Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹6.7 Laccepted-aoc NO 6 4TH CROSS 1ST MAIN MOODALAPALYA BANGALORE KARNATAKA 560072 | BENGALURU URBAN | KARNATAKA | 560072 | accepted-aoc |
Tender Value
₹6.5 L
EMD Value
₹8,100
Closing Date
17 Dec 2025, 11:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Transmission Corporation Limited
Srinivas T
Providing 1 Nos of 11kV Breaker for bifurcation of Overloaded F1-Habbanakuppe IP feeder at 66/11 kV Kampalapura substation, SRS Hootagalli nodal center, TL & SS Hootagally division, KPTCL, Mysuru.-Reserved for Schedule Caste.-CALL-2
KPTCL/2025-26/SS/WORK_INDENT2531/CALL-2
KPTCL/2025-26/SS/WORK_INDENT2531/CALL-2
Reserved
Sub-Station
Two Tender Document System(Two Cover)
KPTCL CEE Transmission Zone Office Mysuru
14 documents required · 14 mandatory
The Bidder shall be registered firm as Sole Proprietorship/Partnership/Pvt Ltd Company etc
For other than proprietorship, the Bidder shall furnish the registered partnership deed and Power of Attorney
Valid Caste Certificate in support of reserved tender participation
Valid Karnataka Residential Certificate
valid Super grade Electrical Contractor License issued by the Government of Karnataka as on the date of opening of techno-commercial bid (refer 2.3 of ITT)
Even though the Tenderers meet the above criteria, they are subject to be disqualified if they have:- Made misleading or false representations in the forms, statements and attachments submitted in proof of the qualification requirements and/or- Record of poor performance such as abandoning the works, not properly completing the contract, inordinate delays in completion, litigation history, or financial failures etc. and/or- Participated in the previous Tender for the same work and had quoted unreasonably high Tender prices and could not furnish rational justification.
Bidder shall ensure that soft copies of Power of Attorney, Letter of Undertaking, No Deviation CERTIFICATE as revised in Annexure , Any other undertaking / agreement (if applicable) are to be uploaded besides submitting the Originals to the office of the Chief Engineer, Electy., Operation, KPTCL, Mysuru, after the last submission date as per 3.10(xviii) of ITT
Bidder shall ensure that soft copies of i. Letter of undertaking for Non performance ii. Letter of undertaking for Risk and Cost iii. Letter of undertaking for Litigation iv. Letter of undertaking to source the supply of equipment material from KPTCL approved Vendors only (if applicable) are uploaded besides submitting the Originals to the office of the Chief Engineer, Electy., Operation, KPTCL, Mysuru, after the last submission date as per 3.10(xviii) of ITT
Letter of undertaking to source the equipment/material for the work from the approved Vendors who meet the eligibility clauses regarding restrictions on procurement from a country which shares a land border with India (Annexure-XVI) ii. Letter of undertaking as per clause No.1.5 of Annexure-XVII iii. Letter of undertaking as per clause No.1.6 of Annexure-XVII (if applicable) are uploaded besides submitting the Originals to the office of the Chief Engineer, Electy., Operation, KPTCL, Mysuru, after the last submission date and on or before the date and time of opening of techno commercial bids.
ESI certificate
EPF Certificate
Shall upload valid GST Certificate and PAN copy
Minimum Average Annual Turnover (MAAT) of the bidder for best one(01) year out of last preceding five financial years, shall not be less than Amount Put to Tender as per 3.2(a) of std tender documents(ITT).
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under:Assessed Available Tender Capacity: (AxNx5-B)Where A-Maximum value of works executed (KPTCL & Non-KPTCL) in any one year during the last five years (updated to FY 2024-2025) taking into account the completed as well as works in progress. N-Number of years prescribed for completion of the works for which tenders are invited.B-Value, at FY 2024-2025 price level of existing commitments (KPTCL & Non-KPTCL)and on-going works (KPTCL & Non-KPTCL) to be completed during the next 1(One)year.Note:(i)The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.(ii)A self-declaration is to be uploaded by the Tenderer stating that the information with regard to assessed available tender capacity (Works on Hand) furnished are correct.
₹500
₹8,100
3 Dec 2025
3 Dec 2025
19 Dec 2025
15 Dec 2025
Providing 1 Nos of 11kV Breaker for bifurcation of Overloaded F1-Habbanakuppe IP feeder at 66/11 kV Kampalapura substation, SRS Hootagalli nodal center, TL & SS Hootagally division, KPTCL, Mysuru.-Supply
Drake conductor
Coyote conductor
RCC Pole - 9.5 Mtr Long, 350 Kg WL for Bus ODS
11kV, 400Amps Double Break GOS with H Frame for mounting GOS set (GI)
11KV 90KN disc insulator
Bolted type tension clamp for Single Drake ACSR Conductor 120 kN, 20 mm
Bolted type tension clamp for Single Coyote ACSR Conductor 70/90 kN, 16 mm
Bolted Type Suspension Clamp Single Coyote ACSR Conductor 70/90 kN, 16 mm
Fabrication, galvanising and supply of High tensile steel tower materialsfor Beam out of Channel 100 x 50 with arrangements for stringing power conductor on 11 kV side (including bolts & nuts)1B2 Stat...
Pad clamp coyote
PG Clamp for Coyote to Rabbit
C - Type Wedge Connectors Drake to coyote ACSR Conductor
C - Type Wedge Connectors Coyote to coyote ACSR Conductor
DP Structure with RCC Pole - 9 Mtr Long, 145 Kg WL, H frame for mounting GOS Set ( GI ) with 11 kV, 400 Amps Double Break GOS
9kV,10KA Lightning arrestor
Copper Earth Bond 450 mm long
Polymeric disc insulators
Grounding of equipments by providing cast iron pipe of 100 mm ID 13 mm thickness, 2.75 metres long with 2 part clamp out of G.I. Flat 50 X 6 mm continuously welded alround the pipe using cast iron wel...
a) PVC Pipe 110mm (15Mtr)
b) PVC Insulation Tapes19 mm wide and in rolls of 10 Mtrs (10Roll)
c)PVC bend and T s of different sizes (12No)
d)Base insulator
f)Supplying and fixing of heavy duty cable gl...
