Renovation of Meeting room at Udyog Bhawan, Jaipur

Amount

Providing and fixing bright finished brass Mortice lock of approved make Godrej or equivalent with pair of brass handles for doors with necessary screws etc complete (Best make of approved quality) as per direction of Engineer-in-charge

Providing and applying two or more coats of textured Royale Paint of approved make and colour on walls all levels and heights including surface preparation for smooth finish as per direction of Engineer Incharge.

Supply of poise chair (black) size 72(W)x72(D)x89-101(H) cm with provision of seat height 41-53 cm. These dimensions shall be measured from out to out with permissible variations of ± 1.0 cm. The specifications are as below (a) SEAT/BACK ASSEMBLY The seat is made up of 1.2 ±0.1 cm thick hot pressed plywood and upholstered with fabric & moulded polyurethane foam. The back is a fabricated tubular frame assembly,powder coated ( DFT 40-60 micron ) and upholstered using net fabric with high tenacity yarn. The back tubular frame is made of dia 1.9 ±0.02 cmx0.16 ±0.0128 cm thick MS ERW tube and black powder coated ( DFT 40-60 micron). The mid back size shall be 47cm (W)x58 cm (H) and seat size shall be 48 cm (W) x47 cm (D). (b) HIGH RESILIENCE POLYURETHANE FOAM The HR polyurethane foam for seat shall be moulded with density 45±2 kg/m3 and hardness load 16 ±2 Kgf as per IS 7888 for 25 percent compression. (c) COVERS The back cover shall be perforated strip from 0.08 ± 0.01 cm thick CR steel and powder coated ( DFT 40-60 micron. The perforated back is provided with an injection moulded ABS label holder and paper label, which servws as a nameplate. The seat shall be covered on the underside with black polypropylene non woven fabric. (d) ARMREST The armrest top shall be injectioqn moulded from black poplypropylene and mounted on a fixed type MS tubular support. The support can be statically adjusted ± 1.5 ± 0.20 cm vertically. (e) PERMANENT CONTACT MECHANISM The permanent contact mechanism shall be 360 degree revolving type with 14 ±2 degree maximum back tilt only including upright position loqcking and tilt tension adjustmemt (f) PNEUMATIC HEIGHT ADJUSTMENT The pneumatic height adjustment shall has an adjustment of 12.0 ± 0.3 cm (g) TELESCOPIC BELOW ASSY The bellow shall be 3 piece telescorpic type and injection mouulded in black polypropylene. (h) PEDESTAL ASSY The pedestal shall be fabricated from MS ERW tube dia 3.81 cmx 0.16 cm thick (IS:3074) and fitted with 5 No twin wheel castor. The pedestal shall be covered with a black polypropylene moulded 2 piece hub cap at the centre for aesthetic looks. The pedestal is 62.0 ± 0.5 cm pitch-centre dia ( 72.0± 1.0 cm with castors). The pedestal shall be powder coated ( DFT 40-60 micron ) (i) TWIN WHEEL CASTORS The twin wheel castor shall be injection moulded in black nylon

Meeting Room Lasede high back chair: 1) SEAT/BACK ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with pure leather and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf for 25% compression.The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Pure Leather. Seat SIZE : 47.6 cm. (W) x 49.2 cm. (D)BACK SIZE : 47.5 cm. (W) x 77 cm. (D). Product shall have Indoor Advantage GOLD, Indoor Advantage GOLD, GRIHA & SVAGRIHA, BIFMA Level 2, GREEN PRO certificates.2) ARMRESTS: The armrest top should be moulded from polyurethane(PU), upholstered in pure leather and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps.3) ACTIVE BIO-SYNCHRO mechanism: The adjustable tilting mechanism should be designed with the following features:• 360° revolving type.• Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort.• Tilt tension adjustment can be operated in seating position.• 5-position Tilt limiter giving option of variable tilt angle to the chair.• Seat/back tilting ratio of 1: 2• The mechanism housing should be made up of HPDC Aluminium black powder coated.4 SEAT DEPTH ADJUSTMENT: Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0±0.5 cm.5 ADJUSTABLE BACK SUPPORT: Back Frame should be connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need.6 PNEUMATIC HT. ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0±0.3 cm.7 PEDESTAL ASSEMBLY The pedestal should be High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.)8. TWIN WHEEL CASTORS:The twin wheel castors should be injection moulded in Black Polypropylene.

Meeting Room Oxbo fix chair: 1.SEAT ASSEMBLY: The seat assembly should be made up of 1.2 ±0.1cm. thick hot-pressed plywood , upholstered with fabric upholstery covers and moulded Polyurethane foam. Product shall have GREEN PRO, GRIHA & SVAGRIHA, GREEN PRO certificates.SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D)2.BACK ASSEMBLY: The back asembly. should be made of powder coated (OFT 40-60 microns)tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back should be upholstered using double layer spacer mesh fabric with high tenacity yarn.BACK SIZE : 46.5 cm. (W) x 60.5cm. (H)3.HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression.4.ARMRESTS: The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. .5.TUBULAR FRAME: The powder coated (DFT 40-60.microns) tubular frame should be cantilever type & made of Ø2.54 ±0.03cm. x 0.2 ±0.016cm thick M.S.E.R.W. Tube.

Meeting Room :Providing and Fixing of conference table 17 seater having size 6237mm*1457mm*740mm made of Work Surface-Made of 36mm thick MDFone side prelaminate board conforming to IS14587:1998 with 0.4mm PVC membrane pressed on to top and having chamfered edge. Product shall have GREENGUARD, Indoor Advantage GOLD, GRIHA & SVAGRIHA, GREEN PRO certificates.Plastic ABS access flap is provided for easy access to wires and cables. Work top is available in various shapes as shown above.Understructure-The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board ofE1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded withmatching 2 mm thick PVC lipping. Aluminium alloy 63400 - WP profile is used forconnecting panels together.Modesty Panel-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Powder coated accent metal strip provided below work surface to enhance aesthetics. It ismade of 0.8mm CRCA as per IS 513,epoxy polyester powder coated (DFT 40-60 microns).Wire Management-An array of panels made of 0.8mm CRCA MS IS:513, epoxy polyester powder coated (DFT40-60 microns) is used for flow of wires and cables. Provision to mount Anchor Roma 6module plate is provided below worktop. Cutout on top with two piece injection mouldedplastic part polymer component is fitted to pullout audio,video cables onto worktop andconnect devices charger to power socket below worktop.

Supply & fixing of concealed door closure of approved make as per direction of engineer in charge.

Bidder Name

Amount

M/s. M.K. Enterprises(GSTN-NA)--2791520