85925 SPL REPAIRS TO BLDG NO. T-43 AT ALC AND SINGLE OFFRS ACCN BLDG NO. NP-20 AT AICTS PUNE AND PROVN OF AREA DRAINAGE FROM BLDG NO. NP-94 TO NP-113 AT AICTS UNDER GE (SOUTH) PUNE

Amount

B&R PORTION M&L for earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated all kinds of soil and disposal of surplus excavated soil as directed, within a lead of 50 m complete all as specified and as directed.

Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out of the excavated ordinary rock and disposal of surplus excavated material as directed, within a lead of 50 m complete all as specified and directed. (Note for Ser. Item No. 1.00 & 2.00 : Proper care shall be taken by Contractor while execution of these items. Any type of cable and pipe line if damaged shall be made good and serviceable by the contractor within 24 Hrs at his own cost. Nothing extra shall be payable to contractor on this account. Contractor's claim of whatsoever nature on this account shall not be entertained.)

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for Brickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for cement concrete 1:3:6 type C-1 using 20mm graded aggregate, as in coping, kineerlers, kerbs etc including necessary form work all as specified and directed.

M&L for Cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in surface channels and drains, inside bed of drain, including forms, moulds, mitred etc finish surface even and smooth without using extra cement complete all as specified and as directed.

M&L for 600 mm bore reinforced concrete pipes, class NP3, laid and jointed complete with collars complete all as specified and as directed.

M&L for 450 mm bore reinforced concrete pipes, class NP3, laid and jointed complete with collars complete all as specified and as directed.

M & L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 600 mm bore complete all as specified and as directed.

M & L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 450 mm bore complete all as specified and as directed.

M&L for 100 mm thick Cement concrete 1:2:4 type B1, (using 20 mm graded stone aggregate) as in flooring/ Plinth protection finish even & smooth without using extra cement complete all as specified and as directed.

M&L for Precast cement concrete 1:2:4 type B1, (Using 20 mm graded stone aggregate) as in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and as directed.

M & L for RCC 1:1.5:3, Type A1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in pilasters and buttresses complete all as specified and as directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work exceeding 200mm thick flat (Horizontal or sloping) complete all as specified and as directed.

M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F for Framed work such as grills, grating etc, with ends of bars shouldered and/or riveted, of forged in to spikes, framed guard bars, walking ways, railings and similar work conforming to Fe.290 Gde-E-165 complete all as specified and as directed.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removing excavated material to a distance exc 1.5 Km but n exc. 5 Km and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

M&L for extra for forming fair finished drain or channel exc 55 cm but not exc 85 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed.

M&L for plain cement concrete (1:2:4) type B1, (using 20 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

Dismantling of Asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings complete all as specified and directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. (Note :- Colour and pattern of Galvalume sheet shall be as approved by GE)

S& F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. (Note :- Colour and pattern of Galvalume sheet shall be as approved by GE)

M & L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but not exc 20 cm girth in stone / concrete wall complete all as specified and directed.

M & L for Providing, cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in filleting, roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

S & F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 (Gde E-165) complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion, embedded in concrete/ brick mansonry at any depth and making good disturbed ground complete all as specified and directed.

S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe-290 (Gde E 165) complete all as specified and directed.

M & L for Cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons , dado etc laid bedded pointed in any mortar including cement mortar bedding & removing rubbish off the premises complete all as specified and directed.

Demolition of unreinforced cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M & L for 75 mm thick PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in flooring / plinth protection finishing surface even & smooth without using extra cement complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B0 (using 12.5mm graded stone aggregates) as in floor levelling course complete all as specified and directed.

M&L for dark shade Vitrified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 20mm thick screed bed in CM (1:6) complete all as specified and directed. (NOTE : Colour / Shade of the tile shall be approved by GE in consulation with Users.)

M & L for Glazed coloured ceramic tiles in vertical surface 300mm x 600mm x 7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with and over 10 mm thick backing coat in CM (1:4) including triangular filleting in CM (1:4) complete all as specified and directed. (NOTE : Colour of the tile shall be approved by GE in consulation with Users.)

M & L for Machine cut kota stone slab flooring 20-25mm thick with and over 20 mm thick cement screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.

M&L for pre-polished machine cut kota stone slab as in riser of steps, skirting, dado and pillar, set and jointed in neat cement slurry and pointed in white or colour cement to match with and over 10 mm thick backing coat in CM (1:4) including triangular filleting in CM (1:4) complete all as specified and directed.

