SPL REPAIR TO BARRACK STORES BSO OFFICE, PROVN OF 4X TOILET, 2X URINAL AND 1X BATHROOM FOR GUARD POST, OUT BDY WALL AT GAS GODOWN AND SUPPLY POINT UNDER AGE B/R-II OF GE (N) MAMUN

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.5 sqm complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm and n.exc 4 Sqm each complete all as specified and directed.

Taking down cement plaster on brick walls or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness, below or above ground level, complete all as specified and as directed.

Demolition of brick work or stone masonay built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concrete articles and removal of debris/rubbish off the premises etc complete all as specified and directed.

Taking up or down steel tubing 15mm dia and connections, including cleaning for refixing or removal to store, complete all as specified and as directed.

Taking up or down steel tubing 20mm dia and connections, including cleaning for refixing or removal to store, complete all as specified and as directed.

Dismantling of rolled mild steel as in purlins, rafters etc and refixing of purlins, rafters or truss including necessary cleats, complete all as specified and directed.

Dismantling of rolled mild steel as in purlins, rafters etc including necessary cleats, complete all as specified and as directed.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings and removal of rubbish complete all as specified and directed.

Excavating in trenches n exc 1.5m wide and n exc 1.5m depth for foundation etc or for shafts, well, cesspits, manholes, cable trench, poles, pier holes, etc n exc 10 sq m on plan and n exc 1.5m depth and getting out in soft/loose soil complete all as specified and directed.

Returning filling, in including spreading , levelling, watering and well ramming in layers not exc 25 cm each complete all as specified and directed.

Removing excavated material to a distance not exceeding 50 meters and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for Concrete bed to drain pipes 200 bore including packing under, and haunching against the sides & surrounding of pipes after they are laid and tested; in cement conctrete type C-2, 1:3:6, using 40 mm graded crushed stone aggregate complete all as specified and directed.

M&L for 150 mm thick Concrete bed to drain pipes 200 bore including packing under, and haunching against the sides & surrounding of pipes after they are laid and tested; in cement conctrete type C-2, 1:3:6, using 40 mm graded crushed stone aggregate complete all as specified & directed.

M&L for 200 mm bore reinforced cement concrete pipes, class NP3, laid and jointed complete with collars, complete all as specified and directed.

M&L for 150 mm bore reinforced cement concrete pipes, class NP3, laid and jointed complete with collars, complete all as specified and directed.

M&L for Providing, precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates), as in cover slabs (for septic tanks, manholes and the like) and similar articles including necessary moulds/fromwork etc, set and jointed in cement mortar (1:6) complete all as specified and directed.

M&L for PCC 1:3:6 Type C1 (using 20 mm graded crushed stone aggregate) as in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, benching to manholes, kneelers, apex stones,bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc including necessary form work complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for RCC M-25 ( Design mix) as in beams, cantilever, bressummers, lintels over 1.50m span complete all as specified and directed.

M&L for RCC M-25 ( Design mix) as in Slabs supported on walls, beams and columns in floors roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar works, flat, rough finished surafaces of concrete; not exceeding 200mm thick (horizontal or sloping) complete all as specified and directed

Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floors & roofs n exc 20cm wide & & sides of RCC/PCC bands in walls, horizontal or sloping, & similar work exc 10cm but exc 20cm wide, rough finished surfaces of concrete complete all as specified and directed.

M&L Mild steel TMT bars 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Mild steel TMT bars 5 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

Brick work with fly ash bricks (Old Size bricks) straight or curved on plan exc 6 mtr mean radius built in CM 1:4 complete all as specified and directed.

M&L for Brick work with fly ash bricks (Old Size bricks), sub class'B' bricks straight or curved on plan to any radius as in half brick thick walls, built in CM 1:4 complete all as specified and directed.

M&L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering copmlete all as specified and directed

M&L for 75mm thick cement concrete type D-2,1:4:8 (40mm graded crushed stone aggregate) as in sub floors, sub bases, floors and pavings etc complete all as specified and directed.

M&L for 25mm thick PCC type B-1, 1:2:4 ( using 20mm graded crushed stone aggregate) as in sub floors for laying floor finish complete all as specified and directed.

M&L for non skid joint free ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floor, skirting/dado or verticle surface etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement over 15mm thick screed bed or bedding layer of mortar in CM 1:4 inculidng dismantling floor, hearth or walls tilling and terrazo topping including cement mortar bedding ( but not backing), rubish off the premises, complete all as specified and directed.

M&L for Non skid joint free ceramic coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:4) complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 600x300x7mm or 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick screed bed or bedding layer of mortar in CM 1:4, complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to walls, fixed with self tapping screws complete all as specified and directed.

