Loading
Loading…
Loading…
Tender Value
₹17.6 Cr
EMD Value
₹17.6 L
Closing Date
2 Sept 2026, 10:30 pm
Chikkamagaluru Urban Development Authority
Rashmi.s
08262295712
8618698112
ESTABLISHING 2X8MVA, 66/11kV SUB STATION AT A B VAJPAYEE LAYOUT AT CHIKMAGALURU
CKMUDA/2026-27/SS/WORK_INDENT16
CKMUDA/2026-27/SS/WORK_INDENT16
Open
Sub-Station
Two Tender Document System(Two Cover)
CKMUDA Commissioner Office Chikkamagaluru
9 documents required · 9 mandatory
To qualify for award of this contract, each Tenderer in its/his name should have in the last five years period i.e. (2021-22 to 2025-26). Mandating satisfactory completion as a prime contractor for at least One Similar Nature of Electrical work involving such as Construction/Shifting/Re-routing of 66kV or above class DC line, to an extent of not less than 50% of the amount put to tender (i.e., Rs.881.00 lakhs). (Work executed and work done certificates issued under Joint Venture shall not be considered)
Executed in any one financial year, the following minimum quantities of work (Supply & Erection) (80% quantity of work put to tender): Certificates of proof shall be enclosed from competent Authority not below the rank of Executive Engineer in Government / Public Sectors/Government Undertaking Organizations. (Quantities executed certificates issued under Joint Venture shall not be considered) (1) Construction/Shifting/Rerouting of 66kV or above category DC line (Route length): 5.10Km
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity: (AxNx1.5 - B), where, A: Maximum value of Electrical engineering works executed in any one year during the last five years (updated to 2026-27 price level) taking into account the completed as well as works in progress. N: Number of years prescribed for completion of the works for which tenders are invited. B: Value, at 2026-27 price level, of existing commitments and on-going works to be completed during the next 09 Months
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
To qualify for award of this contract, each Tenderer in its/his name should have in the last five years period i.e. (2021-22 to 2025-26). Achieved in at least two financial years a minimum financial turnover of Rs.3524 Lakhs. (Electrical Contract Works Only) (Not less than 2 times the amount put to tender).
Each Tenderer should further demonstrate: liquid assets and /or availability of credit facilities (in the name of work) of not less than Rs.528 lakhs (Credit lines/ letter of credit/ certificates from Public sector banks/Nationalized Banks (as per RBI guidelines) not less than 30% of the amount put to tender for meeting the fund requirement etc)
Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five year
List of Financial Resources with Certificates
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work as specified as per bid document
₹7,500
₹17.6 L
29 Jul 2026
29 Jul 2026
4 Sept 2026
10 Aug 2026
10 Aug 2026
Substation Civil
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and t...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out,construction of shoring, strutting, barricading...
Earth work excavation for Foundation by mechanical means for all works & depth up to 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution l...
Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. (Royalty shall be...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Basement & surface level works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Code...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in position Reinforced cement concrete for all Sub-structure works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine m...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant ...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and fixing Modular multi-diameter cable sealing system which is waterproof,fire proof& rodent proof consisting of frames,blocks and accessories to be installed wherever the electrical(power/...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting,hoisting, fixing in position and applying a priming coat of appro...
Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm,aggregate cement rat...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6 per cent bitumen by weight
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fix...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mSqm conforming to IS ...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, inc...
Providing 15mm cement plaster on rough side of single or half with cement mortor 1:4 to brick masonary including rounding off corners wherever required smooth rendering, providing and removing scaffo...
Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (5 Liquid :7 Powder) to the RCC surface like Roof, bathroom...
Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nomin...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 ...
Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less tha...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional ...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat ofexterior primer applied @ 2.20 kg/10 m²) with paint o...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supplying S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 m...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...
Providing and placing on terrace (at all fllor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangment and making necessary holes for inlet, outlet and ov...
Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete....
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead f...
Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance plus or minus1mm), with wall thickness 2.0 mm (plus or minus 0.2 mm), c...
9.118.2 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (plus or minus 0.2 mm), with inbuilt d...
Providing and fixing Fiber Glass Reinforced Plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be...
Providing and fixing to existing door frames Glass Fibre Reinforced Plastic(FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire-retardant grade unsaturated...
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type)
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...
Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...
Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of engin...
Providing and fixing Rainy dual capacity self-cleaning roof top rain water harvesting filter or equivalent filter of FL-200 specification suitable for a catchment area of about 500Sqm. (MR)
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe w...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe w...
Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, col...
Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, col...
Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, col...
Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, col...
Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...
Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensi...
Providing and laying at site of work MS casing caps as per IS 1239 (partII) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum)....
Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...
Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications...
PRESSURE GAUGE :
Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 100 mm
Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm
NON - RETURN VALVE :
Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments (Vol-5, I.no.28.1, P.no.162 )
Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...
POWER CAPACITOR :
Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissionin...
Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/...
GALVANISED MILD STEEL TUBES:
Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one en...
Erection elctrification & Commissioning works of pumpsets :
Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including suppl...
Ercerion of panel board & meter board Unit :
Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipmentsincluding provi...
Main connections:
Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board un...
Supplying heavy gauge PVC conduit pipe ……mm dia ....... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the sl...
Supplying heavy gauge PVC Conduit Pipe ….dia .......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and ...
Supplying heavy gauge PVC Conduit Pipe ….dia .......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and ...
Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 100x75x65mm
Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 135x75x65mm
Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF...
Supplying And Fixing Metal Fan Box with Round Hook.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...
Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...
Supplying heavy gauge PVC conduit pipe ……mm dia ....... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the sl...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. ...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. ...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. ...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. ...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.100 A.
Supplying of on load change over switches 4 poles, AC- 23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution).100 A
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws,bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Ov...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phas...
Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240/450V upto 300mA sensitivity on existing wood/panel board.16-25 A 2 pole
Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240/450V upto 300mA sensitivity on existing wood/panel board.63 A 4 pole
Supplying, fixing and wiring 0 to 1500A CT operated AC analog type Ammeter without CT
Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter
Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter.
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50HzAC with latest micro controller based, digital read out of percentage leakage curr...
Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch
Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Two Way Switch
Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket
Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module
Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch
Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Bell Push
Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch
Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket
Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., andfixingonexisting wood or metal box using N. F. screws.
Extra for supplying 4 mm thick white plastic plate andcovering for junction boxes of size ...... mm conduit using necessary machine screws. 80/90 mm.
Extra for supplying 4 mm thick white plastic plate andcovering for junction boxes of size ...... mm conduit using necessary machine screws.110 mm.
Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A Pendant Holder.
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.4...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint....
Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...
Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply.
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.15" Sweep (450 mm)
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...
Supplying wall mounting fan suitable to operate at singlephase 230v AC. supply.400 mm Sweep (Page No.23 Item No.6.5.2)
Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 4ft - 36/40 W W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than ...
Supplying of recess mounting non integrated type LED down light 18W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clA, LED of Power/COB with CCT...
Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 2ft - 9/10 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. ...
Supplying and Fixing of........mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket 1x40/2x40 W fluorescent tube street light fitting of all capacities to GI...
Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...
Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary ...
Extra length of GI pipe of class B 19mm dia for down rod.
Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with...
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit. The pit shoul...
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed o...
GI/Copper strips for grounding connections, using necessary fixing materials as required.600x600x3mm copper plate
GI/Copper strips for grounding connections, using necessary fixing materials as required.25x3mm copper strip
Transmission Line Civil
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant I...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Substation Supply & Erection including Testing & Commissioning
Power Transformers:
a) 66/11KV, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, Winding Delta/Star transformer, vector group DYn11 with OLTC , RTCC Panel, Numerical RTCC panel, first filling of Oil and 10%...
