(LINE 22) Ward No.-08 me Prachin Shiv Mandir ka Jeernoddhar karya. (RVA)

Brick work with common burnt clay modular bricks of class designation 7.5 in Superstructure above plinth Level in All size and Shape in Cement mortar 1:4 (1 cement : 4 coarse sand)( DSR. Item No.- 6.4.1)(Rate - 9344.35x0.749 = 6998.65 Rs)

CEMENT PLASTER (IN COARSE SAND) 12 mm thick cement plaster of mix : (1cement: 4 coarse sand) DSR Item No. 13.4.1 ( Rate = 357.35x0.749 = 267.65)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). DRS Item No -5.2.2 (Rate=10852.95*0.749=8128.86/Cum)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.(Thermo-Mechanically Treated bars of grade Fe-500D or more)(As per DSR Item No-5.22.6) (Rate=107.10*0.749 = 80.21 )

Supply & Fixing S.S. (grade304) hollow tube/ flat for back support & Stainless steel railing flat S.S. rectangular or circular pipe pole for grouting of railing post including supply of all material, labour, T&P etc complete. (as per DSR-2023 Item No. 10.28) (Rate=772.40*0.749=578.53/Kg)

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.DSR Code 2023 -11.41A.2.1 Rate - 1502.77x0.749 = 1125.574/sq-m

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. DSR Code - 2023 - 8.3.1= 1267.95x0.749 = 949.69/SQ-M

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR code No-13.80 (Rate=156.05*0.749=116.88/Sqm)

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) DSR code No-13.46.1 (Rate=160.60*0.749=120.30/Sqm)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required.DSR 2025 Code - 1.10.1 Group A Point (Factor 107/109x0.755x0.97 = 0.7189) (Rate = 1189x0.7189 = 854.77/point)