REPAIRS TO DRAIN, COMPOUND WALL, FENCING AND GATE AND MISC WORKS IN AREA OF AGE B/R-I UNDER GE (W) JABALPUR

Amount

Taking down cement plaster on brick/ stone masonary including raking out joints, hacking for scrubbing down with water etc. complete all as specified and as directed (Rates are in cluded for upto G+2 floors, and no extra payment to be made for scaffolding and any other arrangement ).

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed..

M&L Brick work using fly ash old size bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

Ditto all as per above items but except brick ( obtained from demolition of brick work item No 2 ) complete all as specified and as directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick walls with old size bricks built in cement mortar 1:4 complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar (1:4) with WPC on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed (WPC shall be measured seperately) (Rates are in cluded for upto G+2 floors, and no extra payment to be made for scaffolding and any other arrangement ).

M&L for rendering 15 mm thick on brick work or concrete surface in CM 1:6 finished fair& even surface complete all as specified and directed. (Rates are in cluded for upto G+2 floors, and no extra payment to be made for scaffolding and any other arrangement ).

M&L for preparing new plastered or un-plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for Preparation of newly plastered surfaces of walls and applying two coats of weather proof paint over 2 coat of waterproof putty complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L coloured high abrassion resistance tiles 10 mm thick of size 300 x 300 mm (square/rectangular) of make Johnson Enduara conforming to IS -4457 2007, in floors, open areas, terraces, open verandahs etc. set and jointed in neat cement slurry and pointed in coloured cement to match including 25mm thick cement concrete type B0 1:2:4 (12.5mm graded aggregate) as in sub floors bedding below screed bed as specified in above item complete all as specified and directed by Engr-in-charge. Make : (Industrial) of Johnson Endura or equivalent.

Demolition of cement concrete in ground floor & paving n. exc 15 cm thick (below or above GL) unreinforced complete all as specified and all as directed.

M&L for 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor finishes & surface channel of drain laid in panels & finished even and smooth using extra cement complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection & court yard laid in panels and finished even and smooth without using extra cement including necessary form work complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate for coping, benching,coving, bed block for flooring, rungs, window cills etc complete all as specified and directed by Engr-in-charge

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundatian filling and mass concrete complete all as specified and as directed.

M&L for 100 MM thick PCC sub base type D-2 1:4:8 (40 MM graded aggegate all as specified and directed by Engineer-in-Charge

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F for Framed work as in doors or gates of angle/ MS tube or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming Fe-410W(GdeE-250) quality B complete all as specified and directed.

S & F framed work such as grills, gratings, drain cover etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

S&F for 1.25mm thick mild steel, plain, black sheet in hearths; covering to door shut ters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed.

S&F for 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls / laid in trenches including stack clamp complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls / laid in trenches including stack clamp complete all as specified and directed.

S&F, 75mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed.

S&F, 110mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed.

M&L for EXTRA for forming fair finish to drain or channel 30 cm inner girt in cement concrete using extra cement incluiding formings moulds mitred stopped ends etc complete.

M & L for RCC precast NP 2 pipe 450 mm dia laid and tested in trenches including dismantling of old pipe of any description complete all as specified and as directed.

M & L for PCC (1:3:6) type C2 as in 450 mm dia cement concrete NP 2 pipe concrete bed to drain including packing under and fencing against the side of pipe after they are laid and tested all as specified.

Supply, laying and jointing including dismantling of 300 mm nominal dia DWC(HDPE double wall corrugated), socketed including concrete bed cement concrete 1 : 4 : 8 type D2 to drain pipe including packing under and hauching against the sides of the pipe and sewage pipes having 6.0 M length, conforming to IS 16098 (Part-2) of SN-4 Stiffiness with and including necessary jointing matrials etc complete all as specified and directed. Make : Ultra plus of make : Supreme or equivalent brand , kisan Mouldings pvt ltd or fenotex or DURTON or KAVERI as approved by GE.

Demolition of reinforcement cement concrete including post,cover slab facia, parapets etc required to facilitate demolition complete all as specified and directed.

S&F in repairs, SFRC perforated drain cover of size 750mm x 450mm x 75 mm thick srounded with steel strip 75x1.50mm Reinforced as per manufacturer's design in Munufactured proccess laid over existing drain complete all as specified and as directed by Engr-in-Charge. Notes: - (i) Make of SFRC Manhole/drain cover and frame shall be approved by GE. (ii) Contractor shall provide PV alongwith manufacturer test certificate of SFRC cover.

M&L for Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 complete all as specified and directed. : .

M&L for Mild Steel TMT bar 8 mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed

Dismantling post or strut ( wooden, steel or RCC any type including taking down embeded portion and making good to disturb portion to ground complete all as specified and as directed.

S&F Mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed.

S&F, Mild steel screw bolts 12mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt n exc 10cm complete all as specified and as directed.

Dismantling of wire fencing of any description complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.

Supply only Chain link MS galvanised fencing with 4 mm dia and mesh size 75 mm x75 mm complete all as specified and as directed.

S&F, Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed.

M&L two coat of synthetic enamel paint over a coat of red oxide primer including prepration of new steel surface of any description exc 10cm in width or grith complete all as specified and directed.

Demolition of RCC jali in any description in any position complete all as specified and as directed.

M&L for ready made precast cement concrete louvered and jali 40-50 mm thick of approved design set in cm 1:4 including all mouldings all as specified and directed by Engr-in-Charge.

Supply & fixing in repairs frame work for railing fixed to wall/ floor made with 50 mm/40mm/30mm stainless steel (202) pipe including cutting & necessary welding complete all as specified and directed.

Welding in repairs n. exc 2.5cm in length for fixing of door hing, door spring , welding in iron doors (one welder with helper as per requirment base must be depolyed with thin 12 hours . Other wise penlty per Rupees Day 500 /)

De-silting & cleaning of old Rain water harvesting Pit including removing of all silt, Soil, vegetation growth, removing of aggregate of different grading, cleaning washing, straining and refill the same after necessary repairing in layers as specified and as directed by Engineer-in-Charge and removing rubbish from the premises.

Desilting and cleaning of existing storm water drain by removing silt, soil, vegetation growth and removing of rubbish from the premises all as directed by Engineer-in-Charge.

Cleaning of blocked rain water pipe of dia 100-150mm near path and drain and rubbish of the premises complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid dry or laid dry and pointed complete all as specified and directed.

M&L for 50mm thick sand cushioning and well ramming including watering as required complete all as specified and directed.

M&L for 60 mm thick Machine pressed rubber moulded precast concrete interlocking paver block any shape and size with grey cement and pigment, confirming to IS 15658-2006of 60mm thickness M 35 Grade complete all as specified and as directed.

M&L for coloured rubber moulded cement concrete chequered tiles 300x300x25 mm thick with cement and coloured pigment, set and jointed in neat cement slurry and pointed in coloured cement to match as in floors including 15mm thick screed bed to floor finishes in cm 1:6 complete all as specified and directed.

Removing building materials to a distance of 250 mtr to 500 mtr beyond the lead incl in the rates incl loading, unloading and stacking at the destination complete all as specified and directed.

RP ANAND

M/S Modern builders