Street light arrangement in Ward No. 56 Bhopal

Amount

NON SOR

3000001217-Piercing connector type-I Supplying & fixing of waterproof insulation piercing connector for aerial bunch cable i/c required attachment for single core cable of approved make in air with necessary material as per specification of required size as mentioned below – Main:16-95sq.mm, tap:1.5-50sq.mm (AS PER PWD SOR 2022)

3000002029-Dead end clamps Supplying &fixing of aerial bunch cable accessories tension clamp (dead end) i/c required attachment for single core cable of approved make in air with clamp, necessary material as per specification for required size. (AS PER PWD SOR 2022)

1000005523-S. clamp Supplying & fixing of aerial bunch cable accessories suspension clamp i/c required attachment for single core cable of approved make on pole with clamp, necessary material as per specification for required size. (AS PER PWD SOR 2022)

1000004966-90 watt LED Supply and installation of high efficiency LED street light luminaries with high pressure die cast aluminum body (make embossing on body) with toughened glass / polycarbonate cover. The fitting should be IP66, with power factor >0.9. The color temp of the LED should be 5000 K - 5700 K with color rendering index >70. THD less then 20%. The total system output should be not less than 110 lumens/ watt & total wattage should not be more than 90 w ± 5W. The LED fitting should have L70 life of more than 50000 burning hours at 35 degree ambient temp. Surge protection should be more than 4 KV internal and 10KVexternal. The LED should have individual optic lenses and bat wing photometry suitable for street light. G.I.pipe bracket 1 1/2" dia 5" long bend at 45 degree swastik, Tata, Jindal make midium class, MS clamp patti 25*5*5 cm with 4 no hole 12mm size as per sample,nut bolt 25*2.5 cm dia The LED fitting should be provided with 5 years guarantee for free repairing/maintenance or replacement of LED light fitting, LED, driver, surge protector, toughened glass / polycarbonate cover etc. on stamp paper with service center details.LM79-80 report with batch no. of supply must be supply at the time of delivery, BIS c ertificate is must be submitted with catalogue/model no. Spare part list of driver, cover and LED must be submitted before supply.

3000010661-150 Watt LED Supply and installation of high efficiency LED street light luminaries with high pressure die cast aluminum body (make embossing on body) with toughened glass / polycarbonate cover. The fitting should be IP66, with power factor >0.9. The color temp of the LED should be 5000 K - 5700 K with color rendering index >70. THD less then 20%. The total system output should be not less than 110 lumens/ watt & total wattage should not be more than 150 w ± 5W. The LED fitting should have L70 life of more than 50000 burning hours at 35 degree ambient temp. Surge protection should be more than 4 KV internal and 10KVexternal. The LED should have individual optic lenses and bat wing photometry suitable for street light. G.I.pipe bracket 1 1/2" dia 5" long bend at 45 degree swastik, Tata, Jindal make midium class, MS clamp patti 25*5*5 cm with 4 no hole 12mm size as per sample,nut bolt 25*2.5 cm dia The LED fitting should be provided with 5 years guarantee for free repairing/maintenance or replacement of LED light fitting, LED, driver, surge protector, toughened glass / polycarbonate cover etc. on stamp paper with service center details.LM79-80 report with batch no. of supply must be supply at the time of delivery, BIS certificate is must be submitted with catalogue/model no. Spare part list of driver, cover and LED must be submitted before supply.

1000008038-AB CABLE Supplying & drawing/laying of PVC insulated XLPE aerial bunch power cable conductor H2/H4 grade aluminium solid/stranded conforming to IS-14255- 1995, alu. alloy insulated messenger 1100 volts grade cable of approved make in air with necessary material as per specification of required size as mentioned below –Single core cable(insulated neutral messenger)3x35 sq.mm, 1x16(st. light), 1x35(insulated neutral (AS PER PWD SOR 2022)

1000005515-Automatic timer panel 110A Supply and installation of automatic timer panel of powder coated sheet steel enclosuer surface mounted having astronomical time switch, contecter, MCCB , MCB, required all materials including PVC cables etc complete in all respect of Indoasian, Havells, Schneider, L&T make only with 24 months guarrantee