Taking down cement plaster on brick/ block walling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for 15mm thick rendering in CM 1:6 over brick / concrete wall surfaces trowelled to even & smooth w/o using extra cement for includng sagol finish for internal wall surfaces complete all as specified and as directed.

M&L for 15mm thick rendering in CM 1:4 over brick / concrete wall surfaces trowelled to even & smooth w/o using extra cement for external wall surfaces complete all as specified and as directed.

M & L for Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work over and including 3 mm thick wall care putty complete all as specified and directed. (NOTE : Shade / Colour shall be approved by GE in consulation with Users.)

M & L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over primer and including 2 mm thick wall care putty complete all as specified and directed. (NOTE : Colour shall be approved by GE in consulation with Users.)

M & L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. (NOTE : Colour / Shade shall be approved by GE in consulation with Users.)

Demolition of brick work or stone/ boulders masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work and precast concrete articles complete all as specified and as directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

M&L for Gypsum ceiling board for ceiling, 600mm x 600mm x 12 mm thick in size, of approved brand/make, laid over and including Anodised aluminium snap grid frame work of size 605mm x 605mm for false ceiling including Hangers 6 mm dia G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long including making niches for fans/light complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each complete all as specified and as directed.

Taking down angle iron/ wooden chowkats or frames with shutters (without taking off shutters from the frame) exc. 1.5 sqm but not exc. 4sqm each complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F three track sliding window with two or more shutter witth 4 mm thick tinted glass , one shutter of stainless steel wire cloth 0.36 mm nominal dia & 1.18 mm width aperture for mosquito proofing with good quality bearing, handle lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified directed by Engr-in-Charge. (a) Bottom frame 20620 (b) Top frame & Verrtical 20621 (c) Handle (side) 20606 (d) Shutter inter lock 20724 (e) Shutter top & Bottom 20844 (f) Glazing Clip 19352

S&F ventiltors/ louvers with partially guaged shutter using 5 mm thick x 10 cm wide frosted glass strips and stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aparture for mosquito proofing and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as directed. (a) SP 20048 (b) Glazing clips 19352

S & F aluminium single leaf door on pivots alongwith hydraulic door closer (Aluminiium extruded section), door lock, handles, 5 mm thick plain glass in top and 12 mm thick prelaminated partical board (both side laminated) in bottom panel, fixed with rubber beading and glazing clips and using aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified directed by Engr-in-Charge. (a) Rectangular tube 14005 (b) Shutter Verrtical 19501 (c) Shutter top rail 19503 (d) Shutter middle rail 20060 (e) Shutter bottom rail 19511 (f) Glazing Clip 19352

S & F mild steel framed work such as grills, framed guard bars with ornamental design etc and similar work confirming to Fe-290, grade E-165 complete all as specified and as directed.

M & L for applying two coats of synthetic enamel paint over one coat of red oxide or zinc chrome primer over surfaces of steel or iron of any description exc 10 cm width or girth including preperation of new or old or previously untreated surfaces complete all as specified and as directed.

S&F Pressed steel frames for doors of size 105mm x 60 mm with one or more rebates including necessary fixing lugs. hinges, lock strike plate, etc., and filling of hollow of frame with PCC 1:2:4 type B0 complete all as specified and as directed.

S&F 35 mm thick Plain framed, panelled shutter (two panel) second class hard wood with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated of any number of panel complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts or extruded etc length of bolt 300mm complete all as specified and directed.

Cutting holes in stone masonry walls built in cement mortar for inserting hold fasts measured from face of jambs into wall exc. one brick but not exc. two bricks & making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and as directed.

S&F mild steel flat iron as in hold fasts fitted to chowkats with nails & welded to angle iron frames complete all as specified and as directed.

M&L for preparation of new or previously untreated wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for Mirror polishing to existing kota stone flooring to give high gloss finish complete all as directed by Engr-in-Charge.

Taking down existing aluminium partition complete all as directed by Engr-in-Charge.

M & L for anodised aluminium frame Powder Coating (minimum thickness of powder coating 50 micron) for partition with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F Prelaminated particle board 12 mm thick, exterior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws complete all as specified and as directed.

S&F 4 mm thick tinted glass, ordinary quality and glazing with aluminium beading in square exc 0.5 sqm in each pane for partition complete all as specified and as directed.

Dismantiling structural steel work including doors,gates but excluding framed trusses etc complete all as specified and as directed.

M&L for MS structural steel work, framed as in trusses, purlins, rafter, post etc. conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plate, gusset plate and also erecting in true position complete all as specified and as directed.

