Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.5 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | Rejected-Technical | - | Rejected-Technical L2 |
Tender Value
₹9 L
EMD Value
₹9,000
Closing Date
28 Aug 2025, 3:00 pmClosed
Executive Officer
Attoor Town Panchayat
Providing motor pipeline at Moovottumugam filter to Movottumugam OHT in Attoor Town Panchayat
2025_DTP_590423_1
183/2025/A1-2
Open Tender
Civil Works - Water Works
Works
90 days
Attoor Town Panchayat
Please refer Tender documents.
1 document required · 1 mandatory
₹0
₹9,000
19 Sept 2025
8 Aug 2025
28 Aug 2025
8 Aug 2025
28 Aug 2025
8 Aug 2025
Amount
Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc complete complying with SS20B. TNDSS No:23&24
Cement concrete of mix 1:4:8 (one part of cement four part of sand and eight part of aggregates) using 40 mm gauge machine broken granite stone jelly for foundation including de watering if found necessary and laid in layers of not more than 15 cm thick well rammed and consolidated etc complying with standard specification. TNDSS No:28
Supplying and erecting centering for sides and soffits including supports and strutting up to 3.29 m height for plain surfaces such as RCC slabs rectangular beams Tee or L beams lintels, stair case beam etc. in all floors with all cross bracing using mild steel sheets of size 90x60 cm and BG10 gauge stiffended with welded mild steel angles of size 25x25x3 mm for boarding laid over silver oak country wood joists of size 10x6.5 cm spaced at about 90 cm center to center and supported with casurina props of 10 cm to 13 cm Ø spaced at 75 cm center to center etc. complete complying with standard specification in all floors. TNDSS No:30&36
Supplying and erecting centering for sides and soffits including supports and strutting up to 3.29 m height for plain surfaces such as RCC slabs rectangular beams Tee or L beams lintels, stair case beam etc. in all floors with all cross bracing using mild steel sheets of size 90x60 cm and BG10 gauge stiffended with welded mild steel angles of size 25x25x3 mm for boarding laid over silver oak country wood joists of size 10x6.5 cm spaced at about 90 cm center to center and supported with casurina props of 10 cm to 13 cm Ø spaced at 75 cm center to center etc. complete complying with standard specification in all floors. TNDSS No:30&36 (for column)
Supplying, fabricating and placing in position of Steel Reinforcement using Mild steel or ribbed tar steel rods, for all RCC works as per the design given by the departmental officers including cost of steel cutting, bending, placing in position and binding with binding wire and all labour charges for cutting, bending, tying and placing in position etc, complete. TNDSS No:97
Reinforcement Cement concrete 1:1½:3 (one part of cement one and a half part of sand and three part of aggregates) using machine broken granite jelly of 20 mm size for all reinforced cement concrete works excluding cost of centering shuttering strutting and also cost of reinforcement grill in position but including laying vibrating with mechanical vibrators using finishing etc complete, as directed by the departmental officers etc complete complying with standard specification. TNDSS No:30
Brick work in cement mortar 1:5 (one part of cement five part of sand) mix using best country bricks of size 8¾"x4¼"x2¾" from approved quarry including curing, cost and conveyance of all materials to site and all labour charges etc complete as per standard specification.
Plastering walls with cement mortar 1:4 (one part of cement four part of sand) 12 mm thick including all cost and conveyance of all materials and all labour charges etc. complete as per standard specification. TNDSS No:61
Cement concrete of mix 1:1½:3 (one part of cement one and a half part of sand and three part of aggregates) using 20 mm gauge machine broken granite stone jelly for foundation including de watering if found necessary and laid in layers of not more than 15 cm thick well rammed and consolidated etc complying with standard specification.
Painting the new walls two coats over one coat of priming with best cement paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by the department officers.
Supply and delivery of open well submersible pump set having a duty condition of 250 lpm discharge against head of 75 metre confirming to IS specification with ISS marking suitable for installation panel board including cost of all materials and all conveyance charges etc complete as per standard specification.
Supply and delivery of wall mounting type control panel board of Ammeter, Voltmeter single phase prevents insulator-indicating lambs, STAR DELTA / DOL starter. Suitable for 7.5 HP suitable certificate pump set including all charges.
Supplying, delivery and fixing in position of following PVC / GI pipes and specials of approved quality and good variety excluding fixing charges etc complete.
80 mm GI pipe
80 mm GI coupling
80 mm GM gate valve
80 mm hex nipple
80 mm non return valve
80 mm GI elbow
80 mm GI bend
80 mm GI union
80 mm GI tee
Supply and delivery of flat type 6 sq mm PVC sheathed 3 core conductor cables conforming to IS 694 / 1990 with ISI marking suitable for submersible pump sets etc complete.
Supplying and fixing Galvalium Sheet roof using necessary trusses, purlins and 'U' or 'J' bolts, nuts, screws, nails and bitumen washers including cost of labour and materials etc complete complying with standard specification as directed by the departmental officers.
Supplying and fixing in position of vertical column arrangements with 80 mm Ø size GI pipe and base plate of size 30 x 30 x 10 mm and bed plate of size 30 x 30 x 12 mm and with support of 50 x 50 x 6 mm size angle are provided at base and bed plates to GI pies and drilling holes in the MS angles if necessary to accommodate the bolts, including one coat of red oxide primer etc. complete complying with standard specification and as directed by the departmental officers.
Labour charges for the erection of submersible pump set in bore well / open well including fixing and jointing submersible cable with proper clamps up to the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges up to the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pump set and trail run for 10 days.
Chellaian Sundarraj (BID ID -1441858)
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .