Loading
Loading…
Loading…
Tender Value
₹2.3 Cr
EMD Value
₹2.6 L
Closing Date
7 Jan 2026, 11:15 amClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
+ Capital Works)
Above/Below/Par
GENL
15 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less, where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited (for details correction slip no. 01 vide L. No. 2022/CE-I/CT/GCC 2022/Policy dt. 4.07.2022 to be referred.) The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.(For details pl. refer GCC April 2022 with amendment, if any)
The Bid Security shall be deposited either in cash through e-payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure VIA and shall be valid for a period of 90days beyond the bid validity period(For other details GCC april 2022 para 5 of part -I to be referred with amendment,if any)
(a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender.(For details pl. refer GCC April 2022 with amendment ,if any).
Similar Nature of works means-Electrification / Rewiring of Service or Residential building / Yard / HT / LT substation work / HT/ LT cable work / street lighting / platform or building lighting management / circulating area Lighting / Electrical overhead power supply work / Electrical pump work etc.
20 conditions · 14 needing a document upload
Documents as per the requirement of financial eligibility criteria: The tenderers shall submit requisite information as per 'Annexure-VIB' indicating Annual Contractual turnover data for the previous 3/4 years, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant / Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. In case the tenderer is other than Joint Venture (JV) firm, tenderer has to submit all the documents mentioned below, as the case may be: (a) Sole Proprietorship firm : An undertaking on suitable stamp paper to this effect clearly mentioning PAN number. (b) HUF : (i)A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (c) Partnership Firm :(i) A notarised copy of partnership Deed or Copy of Partnership deed registered with the Registrar. (ii) A notarized or registered copy Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. (iii) An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LPP in which they were/are partners/ members. Any Concealment /wrong information in regard to above shall make the ineligible or the contract shall be determined under clause 62 of the standard general conditions of contract.(e) Company registered under Companies Act-2013 : (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation(iii)A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (f) LLP (Limited Liability Partnership ) registered under LLP Act 2008: (i)A copy of LLP Agreement (ii)A copy of Certificate of Incorporation (iii)A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv)An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (g) Registered Society & Registered Trust:(i)A copy of Certificate of Registration (ii)A copy of Memorandum of Association of Society/Trust Deed (iii)A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against Society /Trust.(iv) A copy of Rules & Regulations of the Society.
(a) Sole Proprietorship firm : An undertaking on suitable stamp paper to this effect clearly mentioning PAN number.
(b) HUF : (i)A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF
(c) Partnership Firm :(i) A notarised copy of partnership Deed or Copy of Partnership deed registered with the Registrar. (ii) A notarized or registered copy Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. (iii) An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LPP in which they were/are partners/ members.
(d) Company registered under Companies Act-2013 : (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation(iii)A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company
(e) LLP (Limited Liability Partnership ) registered under LLP Act 2008: (i)A copy of LLP Agreement (ii)A copy of Certificate of Incorporation (iii)A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv)An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members.
The Tenderer shall submit copy of Goods and Services tax (GST) Registration Certificate containing GST Registration Number.
Tenderer should submit copy of PAN Card along with their tender
FOR DOCUMENT TO BE SUBMITTED BY THE TENDERER FOR TENDER ALONG WITH THE OFFER. OFFERS WITHOUT THESE DOCUMENTS WILL BE SUMMARILY REJECTED as detailed given in checklist of tender booklet attached in document.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued b y a n y Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered atleast 5 years prior to the date of opening of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
All the work is to be carried out as per tender technical specification, scope of work and special condition attached.
Any typographical error shall not be construed to be befit of the Contractor. In such cases the interpretation and decision of Sr. DEE (G)NGP shall be final and binding up on the tenderer.
Before quoting the rates the tenderer should read explanatory note and tender documents. In case of any discrepancy between description of price schedule item and explanatory note the details specified in explanatory note shall be applicable.
Prices shall be inclusive of GST. Railway shall not accept any claim for taxes/ duties/ levies & no price variation. The Contractor shall comply with all the provision pertaining to newly introduced GST tax effective from 1.7.2017 in place of service tax and VAT including extant guide line issued by Central Govt/Rly Bd's from time to time.
Electrical work for"Rehabilitation of power supply arrangement and LT overhead lines on Railways colony of Nagpur, Ajni & Amla on NGP division."