M&L for preparation of old painted Steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down /cutting steel windows shutter by means of gas cutter w/o disturbing of sofit/jambs/cills etc of any description n exc 1.5 sqm (without taking off guard bar) complete all as specified and as directed.

S&F false ceiling with 9 to 9.5 mm thick glass fibre reinforced Gypsum ceiling tiles of size 595mm X 595 mm, prima fine fissured micro look white coloured laid over including grid work 600mm x 600 mm using GI powder coated “T:” section grid as Main 'T' 38 X25 mm , cross 'T" 25 x 25 mm and wall angle 25 x 25 mm grid and 6 mm dia GI suspension wire etc complete all as specified and directed.

M&L for colour shade vitrified ceramic tiles 8-10mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exc 1 sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 20 mm thick screed bed in cement sand mortar 1:6 for laying floor finished complete all as specified and directed. (NOTE : Colour / shade of the tile shall be approved by GE in consulation with Users.)

M & L for non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangle) area of each tiles n.exc 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with and over 20 mm thick screed bed in CM 1:4 complete all as specified and as directed. (NOTE : Colour of the tile shall be approved by GE in consulation with Users.)

S&F in repairs vitreous china wash down water closet pan, 'Pedestal' white, including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinge devices including PVC low level flushing cistern 10 Ltr capacity with all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.

S & F in repair WHB round bowl type counter top of size 520mm x450 mm including CP waste coupling with waste pipe complete fittings coloured fixed in 18 mm thick polished granite 900mm x 600 mm size all as specified and directed. (Note : Granite top shall be measured and paid seperatly).

S&F in repairs long body Bib cock with wall Flange and Aerator suitable for 15mm bore dia of pipe, chromium plated , cast copper alloy with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and as directed.

S&F for repairs 15 mm bore dia Angular Stop cock with wall Flange Fancy type, cast copper alloy, chromium plated with long shank and cup (concealed type) , screwed down, high pressure, with cruch or butterfly handle, screwed down, screwed for iron pipe or for union and fixed complete all as specified and as directed. (Note for Ser. Item No. 78.00 & 79.00 above : Sample / make of bib cock / angular stop cock shall be got approved from GE prior procurement & execution of work.)

S&F CP wall mixer 3 in 1 including telephone shower for 15mm bore of pipe complete all as specified and as directed. (Note : Make / Sample of CP wall mixer shall be got approved by contractor from GE prior procurement & execution of Work)

S&F in repairs CP Pillar taps long neck with aerator screwed for iron pipe and fixed for 15mm bore pipe complete all as specified and as directed.

S&F in repair CP Sink Cock with swinging casted spout with aerator for 15mm bore pipe complete all as specified and as directed.

S&F 2 way CP bib cock with wall flange suitable for 15mm bore pipe complete all as specified and as directed.

S&F PVC box type cabinet of size 45cm x 35cm x 10 cm with 3mm thick mirror mounted on shutter with PVC shelves inside fixed in existing opening of wooden cabinet including taking down existing unserviceable cabinet of any description complete all as specified and as directed.

S&F repairs 20 mm bore dia Gun-metal, globe or gate valves cast copper, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repairs stainless steel double soap dish complete all as specified and as directed.

S&F in repairs stainless steel Towel rack with hook (24") complete all as specified and as directed.

S&F in repairs stainless steel Paper Holder with Lid complete all as specified and as directed.

S&F in repairs glass coner round (9" x 9") with stainless steel railing complete all as specified and as directed.

S&F for repairs Brass chromium plated shower rose 100 dia with 235 mm long arm with or without swivel joints, including fixing to steel pipe or union complete all as specified and as directed.

S&F in repairs stainless steel Robe Hook (khuti) with 5 Hook complete all as specified and as directed.

S & F in repairs towel ring CP complete all as specified and directed.

S&F in repair health faucet 15 mm bore and flexible tube 1.00 mtr long fixed to plugs with chromium plated brass screw with two in one chroimium plated bib tap complete all as specified and as directed.

S&F 100 mm round Stainless steel Grating with waste hole complete all as specified and as directed.

S&F in 32/40 mm bore PVC flexible waste pipe connecting to waste fitting for WHB / Sink complete all as specified and as directed.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, bowl size 560 mm x 460 mm including coupling complete all as specified and directed.

S&F in repairs, stainless steel plate rack of size 36 inch x 39 inch x 10 inch, made out of 0.63mm thick stainless steel sheet (Grade SS 304), S S screws and round pipe, fixed to wall with screws complete all as specified and as directed.

S & F PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and as directed.

Dismantling of wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and as directed.