Circuit Breaker :
SF6 Gas circuit breaker with Semi-Pneumatic / Pneumatic operated / Spring type operating mechanism, including mounting Structures arrangements with rigid, bi-metallic terminal conn...
Circuit Breaker :
SF6 Gas circuit breaker with Semi-Pneumatic / Pneumatic operated / Spring type operating mechanism, including mounting Structures arrangements with rigid, bi-metallic terminal conn...
Isolators : Isolators including marshalling box and suitable terminal connectors, as required as per technical specification with solid core cylindrical post insulators:
Isolators : Isolators including marshalling box and suitable terminal connectors, as required as per technical specification with solid core cylindrical post insulators:
11KV isolators, Double Break 400A, 25KA capacity with rigid bi-metallic terminal connectors suitable for coyote ACSR for Capacitor Bank
11 kV isolator, single break 400 A, 25 KA capacity with Roaster switch, with rigid bimetallic terminal connector suitable for coyote ACSR.(Special Roaster)
CURRENT TRANSFORMER : Current transformers including marshalling boxes, Single phase,oil filled outdoor type with rigid bimetallic terminal connectors suitable for Moose ACSR conductor.
66 kV class, 4...
CURRENT TRANSFORMER : Current transformers including marshalling boxes, Single phase,oil filled outdoor type with rigid bimetallic terminal connectors suitable for Moose ACSR conductor.
66 kV class, 4...
CURRENT TRANSFORMER : Current transformers including marshalling boxes, Single phase,oil filled outdoor type with rigid bimetallic terminal connectors suitable for Moose ACSR conductor.
11kV Class, 25...
Voltage Transformer VOLTAGE TRANSFORMER Single phase, oil filled outdoor type including Marshalling KIOSK with rigid bimetallic terminal connectors suitable for DRAKE ACSR as per technical specific...
VoltageTransformer
SURGE ARRESTOR : (Porcelain housing) metal oxide, Gapless type as per Technical Specification
60 kV, 10 KA, SM type-for Over head I/C lines
VoltageTransformer
SURGE ARRESTOR : (Porcelain housing) metal oxide, Gapless type as per Technical Specification
60 kV, 10KA, SM type-for Transformer
SURGE ARRESTOR : (Porcelain housing) metal oxide, Gapless type as per Technical Specification
9 kV, 10KA station class with connector and clamp
Control and Relay Panel complete
Simplex type control and relay panels complete as per specifications.
For Power Transformer 66/11 kV
Control and Relay Panel complete
Simplex type control and relay panels complete as per specifications.
For 66 kV Transmission line
STATION STRUCTURES : (Including bolts & nuts)
Station towers fabricated out of galvanised mild steel(verticals 1T1) (1.054 t per tower) with peak -3 no's.
Station Beams fabricated out of galvanised mild steel. Beam type 1B1 with peak.(8.2 mtr bay width)(0.553 t per tower)-2 no's.
Tubular type Lighting / lighting Mast (approx wt. 2.812 t)-1 no.
11 kV ODS and take of structure
Supplying & erection of Double pole structure with 9.5 Mts. RCC poles WL 300 Kgs for mounting 11 kV 400 A Roaster Isolators and 9 kV, 10 KA surge arrestor (3 No.) ...
Supplying & erection of DP structure with 9.5 mtr RCC poles, 11 kV 400 A double break isolators, 9 kV, 10 KA surge arrestor (3 No.), H-Frame along with DOLO/HG fuse unit, LTprotection kit/LTD box, LT ...
MOUNTING STRUCTURES :
66 kV Isolators Live point height 6350mm. (0.982t)-05no's
Current transformer. 66 kV (0.158 MT)-12no's
11 kV NCT (0..157 t)-02no's
Voltage transformer 66 kV (0.148 t per structure)-03no's
Lightening arrestors 66 kV (0.116 t per structure)-12no's
Pedestal insulators 66 kV for bus (0.141 t per structure)-12no's
For High pedestal insulators for 66 kV side. (0.150 t per structure)-06no's
11 kV Cable terminating structures for LV side of Trf (0.072MT Per structure)-02no's
11KV GOS/Cable Terminating Structure for 11KV Capacitor Bank(0.158 t per structure)-02no's
BUS BAR FORMATION :
Formation of Main/CrossBus with Single Moose/Drake Conductor.
i) Aluminium pipe conforming to 6340WP of IS - 5082 / 1969 (BS I600-Sch. 40) of following nominal diameter a) 75mm
b) 63mm size connecting isolator to vertical tap
ii) A) Straight taps suitable for 63mm Aluminium tube (BS-1600) of 1750mm vertical height for vertical portion & cross bus on 66KV side with rounded off end.
iii) A) Post insulator clamps suitable for 75 mm Aluminium pipe & Post insulator solid core type - 132-66kV side
b)Expansion Type
iv) Corona Bell Suitable for Aluminium Pipe of size 75mm on 66 kV
Post insulator Solid core Insulator 66 kV, 1 Unit/stack
C Type wedge connector suitable for Drake-Coyote (Line) Note:T-Clamp of HPC Conducor is used
Post insulator clamp suitable for DRAKE ACSR and 66kV Solid core insulator.
Auxiliary Transformer
Supply and erection of Station Auxiliary Transformer-copper winding with oil, outdoor type, 100 kVA, 11 kV/433 V, 3 Ph, Vector group Dyn 11 off load tap changer(5 taps) with ste...
LTAC Distribution panel ( Indoor) comprising of Volt meter, Ammeter & 1 no of ETV meter, 1 I/C MCCB 200A + 2 nos 3 phase, 63A OG SFU + 2 nos 3 phase 32A OG SFU + 6 nos 3 phase 16A SFU ete...
AC Distribution box (outdoor) Single front type with 6 terminals 1200 x 1350 x 300 mm one I/C of 100 A MCCB 20 KA+ 6 O/G 16 A MCB +1 O/G of 100 A HRC Fuse panel 415 V outdoor type
LT Power armoured UG cable as per specification
1.1 kV class 4 X 95 Sq mm L T Aluminium Cable with glands/lugs/ferrules
1.1 kV class 4X 25 Sq mm Copper Cable with glands/lugs/ferrules
1.1 kV class 4X 10 Sq mm Copper Cable with glands/lugs/ferrules
STATION BATTERY & BATTERY CHARGER :
110 V, 200 AH, Battery set consisting of 55 No. cells with accessories as per specification.
Battery charger- suitable for '110 V, 200 AH, Battery set consisting of 55 No. cells- 15 A float and 30 A boost (with float and boost battery charger as per technical specification).
LT DC Distribution panel ( Indoor) as per Technical specification comprising of Earth fault indicator, Indication circuit for AC main failure, 1 No 100A SFU for IC + 12 nos., 32A SFU for OG etc,. comp...
1.1 kV Grade PVC Insulated armoured copper control cables of sizes,with Lugs/Ferrules/Gland as per technical specifications
19C x 2.5 Sq.mm
10C x 2.5 Sq.mm
11kV Switchgear
A) 11kV, 25kA, Metal Clad VCB Switchgear (1600A for Incomer and 1250A for feeders), outdoor type, each comprising of 2IC+8F+1BC+2CB+1AP (Remote Announciation cum Control panel) with...
Capacitor Bank: Design, Engineering, supply, erection(Excluding Civil Work and testing & commissioning) of 2.9 MVAR, 12.1 kV Capacitor Bank, star connected, Double Bank with internal fuses, terminal c...
11KV U.G. Cable with the required cable terminations at both ends.
One run of 11kV, XLPE 95 sq.mm Al., 3 core cable - (to be run for Auxiliary Transformers from 11KV switch Gear to Auxiliary Transf...
