8913/E8

Amount

S&F M.S. framed work such as grills gratings etc with end of bars shouldered/or riveted or forged into spikes framed guard bar, barred iron doors, ladders, framed balusters, walkways, railing, frame work of water tanks and similar works steel quality conforming to Fe-410, Grade or Fe- 310 complete all as specified directed for work upto 4 th storied.

S&F M.S. framed work such as grills gratings etc with end of bars shouldered/or riveted or forged into spikes framed guard bar, barred iron doors, ladders, framed balusters, walkways, railing, frame work of water tanks and similar works steel quality conforming to Fe-410, Grade or Fe- 310 complete all as specified directed for work from 5th to 8th storey.

M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed for work upto 4 th storied.

M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed for work from 5th to 8th storey.

M&L rendering 15 mm thick in CM 1:6 on brick/ concrete wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement complete all as specified and directed .

M&L PCC 1:3:6 type C-1 (20 mm graded stone aggregate) as in bed block for embedding hold fast of doors, window frames or chowkats including necessary form work complete all as all as specified directed.

S&F MS plain black sheet 1.25 mm thick in wall cladding ,steel gates, railing and similar works cut to size ,edges beaded if directed, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel members etc. with plain 40 mm lap joints oe welded / rivetted seems including bending, turning up, mitred angles, stopped ends, outlets etc. as required complete all as specified and directed .

M&L preparation of old steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed .

Excavating in post holes (or similar holes) each n. exc. 0.5 cum, getting out returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc. 25 cm watering and removing surplus soil to distance n. exc 50 m and making good surface complete all as specified and directed.

M&L cement concrete 1:2:4 Type B2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete etc complete all as specified and directed.

M&L MS in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tube conforming to IS 1161 -1979 grade St -240 complete all as specified and directed.

M&L M.S. Rolled sections as in framing for cladding, glazing and the like fixed with cleats and connecting complete grade of steel Fe-410-W (Gde - E-250), quality - A complete all as specified and directed.

S&F rolled mild steel section Fe 410 -W (Gde- E- 250) quality "B" for plate girder or single sanction built of one beam or channel section with flange and plates, caps, bases, splices angle brackets, cleats and other connection complete all as specified and directed .

S&F Mild steel screw bolts (machine made) with hexagonal / square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, length of bolt exc 5cm & n exc 10cm long dia of shank 11 to 15 mm complete all as specified and as directed .

M&L 100 mm thick cement concrete 1:4:8 type D2 (using 40 mm graded crushed stone aggregate) as in sub base of floor complete all as specified and directed.

M & L 50mm thick PCC ( 1 : 2 : 4 ) type B-1 using 20mm graded stone aggregate as in floor and finished even and smooth with using extra cement complete and applying spike rolling to surfaces or making impressions of expanded metal while the concrete is green complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.45 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with J hook complete all as specified and directed.

S&F for galvalume sheet AZ 150 (Galvalume base-PPSL profile sheet) of thickness not less than 0.63mm in ridges, hips, velly gutters, drip and straight flashing cut to length and bent to shape fixed with aluminium self staging screws of size 50/75mm and aluminium washer of suitable size all as specified.

Demolition of concrete of any description and in any position not otherwise specifically provided complete all as directed and as specified.

KAKOLI ENTERPRISE

UNIVERSAL TRADING

BHARAT TRADING CORPORATION