MINOR REPAIR FOR WATER SUPPLY SCHEME GHANDHU KALAN BLOCK BUDHLADA DISTT MANSA (Under PRWSSIP-2A (I)) Construction of plinth protection around RCC OHSR Painting of 3.66 mtr vide steel gate with masonry pillar Painting of wicket gate Painting of Sign B

Item Wise Description :

Carriage of sand for earth filling a lead of 5 km (C.S.R. Item No. 5.2)

Earth work in excavation in foundations, trenches etc.in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation. (C.S.R. Item No. 6.6)

Earth filling :- (a) (i) Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from foundation and taken only from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres (C.S.R. Item No. 6.8)

Cement concrete 1:8:16 with Stone ballast 40mm gauge (C.S.R. Item No. 10.6 (b)

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth (C.S.R. Item No. 11.5)

Conglomerate floor 50mm thick cement conc. 1:2:4 (C.S.R. Item No. 14.7)

12.5mm thick cement plaster 1:2 (C.S.R. Item No. 15.7)

Finishing walls with exterior decorative cement based paint such as snowcem, robbiacem etc. two coats to give an even shade. (C.S.R. Item No. 16.14)

Applying priming coat with metal primer on new steel or iron work including preparation of surface. b) With ordinary quality paint (C.S.R. Item No. 16.21)

Painting two coats excluding priming coat with ready mixed paint for metallic surfaces in all shades on steel or iron work. b) With ordinary Quality Paint (C.S.R. Item No. 16.22)

Providing, Laying, fixing & jointing of P.V.C Pipes as per ISI-4985 (ISI Marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradlents, cutting, jointing and testing complete as per specifications .Including specials and excavation minimum cover 1 mtr (6kg/cm2 pressure) 63 mm o/d (C.S.R. Item No.28.13 b)+ 28.18 + 28.2

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410 ) and Bronze (gunmeted) working parts Sluice Valves ISI marked 14846-2000, including, jointing, testing & cost of Nut, Bolt & insertion sheet all carriage complete ( with the approval of Engineer-in-Charge). a) 80mm i/d Sluice Valves Socketted or Flanged (C.S.R. Item No. 28.27A)

c) 150mm i/d Sluice Valves Socketted or Flanged (C.S.R. Item No. 28.27A)

Bailing out water from the trenches for making new connections in fully charged pipe lines including cleaning trimming and dressing the trenches to correct alignment and grade as required (a) Upto 300mm i/d (C.S.R. Item No. 28.49)

Construction of masonary sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department. (a) 0.60 mtr x 0.60 mtr. (C.S.R. Item No. 28.66)

Hand boring Horizontly for crossing of pipe under road or any other obstacle by using Auger/Bocki method . Including excavation, stringing and jointing of pipe upto 160mm complete. (C.S.R. Item No. 28.71)

Non Schedule Items Painting of Sign Board Complete in all respect. (N.S. Rates)

Dismantling brick of flanged stone flooring without concrete base and recondition (N.S. Rates)

Providing house hold connection including laying, jointing, fixing testing below ground level MDPE pipe and above of ground level GI pipes (as approved by Engineer-In-Charge), including cost of excavation, Refilling, CI bib cock as per IS:210 with stainless steel spindle, 15mm i/d GI pipe 2.50 Mtr. & 15mm i/d MDPE pipe 2.00 Mtr. (length on average basis) 3" uPVC clamp, ISI marked G.M. Ferrule as per IS:2692 connection of 15mm i/d ferrule midium, specials such as tees, bends, sockets, elbow, nipples (100 mm & 150mm) Union Copplings, GI hooks etc., cutting, threading, making hole in wall and testing in treanches in the ground all material should be of approved make (to the approval of Engineer-in-charge) complete in all respect including cost of carriage. (Ref. CSR item Nos. 28.1, 28.36, 28.34 B, 30.65 b) Water Connection on Old pipe line (N.S. Rates)

Water Connection on New pipe line (N.S. Rates)

Repair of old water connection (N.S. Rates)

Providing, installing, testing & Commissioning one no. Electronically acturated, Diaphragm operated, Metering system, Chemical Dosing Chlorinator, suitable for delivering 0.5 to 6.0 Litres of Bleaching powder solution/ Sodium Hypo Solution per Hour under maximum delivery pressure up to 7 kg./ sqcm and suction lift not less than 1.5m as per DWSS standard specifications. (N.S. Rates)