Provision of Fire Hydrant and Sprinkler system at Darbhanga Airport

Amount

SITC of UL / FM approved Extinguishing agent: (FK-5-1-12) Clean agent filled in a PESO approved filling station and agent filled in stored pressure type cylinder with DLP Valve Assembly, Push in Connector For Tube, Saftey Burst Disc at 28 Bar and Mounting Bracket. Container as per IS 15683: 2018: Stored Pressure type fitted with Pressure gauge, UV Resistance, Operating Pressure 15 bar, Hydraulic Pressure Tested to 35 bars, Burst Pressure 90 bar, Red Powder coated. Certified by National Test House, Dept of Consumer Affairs, Govt. of India -08 nos UL Certified Linear pneumatic Heat Detection Tube for automatic fire detection & supperession system made by special modified polyamaide (PA), colour red RAL300,burst temperature 1000C to 1400C, inner diameter 4mm, outer diameter 6mm. Pressurised with dry nitrogen at 15 bar pressure with all necessary fittings & supports.Certified by National Test House, Dept of ConsumerAffairs, Govt. of India -131 m SITC of End of line adapter with pressure gauge for automatic fire suppression tube used for fitting at the end of tube for pressurizing & re pressurizing tube, pressure gauge & fitting to connect to sensor tubing. Tube connection 6mm. -08 nos SITC of End of Line Plug for automatic fire suppression tube used for fitting at tube end to terminate the point. Fitting made by brass nickel plated material. 05 nos SITC of "T Connection" brass nickel plated for 4x6mm. Sensor tube, quick & easy disassembly using special tool, external diameter tube 6mm. -05 nos SITC of CE Approved Pressure Switch to monitor pressure drop in the tube, Switch Point at 8 bars. -08nos SITC of Master Control Unit with audio visual alarm Control Panel (IP54 third party rating),2 NO/NC potential free relay contact for Main Fire Alarm/BMS/SCADA Integration. Gas discharge led indicator, battery led indicator, system status Led-08 nos indicator, AC power ON Led indicator. MAKE :K.I/CEASFIRE/KANEX/

Construction of Pump Rooom above underground water tank having 3X3X6 mtrs and inclusive of Excavation, P.C.C1:4:8, Masanory,RCC Slab,Plaster with niru pumps foundations ,man hole for pump suction.

Providing, fixing & testing black mild steel heavy duty (class `C’) pipes (IS:1239 Part-I) and fittings like flanges, tees, elbows, bends junctions, reducers etc, clamps structural steel supports as required/ directed at site including cutting & making good the walls, floors, RCC work etc cutting chases & filling the same with cement concrete 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 20 mm nominal size) or cement mortar 1:4 (1 cement :4 coarse sand) as required including painting the exposed pipes with desired shade of two or more coats of synthetic enamel paint over a one or two coats red oxide primer including painting of legends with dirction arrows as instructed by engineering incharge. as given in speciafication..(Plant room and inside the buliding). Make: TATA/JINDAL

25 mm dia

40 mm dia

50 mm dia

80 mm dia

100 mm dia

150 mm dia

200 mm dia

Providing on pipe including fittings protection for underground pipes from corrosion by applying PYPKOTE primer or equivalent make material @ (100gm/sqmtr) of pipe surface there after wrapping tape of 4mm thick PYPKOTE or equivalent make material protection coating by thermo fusion process. The material shall be overlap minimum by 20mm, strictly according to manufacturer's specifications MAKE :WPL/PYPKOTE/ AS PER AAI APPROVED MAKE

150 mm dia

80 mm dia

Excavation for pipe lines in trenches and pits in open areas where disposal of surplus earth is done along the alignment, including trimming and dressing sides, leveling of beds of trenches to correct grades, cutting joint holes, refilling consolidation and dewatering of refill in 15 cm layers and restoration of unmettalled or unpaved surface to its original condition. The rate including the cist of necessary timbering dewatering of rain water, diversion of traffic, night signals, fixing caution boards, watching fencing etc.

Upto 1.5 m depth in all classes of soil except rocky.