11KV XLPE cable, 1000Sq. mm. Aluminium cable from 66/11KV Transformers to 11KV Switchgear.(Single core)
11KV XLPE cable, 240Sq. mm. Aluminium cable 3 Core to be run from 11KV Switchgear to 11kV take off DP Structure.
Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable ( Indoor type )
Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable (Out door type)
Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable ( Indoor type )
Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable (Out door type)
Heat shrinkable type Cable termination kits suitable for 3 x 95 Sq.mm XLPE cable ( Indoor type )
Heat shrinkable type Cable termination kits suitable for 3 x 95 Sq.mm XLPE cable (Out door type)
Equipments for establishing SCADA Communication :
Remote Terminal Unit (RTU) 64 I/O Port
Data Concentrator Unit (DCU) (Site Surveying wiring & Installation , T&C of RTU,DCU and DCU installation to be made in RTU Panel)
2 kVA online UPS (230 V AC 1 phase 50 Hz) with Battery set
Integration of RTU, DCU and UPS with field equipments
Note: Satellite Communication required will be arranged by SLDC Bengaluru the charges has to be paid by the applicant (Sit...
Cables -Supplying and Laying
Current Cables-Copper Core with c/s 4.0 sq.mm Multistrand 4 Core
Voltage Cables-Copper Core with c/s 2.5 sq.mm Multistrand 4 Core
Signal Cables-armoured Copper Core with c/s 0.5 sq.mm Multi strand 10 Core
Control Cables- Copper Core with c/s 1.5 sq.mm Multi strand 10 Core
Supply Cables-Copper Core with c/s 4.0 sq.mm Multi strand 3 Core for AC input to UPS & UPS to RTU,conforming to KPTCL specifications.
Supply Cables-Copper Core with c/s 1Cx 32.0 sq.mm Multi strand for Battery conforming to KPTCL specifications.
FIRE FIGHTING EQUIPMENTS WITH NECESSARY MOUNTING STANDS :
Foam type extinguisher (Mechanical) 50 Ltr. capacity
Foam type extinguisher (Mechanical) 9 Ltr. capacity
Water type (gas pressure type) 9 Ltr. capacity
Carbon di-oxide type 4.5 kg Capacity
Sand type G.I Buckets 15 Ltr. Capacity
Steel stands for above to have 4 buckets to each stand.
MISCELLANOUS ITEMS
Rubber mats 2000 mm x 2000 mm x 12 mm size (Note:As per KPTCLSR 2023-24 1000mmx1000mmx10mm is available hence for 2000mmx2000mmx12mm double rate is considered)
Shock treatment charts, hard board, liminated with coloured pictures & literature both in Kannada & English.(Previous approved DPR rate)
Water filter / Water purifier : Wall mounting type (Aqua-guard type).(rate obtained from GEM portal)
Sub-station name board duly painted.
Fixograph of size 1.5m x 2.5m with English / Kannada alphabets.(Previous approved DPR rate)
Brass cupboard lock 6 levers (best make of approved quality) 75 mm size
Danger board(prohibited) with support structure including fixing in front of the gate(Previous approved DPR rate)
Equipment name plates and earthing name plates including fixing at outdoor yard
Maintenance Tools and Plant:
Portable (mobile) oil pumps (1/2 HP Air pump 500 to 1000 gallons)
Telescopic ladder Aluminium 6 Mtr. Height
Ring spanner set
Tube spanner set
Pipe wrench 24 inch
Pipe wrench 18 inch.
Hydraulic crimping tools up to 1000 Sq.mm
Rubber hand gloves (15 kV tested)
Rechargeable 5W LED hand torch
Insulated cutting plier 12 inch size
Insulated cutting plier 8 inch size
Line live tester AC/DC 500 V
Screw driver 18"
Screw driver 12"
Chain pulley block 5 ton capacity
Hydraulic jack 5T capacity
Pipe derrick suitable for lifting 3 MT and lift of 6 Mtr. Height
Transil oil di-electric break down (with 2.5 mm gap 0-60 kV) Tester.