NGP-L-T-2025-T-27R16~CR
NGP-L-T-2025-T-27R16
Open
Works - General
12 Months
Nagpur, Maharashtra
₹0
₹2.6 L
7 Jan 2026
5 Dec 2025
24 Dec 2025
69 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 2,27,89,895.52 | ||
| — | 30.00 | — | — | ||
| Dismantling the existing overhead line including G.I. wires of all sizes without damaging & making the coils in suitable sizes and handing over to depot. (NGP-10, AQ-12, AMF-8) | — | — | — | 52,710.6 | |
| — | 225.00 | — | — | ||
| Cutting of Rail/Tubular/channel/Angle/Poles from ground level and handling over the same to Railway Depot. (NGP-25, AQ-200) | — | — | — | 2,82,602.25 | |
| — | 17.00 | — | — | ||
| Supply, Erection & handing over of ACSR conductor, Weasel of size:6/1/2.59 conforming to IS:398-III-1976. (Weasel) (127.7 kg/km). (NGP-8, AQ-1, AMF-8) | — | — | — | 6,20,275.26 | |
| — | 1.00 | — | — | ||
| Supply , Erection & handing over of ACSR conductor, Rabbit of size:6/1/3.35mm conforming to IS:398-II-1976. (AQ-1) | — | — | — | 68,794 | |
| — | 7000.00 | — | — | ||
| Supply,Erecting & terminating of LT, FR PVC insulated, galvanised steel formed wire armoured (strip) cable , aluminium conductor 4 Core 16 Sq. mm complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe. (NGP-1000, AQ-5000 & Amla-1000) | — | — | — | 9,82,800 | |
| — | 5000.00 | — | — | ||
| Supplying, erecting & terminating LT, FR PVC insulated, galvanised steel formed wire armoured (strip) cable, aluminium conductor ,4 Core 50 Sqmm complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe.(NGP-500, AQ-4000, AMF-500) | — | — | — | 10,45,650 | |
| — | 2000.00 | — | — | ||
| Supplying, erecting & terminating LT, FR PVC insulated, galvanised steel formed wire armoured (strip) cable, aluminium conductor, 4 Core 95 Sqmm complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe.(NGP-500 , AQ-1000, AMF-500) | — | — | — | 6,66,200 | |
| — | 4500.00 | — | — | ||
| Supply, Erecting & terminating of LT, FR PVC insulated, galvanised steel formed wire armoured (strip) cable , aluminium conductor 4 Core 120 Sq. mm complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe. (NGP-2000, AQ-2000, AMF-500) | — | — | — | 35,78,310 | |
| — | 3500.00 | — | — | ||
| Supplying, erecting & terminating LT, FR PVC insulated, galvanised steel formed wire armoured (strip) cable, aluminium conductor, 4 Core 185 Sqmm complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe. (AQ-3000, AMF-500) | — | — | — | 39,33,895 | |
| — | 23.00 | — | — | ||
| Providing & Erecting of epoxy straight through joint outdoor/indoor for LT XLPE armoured cable 70 to 95 sq. mm. cable, with necessary material.(NGP-5, AQ-8,AMF-10) | — | — | — | 96,501.56 | |
| — | 18.00 | — | — | ||
| S.E.T &C of heat shrinkable straight through UG cable joint size- 4 core 185/120 /240sq.mm (AQ-8, AMF-10) | — | — | — | 73,861.56 | |
| — | 8000.00 | — | — | ||
| Provision of trench in all kind of normal Soil to depth 40x100cm & filling the trench (After laying cable) to bring the original condition. (NGP-1500 ,AQ-5000, AMF-1500) | — | — | — | 7,51,520 | |
| — | 4500.00 | — | — | ||
| Provision of trench in hard rock/soil/road track crossing to depth 40x100cm & filling the trench (After laying to bring the original condition.(NGP-1000, AQ-3000, AMF-500) | — | — | — | 9,00,990 | |
| — | 4000.00 | — | — | ||
| Supply & Laying of DWC pipe in the cable trenches/under track /along the poles/DP structures to be provided including all connected Accessories under other sch items pipe of dia 63 mm.(NGP-500, AQ-3000, AMF-500) | — | — | — | 5,45,520 | |
| — | 5000.00 | — | — | ||
| Supply & Laying of DWC pipe in the cable trenches/under track /along the poles/DP structures to be provided including all connected Accessories under other sch items pipe of dia 160 mm.(NGP-1000, AQ-2000, AMF-2000) | — | — | — | 22,34,750 | |
| — | 3500.00 | — | — | ||
| Supply & Laying of DWC pipe in the cable trenches/under track/ along the poles/DP structures to be provided including all connected Accessories under other sch items pipe of dia 120 mm.(NGP-500 AQ-3000) | — | — | — | 10,37,155 | |