From 1.5 m depth to 2.25 m depth all classes of soil

Providing, fixing & testing on “STAND PIPE” 63 mm dia oblique female instantaneous pattern landing valves with suitable size bolts, nuts, washers and gaskets. Landing valves shall be of IS: 5290 specification, MAKE :ASHOKA/KANEX/MINIMAX AS PER AAI MAKE

Providing and fixing fire hose cabinet to house stand post fire hydrant, including all other related accessories fabricated from 16 gauge M.S. sheet of fully welded construction having front door with locking arrangement, partially glazed with 4 mm thick glass. Cabinet shall be painted with post office red colour of size 900 x 600 x 450.MAKE :ASHOKA/KANEX/MINIMAX AS PER AAI MAKE

Providing & fixing 63 mm dia 15 mtr. long Reinforced rubber lined hose pipe including SS male & female instantaneous type coupling machine wound with G.I. Wire complete in all respects. Hose shall permaline hose and coupling to IS:903-1975 with ISI certification (two hose per Hydrant) Make:MAKE :ASHOKA/KANEX/MINIMAX AS PER AAI MAKE

Supply & Installation of drum type wall mounting hose reels, swiveling 180o consisting of 25 mm dia. x 30 meters long armored rubber hose pipe with 15 mm dia. bronze shut of type jet nozzle & cut-off valve on the inlet including making connection to the wet riser, by drilling welding, fixing the hose reel to the wall by providing necessary anchor fasteners/ expansion bolts, grouting the same with cement mortar, painting all complete as per drawings, specifications. Make: Newage.MAKE :ASHOKA/KANEX/MINIMAX AS PER AAI MAKE

Providing & fixing Stainless steel 63mm dia. Short branch pipes with 20 mm dia. Nozzles, ISI Marked (IS:903) as per approved MAKE :ASHOKA/KANEX/MINIMAX AS PER AAI MAKE

Providing and fixing Stainless steel fire brigade inlet connection to fire tank consisting of 4 nos., 63 mm dia instantaneous type male couplings with 150 mm dia flanged outlet comnplete with bolts, nuts and rubber insertions as required and as per IS:904-1983, MAKE :ASHOKA/KANEX/MINIMAX AS PER AAI MAKE

Designing, providing and fixing Orifice plate made out of stainless steel plate (with 6 mm thickness) for following size of pipe to reduce pressure upto 3.5 Kg/sqcm complete in all respects., MAKE :ASHOKA/KANEX/MINIMAX AS PER AAI MAKE 80 mm dia

Providing and fixing 15mm dia, quick response quartzoid bulb type G.M. Sprinkler Head (Pendent / Upright / Conventional, as required) (UL / FM / LPC / listed / set to operate at 680C Approved chrome plated complete with decorating plate (Rossette). Make: TYCO/HD AS PER AAI MAKE

Upright Type at 68OC

Pendent Type at 68OC

Side sprinkler type at 68OC

Providing, fixing, testing and commissioning UL Listed S.S. Braided Flexible pipe for sprinkler drop complete with flare nuts on both end with washer and supporting rods and clamps 25mm dia upto 1.5 Mtr. Long. MAKE :HD/KANEX/MINIMAX AS PER AAI MAKE

Supplying, installing, testing and commissioning of electrical driven pump for hydrant system as per figure no. 11 of NBC part - 4 2016suitable for automatic/ manual operation consisting of the following as under: (Location: Fire Pump Room at basement -2 Near under ground water storage tanks). Fig 12 as per NBC -2016. Horizontal Split casing mounted centrifugal type fire p ump with bronze impeller with C.I. body should be of grade F.G. 200 to IS:210 casing shall be designed for 1.5 time of working pressure, capable of delivering 2280 LPM against a total head of 88 meters while running at 2900 r.p.m. to ensure a minimum pressure of 3.0 Kg per Sq.cm at the farthest outlet complete having tail pieces for proper connection to suction and delivery line, having a name plate indicating suction, delivery, head, discharge, stages, r.p.m. and direction of rotation. Squirrel cage, TEFC induction motor suitable for 415 + 10% 3-phase 50 Hz A.C. supply and of approximate suitable 60 H.P. (approx) for the above pump running at 2900 r.p.m. confirming to IS : 325-1978. Common bed plate of requisite strength manufactured out of M.S. channels of suitable size of ISMC including with suitable nos. of cushy foot mounting below ISMC channel and with suitable C.C. foundation etc. complete as required. Suitable mechanical seal with mounting arrangement. coupling and coupling guard for direct coupling of pump and motor. Drain pipe with valve (25 mm dia. ). MAKE: KBL/KOEL/WILO/KSB AS PER AAI MAKE