M&L for Granite (of any type) 18-20 mm thick machine cut, table top (counter top WHB ) bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone with and including 20 mm thick cement screed bed in cement mortar 1:4 grinding and polishing complete all as specified and directed.

M&L for 18-20 mm thick machine cut & polished granite slab, in skirting , dado laid over screed bedded and jointed with grey cement slurry and pointed with admixture of pigment to match the shade of granite including laying over 15 mm thick rendering in CM 1:4 complete all as specified and directed.

Labour only rounding of edges of granite stone slabs , as in Wash hand basin slab and other similar situations complete all as specified and as directed.

S & F Machine cut cuddappa stone 30 to 40 mm thick one side polished as in kitchen platform and partition wall of slab etc bedded & jointed in CM (1 : 3) including taking down existing stone slab etc. complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and as directed.

S & F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc. including all fittings fixed to walls and ceilings or laid in floors complete all as specified and as directed.

S & F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc. including all fittings, fixed to walls and ceilings or laid in floors complete all as specified and as directed.

S&F rotational moulded high density poly-ethylene water storage tanks ISI Marked (cylindrical vertical with closed top) of capacity1000 litre, hoisted and fixed in position including dismantling existing unserviceable water tank and removing to store complete all as specified and directed.

Disconnecting existing tanks exc 500 & not exc 1000 litres capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and refixing in position complete all as specified and directed.

S&F ball valves suitable for 20 mm bore iron pipe high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for iron pipe and fixed (minimum weight 455 gms) complete all as specified and directed.

Demolition and breaking up 100/ 75 mm dia drain pipe (salt glazed ware, AC or PVC ) set in cement complete all as specified and as directed.

S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall / ceiling or laid in trenches pipe of following size :

(a) 110 mm bore

(b) 75 mm bore

S&F in repairs PVC (SWR) bends any radius 110 mm bore complete all as specified and as directed.

S&F in repairs PVC (SWR) bends any radius 75 mm bore complete all as specified and as directed.

S&F PVC (SWR) vent cowl 100 mm bore complete all as specified and as directed.

S&F PVC SWR junction , (Single 'T') equal or unequal of 110 mm bore complete all as specified and as directed.

S&F in replacement for PVC (SWR) gully trap 125/100mm, setting and jointing with solvent cement complete all as specified and as directed.

S&F in replacement PVC (SWR) floor trap, dia of outlet 75mm, plain with grating including jointing with solvent cement complete all as specified and as directed.

M&L for 110mm PVC (SWR) WC connector with lip ring complete all as specified and as directed.

M&L for 75 mm PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and as directed.

M&L for precast cement concrete solid block masonry exc 10cm width with solid block of PCC (1:5:8) Gde D-5 and setting in CM 1:6 complete all as specified and as directed.

M&L for Pre-cast cement concrete masonry not exceeding 10cm width with solid block PCC 1:5:8 Gde D-5 and setting in cement mortar 1:4 complete all as specified and as directed.

M&L for rendering 25 mm thick (Avg) in two layers on stone masonry surfaces or on other than fair faces of brick/PCC block masonry of walls (first layer 15 mm thick in cement mortar 1:6 and second layer 10 mm thick in CM 1:4 mixed with WPC 3% by wt of cement) and finishing the surface even and smooth without using extra cement complete all as specified and directed. (Note :- Supply only WPC shall be measured and paid separately under respective item)

M&L for rendering 25 mm (Avg) thick in two layers on stone masonry surfaces or on other than fair faces of brick/PCC block masonry of walls (first layer 15mm thick in cement mortar 1:6 and second layer 10 mm thick in CM 1:6) and finishing the surface even and smooth without using extra cement complete all as specified and directed.

Supply only Integral water proofing compound of approved make complete all as specified and as directed.

M&L for complete removal of existing treatment on old wall plaster surface and applying two coats of distemper oil emulsion with and over 3 mm thick wall putty complete all as specified and directed.

Taking down shutters of any description exceeding 1 sqm but not exc 2 sqm each refxing in other frame (New) complete all as specified and directed.

S&F Pressed steel frame 125mm x 60 mm for doors with one or more rebates including necessary fixing lungs, hinges, lockstrick plate etc. and filling of hallow of frame with cement concrete 1:2:4 type B0 complete all as specified and directed.

S&F for 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both faces is covered with decorative face 1.5 mm thick veneer with lapping all around of the shutter/frame to match complete all as specified and directed.

S&F 100 mm long medium weight mild steel butt hinges with galvanised mild steel hinges pin and fixed complete all as specified and as directed.