| — | 84.00 | — | — | ||
| Provision of maintenance free earthing as per RDSO specification no. RDSO/PE/SPEC/ PS/0109- 008(REV'0') complete. (NGP-4, AQ-30,AMF-50) | — | — | — | 12,93,255.6 | |
| — | 420.00 | — | — | ||
| Supply and erection of GI Flat of size 25x3 mm from earth pit with GI nut Bolt suitable size. (NGP-20, AQ-150,AMF-250) | — | — | — | 32,692.8 | |
| — | 300.00 | — | — | ||
| SETC of GI pipe for various purpose & carrying cable protection of cables with clamps made from 40x6 MS flat complete with nut bolt & washer. (As per IS -1239 (part-I) 2004)- S E of 50 mm dia (medium/B class).(NGP-50, AQ-100, AMF-150) | — | — | — | 89,220 | |
| — | 100.00 | — | — | ||
| S.E.T.C of GI pipe for various purpose & carrying cable protection of cables with clamps made from 40x6 MS flat complete with nut bolt & washer. (As per IS -1239 (part-I) 2004)- S E of 75/80 mm dia (medium/B class).(NGP-30, AQ-20 AMF-50) | — | — | — | 49,739 | |
| — | 2210.00 | — | — | ||
| SETC of overhead GI guarding wire of 8 SWG size.(2 wires with Lessing at 3 Mtrs interval for normal use and 1 Mtr interval for road crossing) (NGP-2000, AQ-200, AMF-10) | — | — | — | 20,066.8 | |
| — | 4.00 | — | — | ||
| Supplying and erecting G.I. stay set for poles, including loop insulators at inaccessible height complete with anchor plate 300 x 300 x 6 mm., straining screws, G.I. stay wire 7/8 SWG, G.l. stay rod 20 mm x 1.8 m length and pole clamps duly erected with cement concrete foundation. (NGP-4) | — | — | — | 6,042.84 | |
| — | 1150.00 | — | — | ||
| MS work for cross arm, clamp, nut bolts etc. as per site requirement. (NGP-400, AQ- 150, AMF-600) | — | — | — | 1,10,699 | |
| — | 130.00 | — | — | ||
| Supply and Erecting of Shackle Insulator Type 1 for overhead power lines with a nominal voltage up to and including 1000 V, IS 1445 (1977) with amdt., latest, Minimum failing load (in KN) - 11.5 KN for Type 1 Shackle insulator (NGP-50, AMF-80) | — | — | — | 16,874 | |
| — | 240.00 | — | — | ||
| Painting of Rail/tubular poles with one coat red oxide and second silver paint.(NGP- 40,AMF-200) | — | — | — | 1,42,276.8 | |
| — | 26.00 | — | — | ||
| SETC of feeder pillar comprising with bus bar 200A, MCCB 200A-1 No, MCCB 100 Amps-2 Nos made with 18 SWG MS sheet of size 0.5x0.5 complete with earthing and foundation etc. (NGP-1, AQ-20, AMF-5) | — | — | — | 3,90,784.68 | |
| — | 16.00 | — | — | ||
| SETC of (4-ways) MS junction box as per Railway requirement. (NGP-2, AMF-14) | — | — | — | 14,083.2 | |
| — | 1.00 | — | — | ||
| SETC of LT outdoor type distribution panel board made of 16 SWG MS sheet powder coated suitable for 400A capacity Aluminium busbar consisting with I/c, 2x400A FPMCCB with Automatic change over switch and O/g, 2x250A FPMCCB, 2x200A FP MCCB, 2x125A FP MCCB and 1x100 FP MCCB along with protection, measuring instruments and other accessories complete with fixing arrangement. ( AQ-1) | — | — | — | 3,50,000 | |
| — | 190.00 | — | — | ||
| S. E. T & C of pole mounted fibre junction box comprising with terminal bolt & with kit-kat fuse unit complete with Accessories (NGP-10, AQ-120 , Amla@45<41@ | — | — | — | 1,71,545.3 | |
| — | 190.00 | — | — | ||
| Supply & Erection of 8.5 Meters tubular pole along with base plate, Junction box and foundations etc complete.(NGP-10, AQ-120 , Amla@45<41@ | — | — | — | 19,74,043 | |
| — | 6.00 | — | — | ||
| SETC of L.As 11 KV ( Capiess type with disconnector ( AMF-6) | — | — | — | 9,232.02 | |
| — | 100.00 | — | — | ||
| SETC of Danger Board in Yard (AMF-100) | — | — | — | 7,054 | |
| — | 275.00 | — | — | ||
| SETC of 45 W LED street light fittings complete with die cast aluminium housing with heat resistant toughened glass.(NGP-15, AQ-150, AMF-110) | — | — | — | 10,64,863.25 | |
| — | 32.00 | — | — | ||
| Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose). (NGP- 12, AQ-20) | — | — | — | 1,75,888 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TenderBookletT-27R16.pdf
ATTACHMENT
AdobeScan05Dec20251.pdf
ATTACHMENT
GCCwithcorrecton.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .