GTL Div: 1. Provision of Solar Plants at Stations and Service Buildings to Neutralize Additional Connected Load for Achieving Shunya/Shunya+. 2. Provision of Remote Monitoring System for Solar Power Plants across the Division.

A- Provision of roof top solar plants on ABSS stations COPs 61961600.00 Below/P

Survey, Design, Supply, transportation, installation, testing and commissioning of 595 KWp of different capacity (20 KWp to 200 KWp ) Grid connected rooftop solar plant consisting Mono PERC - crystalline Panel, Inverter (pure sine wave), with remote monitoring system including SIM 1 with 5 years, net connectivity, fixing structure and all other accessories including Lightening Arrestor, proper earthing, Net Meter (From DISCOM), Controls and Protections, Single Phase Preventer, interconnect cables, cable trays for DC cabling , civil works, and switches all complete at stations (COP/ Buildings) as per MNRE Standards and Scope of Work with five-year AMC/ CAMC including cleaning. Any charges of electricity board to be borne by contractor regarding metering of solar power and approvals. Above/

B-Cabling and allied works over 16 Nos Amrith Bharat Scheme stations

Supply of 4 core 300 Sq.mm LT XLPE UG aluminium cable, 1100 Volts as per IS:7098/Pt.I/1988 with its latest amendment with necassary lugs and terminations complete.

Supply and laying of HDPE pipe of outer dia 110 mm, PE-80 Grade in PN-4 as per IS 4984-2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete.

Supply of 4 core 185 sq.mm XLPE insulated underground armoured aluminium cable per IS 7098(Part 1)1988 with its latest amendment with necassary lugs and terminations complete.

Supply of 4 core 120 sq.mm XLPE insulated underground armoured aluminium cable as per IS 7098 (Part 1) 1988 with its latest amendment with necassary lugs and terminations complete.

Supply of 4 core 95 sq.mm XLPE insulated underground armoured aluminium cable as per IS 7098(Part 1)1988 with its latest amendment with necassary lugs and terminations complete.

Supply of 4 core 70 sq.mm XLPE insulated underground armoured aluminium cable as per IS 7098(Part 1)1988 with its latest amendment with necassary lugs and terminations complete.

Laying of 4 core LTUG cable of size 70/95 sq.mm in the trench and connected at both the ends complete.

Laying of 4 core LTUG cable of size 120 sq.mm and above in the trench and connected at both the ends complete.

Supply and laying of 8 SWG GI wire with 40GSM Zink coated, conforming to IS:280- 2006 or latest, it is to be laid with armourd cable for earth continuity.

Supply and fixing of HDPE pipe of 90 mm outer dia of PE-100, PN6 class as per IS 4984-2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete.

Supply and fixing of HDPE pipe of outer dia 63 mm, PE-80 grade in PN-4 as per IS 4984-2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete.

Supply and fixing of HDPE pipe of 75 mm outer dia of PE-100, PN6 class as per IS 4984-2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete.

Excavation of cable trench in all types soils of size 400mm wide x 1 mtr. deep, and 13 making good of the same to its original form and shape after complete including all connected materials and works up to the satisfaction of the Engineer at Site and also as per R.B JPO no: No.2003/Tele/RCIL/I Pt.IX dated 24.06.2013 The exact route of the HT/LT cable is to be decided in consultation with Engineer in charge.

Excavation of cable trench in rocky soil of size of size 400mm wide x 1 mtr. deep, 14 and making good of the same to its original form and shape after complete including all connected materials and works up to the satisfaction of the Engineer at Site and also as per R.B JPO no: No.2003/Tele/RCIL/I Pt.IX dated 24.06.2013

Excavation of cable trench in cement concrete bed flooring by using power drill to a depth of 1.0 Mtr and a width of 0.3mtr. After laying the pipe and refilling the trench with excavated 15 earth and undertaking cement concrete bed flooring to its original shape as was prevailing earlier to the satisfaction of Railways site Engineer and also as per R.B JPO no: No.2003/Tele/RCIL/I Pt.IX dated 24.06.2013.The exact route of the HT/LT cable is to be decided in consultation with Engineer in charge.

Excavation of cable trench of size 400mm x 1 mtr deep track X-ing/Road X-ing and 16 making good of the same to its original form and shape completely including all connected materials and works to the satisfaction of Railways site Engineer and also as per R.B JPO no: No.2003/Tele/RCIL/I Pt.IX dated 24.06.2013.. .The exact route of the HT/LT cable is to be decided in consultation with Engineer in charge.

HT/LT Cable laying by horizontal boring below track etc by pushing method-Drilling 17 for horizontal bore below track by pushing method by suitable means for laying of GI pipes/ HDPE pipe etc of various sizes, the bore shall be of 200 mm dia & shall be done at a depth of 3000 mm from ground level, it also includes insertion of pipe.

Supply and Erection of Power cable route indicators with all connected materials and works as per Drawing No.DEE/CN/BZA/2001/23.

Preparation and submission of completion drawings in A3 size with all relevant details 19 and measurements of executed installations, solar panel placement, SLD, cable routings,etc. The drawings shall be submitted in 1 (Soft Copy)+ 3 (Hard Copy) duly signed by the concerned supervisor, contractor, controlling officer and to be furnished along with bills.