1.1 kV class Armoured Copper Cables :
Supply of 19 Core 2.5 Sqmm Copper Control Cable
1.1 kV class Armoured Copper Cables :
Supply of 4 Core 2.5 Sqmm Copper Control Cables for AC DC Extension to both control panels from ACDC and DCDB
1.1 kV class Armoured Copper Cables :
4 Core 6 Sq mm Copper cable
Multi Function Transducers(MFT)
As per KPTCL Std, Interface: RS-485 Daisy Chain to RTU Com port,wiring: Both 3ph 4wire, supply: self powered, Measuring range voltage: 120%, current: 120%, frequency: 4...
Input Vtg:110V DC, input indicated by LED, input range 110VDC to 140V DC, sourcing Vtg output 48VDC, No of iputs: 12, No of outputs: 8, Source current: 5mA, at output, 8way switch to be p...
Terminal Blocks (knife type)
Current Cable - 2.5 Sq-mm multistrand copper wire for CT termination
Voltage Cable - 2.5 Sq-mm multistrand copper wire for PT termination
Control Cable - 10 Copper core x 1.5sqmm
Signal Cable - 10 Copper core x 0.5sqmm
1.5 Sqmm Grey wire for interfacing of DI and DO
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the size 2.5 sqmm
C-type channel of size 50x100x50x6mm
CT TB's - 6 nos for each panel
Providing 1 Nos of 11kV Breaker for bifurcation of Overloaded F1-Habbanakuppe IP feeder at 66/11 kV Kampalapura substation, SRS Hootagalli nodal center, TL & SS Hootagally division, KPTCL, Mysuru.-Erection
Erection of 11 kV PCVCB, 500 MVA, 25kA, 1250 A feeder
Testing & Commissioning of breaker
RCC Pole - 9.5 Mtr Long, 350 Kg WL for Bus ODS
11 kV, 400 Amps Double Break GOS with H frame for mouting GOS Set ( GI )+
Busbar Formation
Main bus/cross bus (all the three phases in a segment) using Coyote-single conductors, levelling of string conductors to the required height above the equipment, including providing ...
Fabrication, galvanising and supply of High tensile steel tower materialsfor Beam out of Channel 100 x 50 with arrangements for stringing power conductor on 11 kV side (including bolts & nuts)1B2 Stat...
Base concreting 1:2:4, 650x650x150 mm
Pole concreting 1:2:4, 650x650x1700 mm
Coping 1:2:4 (as per actuals)
DP Structure with RCC Pole - 9 Mtr Long, 145 Kg WL, H frame for mounting GOS Set ( GI ) with 11 kV, 400 Amps Double Break GOS
9kV,10KA Lightning arrestor
Grounding of equipments by providing cast iron pipe of 100 mm ID 13 mm thickness, 2.75 metres long with 2 part clamp out of G.I. Flat 50 X 6 mm continuously welded alround the pipe using cast iron wel...
Grounding of equipment with 50 x 6 mm G.I. Flat and connecting equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and conne...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Charges for Removing/spreading of Jelly from work spot by Heavy Mazdoor 2 Mazdoor X 2 days ( each person at each Bay)
a) PVC Pipe 110mm (15Mtr)
b) PVC Insulation Tapes19 mm wide and in rolls of 10 Mtrs (10Roll)
c)PVC bend and T s of different sizes (12No)
d)Base insulator
f)Supplying and fixing of heavy duty cable gl...
1.1 kV class Armoured Copper Cables :
Supply of 19 Core 2.5 Sqmm Copper Control Cable
1.1 kV class Armoured Copper Cables :
Supply of 4 Core 2.5 Sqmm Copper Control Cables for AC DC Extension to both control panels from ACDC and DCDB
1.1 kV class Armoured Copper Cables :
4 Core 6 Sq mm Copper cable
Multi Function Transducers(MFT)
As per KPTCL Std, Interface: RS-485 Daisy Chain to RTU Com port,wiring: Both 3ph 4wire, supply: self powered, Measuring range voltage: 120%, current: 120%, frequency: 4...
Input Vtg:110V DC, input indicated by LED, input range 110VDC to 140V DC, sourcing Vtg output 48VDC, No of iputs: 12, No of outputs: 8, Source current: 5mA, at output, 8way switch to be p...
Control Cable - 10 Copper core x 1.5sqmm
Signal Cable - 10 Copper core x 0.5sqmm
1.5 Sqmm Grey wire for interfacing of DI and DO
Configuration of RTU and Engineering along with validation of data at SLDC
Providing 1 Nos of 11kV Breaker for bifurcation of Overloaded F1-Habbanakuppe IP feeder at 66/11 kV Kampalapura substation, SRS Hootagalli nodal center, TL & SS Hootagally division, KPTCL, Mysuru.-Civil
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Pre cast RCC Cover Slabs
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Volume II A & B.zip
Techno-Commercial Worksheet • 20.14 MB
BOQ.zip
Others - Bill of Quantity • 0.88 MB
Liquid Asset format.docx
Others - FORMAT • 0.02 MB
Tender Document Kamplapura.pdf
Tender Document • 1.99 MB
Work on Hand details format (Tender).doc
Others - others • 0.06 MB
NIT -Kamplapura.pdf
Instructions to Tenderers • 0.76 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .