, ON/OFF indications, start/stop push button. Makes- Elecrical Panel - Shivam Electricals/ Arrow Engineering MCB- LT / Schneider Starter- LT/ Shneider RYB Indications - Vaishnoy/ LT On/Off Indications - Vaishnoy/ LT

SITC of 1100 V a.c. grade FRLS PVC armoured AL/CU cabling along with appropriate size of saddles,spacers complete with GI conduit in approved manner. Make- Polycab/RRK/Finolex

3 Core x 4 Sqmm CU Cable

3 Core x 2.5 Sqmm CU Cable

3 Core x 1.5 Sqmm CU Cable

4 Core x 4 Sqmm CU Cable

SITC of GI earthing of 8 SWG including end connections complete in all respect.

Cooler

SITC of 60mm thick Eco friendly PUF Panels for Cold Room of Size: - 3M x 1.7M x 3M Height with SS Outside/SS Inside Inclusive of 1No Swing type door, Tiles and PCC Kota for flooring, Two No. Ref. Unit (1Working + 1Standby), Ref Capacity: 10000 BTU, Air Curtain suitable for cold room door with mounting arrangement, 25mm thick polished kota flooring with tarfelt sheet below to avoid condensation, Digital Temperature indicator, LED Light and accessories Desired Temprature Range 2C to 8C. PUF Density 40kg/m3, Blowing Agent for PUF Cyclopentane, Lamination grade SS304, Lamination Thickness 0.5mm, , Refrigerant R-404a. Power Supply: 415 V /3 Phase/ 50Hz, Scroll type compressor and air-cooled condenser. Copper tube should be Inner Groove Type. Considered 10meter copper piping with insulation for each refrigeration unit. Drain piping with suitable size hard PVC drain piping laid in proper manner upto the nearest drain point. Size of Panel is tentative,Agency to inspect site and take actual size of Panel before manufacturing. Installation of new Cold Room Unit, Electrical connection,Suitable new PCC/RCC foundation/Modification of Existing PCC/RCC foundation with plaster, Anti vibration arrangement, Carrying out Associated Civil works, Lifting shifting,Houskeeping and Disposing all type of generated debris and scrap from TMC is deemed to be included in this item cost. The entire work shall be complete as per specifications & as per directions of Engineer-in-charge

VERSHA TECHNOTRADE PVT LTD