Supplying, installing, testing & commissioning of Diesel Engine driven fire pump suitable for automatic/manual operations consisting of the following, complete as required and as per specifications: (Location: Fire Pump Room under ground water storage tanks).Horizontal Split Casing centrifugal type fire pump with bronze impeller with C.I. body should be of grade F.G. 200 to IS:210 casing shall be designed for 1.5 time of working pressure, capable for delivery of 2280 LPM against a total head of 88 meters while running at 1500/1800 r.p.m. complete having tail pieces for proper connection to suction & delivery line, having a name plate indicating suction, delivery, head, discharge stages, r.p.m. & direction of rotation (as per specifications).Diesel engine suitable for the above pump complete with standard accessories & suitable water cooling system.Common base plate of requisite strength manufactured out of M.S. channels of suitable size of ISMC including with suitable no. of cushy foot mounting below ISMC channel.Suitable mechanical seal with mounting arrangement.1 No. pressure gauge (0-15 Kg./Sqcm) on the delivery line with isolation cock. oupling & coupling guard for direct coupling of engine & pump.1 No. 200 Lits capacity day fuel / diesel storage tank fabricated from 4 mm thick M.S. plates. Tank shall be provided with inlet, outlet, overflow, vent drain connections, manhole cover (300 mm I.D.) & level indicator. Tank shall be mounted on 2 m high steel structural supports with access ladder (Painted with 2 coats of red oxide paint). Tank shall be provided with epoxy coat from inside out-side with one coat of red oxide & two or more coats of synthetic enamel paint of approved colour.Drain pipe with valve (25 mm dia. )24 volts 180 AH lead acid battery (12 volts - 2 Nos) with boost/Trickle charger for starting the engine automatically complete as required. MAKE: KBL/KOEL/WILO/KSB AS PER AAI MAKE

Supplying, installing, testing & commissioning of electrically driven Jockey pump (as per specifications) suitable for automatic /manual operation consisting of the following: (Location: Fire Pump Room under ground water storage tanks).End suction horizontally mounted centrifugal pump running at 2900 r.p.m. capable of delivering 180 LPM against a total head of 88 meters complete with tail pieces for proper connection to suction and delivery line.Squirrel cage, SPDP induction motor suitable for 415 + 10% 3 phase 50 Hz A.C. supply & of 7.5 H.P.(Approx.) for the above pump running at 2900 r.p.m. (as per specifications).Bed plate of requisite strength manufactured out of M.S. channel of suitable size of ISMC including with suitable no. of cushy foot mounting below ISMC channel with suitable C.C. foundation.Suitable mechanical seal & 1 No. pressure gauge on the pump delivery line with isolation cock. coupling and coupling guard for direct coupling of motor and pump.Drain pipe with valve (25 mm dia. ).MAKE: KBL/KOEL/WILO/KSB AS PER AAI MAKE

Supplying, installing, testing and commissioning of Electrical driven Priming water fire pump suitable for automatic/ manual operation 250 lpm #15 m head monoblock type , ss shaft and mechanical seal , foot valve 100 mm -,NRV 100- MM,BFV 100 MM- Inclusive of all above as per site or type of installation.MAKE: KBL/KOEL/WILO/KSB AS PER AAI MAKE

Fire Brigade Suction Hose coupling (Draw out connection) with Nut for female coupling as per IS:902-1974 complete with 100mm dia MS Suction pipe and 100mm dia foot valve if required(to be connected to Static Tank).

Supply, laying, testing and commissioning of 1100 Volt grade XLPE aluminium conductor armoured cables including the cost of providing required gap between adjacent cables (minimum one cable dia.) and including the cost of providing identification tags saddle etc. complete as per specification, as required

3.5C x 95 Sq.mm cable

3C x 10 Sq.mm cable

3C x 4 Sq.mm cable

12C x 1.5 Sq.mm cable

CABLE TERMINATION-Supplying of all materials and making terminations of 1.1 KV grade copper/aluminium multicore cables of the following sizes. The work includes cable glanding using brass plated single compression glands, sizing the core leads, removing insulation, fixing suitable crimping type copper/aluminum lugs/thimbles by using hydraulic crimping tools with correct size of the dies, shaping the leads and neatly connecting the same to the equipment terminals, Make: Polycab.

3.5C x 95 Sq.mm cable

3C x 10 Sq.mm cable

2C x 4 Sq.mm cable

Providing, fixing and testing cast iron water type Foot valve complete with nitrile / EPDM lining seat, stainless steel Disc., Carbon Steel shaft and stainless steel stem complete with flange, nuts, bolts, washer and gesket tested to 16 KGs / sqcm complete in all respect. MAKE : SANT/KVPL/ZOLOTO AS PER AAI APPROVED MAKE 200 mm

Providing and fixing cast iron Y-strainer suitable to pipes of following dia (including flanges), rubber gaskit, nuts, bolts complete in all respect.MAKE : SANT/KVPL/ZOLOTO AS PER AAI APPROVED MAKE

