KMC/WS/JHJP/39/2025-2026

SUPPLY, DELIVERY, TESTING AND COMMISSIONING OF 3 HP CAPACITY SUBMERSIBLE DEWATERING PUMP, DISCHARGE NOT LESS THAN 16 M3/HR, VOLTAGE 415+/- 10% V, 3 PHASE, FREQUENCY 50 +/- 3 % HZ, CABLE LENGTH 10 MTRS. MINIUM HEAD NOT LESS THAN 12 MTRS., IP: 68 OF (KSB/KIRLOSKAR/MODY/WPIL/KISHORE) MAKE.

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection Seimens 6-32 A TP

SUPPLY OF 3 POLE POWER CONTACTOR TYPE MNX18, 18 A CURRENT RATING

SUPPLY OF 3 POLE THERMAL OVER LOAD RELAY TYPE - MN-2 , RELAY RANGE 0.9-1.5 A TO 6-10A CURRENT RATING

Supply and delivery of Single Phase preventer Relay suitable for 415V, 6 wire, upto 20HP motor (Make: L & T/ABB/Schneider/Simence/ Minilic/ GE).

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection Legrand 6-32 A DP

Supply and Fixing of fuse unit complete with base and bridge on existing Board and necessary connection, for the following range.15 Amp./16 Amp., 240 V

SUPPLY OF 22.5 MM HOLE DIA MUSHROOM TYPE PUSH BUTTON SWITCH

Supply & fixing of 230/240V, LED indicating lamp (make:AE/KAPPA/IMP) other than Blue/ white color.

SUPPLY OF 3 PH LED AMMETER CL 0.5

SUPPLY OF INDOOR TAPE INSULATED RING TYPE LOW TENSION CURRENT TRANSFORMER OF FOLLOWING RATING 60/5A, 5 VA, CL 0.5

SUPPLYING OF FOLLOWING XLPE INSULATED ALUMINUM CONDUCTOR ARMORED CABLES OF 1.1KV GRADE AS PER IS 7098 (PART 1) 1988 WITH UP TO DATE AMENDMENTS. CONDUCTOR CROSS SECTION IN SQ MM-6, 3 CORE

Laying on Wall / surface with Saddles / clamps.(b)Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (HOT Dip) Wire, making holes etc. as necy. mending good damages and painting

Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross,elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (A) For Exposed Work (h) (ii) 80 mm dia. medium quality

Estimated amount

Add: 18%GST

Please Enable Macros to View BoQ information