AMC of equipments of Air-Conditioning and Ventilation System of VDG, FOTIA, FIPLY, HIRUP, CAP, Boiler House, CMPD, LNCM, Engg. Hall-4 and Supercomputing Facility Modlab D Block for a period of 24 months at north site, BARC, Trombay Mumbai-85

Amount

Attending day to day and periodic maintenance of the following equipments (Machine detail as per Annexure- I) for a period of 24 months as per the clause No. 1 of Technical Specifications.

10 - 16 TR Capacity AHU

20 TR Capacity AHU

25 TR Capacity AHU

30 TR Capacity AHU

Pump upto 10 kW

Pump above 10 KW to 18.5 KW Pump

Pump 22 kW

Inline pump 22 kW

Pump upto 30 to 37 kW

Pump 90 kW

Air Compressor - Parkeen, Model TSI, Size 4&2.5x2.75, 300 Lbs/Inch., 150 PSI

Air Compressor - CP, Model CPA20 TM, 63.2 CFM

Blower - AR10, Size 33 (7.5 KW)

15 TR De-humidifier

Overhauling of following equipments once in a contract period as per the Clause No. 2 Technical Specification.

Pump upto 10 KW

Pump above 10 KW to 18.5 KW Pump

Pump 22 KW

Pump upto 30 to 37 KW

Pump 90 KW

Supply & Installation of raw salt as per the Clause No 3 of Technical Specifications.

Supply & Installation of feric alum as per the Clause No 4 of Technical Specifications.

Supply & Installation of coupling bolt with nuts, washers & rubber bush for 90 KW M&P make pump as per the Clause No 5 of Technical Specifications.

Supply and Installation of 4 inch diameter canvas ISI marked hose pipe with clamp for submersible pump and each length 30 meter as per the Clause No. 6 of Technical Specification.

Supply and Installation of following pump coupling as per Clause No. 7 of Technical Specification.

love joy coupling L-100

love joy coupling L-110

love joy coupling SW-110

love joy coupling SW-150

Flange coupling with pin bush for 22 kW pump

Supply and Installation of bearing of following capacity of AHU's as per Clause No. 8 of Technical Specification.

10 TR capacity AHU

15 TR capacity AHU

16 TR capacity AHU

20 TR capacity AHU

25 TR Capacity AHU

30 TR Capacity AHU

Supply, Installation, Testing & Commissioning of mechanical seal of 3.7 kW M&P pump, Model No. 50/80 BSM as per the Clause No. 9 of Technical Specification.

Supply and Installation of Multi Purpose Grease use for pumps, blowers, motors, etc. as per the Clause No. 10 of Technical Specifications.

Supply and Installation of Unirex-N3 grease (high temperature bearing grease) use for motor as per the Clause No. 11 of Technical specifications.

Supply and installation of washable 4 ply HDPE air filter with following thickness as per the Clause No. 12 of Technical Specification.

Supply and Installation of 3 mm non asbestos gasket sheet as per the Clause No. 13 of Technical Specification.

Supply and Installation of 19 mm thick Closed Rubber cell insulation as per the Clause No.14 of Technical Specification

Supply, Installation, Testing and Commissioning of bearing induction heater as the Clause No. 15 of Technical Specification.

Supply Installation Testing and Commissioning of VAV dampers complete with suitable sensing element & temperature controller as per the Clause No.16 of Technical Specification.

Supply, Installation, Testing and Commissioning of digital vacuum gauge as per the Clause No. 17 of Technical Specification.

Supply, Installation, Testing and Commissioning of vacuum pump maximum capacity 0.05 mm of Hg, Flow - 300 CMH as per the Clause No. 18 of Technical Specification.

Supply and Installation of steel cupboard for storage of spare parts of plant and user's equipment's as per the Clause No. 19 of Technical Specification.

Supply, Installation, Testing and Commissioning of Differential pressure transmitter suitable for VFD of chilled water pump complete with local display, signal/control cable, mounting accessories, etc. as per the Clause No. 20 of Technical Specification.

Supply, Installation, Testing and Commissioning of marine plywood thickness of 19 mm as per the Clause No. 21 of Technical Specification.

Supply, Installation, Testing & Commissioning of following parts of 5 TR capacity DX-System of De-humidifier as per the Clause No. 22 of Technical Specification.

Compressor suitable for R 22 refrigerant

Evaporator coil

Condenser coil

Expansion valve

Refrigerant R 22

Supply, Installation, Testing & Commissioning of following sizes of valves as per the Caluse No. 23 of Technical Specification.

25 NB Class 2 threaded type gun metal globe valve

50 NB Class 2 Flange type gun metal gate valve

80 NB Class 2 Flange type gun metal gate valve

Supply, Installation, Testing and Commissioning of Bourdon Tube SS Pressure gauges complete with SS Ball Valves and SS Siphon tube. Pressure gauge range from 0-10 Kg/cm2 as per the Clause No. 24 of Technical Specification.

Supply, Installation, Testing and Commissioning of 4" dia. dial type temperature gauge, range 0 to 50 ºC complete with SS thermowell as per the Clause No. 25 of Technical Specification.

Carry out HVAC related day to day works including preparation of AutoCAD drawing, reports in computer with MS office, take measurements, documentation & record keeping, site supervision etc as per the Clause No. 26 of Technical Specification.

VOLTALIMITED

M/s Associated Engineers

Bluestar Limited