100 mm dia

200 mm dia

Providing & fixing double flanged flexicon rubber expansion joint (suitable for system test pressure) of standard length as per specs including rubber gaskets, flanges, nuts, bolts and washers complete as required as per specifications. MAKE: CORI RUBBER/KANWAL/AZAD AS PER AAI APPROVED MAKE

200 mm dia

150 mm dia

100 mm dia

80 mm dia

Providing, installation, testing and commissioning of dual plate non return valve, PN 16, of following sizeMAKE : SANT/KVPL/ZOLOTO AS PER AAI APPROVED MAKE

150 mm dia

100 mm dia

Fabricating, Supplying, Installation, Testing and Commissioning of 450 mm dia, 2 Metre high Air Vessel of continuous welded construction with flanged discharge header in pump house fabricated out of 10 mm thick dished ends and 8 mm thick MS sheet, Air Release Valve, complete with drain arrangement with 25 mm dia gun metal wheel valve complete with all accessories etc.

Providing and laying 150 mm MS Wrap Coat Pipe lines of 150 mm dia MS (C class) pipe MS by open cut method and 165 (od) MS C class grade by hdd method

Supply, Installation, testing and commissioning of pressure switches in MS pipe for Hydrant / Diesel Engine Driven Pump / Jockey Pumps, diaphragm type, adjustable range from 0-10 kg/sq.cm and a regulation range of 0.1 - 1.5 kg/sq.cm direct mounted SNAP acting type made from die cast aluminium with epoxy powder coated finish and SS316 diaphragm and other wetted parts, including necessary wiring upto control panel & other materials as required as per specifications.

Providing & fixing dial type (100 mm) pressure gauge with isolation ball valve suitable for working pressure of 250 PSI, short pieces, nipples, elbows, stainless steel 'U' tube & ball valve, etc as required as per specifications. MAKE : H GURU/WIKA/MAHAVEER AS PER AAI APPROVED MAKE

Providing, fixing, testing & commissioning electrically operated water flow switch(Vane type) the system should complete with tamper switch and accessories, with tap off socket arrangement as required, with potential free contact with 2 nos. NONC. MAKE : HONEYWELL/SYSTEM SENSOR 100MM Dia

Providing, fixing, testing and commissioning of annunciator Panel _10_ zones complete to indicate location of fire in a particular zone through speration of flow switch as given in specification.

Supplying, receiving, storing, laying, effecting proper connections, testing and commissioning of the following sizes PVC insulated and sheathed copper conductor armoured stranded control cable complete with saddles, clamps etc. as required and as per specifications. 2C x 1.5 Sqmm PVC Cable

Providing and fixing 150mm dia, Installation control valve assembly comprising of vertical wet alarm valve, 150mm dia, C.I sluice valve, hydraulic alarm motor & gong, 15mm dia, test valve, 50mm dia, drain valve and all necessary trimming connection including 2 Nos. pressure gauge as per manufacturer’s catalogue (UL/FM/LPC/listed/ approved), MAKE : HD/TYCO/NEWAGE

Supply & Installation of Cast iron sluice valve as per IS:14846 including making necessary flanged joints by providing necessary nuts, bolts, gaskets, etc. all complete as per specification.

Supply & installation, Testing and commissioning of Post Indicator Valve consists of cast iron telecopic barrel, cast iron base flanges, the sing shall be alluminium with minimum 0.080'' high and letter shall be minimum 1'' high black letteringwith white background and as per specification. MAKE : TYCO/WEFLO/VICTAULIC 150 NB, 250 PSI,

Providing & installation of Ball valve having screwed ends.

Supply and installation of 150mm dia Electro Magnetic flow meter able to measure 175 % of the pump rating. It shall be FM approved. MAKE : KRANTI OR AS PER AAI MAKE

Supplying, fabricating, structural steel supports such as MS channels, angles, flats, with two coats of Zinc rich primer of approved make and 2 coats of paints for inside pump room supports.(to be considered as secondary supports (pump rooms pipe supports, steel platform, production area supports in utility grids and supports from steel columns).

Supply & installation of 5 Nos Differential Pressure switch with 1No 150dia dial pressure gauge in Bronze check valve with 2mm Orifice, Stainless Steel presssure sensing piping 15mm dia required length as shown in drawing & NFPA 20.

Providing, fixing and testing cast iron wafer type butterfly valve complete with nitrile / EPDM lining seat, stainless steel Disc., Carbon Steel shaft and stainless steel stem complete with flange, nuts, bolts, washer and gesket tested to 16 Kg /sqcm complete in all respect. MAKE : KVPL/SANT/ZOLOTO

80 mm dia

100 mm dia

150 mm dia

200 mm dia

EVOLUTION TECH AND INFRA PVT LTD