S&F of Pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in as in ridges, hips, valley gutters, drip and straight flashings, fixed with self tapping screws, complete all as specified and directed.

M&L for Rendering 10mm thick on fair faces of brick work/ concrete sruface in cement mortar (1:6), finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick plaster in cemet mortar 1:4 external layer of plaster shall be mixed with liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc, surface finished even and smooth with using extra cement complete all as specified and as directed. Note: WPC shall be measured and paid for separately.

Supply only liquid water proofing compound (Makes :Pidilite Industries / Impermo /Snowcem India Ltd / Sika )

M&L Preparing new surfaces applying three coats of white wash on wall complete all as specified and directed.

M&L Preparation of new plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth and two coats of distemper oil emulsion over a coat of primer of new surfaces complete all as specified and directed

M&L Preparing new plastered surfaces of walls and applying two coats of cement base paint, complete all as specified

M&L for 10mm thick cement plaster on brick or concrete surfaces, as in ceiling / facia / chajja etc. in cement mortar 1:3 finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of new plastered ceiling surface and applying three coats of white wash complete all as specified and directed.

S & F 2nd class hard wood 35mm thick glazed and skeleton door shutters factory made, open rebated and prepared to receive glass or gauge etc with rounded, chamfered or mitred sash bars edges of framing plain chamfered or rounded fitted with cut and mitred beads and fitted to chowkats for securing glass/gauge, size of stiles rails and other parts as per clause 8.20 (a) of SSR Part-I 1991 (Larger size to be provided)incl two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

Supply and fixing factory made single extruded WPC(Wood Polymer Composite) solid prepainted type flush door shutter with CNC cutting of size 35mm thick comprsising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A caategory with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be finished with UV coating minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S. complete all as specified and directed.

Supply and fixing of Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat prefinished with UV coating of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardanant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid forseparately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F pressed steel frames for doors/windows of size size 125x60 mm (1.25mm thick MS sheet) with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, duly filling of cement concrete 1:3:6 type C-0 (using 12.50 mm graded crushed stone aggregate) to back of chowkhats and two coats of synthentic enamel paint complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat prefinished with UV coating of size 45x70 mm (single rebate) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with properties of being termite/borer proof, water/ moisture proof and fire retardant, fixed in position with and including MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: (i) For WPC solid door/window frames minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. (ii) Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed.

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed.

S&F aluminium anodized barrel tower bolts 200 mm of extruded section (as per sample) fixed complete all as specified and directed.

S&F aluminium alloy butt hinges 100mm long with galvanised mild steel hinge pin type C 21, complete all as specified and directed. .

S&F 150 mm size aluminium alloy handles, febricated type extruded section (as per sample), complete all as specified and directed.

S&F 300mm, MS rat tail door springs for door closer, complete all as specified and directed.

S &F Steel ventilator with top hung shutter including hinges, steel peg stay, including applying two coats of synthetic enamal paint, complete all as specified and directed.

S&F Box type Steel windows and ventilators comprised of tubular frame and shutters made out of 1.25mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter with side hung shutters with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolts 150mm long for each leaf and 10mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks (1:2:4 type 12.50mm graded crushed stone aggregate) including 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/galzing pins squres n.exc 0.5 sqm in each plane, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.4mm and fixed with stainless steel wire staples including two coats of synthetic enamel paint over a shop coat of red oxide primer etc. all as shown on drg No CEPZ /TD-354/09 sheet 1/3 to 3/3 complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares not exc 0.50 Sqm in each pane complete all as specified and directed.

S& F Galvanised mild steel wire cloth 0.56mm nominal dia and average width of aperture 1.18 and fixed with tinned tacks or galvanised wire staples complete all as specified and directed

S&F in repair towel rail, brass, CP 600 mm long 15mm dia pipe of 1mm thick complete all as specified and directed.

M&L for PCC type C-1, 1:3:6 (using 20mm graded crushed stone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair including making joints not more than 2.5 m (or as directed) and at corner, filled with bitumen 85/25 and sand in ratio 1:2 by weight complete all as specified and directed.

PCC 85mm thick type B-0, 1:2:4 (using 12.5mm graded crushed stone aggregate) as in floor laid in alternate bays finished fair and even without using extra cement. complete all as specified and directed.

M&L for forming Construction joint 30mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified and directed.

S&F 15mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor including all fittings complete all as specified and directed.

S&F 20 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings

S & F brass CP Shower rose with or without swivel joints, (any size) including fixing to steel pipe or union complete all as specified & directed.

S&F Stop valve concealed cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with crutch lever handle screwed both ends for iron pipe 15mm bore dia fixed in repair, complete all as specified and directed.

S&F Bib taps, chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm, acomplete all as specified and directed.

S&F 15mm bore dia angle valve / stop valve cast copper alloy capston head chromium plated (as per sample), fancy type ISI marked with crutch or butter fly handles screwed down, screwed for iron pipe complete all as specified and directed.

20 mm size gun metal globe or gate valves with iron wheel head, screwed both end for iron pipe and fixed cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 20mm bore complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F Vitreous china wash basin, white flat back, size 550 x 400 mm (as per sample), brackets, CP waste coupling and cutting for and pinning in ends of brackets or errecting stand including 32 mm dia waste pipe complete all as specified and directed.

S&F 15mm bore pillar tap capstan head cast copper alloy, chromium plated, screwed down high pressure with or without letters HOT or COLD with long screwed shank and fly nuts screwed for iron pipe, ISI marked complete all as specified & directed.

S&F Waste coupling, 32mm dia, of PTMT (half or full threaded) .(Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed.

S & F in repair vitreous china squatting pan water closet, orissa pattern, size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including cast iron 'P' or 'S' trap, front or back inlet and foot rests, any pattern including cement concrete bedding, complete all as specified and directed.

S & F in repairs vitreous china wash down water closet pan "Pedestal" coloured including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinge devices & making good to floor in cement mortar M-15 (1:2:4) type B-1 (using 20mm graded crushed stone aggregated, complete all as specified and directed.

S & F in repair 10 litre capacity PVC valveless, low level, synphonic action type, flushing cistern, with inlet, ball valve, float valve, handle including brackets including 32mm dia PVC flush pipe of suitable size and making necessary connections to water supply pipe line and jointing to WC, complete all as specified and directed.

110mm bore dia PVC (SWR) pipes, double socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

110mm bore dia PVC (SWR) bends, complete all as specified and directed.

S&F PVC(SWR) pipes, 75 mm external dia double socketed in any length with rubber joints, fixed to walls/under floor with PVC brackets/clips including under floor will be coverd in PCC 1: 3:6 as complete all as specified and directed.

S&F PVC (SWR) bends suitable for 75 mm external dia complete all as specified and directed.

S&F PVC (SWR) 75mm bore vent cowl complete all as specified and directed.

S&F PVC (SWR) 110mm bore vent cowl complete all as specified and directed.

75mm dia PVC floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) with CP grating with or without hole for waste pipe, complete all as specified and directed.

Rotational moulded polythylene 1000 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including 20mm brass ball valve high pressure with brass rod & high density plastic ball, complete all as specified and directed.

Rotational moulded polythylene 500 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including 20mm brass ball valve high pressure with brass rod & high density plastic ball, complete all as specified and directed.

S&F 20 mm PVC Nipple suitable for HDPE Water tank (Min Wt 15mm-38gms) complete all as specified and directed.

32mm dia PVC waste pipe for wash hand basin, urinal and kitchen sinks, fixed in repair, complete all as specified and directed.

S & F Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe including brackets, complete all as specified and directed.

S&F in repair urinal spreader of PTMT, any colour suitable for 15 mm bore pipe and fixed with stainless steel screws with PVC rawl plug complete all as specified and directed.

20mm thick cement plaster in cement mortar 1:4 on brick or concrete surface finished even and smooth incl fibre reinforcement sheet using WPC liquid as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified & directed. ((Note: Water Proofing compound shall be measured and paid for separately)

Material and labour for preparation of surfaces and apply first of coat Fiber reinforced elastomeric liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibers with Sun Reflective Index (SRI) of 100-110, having minimum elongation of 300%, tensile strength of 2.9 Mpa and shall have cracks bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic pressure & reduce surface temperature upto 10 degree Celsius with 33% dilution of priming coat. Laying of fiber mesh of 0.3mm thickness weave in leno pattern having 45 gsm/sqm and pasting it properly with overlap of 50mm and allow it to dry. Apply second of undiluted coat @ 0.45 ltr/sqm. Apply third and final coat undiluted @0.45ltr/sqm complete application to be done by the manufacture or authorised applicator complete all as specified and directed by Engr-in-Charge.

M&L false ceiling of 8mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders of standard galvanised sections in a grid size of 600x600mm, including taking down existing ceiling board & grid work etc of any type/pattern complete all as specified and directed.

Material and labour for preparation of old painted surface of steel of any discription exc 10cm width or girth and providing two coat of synthetic enamel paint, complete all as specified and directed.