S&F 35 mm thick second Class hard wood factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Pt-I Section 8, clause 8.24 (a) complete all as specified and directed.

S&F Soild PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per SSR Pt-I specifications complete all as specified and directed.

S & F factory made solid PVC moulded door shutters 28 to 30 mm thick (stiles) with 2,4 or 6 raised panels design with 2mm thick moulded PVC sheet on front face & 2 mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drgs with particle board core etc.including 3mm thick, 1st Class HW (TW) beading all around on edging and welding all as specified and directed by Engr-in-Charge .

S&F 200 mm long aluminium, anodised, barrel tower bolts of extruded section ISI marked complete all as specified and directed.

S&F 150 mm long extruded aluminium alloy handles, caste type anodised ISI marked complete all as specified and directed.

S&F butt hinges 100 mm long extruded aluminium alloy with galvanised mild steel hinges pin, anodised and fixed, type C-21 complete all as specified and as directed.

S&F 150 mm size Hasp staple Aluminium anodised with mild steel hinges pin including bolt to hinges plate fixed with screw. complete all as specified and directed.

S &F 2nd class hard wood plain, solid chowkat and frames, rebated on solid, rounded or chamfered put together with glue pinned at joint complete all as specified and as directed.

S&F of 18/19mm thick Block Board, Grade I quality exterior grade type with decorative face veneer on both faces including lapping of edges fixed with screws to timber frame work as in CB partition and shelf and other works complete all as spd and as directed.

S&F of 18/19mm thick Block Board , grade I quality exterior grade type with decorative face veneer on one faces including lapping of edges fixed with screws to timber frame work as in CB partition and shelf and other works complete all as spd and as directed.

S&F continuous Piano hinges, mild steel bright finished or electro galvanised width of flap 30 mm complete all as specified and as directed.

S&F of Magnet catches and striking plate complete all as specified and as directed.

S&F 100 mm stainless steel handle for kitchen cabinet and drawer complete all as specified and directed.

S&F 6 mm thick plywood grade BWP type BB, fixed with screw to timber frame work complete all as specified and as directed.

S&F 300 mm Mild Steel spring for doors, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F in repairs 25/20mm dia stainless steel fancy type heavy curtain rod medium grade including fancy type bracket stops roller etc complete all as specified and directed.

S&F stainless steel fancy type curtain rod caps/ side bulbs, etc to be fitted in 25/20mm curtain rod pipe complete all as specified and directed.

S&F in repair 20 mm dia Tubular towel rail brass chromium plated D type, 60 cm long between flange complete all as specified and as directed.

S&F Galvanized mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed.

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate), as in roof kerbs , rounded chamfered on edges , in lintel upto 1.5 m clear span, cill, steps, seismic and other similar bands, plinth courses string courses, lacing courses, copings kneelers, apex including weathering, slightly rounded or chemfered angles and throating etc. including necessary form work complete all as specified and directed.

Use and waste for formwork to rough finish surface of concrete to sides and soffits of floor or roof beams, beam haunchings, girders, brressummers, lintels, cantilevers, shalves including sup-ports, over hanges, etc. also splays between floors and beams complete all as specified and directed.

M&L for mild steel TMT bar 8 mm dia and cut to length, bent to shape required including bending or hooking ends and binding with and including mild steel wire (annealed)not less than 0.9 mm dia complete as in reinforcement complete all as specified and as directed.

S&F aluminium powder coated partition using following sections of `Jindal Aluminum Ltd ' or equivalent in specified makes, as approved with 12 mm thick both side prelaminated particle board interior grade of approved colour in bottom panel and 5mm thick plain glass in top panel fixed with aluminium clips, beads, rubber gaskets etc., centre to centre distance of vertical member shall not exceeding 1mtr and horizontal member shall not exceeding 1.10 mtr as directed fixing to stone masonary walls with & including Ist class teak wood plugs of size 20mmX20mm at an interval of 0.5m alround the track including drilling holes etc, complete all as specified and directed:- (a) SP – 20048 (b) DP - 20047 (c) Glazing clips - 19352

S&F aluminium powder coated single leaf door sliding door shutter with lock, handles, 5mm thick glass panel etc. complete, fixed with rubber beading glazing clips manufactured by using following sections of `Jindal Aluminum Ltd ' or equivalent in specified makes, as approved complete all as specified and directed by Engineer-in-Charge:- (a) Rectangular tube 14005 (b) Shutter vertical 19503 (c) Shutter top rail 19503 (d) Shutter Middle rail 060 (e) Shutter Bottom rail 19511 (f) Glazing clips 19352

M&L for hammer dressing on existing wall with maximum depression from a straight edge held against the surface not exceeding 20mm dressing complete all as specifed and directed.

E&M PORTION Taking down carefully copper/aluminium point wiring light/fan/ socket /power complete (fittings such as switches,ceiling roses,pendents,regulators etc to be measured and paid for separately), removing the material and including making good the distrubed surfaces of the wall flooring ceiling etc to match the existing surface all as specified and directed by Engr-in-Charge.

M&L for Point wiring complete with 1.5 sqmm (nominal area) confirming IS:3419-1988 PVC insulated PVC unsheathed multistranded copper condutor single core cable 1100 volts grade, FRLSH, ISI marked drawn through and including heavy duty non metalic PVC conduit, ISI marked, not less than 20 mm dia of thickness 1.8 mm concealed in wall, roof, etc, with all connected fittings including pressed steel terminal boxes and modular cover plates suitable for mounting switches, sockets etc and including PVC insulated and unsheathed multistranded single core copper conductor cable of size 1.5 sqmm green in colour as in earth continuity conductor connected to common earth dolly and all metal parts as required at site including cutting chiselling on wall, roof as per site requirement and also making good surfaces and matching with the existing surface finishes for the following:-

(a) One light/Fan point controlled by one way switch 6 Amps 240 volts

(b) One 3 pin socket outlet, 5 Amps on the same board

(c) One 3 pin 6 Amps socket out let point on independent board.

(d) One bell / buzzer point controlled by one bell push

M&L for Point wiring complete with 2.5 sqmm (nominal area) confirming IS:3419-1988 PVC insulated PVC unsheathed multistranded copper condutor single core cable 1100 volts grade, FRLSH, ISI marked drawn through and including heavy duty non metalic PVC conduit, ISI marked, not less than 20 mm dia of thickness 1.8 mm concealed in wall, roof, etc, with all connected fittings including pressed steel terminal boxes and modular plates suitable for mounting switches, sockets etc and including PVC insulated and unsheathed multistranded single core copper conductor cable of size 2.5 sqmm green in colour as in earth continuity conductor connected to common earth dolly and all metal parts as required at site including cutting chiselling on wall, roof as per site requirement and making good surfaces and matching with the existing surface finishes complete all as specified and directed.

Taking down carefully sub main wiring of any type and size and making good disturbed surfaces to match with existing finishes complete all as specified and as directed.

M&L for Sub main wiring with PVC insulated FRLSH grade cable LT 1100 Volts grade PVC insulated unsheathed, multistranded with stranded copper conductor drawn through including concealed new PVC Conduit of suitable size in any type of wall, roof, etc, with all connected fittings including pressed steel terminal boxes suitable all standard accessories and make good to match with the existing surfaces after completion alongwith one contineous earth wire and connected to common earth complete all as specified for following sizes of cable :-

(a) 2 x 4 sqmm with one contineous earth wire of size 4.0 sqmm (Note : Two runs of 4 sqmm cable and one run of 4.0 sqmm earth wire and PVC Conduit will be measured as one unit length)

(b) 2 x 2.5 sq mm with one contineous earth wire of size 2.5 sqmm (Note : Two runs of 2.5 sq mm cable and one run of 2.5 sq mm earth wire and PVC Conduit will be measured as one unit length)

S&F in replacement of modular switch 6 Amps one way, 1 module all as specified and directed.

S & F in replacement of modular socket 6A-2/3 pin , 2 module all as specified and dircted.

S&F in replacement of modular switch 1 way 16A, 1 module with neon indicator complete all as specified and directed.

S&F in replacement of Modular socket 6/16A 2/3 Pin 2 Module complete all as specified and directed.

S&F in replacement of modular step type fan regulator 120W, 2 module complete all as specified and directed.

S&F ceiling rose surface shall comply with IS :371-1979 Bakelite 60 x 25 mm two to three terminals plates and of outside diameter not less than 63.5mm complete all as specified and as directed.

S&F in replacement of LED light fittings 20W 220V AC 4 feet tube light fitting extruded polycarbonate housing and robust construction LED lighting with high lumen output environmental friendly energy efficient CRI-6500K P.F not less than 0.95 fixed on PVC square for mounting the fitting & electrically connecting with three core 23/0.0076 PVC insulated multi strand copper flexible cable from ceiling rose to light fitting and for earthing complete all as specified and directed.

