REPAIRS TO JOINERY TOILETS RISING MOISTURE ROOF TREATMENT ETC IN THE AOR OF AGE B R II UNDER GE NORTH DELHI CANTT 10

Amount

Taking down shutters exc 1sqm but not exc 2 sqm each all as directed.

S&F framed work as in doors or gates of angle or other section with gusset plates,rails,braces, etc.,complete drilled for fixing of steel sheeting in or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete, all as specified and directed

S&F steel windows with side hung shutter including box type hinges with steel handle and steel peg stay complete with glazing/gauging bars, dovetailed or welded.complete all as specified.

M&L for rendering 15mm thick on any type of faces of brick work surfaces in cement mortar 1:6, finished the surface even and smooth without using extra cement all as directed and specified.

M&L prepartion of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of primer and 3mm th of wall care putty of make birla/JK, all as specfied and directed.

M&L for rendering 5mm thick rendering in CM(1:3) on concrete surface as in ceiling/chajja and rainforced cement concrect surfaces

M&L for preparation of new plastered surfaces as on ceiling and applying two coats of white wash, complete all as specified and directed. (Up to four Storeyed)

M&L for preparation of old decorated plastered or unplastered surfaces of wall and applying one coats of oil bounf distemper including preparation of old surfaces complete all as specified and directed.

M&L for preparation of old decorated previously treated surfaces of ceiling by brooming down scrapping down smoke and efflorescent etc. complete and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old decorated surfaces of any description and applying one coats of cement base paint on external wall surface complete all as specified and directed. ( Heigh of Bldg is upto 15 mtr )

Supply only Liquid integral water proofing compound complete all as specified and as directed.

Taking down chowkhats or frames with shutters n.exc 1.5 sqm each(without taking off shutters from the frame) all as directed.

Ditto as per item above but exc 1.5 sqm but n.exc 4sqm each

Taking down cement or cement lime plaster on brick or stone walls/ceiling etc including raking out joints, hacking for key, scrubing down with water etc complete all as specified and directed.

M&L 15 mm thick cement plastering over brick wall in CM 1:4 on fair faces finished even and smooth without using extra cement , complete all as specified and directed.

Material & labour for preparation of newly plastered surfaces of any description and applying two coats of cement base paint over a coat of primer all as specified and directed.

S&F MS bars as in window guard bars welded to steel window frame or fixed to wooden frame all as specified and directed.

Supply and fix 35mm thick, second class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc with rails and styles including cut and mitered beards for securing wire cloth etc,all as specified and directed.

S&F 30 mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed.

M/L preparation of new wooden surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of primer all as directed and specified.

M/L preparation of old wooden surfaces of any description over 10cm width or girth and apply one coats of synthetic enamel paint all as directed and specified.

M/L preparation of old steel surfaces of any description over 10cm width or girth and apply one coats of synthetic enamel paint .

Material and labour preparation of new steel surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F aluminium door shutter , powder coated fixed to wall with steel fastness min four number each side partly glazed with 5 mm thick tinted glass and partly panelled with 8mm thick colouered aluminium composit panels incl rubber beading, joining cleat for fixing in position, 2 numbers aluminium door handle 250 mm long, 1 number aluminium barrel tower bolt 200 mm long ,1 number aluminium floor door spring & one No 4 liver mortice lock of Godrej of size 100 mm in each shutter will be provided all as specified and directed as per following specifications -- (a) Vertical Members of shutter (Style) Section shall be of size 85.00 x 44.45 x 1.50 mm (Section No 19560) (b) Top rail ( Top Members) of shutter Section shall be of size 85.00 x 44.45 x 1.50 mm (Section No 19581) (c) Lock rail (Middle member) of shutter Section shall be of size 150.00 x 44.45 x 1.50 mm (Section No 19596) (d) Bottom rail ( Bottom Members) of shutter Section shall be of size 150.00 x 44.45 x 1.50 mm (Section No 19584) (e) Glazing clip for securing glass of shutters shall be of 0.80 mm thick (Section No 19370). Standered quality rubber beading shall be used for securing of glass (f) Top, Bottom and verticle member of shuttert will be tightened with hexagonal nut and purpusly made bolt of 10mm dia MS round bar threaded on both the end . Note:-(i) Section No given above are of make Jindal, Contractor may use similar section of other make mention in Appx B.

S & F aluminium powder coated three track window ( two shutters glazed & one shutters wire gauge) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below :-- (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 21447) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 21446) (c) Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.50 (Section No 21455) (d) Interlock Section of Shutter shall be be of size 18.00 x 40.00 x 1.50 (Section No 21454) (e) Bottom Members of shutter Section shall be be of size 18.00 x 40.00 x 1.50 (Section No 20844) Note:-(i) Section Number given above are of make Jindal, Contractor may use similar section of other make mention in Appx B.

S&F in repair Aluminium (Die Cast) body door closer hydraulically regulated, designation No 3, universal type, suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg all as directed.

S&f in repair 5.5mm thick ordinary glass exc 0.5 sqm in each pane complete all as specified and dricted by Engr in Charge.

S&F aluminium anodised powder coated Deco grill DG-104 10mm wide with U shape snap beading all as specified and directed.

S&F factory made solid panel PVC door shuter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails & MS frame shall be covered with heat moulded plain colour PVC `C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement of stiles and plain colour PVC sheets for top rail,lock rail & bottom rail, on either side & as gap insert for top rail & bottom rail & panelling of plain colour PVC sheet to be fitted in the MS frame welded/Sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per complete all as specified.

S&F solid door frame 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete.all as specified and directed.

S & F 100mm medium weight stainless steel butt hinges complete all as specified

S&F aluminium anodised barrel tower bolt 200mm long extruded section all as specified.

S&F 250mm long aluminium alloy anodised sliding bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts and extruded section or cast aluminium alloy and fixed complete.

S&F 150mm size extruded aluminium handles fabricated type anodised complete all as specified.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks/stainless steel wire staples all as specified.

M&L including dismentling , Viterified ceramic tiles 10 mm thick square/rectangular light shade texture polished,area of each tiles Not exceeding 0.36 sqm,in floor etcb set and jointed with neat cement slurry and pointed with white cement mixed with pigment to match the colour of the tile including 15mm thick cement mortar screed bed in CM (1:6) complete all as specified and directed. complete all as specified and directed.

Ditto but on vertical surface as in dados/skirting over 10.mm thick plaster as backing coat in CM 1:4 all as specified

M&L for non skid ceramic tiles colored tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,in floor etc set and jointed in neat cement slurry and pointed in colour cement laid over and including 15mm thick cement mortar screed bed in CM (1:6) including dismenteling complete all as specified and directed.

M&L for glazed ceramic coloured tiles size 450x300x7mm thick in walls etc set and jointed in neat cement slurry and pointed in colour cement laid over 10mm thick rendering in CM (1:4) including dismenteling complete all as specified and directed.

M&L plain cement concrete 1:2:4 type B-1 ( using 20 mm graded stone aggregate) as in floors, pavement ,mass concrete, finished even and smooth using extra cement all as specified.

Material and labour for plain cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate, 75mm thick as in plinth protection/pavment and the like, finish the surfaces even and fair without using extra cement all as directed and specified

M & L in repair 60mm thick precast colour concrete decorative interlocking paver block rubber moulded with PU coating including 25mm sand filling under floors including watering and consolidation complete all as specified.

M/L cement concrete type B-1, 1:2:4 using 20mm graded aggregate in roof, kerbs or mud stops, rounded or chamfered on edges complete all as specified.

Demolition of RCC (reinforcement cut as required to facilitate demolition) Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete as specified.

M&L formwork to soffit of suspended slabs,such as roof slabs, floor slabs,landingand simillar work n.exc 200mm thick(Horizontal/Sloping). complete as specified.

M&L RCC nominal mix 1:2:4 using 20mm graded stone aggregates as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves complete all as specified.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking bending, spirally for hooping end and binding with and incl mild steel wire (annealed) not less than .9mm dia or securing with clips complete all as specified..

Taking down Industrial steel sliding shutters of Size 14.00Sqm (Approx) including Channels, rail, cleaning the guide channels etc and greasing /oiling to all moving parts of sliding shutter including straighting the anchoring rod, braket plate for smooth functioning, replacement of damaged/worn out 1.25 mm thick MS steel sheet and re-fixing the sliding shutter with and making good the disturbed portion etc. complete all as directed and specified. (NOTE 1 :- The unit quoted rate deemed to be included for minor repairs , welding and replacements of nut & bolts if required. NOTE 2 :- Material Like Channel , angle rail etc shall be measured and paid in following item given below.)

Supply only guide channel, rails, angle etc suitable for smooth functioning of Industrial sliding shutter of size 3.8x3.80M (Approx)including necessary welding to M.S. bracket plate, drilling holes for fixing complete all as directed and specified.

Supply only 150mm dia Cast Iron Wheel Suitable for industrial Sliding door of Approx size 15.00 Sqm ( Appx) complete all as directed and specified.

Supply & Fix in repair rotational moulded polythene water storage tanks, tripple-layered,colour-white 1000 Ltr capacity, cylindrical, vertical with closed top, make: Sintex, Rotex,hoisted and fixed in position incl 20 mm bore PTMT high pressure rate float valve with aluminium rod and ball, make: Prayag India. all as directed and specified.

S&F in reair 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls and floor incl taking down all as specified.

S&F in repair 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls and floor incl taking down all as specified.

S & F in repair fancy type chromium plated long body bib taps 15mm bore with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed all as directed and specified

M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or inserting APP Mambrane, etc., and making good, cutting not exc 10 cm girth on stone walls complete all as specified and directed.

S & F in repair angular stop cock, chromium plated, cast copper alloy C.P 15mm bore screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union all as directed and specified.

S & F in repair 20mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified

S&F in repairs CP brass pillar taps cast copper alloy with capstan heads,chromium plated screwed down high pressure with or without lettered hot or cold with long screwed sank and flynuts screwed for iron pipe of 15 mm bore complete all as specified and directed.

S& F in repair 15 mm dia Central hole basin Brass CP mixer formixing hot & cold water screwed down for iron pipe and fixed

S&F in repairs 15 mm wall mixer , cast copper alloy , with capstan heads, chromium plated, screwed down high pressure , with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.

S&F in repairs 15 mm Sink mixer , cast copper alloy , with capstan heads, chromium plated, screwed down high pressure , with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.

S & F in repairs CP hygienic spray (2in 1 facucet with 1.5M long tube) complete all as specified.

S & F 100mm chromium plated grating round shape fixed over floor trap with coloured cement all as directed

S& F in repair vitreous china wash hand basins with fixing accessories set including cp coupling 32mm dia, waste pipe (under / over counter ), of any colour size: 555X425X195mm, shape: Oval, all as specified and directed.Make: FLS_WHT_5701 or eqv.

S & F in repair vitreous china wash hand basin white flat back of size 550x400mm including cutting for and pinning in ends of brackets, 32mm dia, brass chromium plated waste fittings, pipe and CP pillar tap etc complete all as directed and spcified.

Supply & Fix in repairs 32mm dia PVC waste pipe for WHB with union complete all as specified and directed.

Supply & Fix in repairs 15mm bore PVC connection pipe of 450mm size with 2 Nos brass check nuts with washers

Supply & Fix in repairs PVC low level flushing cistern valveless, 10 ltr capacity syphonic action type with inlet ball valve, float handle including brackets and (HDPE) flush pipe of 32mm dia with brass nut & washer, PVC connecting pipe, etc. connecting with WC inlet and making good the surface to match with existing complete all as directed and specified.

S&F in repairs vitreous china wash down water closet pan (padestal pattern) white colourclosed pattern including , all as specified and directed

Vitreous china squattting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rests including connection to trap, anti syphonage pipe etc. complete, fixed in repairs all as specified.

S&F in repairs vitreous china urinal half stall type white including waste pipe complete all as specified and directed.

S&F in repair 100mm dia sand cast cast iron soil waste and vent pipes in any length with or without ears, with cement joints laid in trenches or in floors

S&F in repair 75mm dia sand cast and pipe soil waste and vent pipes in any length with or without ears, with cement joints laid in trenches or in floors.

S&F 100 mm dia cast iron bends(any radius) diminishing pieces or tapers(;larger bore measured)

S&F 75 mm dia cast iron bends(any radius) diminishing pieces or tapers(;larger bore measured)

S&F 75mm cast iron branch pieces,double (equal or unequal),ordinary or inverted (spigot or socket type) with ovel access door or with parallel branches complete all as specified and directed.

S&F 100mm cast iron branch pieces,double (equal or unequal),ordinary or inverted (spigot or socket type) with oval access door or with parallel branches complete all as specified and directed.

S&F 110 mm bore PVC rain water pipe single socketed in any length with rubber ring fixed to wall with clamp incl taking down old existing pipe complete all as specified.

S&F 100mm cast iron Nahani trap , including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified.

Supply only safety lever locks mild steel with 4 lever for rolling shutters.

Supply only rollers and ball bearing of approved make.

Supply only mild steel helical wire spring 45cm long , 75 mm dia and weight of each spring not less than 3.00 kg complete all as specified and directed

S& F 60 mm thick M 35 grade vibro compacted precast concrete interlocking paver blocks rubber moulded plastic coated conforming to IS 15658-2006, fixed using gray cement and pigment laid in any pattern complete all as specified and as directed by enginer- in -Charge.

M&L for PCC 1:4:8 type D2 using 40mm graded stone agg as in foundation, filling and mass concrete all as specified and as directed.

Dismantling/removing of old roof treatment of any type to get the original RCC surface,cleaning with water etc comlete to receive plaster/PCC and removing the debries out of MOD land all as specified.

M & L PCC type B1,1:2:4 ( 12.50 mm graded stone aggt) as in mass concrete using WPC PD proof 101 LW(+) of Dr fixit or equvalant integral WP admixer @200 ml/bag of cement comlete all as specified and directed (WPC will measured and paid seperatly)

M&L for preparation/roughning of the plastered/unplastered roof surfaces incl removal of grass, small trees and fixing the APP polymeric water proofing membarance of minimum 3mm thickness & weighing not less than 3.6kg/sqm of Make : 'Superthemolay' manufactured by M/S STP Ltd or HYPER PLAS (Poleyster) manufactured by M/S IWL ltd or SHALIPLAS (Poleyster) manufactured by M/S Capital Steels and chemicals Pvt Ltd or torch tan as approved by GE, black finished reinforced with non-woven poleyster matt. with a thermofusible finish laid over compatible bitumen, 85/25 Gde, 1.2Kg/Sqm over bitumenous primer at the rate of 0.40 kg/sqm, torching overlaps with a propane or a butane gas torch with a overlap of 100 mm at the sides and 150 mm at the ends and sealing applying a consistent coat of bituminous alluminium paint over APP surface all as per manufacturers instructions over and including screed bedding 15mm thick on brick/roof surfaces in cement mortar 1:4, mixed with water proofing compound as per manufactrurs instruction incl removal of existing roof treatment complete all as directed and specified

Disconnecting existing overhead tanks,setting aside or lowered if required for repairing ,cleaning etc and hoisting if reqd reconnecting and refixing in position but capacity exceeding 500 litres and not exc 1000 litres complete all as specified & directed.

Removal of plants/trees of girth n exe 30 cm from roof tops/sides, external walls of bldg, chajjas, wall junctions, junctions of rain water/CI soil/waste pipe junctions including taking out the roots entered in wall/slab surfaces and making good the disturbed surfaced using PCC (1:2:4) type B-0 or cement mortar (1:2) including repairing the GI/CI/PVc pipe joints which were damged during cutting/taking out process to match with the existing and finishing the disturbed surfaces to match with existing including necessary scaffolding/staging upto a height of 15.00 m from the ground level and removing debries out side MOD Land comlete all as specified and directed.

M&L Taking down cement plaster of any description from brick, stone walls or concrete surfaces including raking out joints, hacking for key,scrubbing down with water,and rendering 15 mm th in cm (1:4) in two layers (10mm+5mm ) mixed with PD proof 101 LW(+) of Dr fixit or equvalant integral WP admixer @200 ml/bag of cement over two coats of super latex 302 of Dr fixit or equ. in the ratio 1:4: 7 (one part super latex 302, 4 part water and 7 part cement ) @ 1.50 Kg of homogenious mixture per Sqm in two coats and finished the surface even and fair without using extra cement complete all as specified and directed. Note- PD proof 101 LW(+) and super latex 302 shell be measured and paid seperatly

Supply only PD proof 101 LW (+) of Dr Fixit or eqe.

Supply only super latex 302 of Dr Fixit or eqe.

S&F 32mm GI pipe as in spout pipe in sunken Portion fixed in PCC 1:2:4 type B0 complete all as specified and directed.

M & L PCC type E-2 1:5:10 ( 40mm Brick aggt) in sub base of floor, or in Sunken portion

M/L for preparation of old , rusted steel surface of any description and applying two coats of synthetic enamel paint all as specified and directed.

M/L for preparation of old , steel surface of any description and applying two coats of synthetic enamel paint, , truss eaves gutters and pipes any discription , n exc60mm girthincluding holder bats, distance pecesetc, all as specified and directed.

Impregating cream for injection into masonary or concrete wall against capilary rising humidity. Rising bar supper strong (product No-201) of chowgale building chemicals or equivalent Pidilite/Dr Fixit /Sika / Phosrock /Asian complete all as spd and directed. METHODOLOGY 1. The surface must be sound , absorbent,clean free from dust oil paint etc 2. The plaster must be knocked out at least 50 Cm beyound the visibily penitrated area. 3. Damaged morter,joints are to be scraped out to adepth of appx. 2-3 Cm. Loose morter/ ,concrete to be removed. 4. Drilling bore hole 8-10 mm dia upto 50-60 Cm deep starting from ground level at an angle of min 30 degree into the wall/masonary . Vertical ofset will be min 300 mm. 5. Injucting of cream will be carried out with heigh pressur injucting machin @ 100-150 ML/Miter /hole in single injuction .For uniform filling injuction nazzel will be pulled out . 6. Injuction prosses will be repeted after 24 Hours for propper filling of cream.

Welding in repairs exc 2.5 Cm but not exc 5Cm in length thickness of metal to be welded exc 6mm bet nexc 9 mm

Sch of Credit- Total contract sum shall be calculated after deduction of Sch of Credit amount Credit amount - Rs. 17610.00

sony engineering works

imran construction company