Material and labour for Rolled mild steel work in trusses including special shaped washer etc. complete using ERW or induction butt welded angle or channel conforming to IS 1161- 1998 or latest grade YSt 240, complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in sub base finished complete all as specified and directed.

M&L for Sand filling under floors or in foundation in layers of 40mm thick including watering and consolidation complete all as specified and directed.

M&L for 60mm thick factory made machine pressed precast concrete inter locking paver block of M-35 Grade any shape and size conforming to ISI 15658-2006 , with grey cement and pigment approved by GE and joints filled with sand complete all as specified and directed.

S&F stainless steel Soap dish fixed to plugs chromium plated brass screws, complete all as specified and directed.

M&L for LLDPE 3000 Ltr Septic Tank designed to carry sewage and sullage water, excavation and earth work in ay type of soil, PCC 1:4:8 type D2 below foundation, vent shaft, connection etc complete all as specified and directed.

Soakage wells(3.0 M dia X 4.5 M effective depth) excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size, complete all as specified and shown on drawing No CEPZ-TD/013/13.

Soakage wells(3.6 M dia X 4.5 M effective depth) excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size, complete all as specified and shown on drawing No CEPZ-TD/013/13.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including unscrewing from board fitting and fixture such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody for reuse if serviceable or for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

All as per Srl item No 105 here-in-before for one 15/16 amp socket point with 3x2.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor.

All as per Ser item No 105 here-in-before but for one 5/6 Amp socket outlet point on same board controlled by one switch 5 Amp one way.

All as per Ser item No 105 here-in-before but for one 5/6 Amp socket outlet point on independent board controlled by one switch 5 Amp one way.

All as per Srl item No 105 here-in-before for one 15/16 amp socket point with 3x2.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor.

S&F switch piano flush button single pole one way 5/6 Amp 240 volts complete all as specified and as directed.

Switch piano flush button with shutters single pole one way 15/16 Amp 240 volts complete all as specified and as directed.

Socket outlet 2 in 1, 3 pin, 5/6 Amps, flush type with shutters, 240 volts complete all as specified and as directed.

Socket outlet 2 in 1, 6 pin, 6/16 Amp flush type, 240 volts complete all as specified and as directed.

S&F switch flush type 15/16 Amp, 240 volts complete all as specified and as directed.

Ceiling rose 3 terminal bakelite 65mm x50mm surface type, PVC/ Polycarbonate, isolated body, complete all as specified and directed.

S&F step type electronic fan regulator flush type socket on the existing phenolic laminated sheet etc not less than 100W complete all as specified and directed

Lamp holder, PVC/ Polycarbonate type with back plate, straight/ angular suitable for batten fittings including LED lamp 15W, 230V, complete all as specified and directed.

S&F 20W surface / wall mounted box type batten LED fitting having polycarbonate housing and diffuser and integrated electronic driver with system luminous efficacy ≥ 100 lumens/Watt operating voltage 140V-240V complete with all accessories internally prewired and including connecting up with suitable size flexible copper conductor cable from ceiling rose to connector of LED fitting complete all as specified and directed.

All as per ser item No 118 but for 10 W LED batten fitting 2 feet long.

LED wall security light of 35 Watt, 230 Volts having pressure die cast aluminium housing with system lumens efficacy≥100 lumen/W, IP65 protection, IK07 rating, inbuilt electronic driver with PF>0.95 incl GI bracket of suitable dia bend to shape and fixed to wall by means of clamps or nuts bolts and connecting up with three core twisted flexible copper conductor cable complete all as specified and directed.

S&F LED building lights of 60Watt luminaire having pressure die cast aluminium housing with PC diffuser with high efficacy≥100 lumen/W, IP65 protection, IK07 rating, inbuilt electronic driver with PF>0.95 with GI bracket of suitable dia bend to shape and fixed to wall or roofs by means of clamps or nuts bolts and connecting up with three core twisted flexible copper conductor cable in flexible conduit pipe, complete all as specified and directed.

S&F surface mounted, bulk head LED luminaire 10 W with and integrated electronic driver with system luminous efficacy ≥ 100 lumens/Watt operating voltage 140V-240V, IP 65 protection complete with all accessories internally prewired and including connecting up with suitable size flexible copper conductor cable from ceiling rose to connector of LED fitting complete all as specified and directed.

S&F in replacement of intenso LXS LED batten 20 Watt, of size not less than 3' 7'', 6500K, 230 Volts, PF-0.95, CRI-80, life 25000 buring hours, wall mounted, complete with all accessories internally prewired and including connecting up with suitable size twisted flexible copper conductor cable 3 core, complete all as specified and directed.

