ADDN/ ALTN AND SPECIAL REPAIRS TO FLOORING AT TAGORE BLOCK (B-12) OF NCS CHANAKYAPURI, PROVISION OF STORE ROOM NEAR BLDG NO B-12 (RAMAN BLOCK) AT NCS CHANAKYAPURI AND PROVN OF DEFICIENT AIR CONDITIONERS FOR OFFICES OF HQ IDS AT KASHMIR HOUSE UNDER GE

Amount

B&R PORTION: Taking down shutters of any description Resecuring or easing & adjusting exc 1 sq. m and n exc 2 sq. m each and refixing in same opening complete all as specified and directed.

Dismantling floor, hearth or wall tiles including cement mortar bedding (but not backing), removing unserviceable tiles from site and rubbish off the premises complete all as specified and directed.

M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed.

M & L for Machine cut pre polished kota stone slab/tiles flooring 20-25mm thick in any size over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and incl 15mm thick screed bed in cement mortar 1:4 complete in all respect complete all as specified and directed.

M & L for Machine cut pre polished kota stone slab/tlies 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed over and incl 10mm thick screed bed in cement mortar 1:4 complete in all respect complete all as specified and directed.

M & L for joint free glazed ceramic coloured tiles in vertical surface 350 x 250 x 7 mm or 450 x 350 x 7 mm thick with matching highlighter over and including 10 mm thick rendering in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tiles (Design/colour of tiles will be approved by GE) complete all as specified and directed.

M&L for complete removal of existing treatment from old surfaces of wall scrapping by machanical means and applying two coats of oil bound distemper using roller brush over a coat of primer and over incl one coat of Birla putty complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F Pre-painted galvatume aluminium zinc coating GI based corrugated/curved at one end steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling structural steel work in?cluding doors, gates but excluding framed truss etc complete all as specified and directed.

M&L for mild steel framed work as in trusses, purlins, rafters etc including cleats, and steel plates, wind ties Fe-290 (Gde E?165) complete all as specified and directed.

M&L for Applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces any description, not otherwise described over 10 cm width or girth complete all as specified and directed.

Excavating in trenches, n. exc 1.5 m wide and n. exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n. exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed.

M&L for brick work with sub class ‘B’ brick, straight or curved on plan exceeding 6m means radius in CM 1:6 with old size bricks complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement (Externally) complete all as specified and directed.

M&L for Rendering 15mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement all as specified and directed.

M&L for Preparing newly plastered surfaces of walls and applying two coats of oil bound distemper coat of coat of wall putty 2 to 3mm thick on plasterd surfaces preparatory to distempering on wall surface complete all as specified and directed.

M&L for Preparing newly plastered surfaces of walls and applying two coats of exterior emulsion paint (Apex) over a coat of primer and 2 to 3mm thich wall care putty complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers n. exc 25 CM in any type of soil complete all as specified and directed.

Removing excavated meterial n exc 50 m and depositing where directed at a level n exc 1.5 m above starting point in soils complete all as specified and directed.

M&L for Cement concrete Type D-2 1:4:8 (using 40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete 1:1.5:3 nominal mix, using 20mm crushed stone agg as in beams,roof beams, cantilevers,lintel over 1.5m span, bands, chajjas etc. complete all as specified and directed.

Use and waste of form work to sides of concrete foundations footings base of columns, plinth beams , lintel beam,raft and raft beams, sides ansd soffits of foundation complete all as specified and directed.

S & F for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking bending spirally for hooping for coumns, hooking ends and binding with and includng mild steel wire (annealed) not les than 0.9 mm dia or secring with clips. (annealed) not less than 0.9mm dia, complete all as specified and directed.

S&F Mild steel TMT bars (conforming to Fe 500/Fe 550) 6 to 8mm dia in stirrups cut to lengths bent to shape required including cranking bending and spirally hooping for columns hooking ends and binding with MS wire annealed n.less then 0.90mm dia complete all as specified and directed.

M&L for 25mm thick cement concrete 1:2:4, type B-1, (12.5mm graded stone aggregate) as in sub bsae floor finishing the cement concrete complete all as specified and directed.

S & F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed..

S&F 30 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 200 mm Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm Extruded aluminium alloy handles, fabricated type., anodised complete all as specified and directed.

S&F 150 mm Extruded aluminium alloy handles, fabricated type., anodised complete all as specified and directed.

S&F Butt hinges in 100 mm Size, heavy weight, cold rolled mild steel, complete all as specified and directed.

S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

M&L for two coat of synthetic enamelled paint over a coat of primer in any approved pattern and colour including preparation of New surfaces of wood exceeding 10cm width or grith not other wise provided complete all as specified and directed.

E&M PORTION: Supply, installation, testing and commissioning of Inverter type Hot and Cold Split Air-conditioner Hi wall Model of cooling capacity 2.0 TR consisting air cooled copper condenser coil, Inbuilt Stabilizer, 3D Airflow, PM 2.5 filter, Anti-corrosion treatment for better air quality, Display on Indoor unit, cordless LED/ LCD remote control ON/Off and other parameters, hermetically sealed compressor, fan motors with fan/blower, DX cooling coil, air filter, safety Controls/overload protection ,electrical wiring, first charge of Refrigerant (Non CFC) and Oil etc with 5 star BEE rating suitable for working on single phase 230V,50Hz power supply etc. complete in all respect complete all as specified and directed. Make: Bluestar/ Hitachi/ DAIKIN

Supply, installation, testing and commissioning of Split Air-conditioner Hi wall Model of cooling capacity 1.5 TR consisting air cooled copper condenser coil, 3D Airflow, PM 2.5 filter, Anti-corrosion treatment for better air quality, Display on Indoor unit, cordless LED/ LCD remote control ON/Off and other parameters, suitable compressor, fan motors with fan/blower, DX cooling coil, air filter, safety Controls/overload protection ,electrical wiring, first charge of Refrigerant (Non CFC) and Oil etc with at least 3 star BEE rating suitable for working on single phase 230V,50Hz power supply etc. complete in all respect complete all as specified and directed. Make: Bluestar/ Hitachi/ DAIKIN

Supply & fixing of interconnecting copper refrigerant pipe work duly insulated with elastomeric nitrile rubber type tubular insulation and interconnecting copper conductor PVC insulated cable as per OEM specs between indoor & outdoor units as per Size: 5/8" and 3/8" complete all as specified and directed.

Supply & Fixing of PVC drain pipe compete with fittings, supports as per specification Size: 25 MM Diameter complete all as specified and directed.

Supply and fixing of powder coated MS sheet metal stands for mounting outdoor condensing unit complete all as specified and directed.

Supply and fixing of GI Cable Tray with cover & accessories, beends etc. size: 40 MM x 200 MM x 40 mm complete all as specified and directed.

M&L for submain wiring with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type, 1100 volts grade 2 x 4 sqmm complete drawn in and includindg medium grade rigid non-metallic PVC concealed conduit and its accessories along with 1x 4 sqmm PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type for continuous earth wire and duly connected to common earth dolly complete all as specified and directed.

Supply and fixing modular metal clad single pole & neutral with a 2 pin & earth plug and socket complete with MCB SP 32/20 Amp, 230 volts complete all as specified and directed.

Tanveer Associates

HANUMAN BUILDERS

Shivam Firetech Engineers

B S R Enterprises

BEHAL TRADERS

friends associeates

SANJEEV ENTERPRISES

M/S SONU ENTERPRISES