S&F in replacement Surface mounted 10W 220V AC 2 feet tube light fitting extruded polycarbonate housing and robust construction LED lighting with high lumen output environmental friendly energy efficient CRI-6500K P.F not less than 0.95 & electrically connecting with three core 23/0.0076 PVC insulated multi strand copper flexible cable from ceiling rose to light fitting and for earthing complete all as specified and directed.

S&F in replacement of recess mounted 2' x 2' LED Panel lights 40 W LED 5700K, 240Volts and glare free symmetrical illumination suitable for Armstrong/Grid ceiling, Environmental friendly, new generation, energy saving, high power LED as a light source with clear diffuser and separate replaceable electronic driver including connecting with twin core wire and also matching to the adjacent ceiling surfaces carefully all as specified and directed. (Note: The quoted price shall include the cost of Light and its driver.)

S&F in replacement of 30 watt LED building security light IP-65 protection made up of die cast aluminium housing with lens covered high power LED as lighting source and including suitable GI medium grade bracket complete all as specified and directed by Engr-in-charge. (Note: Quoted rate shall be deemed including of LED fitting and GI medium grade bracket.)

Taking down the ceiling fan/Exhuast fan carefully and cleaning/Servicing and rewinding of the fan if any repairs/replacing of parts required complete including painting the fan with enamel spray paint white colored and fixing back the fan with fixing accessoires required at site complete all as specified and as directed.

M&L for Earthing complete with galvanised steel earth plate electrode 600 mmx600 mmx6mm thick burried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters deep below normal ground level and filled with alternate layers of charcoal and salt with 15 cm thick layer, connected to galvanised wire earth lead 4 mm dia by means of bolts, nuts, check nuts and washers made of galvanised iron, 20 mm bore GI pipe (med grade) for watering, 15 mm bore GI pipe (light grade) for protection of earth lead, including necessary earth work in any type of soil, Earth pit of PCC (1:3:6) type C1 and precast earth pit cover made of RCC (1:11/2:3) type A1 duly reinforced with 8 mm dia TMT bar @ 150 mm c/c both ways, one lifting handle made of 8 mm dia TMT bar embedded in cover slab complete all as specified and as shown in Electrical Plate No 3 of SSR Part-I including testing on complete all as specified and directed by EIC.

Taking down unserviceable MCCB's, MCCB DB/MCB DB along with wooden boards of any size complete and making good disturbed surface complete all as specified and as directed.

Supply and fixing in replacement factory made epoxy powder coated Distribution Board TP & N 4 way double door (VTPN MCCB DB) MCCB as In comer, with metal door (IP-43 protection) fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with Knockout complete all as specified and as directed. (Note : MCCBs will be measured and paid seperately under respective BOQ item in the schedule)

S&F in replacement MCB DB 08 way SPN double door sheet metal enclosure factory made suitable for MCB DB's 240 volts with 200 amp rated busbar, neutral & earthing link bar,surface mounting complete including taking down the existing DB of any type & size alongwith its accessories by removing from existing circuits and refixing the new DBs and circuits complete as reqd at site as directed by the Engr-in-Charge. (Note - MCBs will be measured & paid separately under respective item of sch A, if required to be replaced)

S&F in replacement MCB SP 6 to 32 Amps 240V,10 KA breaking capacity, C curve as per IS/IEC 60898-1 2002 with IP 20 protected terminals all as specified in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

Supply and fix in replacement 'C' Curve MCB SPN 40-63 Amps working on 240 volts,10 KA 'C' curve as per IS/IEC 60898-1 2002 with IP 20 protected terminals all as specified in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

S&F in replacement MCCB with rating of 100 Amps, 415 Volts 3 pole with 16 kA breaking capacity, thermal magnetic adjustable of overload & short circuit release as per IS-13947 & IEC 60947-2 & the service short circuit breaking capacity (Ics) should be equal to ultimate breaking capcity (Icu) MCCB should be with suitable spreaders and phase barriers for each terminals complete all as specified and as directed.

M&L for laying XLPE underground cable 35 sqmm 3.5 core armoured sheathed with PVC cable stranded aluminium conductor 1100 volts grade lain in trenches, walls/floors complete all as specified and directed.

Excavation in trenches, not exc 1.5m wide and not exc 1.5 m depth and getting out in for foundation of pole, stay, laying of cable and pipe etc for Soft/loose soil complete all as specified and as directed.