S&F of exhaust fan 250mm sweep, copper wounded sturdy engineering plastic body fan AC single phase 230/240 V having 1200 ± 50 RPM including louvers shutter and fixed with grounting nut & bolts and making the suitable hole of sutiable size by breaking the existing wall and making good the disturbed surface by plastering and matching with existing specifications with suitable finishes as per site requirement complete all all as specified and directed.

MCB DB, TPN, 4 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 53 and IK 09 rating having fully insulated copper busbar, neutral bar, earth bar and cable ties for cable management including polyuthrene gasket complete complete in all respect flushed in wall including cutting chases on wall for taking out old unsv DB and fixing of new DB and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed.

S&F MCB SP 240V, 50Hz of rating 6 to 32 Amp, 'B' curve using suitable size copper thimbles complete all as specified and directed.

S&F MCB SPN 240V, 50Hz of rating 40 Amp, 'B' curve using suitable size copper thimbles complete all as specified and directed.

Supply and installation of the electric water heater, storage type ABS body type with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc including steel braided flexible connection for pipe of size 15mm bore with GI hexagonal adopters/Nuts on both sides for inlet ( cold water supply) and out let (hot water supply), provision of wall mountingarrangement , mounted on wall with suitable sige of anchor bolts, making connection including testing complete all as specified and directed.

S&F heavy duty 300mm sweep, double bearing copper wounded metallic exhaust fan AC single phase 230/240 V having 1400 ± 50 RPM and power consumption not more thann 45 watt with minimum air delivery 700 CMH including box type square shaped metallic louvers made out of powder coaed CRCA sheet of thickness not less than 01mm alonwith aluminium flaps and fixed with grouting nut & bolts and making the suitable hole of suitable size by breaking the existing wall and making good the disturbed surface by plastering and matching with existing specifications with suitable finishes as per site requirement complete all all as specified and directed.

S&F LED lamp 12 watt, 230 volts retfrofit suitable for any type of lamp holder complete all as specified and directed.

Replacement of MCB DB, SPN, 8 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 54 and IK 09 rating having fully insulated copper busbar of rating 100 Amps, insulated neutral bar, earth bar and cable ties for cable management including polyuthrene gasket complete complete in all respect flushed in wall including cutting chases on wall for taking out old unsv DB and fixing of new DB and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface andpainting the plastered surface with same colour, complete all as specified and directed.

1100 volt grade heavy duty XLPE cable with PVC insulated aluminium conductor served with inner sheathing of PVC tape armoured with galvanized steel strip or wire and overall PVC sheathed of size 16 sqmm nominal cross section 2.0 core laid in trenches, fixed to pole or passing through pipes including all necessary clamps, nuts, bolts washers incl taking down old unsv cable, complete all as specified and directed. Note- Earth work and protection work shall be measured and paid for separately under respective items of BOQ.

Supply, laying and testing XLPE insulated, screened, PVC beded galvanized steel strip or wire armoured, electric cable heavy duty 1100 volts grade wirh stranded aluminium conductor of size 10 Sqmm 2 core including making good all distributed wall surfaces/ flooring/tilling/ road to match with existing specifications complete all as specified and directed.

M&L for sand filling in trenches as cushion to under ground cables 8 cm thick before laying the cable and 15 cm thick when cables are laid and tested complete all as specified and directed. Note: Only punned thickness i.e 18cm shall be measured and paid.

M&L for Sub class ‘B’ bricks (fly ash bricks) old size laid dry, flat over the cable abutting each other, length of cable equal to width of brick complete all as specified and directed.

M&L for Galvanised Iron tubing light grade 40mm bore with fittings laid for protection of cable under road crossing/ fixed to walls or pole complete all as specified and as directed. Note: Clamps for fixing pipe, nuts, bolts washers etc shall be measured and paid for separately.

Earthing complete in repair with galvanized steel earth plate electrode 60cm x 60cm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 mtr deep below GL with top edge of the plate not less than 1.5 mtr below normal GL and connected to earth plate surrounded by 15 cm thick packed layers of charcoal dust and common salt and connected to earth lead GI wire 4mm dia by means of bolts, nuts, check nuts and washers of galvd iron or steel and thimbles and other end of the earth wire connected to DB and protected by galvanised iron or steel pipe light grade 15 mm bore and water pipe 20mm bore GI light grade with funnel and wire mesh, including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover and all as shown in electrical plate No 3 of MES schedule Pt I of 2009. Note : RCC pit cover shall be pre-cast of RCC (1:2:4) type B-I , 80mm thick reinforced with XPM weighting not less than 4 KG/sqmm in lieu of CI cover.

Please Enable Macros to View BoQ information