REPAIR TO ALL TYPE OF MAP FURNITURE (STEEL AND WOODEN) UNDER GE (AF) ADM AREA AT AF STATION AGRA.

Amount

REPAIR TO CHAIR DINING CUSHIONED, DRG No. FD/MAP-II/04 Taking down unserviceable wooden rear leg and S&F new rear leg (left or right) made out of 1st class HW (Teak) well seasoned free from knots and cracks with permissible moisture content complete all as specified, directed and shown on drawing.

Description all as per item No 01 here-in-before but front leg (left or right).

Description all as per item No 01 here-in-before but front/back rail

Taking out unserviceable cushion foam seat and S&F new 75mm thick 40 density foam of seat cushion duly upholded/ covered with superior quality tapestry cloth as per existing shape/ size complete all as specified and directed. NOTE: Cost of Tapestry cloth shall not be less than Rs 350/- per meter. Make of foam: Primo/Coolgel of Sleepwell or Goldline Plus of Curlon.

REPAIR TO BED HARD STEEL, Drg No. FD/ E6/ MAP/ 08 (R) Taking out old existing unserviceable plywood top and S&F new top made of 12 mm thick (No. of ply- 07), ply wood, BWR grade, commercial type of required size in single piece made to shape & size as per drawing and fixed to bed frame with suitable size steel screws with cup washers complete all as specified & directed.

Taking down old unserviceable prelaminated particle board of head board and S&F 18 mm thick new pre-laminated particle board exterior grade, ISI marked, decorative finish on both sides complete all as specified, directed and as shown on drg.

Description all as per item No 06 here-in-before but foot board

REPAIR TO TABLE BED SIDE DRG No : FD/E6/MAP/15 Taking down old unserviceable back and S&F new 6 mm thick, ply wood, BWR grade, commercial type of required size made to shape & size as per drawing complete all as specified & directed.

Taking out old unservicable top and S&F Top of table bed side made of 18/19 mm thick pre-laminated MDF board exterior grade ISI Marked decorative finish on both sides, including 0.60 mm thick PVC edging all round the top of table complete all as specified and shown on drawing.

Taking out old unservicable side and S&F side of table bed side made of 18/19 mm thick pre-laminated MDF board exterior grade ISI Marked decorative finish on both sides, complete all as specified and shown on drawing.

Taking down old unserviceable bottom of upper drawer and S&F new 6 mm thick, ply wood, BWR grade, commercial type of required size and shape complete all as specified & directed.

Taking out old existing unserviceable side of upper drawer and S&F new side made of 12 mm thick (No. of ply- 07), ply wood, BWR grade, commercial type of required size complete all as specified & directed.

Taking out old unservicable front of upper drawer and S&F new front made of 18/19 mm thick pre-laminated MDF board exterior grade ISI Marked teak finish complete all as specified and shown on drawing.

Taking down old unserviceable bottom of lower drawer and S&F new 6 mm thick, ply wood, BWR grade, commercial type of required size and shape complete all as specified & directed.

Taking out old existing unserviceable side of lower drawer and S&F new side made of 12 mm thick (No. of ply- 07), ply wood, BWR grade, commercial type of required size complete all as specified & directed.

Taking out old unservicable front of lower drawer and S&F new front made of 18/19 mm thick pre-laminated MDF board exterior grade ISI Marked teak finish complete all as specified and shown on drawing.

REPAIR TO CHARPOY WITH HARD TOP, Drg No. FD/MAP-II/ 01 Taking out old existing unserviceable plywood top and S&F new top made of 12 mm thick (No. of ply- 07), ply wood, BWR grade, commercial type of required size in single piece made to shape & size as per drawing and fixed to bed frame with suitable size steel nuts, bolts and cup washers complete all as specified & directed.

Removing of old unserviceable stiffener and S&F/ welding new stiffener made out of 25 mm x 25 mm, 16 gauge duly painted with two coats of synthetic enamel white paint over a coat of red oxide primer complete all as specified as directed.

Removing of old existing unserviceable flat iron cleat and S&F new flat iron cleat of size 25 x 60 x 6 mm including making holes and applying two coat of synthetic enamel paint over a coat of red oxide primer on new steel surfaces complete all as specified and directed.

REPAIR TO TABLE COMPUTER FD/E6/MAP/03 Taking down old unserviceable top of table computer and S&F new top of size 900 x 600 mm made out of 18 mm thick pre-laminated particle board exterior grade, ISI marked, decorative finish on one side and balancing white on other side fixed with screws wood/steel with cup washer and 4 mm thick TW beading all-round the table complete all as specified, directed and as shown on drg.

Taking down old unserviceable key board tray of table computer and S&F new tray of size 450 x 480 mm made out of 18 mm thick pre-laminated particle board exterior grade, ISI marked, decorative finish on one side and balancing white on other side fixed to existing/new telescopic channel with screws wood/steel complete all as specified, directed and as shown on drg.

Taking down old unserviceable mouse tray of table computer and S&F new tray of size 380 x 200 mm made out of 18 mm thick pre-laminated particle board exterior grade, ISI marked, decorative finish on one side and balancing white on other side fixed to existing/new telescopic channel with screws wood/steel complete all as specified, directed and as shown on drg.

Taking down old unserviceable drawer of table computer and S&F new drawer of size 380 x 200 mm, 75 mm deep made out of 18 mm thick pre-laminated particle board exterior grade, ISI marked, decorative finish on one side and balancing white on other side fixed to existing/new telescopic channel with screws wood/steel complete all as specified, directed and as shown on drg.

Removing old u/s telescopic channel and S&F new telescopic channel as per existing size for key board/Mouse tray/ Drawer and as directed.

Taking down old unserviceable upper/bottom shelf of table computer and S&F new shelf of size 450 x 300 mm made out of 18 mm thick pre-laminated particle board exterior grade, ISI marked, decorative finish on one side and balancing white on other side fixed with screws wood/steel with cup washer complete all as specified, directed and as shown on drg.

M&L for jointing of broken part of table computer as and where required through welding and applying two coats of synthetic enamel paint over a coat of primer at the place of welding to match the existing surface all as specified and directed.

Removing old unserviceable nylon buffer and S&F new nylon buffer as per existing shape and size/ as directed.

REPAIR TO CHAIR COMPUTER, FD/E6/MAP/01 Removing old unserviceable gas lift mechanism(shocker) and supply and fixing new gas lift mechanism as per existing shape and size and as directed.

Removing old unserviceable padestal assembly injection moulded in black 30 % glass filled nylon, 50 mm MS castor pins of press fitted to each prong for holding the castor for chair revolving as per existing shape and size and as directed.

Removing old unserviceable twin wheel castors and supply and fixing new twin wheel castors for trouble free movement as per existing shape and size and as directed.

Removing old unserviceable polyurethane foam from seat and back and supply and fixing new PU seat and back duly upholstered with best quality Acrylic/polyester fabric with PVC lipping all round as per existing shape and size and as directed.

Removing old unserviceable armrests and supply and fixing new black integral skin polyurethane reinforced with MS insert scratch proof armrest as per existing shape and size and as directed.

REPAIR TO CHAIR SCHOOL WITH HAND REST, FD/ E6/ MAP/05 Removing of old unserviceable PVC seat/ back of one piece and S & F new PVC seat/ back of one piece all as specified and shown on drg (Make - Featherlite/Durain/Godrej)

Removing of old unserviceable writing top (hand board) and S & F new hand board made of 18 mm thick pre-laminated particle board exterior grade, ISI marked, decorative finish on one side and other side balancing white fixed with screws wood/steel and providing 4 mm thick TW beading all-round complete all as specified, directed and as shown on drg.

REPAIR TO TABLE DRESSING GENTS (MAP), Drg No. FD/ E6/MAP/16 Taking down old broken mirror and S&F new looking mirror of size 5.5 mm thick as approved with and including new back plywood 12 mm thick, BWR grade, commercial type complete all as specified and shown on drawing

Removal of old unserviceable existing back ply of table dressing and S&F new back plywood 12 mm thick, BWR grade, commercial type complete all as specified and shown on drawing.

Removal of old unserviceable top and S&F new top of 18 mm thick pre-laminated MDF board exterior grade ISI Marked with decorative finish on both sides complete all as shown on drg and as directed.

Removal of old unserviceable side (top/bottom) and S&F new sides of 18 mm thick pre-laminated MDF board exterior grade ISI Marked with decorative finish on both sides complete all as shown on drg and as directed.

Taking down old broken glass shelves with S&F new glass shelves 5.5 mm thick supproted on runner/ glass holder as per existing size as specified and directed.

REPAIR TO CHAIR DINING, DRG NO. FD/MAP-II/05 Taking down old existing unserviceable/ broken wooden rear leg (left or right) of chair dining & S&F in position new rear leg made out of 1st class seasoned hard wood (teak) as per shape and size complete all as specified and shown on drawing .

Description all as per item No 40.00 here-in-before but front leg (left or right).

Description all as per item No. 40.00 here-in-before but replacement of back rest slightly curved.

Description all as per item No. 40.00 here-in-before but replacement of rails (left / right or front / back) complete all as specified and directed.

Removing of existing old unserviceable PVC seat and S&F new PVC seat of superior quality all as specified and shown on drawing. Make of PVC Seat : AMKO/ CELLO/ SWASTIK

REPAIR TO TEAPOY VERANDAH (MAP), Drg No. FD-FD/ E6/ MAP/17 Removing of unserviceable top and S&F new top of 18 mm thick pre- laminated particle board exterior grade ISI Marked teak finish on one side and other side white with PVC beading 4 mm thick all-round.

Removal of U/S shoe and S&F hard rubber shoe of superior quality as per existing shape and size for teapoy verandah all as directed.

REPAIR TO CHAIR VERANDAH, DRG NO. FD/E6/MAP/II/06 Removing unsv conduit circular pipe leg and S&F new conduit pipe leg made out of 18/19mm dia having wall thickness not less than 16 gauge of required length with gas welding duly painted with two coats of synthetic enamel white paint over a coat of red oxide primer complete all as specified as directed.

Removing of unsv PVC shoes and S&F new PVC shoes of superior quality complete all as directed.

Removing the unserviceable PVC seat from chair verandah and S&F new PVC seat 4mm thick seat made of PPCP material as per standard weight suitable for chair verandah complete all as specified and directed. Note:- One pair of one seat and one back shall be considered as each set. Make of PVC Seat back - AMKO/CELLO/SWASTIK

M&L for jointing of broken part of chair Verandah (Officers) as and where required through welding surface all as specified and directed.

M&L for jointing of broken part of Teapoy Verandah as and where required through welding surface all as specified and directed.

M&L for jointing of broken part of Chair school with hand board as and where required through welding surface all as specified and directed.

M&L for jointing of broken part of Charpoy with hard top as and where required through welding surface all as specified and directed.

M&L for jointing of broken part of Table bed side as and where required through welding surface all as specified and directed.

M&L for jointing of broken part of Bed hard steel as and where required through welding surface all as specified and directed.

M&L for painting to all exposed surfaces with two coats of synthetic enemal paint of required/exisiting colour including preparation of surface and fillig the hole with putty complete all as specified & directed or the following furniture articles :- (a) chair Verandah (Officers)

(b) Teapoy Verandah

(c) Chair school with hand board

(d) Charpoy with hard top

(e) Table bed side

(f) Bed hard steel

M&L for preparation of old wood surfaces of following furniture articles by scrapping and filling bores, holes with putty and finally rubbing with sand paper/ abrasive cloth thoroughly for smooth and clean surface and applying two or more coats of french polish over a coat of wax to the depressed surface for smooth finishing comlepete all as specified and as directed. (a) Chair dining Cushioned

(b) Dressing Mirror Gents

(c) Chair dining with PVC seat

R K SINGH AND CO

GIRENDRA SINGH AND CO

M/S DURGA ASSOCIATES

SARGAM ENTERPRISES