Supply and laying 50 mm outer dia, double walled corrugated (DWC) HDPE duct pipe confirming to IS-16205 Pt-24 with antirodent and non flame propogating properties of approved colour complete with fittings i.e.coupler,Tee, elbow clamp for cable protection complete all as specified and directed by Engr-In-Charge (Note : Make / Sample of DWC pipe shall be got approved by contractor from GE prior procurement & execution of Work)

Material and labour for cutting of existing road/ hard standing by providing suitable T&P to make suitable size trench for laying 50 mm dia pipe in road crossing etc. including the cost of making good the disturbed surface and matching with existing (Chequered tiles/Road/PCC) complete all as specified and directed by Engr-In-Charge

Supply & fix GI tubing light grade 50 mm dia ISI marked with all fittings laid in trenches and fixed pole by flat iron clamps, nut, bolt, washers suitable size all as specified and directed at size complete all as specified and as directed.

Suply and fix in replacement of Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed.

S & F in replacement of modular Bell push modular 6 Amps single module complete all as specified and as directed.

Taking down unserviceable tube light fittings/ building security light any type complete all as specified and directed.

Supply and fixing in replacement of LED lights fitting 1x 20W, ,Inverter LED batten with square profile and polycarbonate channel. Lithium Ion battery with charging time 8hours-10 hours and back up time upto 4 hours complete all as specified and as directed.

Supply and fixing in replacement of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing in replacement of City 3 Decorative wall light fixture made up of Polycarbonate, suitable for 9 W retrofit LED Lamp B22 base complete all as specified and as directed.

Supply and fixing in replacement of lamp holder insulated body with back plate PVC/Polycarbonate type with cord grip cap, angular type fixed on wall complete all as specified and directed

M & L in in replacement of Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6.0 Sqmm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size concealed in wall of stone mesonary etc including one run of PVC insulated 6.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. (Note:- Two runs of 6.0 sqmm cable,one run of 6.0 sqmm cable and one run of PVC conduit will be measured as one unit)

S & F in replacement of Sheet metal 20 amp Single pole and neutral enclosure concealed in wallof stone mesonary with a two pin and earth plug and socket complete with one single pole MCB 20 amps, 10 KA breaking capacity, 'C' series, 240 V complete all as directed and specified by Engineer in Charge.

Supply and fixing in replacement of 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single pole and neutral fixing with the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Taking down ceiling fans / exhaust fan of any sweep and make from any position carefully including disconnection of electric supply and disconnection of blades from fan and refixing the same after painting and overhauling complete all as specified and directed.

M & L for Painting of ceiling fans / exhaust fan complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc and marking Srl No SM No / MES No with black paint, complete all as specified & directed.

Taking down carefully Geyser of capacity up to 25 ltrs from its position for repair/servicing such as removal of dust, checking, leakage testing, rubber etc, re-assembling at its position with fastner after repair, painting connecting to electric system with suitable size cable and industrial plug top complete all as specified & directed.

Material & labour for preparation of old painted surfaces of geyser by scrubbing, cleaning with sand paper/wire brush etc making good surfaces and painting by applying synthetic enamelled first quality paint using spray gun in situ including filling cavities with filler and marking Srl No SM No / MES No with black paint complete all as specified & directed.

S&F in repair GI tubing 50 mm dia Light grade for cable protection laid in wall /floor / pole including necessary cutting and making good with PCC 1:2:4, Type B-1, by using 20mm graded stone aggregate, 100mm thick or fixing on wall /under floor of any type, secured with clamps, nut & bolts etc complete all complete all as specified and directed.

S & F in replacement of LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply and fix wall Mounting indoor type vermin and weather proof of minimum size (1 X 1 X 0.25m) totally inclosed cubical type front operated, sufficient ventilation on sides cubicle type fabricated out of 3 mm outer and 2 mm thick CRCA sheet duly treated with seven tank process and painted epoxy powder coated siemens grey colour and with industrial type built in locking arrangement. The Panel indoor type cubical panel board IP 52 free standing floor mounted (Panel shall be manufactured by CPRI approved manufacturers to be approved by GE). The panel to be prewired with PVC insulated copper conductors appropriate current carrying capacity for connecting the incoming and out going MCCBs and MCBs. including disconnecting the LT panel and taking down the unserviceable cables and including MCBs. Energy meters of the panel shall be taking down and kept in safe custody for re-installation of site. Disconnecting the incoming and out going cable connection and dismantling the unserviceable conventional type industrial meter board and removing from site for further disposal and making LT UG cable connection complete of suitable size and comprising of following items:-

Mourya Construction (BID ID -3315086)

M/s.BAJRANG CONSTRUCTION (BID ID -3315048)

REKHA ELECTRICALS (BID ID -3321478)

om construction (BID ID -3314971)

Crown Chemicals (BID ID -3314535)