Supply, fixing and connecting of Cable Junction Boxes IP 55 / IP 65 with metric 20 knockouts for cable entry Cable junction boxes of model no. K 9504 of Hensel make conforming to IS:13573/92, IEC 60947-3 with its latest amendments, with necessary terminals suitable for cables upto 50 Sq.mm and all necessary accessories complete.

Supply and Installation of 150mm x 50mm x 2mm thick GI perforated cable tray with cover along with required angle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the wall / Ceiling etc. complete.

Supply, running and connecting of 4 core 16 sq.mm PVC insulated and PVC Round Sheathed, Multicore Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt conforming to IS 694 (2010) with latest amendments.

Supply, running and connecting of 4 core 25 sq.mm PVC insulated and PVC Round Sheathed, Multicore Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt conforming to IS 694 (2010) with latest amendments.

Supply, running, and connecting of 4-core 35 sq.mm PVC-insulated and PVC-round- sheathed, Multicore Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt conforming to IS 694 (2010) with latest amendments.

Supply, running and connecting of 4 core 50 sq.mm PVC insulated and PVC Round Sheathed, Multicore Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt conforming to IS 694 (2010) with latest amendments.

Supply, running and connecting of 4 core 70 sq.mm. PVC insulated and PVC Round Sheathed, Multicore Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt conforming to IS 694 (2010) with latest amendments.

Supply, running and connecting of 4 core 95 sq.mm PVC insulated and PVC Round Sheathed, Multicore Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt conforming to IS 694 (2010) with latest amendments.

Supply, Installation, Testing and commissioning of free-standing floor/Wall mounted dust and vermin proof panel of IP 65 rating for fixing of solar inverters, Solar AC & DC DB, MCCB's/MCBs & Generation meter made out of CRCA sheet, required hardware, cleaning with 7 tank process duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/ Neoprene 28 rubber gasket of not less than 3 mm thickness, separate detachable, gland plate M.S. base channel, hinged door with locking arrangement for equipment/switchgear. The thickness of sheet shall not be less than 1.6mm up to 600mm length/ width of any compartment and be 2.0mm above 600mm. The load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be fabricated from CPRI approved fabricator). Consignee Inspection.

Provision of Foundation/Platform for installation of LT panels.

Supply and installation of 400 A 4P MCCB, 50 KA, Micro processor based adjustable 30 with LSIG protection communcation capable conform to IEC 60947-2 with its latest amendments, with extended ROM , spreader links (2 sets) of model no: IHQT3FF50400 of havells or its equivalent with all required accessorires complete.

Supply and installation of 250 A 4P MCCB, 36 KA, Micro processor based adjustable with LSIG protection communcation capable conform to IEC 60947-2 or it's equivalent with extended ROM , spreader links (2 sets) of model no: IHQT2EF50250 of havells or its equivalent with all required accessorires complete.

Supply and installation of 200 A 4P MCCB, 36 KA, Micro processor based adjustable 32 with LSIG protection communcation capable conform to IEC 60947-2 or it's equivalent with extended ROM , spreader links (2 sets) of model no: IHQT2EF50200 of havells or its equivalent with all required accessorires complete.

Supply and installation of 160 A 4P MCCB, 36 KA, Micro processor based adjustable 33 with LSIG protection communcation capable conform to IEC 60947-2 or it's equivalent with extended ROM , spreader links (2 sets) of model no: IHQT2EF50160 of havells or its equivalent with all required accessorires complete.

Supply and instllation of thermal magnetic based release ; Icu = 36kA; 100A 4 Pole MCCB conform to IEC 60947-2 of model no. IHQT2EC50100 of Havells make or it's equivalent with extended ROM , spreader links (2 sets). with all required accessorires complete.

Supply and fixing of 40/50/63A 4P MCB C Curve, 10 KA capacity with necessary connections and all accessories complete.

Supply and fixing of 6A-32 A 4P MCB C Curve, 10 KA capacity with necessary connections and all accessories complete.

Supply, transportation & installation of size 450mm x 50mm x 2.0mm of Hot Dipped 37 Galvanized Iron ladder type cable trays with rungs at span of 250 mm including horizontal and vertical bends, reducers tees, cross members and other accessories complete to place on the valley gutter to provide walkway on the COP of the plaftorm for cleaning and maintenance of the solar panels.Consginee inpspection

Supply and fixing of 6mm thick ISI marked MS Chequered plate as per on above ladder cable tray to provide walkway on the COP of the plaftorm for cleaning and maintenance of the solar panels. ( Consginee Inspection)

Provision of CT coils -3 No's and Meter box from the GESCOM for Raichur load Enhancement for provion of solar plant

Supply and testing of Data management and web based smart monitoring system to monitor the solar generation and healthiness of complete system of Solar PV with all accessries comprising:- a) Supply, testing and installation of Desktop All in one, 8 GB RAM/512 SSDD, Operating 40 system-Windows 11, 13th Generation Intel Core™ i3-1315U Processor with all accessories (Lenovo Model Number : F0HN00PGIN or similar) b) Supply, testing and installation of Inkjet Printer, all-in-one (Print/Scan /Copy) Black and Colour both, 15-22 Page Per Minute, Built in Body Tank, Space saving Square shaped or latest version with all accessories (Epson L3210 or Similar). Consginee Inspection .