3000000376-galvanized octagonal poles "9 Mtrs. high hot dipped galvanized octagonal poles with bottom of 200mm A/F, top 100mm, A/F made from 3mm thick HT Plate & 290x290x16mm"

3000012832-Foundation for octagonal pole Designing and construction of footing foundation for octagonal pole of desired size including excavation in soil/soft rock, base concrete M-7.5 (1:4:8), 15mm thick and pedestal of RCC M-20 (1:1.5:3), required tar steel reinforcement for required size from base concrete, shuttering, curing etc. with existing foundation bolts complete as per specifications in an approved manner as per manufacturer drawing or engineer-in-charge.

1000004966-60 watt LED Supply and installation of high efficiency LED street light luminaries with high pressure die cast aluminum body (make embossing on body) with toughened glass / polycarbonate cover. The fitting should be IP66, IK-10, with power factor >0.9. The color temp of the LED should be 5000 K - 5700 K with color rendering index >70. THD less then 20%. The total system output should be not less than 110 lumens/ watt & total wattage should not be more than 60 w ± 5W. The LED fitting should have L70 life of more than 50000 burning hours at 35 degree ambient temp. Surge protection should be more than 4 KV internal and 10KVexternal. The LED should have individual optic lenses and bat wing photometry suitable for street light. G.I.pipe bracket 1 1/2" dia 5" long bend at 45 degree swastik, Tata, Jindal make midium class, MS clamp patti 25*5*5 cm with 4 no hole 12mm size as per sample,nut bolt 25*2.5 cm dia The LED fitting should be provided with 5 years guarantee for free repairing/maintenance or replacement of LED light fitting, LED, driver, surge protector, toughened glass / polycarbonate cover etc. on stamp paper with service center details.LM79-80 report with batch no. of supply must be supply at the time of delivery, BIS certificate is must be submitted with catalogue/model no. Spare part list of driver, cover and LED must be submitted before supply.

1000001873-45 watt LED Supply and installation of high efficiency LED street light luminaries with high pressure die cast aluminum body (make embossing on body) with toughened glass / polycarbonate cover. The fitting should be IP66, IK-10, with power factor >0.9. The color temp of the LED should be 5000 K - 5700 K with color rendering index >70. THD less then 20%. The total system output should be not less than 110 lumens/ watt & total wattage should not be more than 45 w ± 5W. The LED fitting should have L70 life of more than 50000 burning hours at 35 degree ambient temp. Surge protection should be more than 4 KV internal and 10KVexternal. The LED should have individual optic lenses and bat wing photometry suitable for street light. G.I.pipe bracket 1 1/2" dia 5" long bend at 45 degree swastik, Tata, Jindal make midium class, MS clamp patti 25*5*5 cm with 4 no hole 12mm size as per sample,nut bolt 25*2.5 cm dia The LED fitting should be provided with 5 years guarantee for free repairing/maintenance or replacement of LED light fitting, LED, driver, surge protector, toughened glass / polycarbonate cover etc. on stamp paper with service center details.LM79-80 report with batch no. of supply must be supply at the time of delivery, BIS certificate is must be submitted with catalogue/model no. Spare part list of driver, cover and LED must be submitted before supply.

1000007137-AB cable 2x25 sq.mm, 1x16 Supplying & drawing/laying of PVC insulated XLPE aerial bunch power cable conductor H2/H4 grade aluminium solid/stranded conforming to IS-14255- 1995, alu. alloy insulated messenger 1100 volts grade cable of approved make in air with necessary material as per specification of required size as mentioned below – Single core cable(insulated neutral messenger) 2x25 sq.mm, 1x16(insulated neutral messenger)

3000003757-Spring loaded bus bar Supplying &fixing of spring loaded busbar screwless connector with enclosure of approved make including required clamp, nut, bolt, connection, testing as per specification to complete the job. Three Phase 3Ph, 1In+6Out

Bidder Name

Amount

MAA SHARDA ELECTRICALS(GSTN-23BHVPG8485Q2Z6)

S AND K ELECTRICAL(GSTN-NA)

S AND K ELECTRICAL

S AND K ELECTRICAL