Insulation megger 2.5 - 5 kV
Insulation megger 500 V
SF-6 gas leak Detector
Multimeter electromechanical
Multimeter Electronic
DC Voltmeter range -5V to + 5V
Hydrometer syring suitable for vent holes
Specific gravity correction chart
Thermometer with wall mounting holder
Protective goggle
Acid resisting jars (4 pint capacity)
Rubber shoes knee height
Grounding sticks extendable upto 18 ft
Wall mounting type holder for hydrometer
Furniture for Control Room Staff and maintenance staff
Steel Almirahs 6 1/2 feet
Steel Almirahs 6 1/2 feet with glass panel doors
Officers tables
Steel Slotted angle rack (big Size)
Steel Slotted angle rack (small Size)
Executive revolving chairs
S Type Arm Chairs
Steel folding Chairs
Earth Mat formation :
Supplying and laying MS.Flat 75 x 12 mm flat welding and applying ACB paint to welded portion as per drawing/standard if required (all other materials to be supplied by contract...
Grounding of equipments with 75 x 12 mm G I flat and connecting equipments to the earth mat/ground pit including all connected works with all materials supplied by the contractor.
Providing 40mm dia, 1.075mtr. long Earthmat Spike of MS Rod including bending top 50 mm etc
Providing C.I. Pipe of 100mm ID 13mm thick 2.75 mtr. long with 2 part GI Flat 50x6mm clamp welded allround the pipe etc., including cost of excavation (all materials supplied by contractor)
Supplying and fixing 450mm dia x 450mm height 1.5" to 2" Hume pipe collars for earth pits.
STATION & YARD LIGHTING (OUTDOOR)
Supplying and erection of street lighting lattice type structure along with GI pipe for fixing of LED lamp (0.182 MT + 5% B&N)-8.5 mtr height
Supply and installation/ Fixing/ Provision o f Outdoortype Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shockproof, IP65 (WeatherProof), rustproof, dustproof, waterproo...
PVC Insulated Copper Control Cables : 1.1 KV PVC insulated Copper Control Cable with glands/Lugs/ Ferrules etc as per technical specification.
Supply of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded poly...
Transmission Line Supply & Erection
Check Survey and Towers spotting Towers using their own equipment
Check survey using their own equipment for 66 kV Plain terrain.
Note: Bidder has to quote for Supply (Wherever applicable) including ...
Inspection of Transmission lines using Drone for Thermal Inspection
Measurement of Temperature of Insulator (All throughout the core of the Insulator)
Insulator fittings
Clamps (Insulator Clamp and Ju...
TOWER 110 KV NARROW BASED TOWER ( KPTCL Design)
DC 'A' Type Tower with Stubs
110 kV - Normal plus 3 Mtrs Extension ( 3.435975MT per tower ) (MS)-2 no's
TOWER 110 KV NARROW BASED TOWER ( KPTCL Design)
DC 'A' Type Tower with Stubs
110 kV - Normal plus 6 Mtrs Extension (3.830887 MT per tower ) (MS)-1 no
DC C Type Tower with Stubs
110kV - normal (5.371779 MT per tower ) (MS)
110 kV - normal plus 3 Mtrs Extension (6.14444 MT per tower ) (MS)-9 no's
110 kV - normal plus 6 Mtrs Extension (6.889149 MT per tower ) (MS)-2 no's
DD 'D' Type Tower with Stubs
110 kV - normal (6.907289 MT per tower ) (MS)-4 no's
110 kV - normal plus 3 mtr extension (7.890289 MT per tower ) (MS)-6 no's
110 kV - normal plus 6 mtr extension (8.799039 MT per tower ) (MS)-2 no's
110 kV - normal plus 9 mtr extension (10.38136 MT per tower ) (MS)-1 no's
110 kV - normal with cross arm (7.60272 MT per tower ) (MS)-1 no
110 kV - normal plus 3 mtr extension with 9 cross arm (8.585719 MT per tower ) (MS)-1=2 no's
110 kV - normal with 9 cross arm (8.585719 MT per tower ) (MS)-1 no
110 kV - normal plus 6 mtr extension with box cross arm (8.585719 MT per tower ) (MS)-1=2 no's
Stub setting templates
Setting of stub templates and alligning, dismantling and transportation of templates from one location to the other location for 110 kV
Supply of Galvanised Bolts & Nuts
Tower accessories
Supplying and fixing GI angle 450 x 450 mm 1Mtr length with cleats, bolts nuts as per specification and fixing above 0.5 mts length each at inner and outer surface of tower to facil...
