preparing the estimate rates for the purchase of TROMMEL, Digital Weighing Bridge and FATKA Machine for the solid waste management centre of Butibori Municipal Council.

Trommel/Screening Machine Material To Be Screened Compost Converted From Garbage Trommel Dimensions Screen Diameter 1200mm, Length 4500mm Material Of Const ruction 1.6mm Thick Screen With 24mm Perforation Reinforcement Section 10mm Flat Ring And 5mm Thickened Shells Moter/Drive 3HP Geared Motor From Main Drive @1440 RPM Moter Class IE2 Electric Supply Single Phase (230 V,50 HZ) Control Pannel PLC Based Supporting Structure Fabricated From Channel 100mm*50mm *5mm Angle 50mm*50mm*5mm Electrical Control Consisted With Fuse less Protection With Emergency Switch And VFD For Setting Of Desired RPM For Screen Finishing & Painting Entire Machine Exposed Surface Is Ground And To Be Painted With Enamel Paint Of Customer Desired Shade Specification Of Conveyor Belt/Fidder Material To Be Handled Compost Converted From Garbage Type Three Equal Roll Through Belt Conveyor Center To Centre Length 6.0 meter Belt Width 600 mm Conveyor Frame Channel 100*50 Drive/ Tail Drum Diameter 320mm with Diameter 50mm Shaft At Bearing Step Carrying / Return Idler Diameter 76 mm With Bearing And Seal At Both Side Moter/Drive 3HP Geared Motor From Main Drive @1440 RPM Supporting Structure Fabricated From Channel 100*50 mm Take up Screw type Up For Belt Tightening Electrical Control Consisted With Fuse Less Protection With Emergency Switch Finishing & Painting Entire Machine Exposed Surface Is Ground And To Be Painted With Enamel Paint Of Customer Desired Shade

Digital Weighing Bridge Weigh Bridge Capacity 30 MT Weigh Bridge Plate Form Size (L*W) 7*3 Meter No. Of Load Cell 6 Load Cell Type Ball Type Weigh Bridge Top Plate Size 8 MM Weigh Bridge Type Pit Less Sandwich Type Load Cell foundation Plate Size 400MM*400MM*12MM Load Cell Cable Conduits Inbuilt Structure Design Modular Type Bolt Less Technology Structural Weights Approx 4500Kg Plate Form Top Plate with Antiskid Yes Paint Epoxy

Fatka /Plastic Dust Remover Machine Capacity 3 To 5 MT/Day Motor 3 HP Drum Size 1000 MM Drum Length 1400 MM Rotor 9 Inch. Dynamically Balanced Usage For Cleaning Dust From waste Plastic Weight 450 Kg. Approx Over All Dimension L: 72 “ W: 58” H:58” Power Supply 415 V AC ,3 Phase + Neutral - Earthing (415 V AC 50 HZ) Motor Starter Brand Provided