Supplying and fixing Barbed wire
Phase plate (set of 3)
Earth bond 300 mm long
Earth bond 450 mm long
Grounding of tower with GI Pipe including the cost of GI pipe including Earthdrop
Conductor and Earthwire
High performance conductor (HPC) of Ampacity 700A (In plain terrain)
Ground wire- 7/3.15mm- Plain Terrian
48 fibre Dual Window Single Mode (DWSM) OPGW
Insulator strings and clamps for HPC conductor with Hardwares and Arcing Horns
Single Tension string-66 kV, 90 kN Tension Type Composite polymer long Rod Insulators with sectional length -725 mm alon...
Double string-66 kV, 90 kN Tension Type Composite polymer long Rod Insulators with sectional length -725 mm along with hardware HPC Conductor Double Tension Fitting with Terminal pad with arcing Horn
Single Suspension string-66 kV, 90 kN Suspension Type Composite polymer long Rod Insulators with sectional length -1015 mm along with hardware for HPC Conductor Single Suspension Fitting with Termin...
Accessories for HPC conductor
M S C Joints suitable for HPC Conductor
Dead End clamps for HPC Conductor
Repair sleeves suitable for HPC Conductor
T Clamps suitable for HPC Conductor
Vibration dampers for HPC Conductor
Tack welding of Bolts and Nuts (No of tower x 300)
Hardware & Accessories for 48F OPGW CABLE ACCESSORIES
Vibration Dampers for 48F OPGW CABLE
Down Lead clamp assembly
Tension Assembly for Dead End for 48 OPGW
Tension Tower Joint Box assembly for 48 Fibre OPGW including all accessories for joint box (Splicing Location)
Tension assembly -Double Tension pass through for 48 Fibre OPGW
Tension fitting assembly on suspension Tower Joint Box for 48 Fibre OPGW including all accessories for joint box (Splicing Location)
Single Suspension clamps assembly for 48F OPGW
Joint Box for 48 Fibre OPGW
FODP 96F : Indoor Type consisting of 2 No's of rack mounted LIU (to be housed in FODP) with 48 Ports each with FCPC coupling & pigtails
Installation, testing & commissioning of FODP for 24F/48F/96F : Indoor type, rack
mounted with FCPC couplingand pigtails
Fibre Optic Approach Cable
48 Fibre(DWSM) - Including installation hardware set for 48 fibre approach cable
Dismantling of existing super structure/tower materials and despatching to the nearest MW stores (for LINES)-(1 Number of 66 kV DC Kalapatharu design A+3 tower T.No-34 in Mugulavalli- Balehonnur Line...
Releasing & Restringing of Existing Coyote ACSR Conductor (200 Mtr span length considered) Span Length between T.No-33-34-35 =400Mtrs)
Releasing & Restringing of Existing Ground Wire (200 Mtr span length considered)
Clearing of bushes
Clearing for bushes tree branches etc., upto 3 Mtr. width for detailed survey 66 kV Plain terrain
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
ABVP SS BID DOC FINAL.pdf
Tender Document • 2.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].