SUPPLY ERECTION TESTING COMMISSIONING FOR CREATION OF 250 KVA SUB STATION ALONG WITH HT LT NETWORK ON 11 KV NEW CHANDEKOTE FEEDER FOR PROVIDING OF POWER SUPPLY TO POLYTECHNIC COLLEGE CHANDERKOTE IN DISTRICT RAMBAN FOR AMARNATH YATRA CREATION OF

Amount

CREATION OF 250 KVA SUB-STATION ON 11 KV NEW CHANDEKOTE FEEDER FOR PROVIDING OF POWER SUPPLY TO POLYTECHNIC COLLEGE CHANDERKOTE IN DISTRICT RAMBAN

11/0.433KV, 3-phase Copper wound 250 KVA Distribution Transformers with Bimetallic Terminal Connectors Energy Level-2, , and with LV Cable Box having detachable Aluminium Gland plate

Gapless Surge Arrestor,9 KV ,10 KA ,LA with (polymer/porcelain) housing, Stn. Type

11 kV G.O AB Switch , 3-phase, 3 pole 200 Amp. Vertical type

11 kV Horn Gap Fuse Set 3 Phase 3 pole, 200 Amp

240 mm² (2Ckt) Cable, 1.1kV Grade, PVC Insulated Stranded Conductor FRLS type

9 Mtr. Long Pole( ST-540 SP33)

11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

GI Channel/Angle/Flat of sizes including clamps

Chainlink Fencing of Sub station Yard by way of mass concrete in foundations and chain link fenscing of 6 Ft Height.

Galvinized Nuts and Bolts.

Earthing of substation --Excavation of earth pit of dia 650 mm &depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 75 mmx10 mm & 50mmx6 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

3 phase, 415V, 1no of 400 Amps incoming 3 TP MCCBs (Breaking 50KA) fitted with outgoing 03 No 250 Amps SP MCCBs, 1No.100Amps 3 pole MCCB for outgoing LT cables, Distribution feeder Pillar suitable for outdoor installation , made out of CRCA sheet painted through 7-tank process with PU painted Busbars 4P, Aluminium with heat shrinkable sleeves and adequate capacities complete with all accesories 4 way Distribution Feeder Pillar.

Support Galvanised angle frame and legs (50mm x 50 mm x 6 mm) for Distribution Feeder Pillar , leg height 1m with 0.3m in soil approx [email protected] per mtr

Cement grouting for support angle legs

Wedge Connectors / PG Clamps

Danger Plates with Clamps

GI Barbed Wire for Anti Climbing

Cement bottoming 1:2:4 mix as per REC standards .5cum /pole

Painting of Poles Red Oxide

Painting of Poles Aluminium Paint

Sundry items like aluminium lugs, Jumpers, binding Tape

CT-PT along with Trivectrometer and Meter box and other accessories

Creation of HT network for 250 KVA sub station (item No 1)

9 Mtr ST pole (ST-410 SP 33)

CI Cross Arm with top bracket including Clamp

CI Channel x-Arm including Clamps and braces

11 KV Polymer Composite Pin Insulator

50 mm Sq ACSR Conductor

11 KV Polymer Composite Disc Insulator

Galvanized Nuts and Bolts

Danger Plates with Clamps

Anti Climb Device With Clamp

Earthing of Pole

Red Oxide

Aluminnium Paint

Cement Bottomming 1:2:4 mix as per REC Standard

Galvanised Stay Set Complete

11 KV Isolators double break , 3-pole, 600 Amp, horizontal mounting type with earth switch

Creation of LT Network for 250 KVA sub station

9 Mtr ST pole (ST-410 SP 33)

Clamp for Shakle Insulator

Shakle Insulators

50 mm Sq ACSR Conductor

Galvanized Nuts and Bolts

Danger Plates

Anti Climb Device With Clamp

Earthing of Pole with 20 mm Spikes

Red Oxide

Cement Bottomming 1:2:4 mix as per REC Standard

3.5 Core Cable 25 mmSq Armoured PVC Cable

Aluminium Lugs

GI wire

High Mask Lights 150 Watts on 11 Mtrs ST pole (4 Lights on one pole) along with Automatic timer,Stand for lights, 8mmsq Copper wire from Timer to lights on pole and coduit.

LED Street Lights 60 Watts Havels Make along with Brackets, 4mmsq PVC Cable, Conduit, and 6 Amps Switch (ON/OFF).

125 Kva Generators. 3 phase 415 V 50 Hz at 1500 rpm Silent Type (Reputed Make) along with AMF Panel with Complete installation along with DG Set platform and other necessary requirements.

Painting of Poles Aluminium Paint

CREATION OF 25 KVA SUB-STATION AT KGBV KUNFER

11/0.433 KV, 25 KVA 3 Phase Distribution Transformer wi Bi-mettalic Terminal Connectors Energy Level-2 (Alumminium wound)

Gapless Surge Arrestor, 9 KV , 10 KA, LA with (polymer/procelaen) housing

11 KV GO, AB Switch 3-Phase, 3 Pole, 200 Amp, vertical type

11 kV Horn Gap Fuse Set 3 Phase 200 A

25 mm Sq Single core Cable, 1.1 KV Grade, PVC Insulated Stranded Conductor FRLS type.

9 Mtr Long Pole ( ST-410 SP33)

11 KV Polymeric composite Disc Insulator 12 KV, min failing load 45 kN, Lighting Impulse 75 kV Positive and 80 kV Negative, creepage distance 320 mm.

GI Channel/Angle/Flat of sizes including clamps

Galvanized Nuts and Bolts

LT Distribution Box with 63 Amps Outdoor MCCB (Station Type)

Cement Bottoming 1:2:4 mix as per REC standards, 5 cum/pole.

Earthing of Sub-Station- Excavation of Earth pit of Dia 60 mm & depth 3000 mm, installation of earthing pipe of 40 mm Normal bore & 4 mm wall thickness & length 2.5 mtr long as per IS 1239, GI Strip for neutral earthing of size 75 mm x 100mm & 50 mm x 6 mm for connection of transformer body, GO set & lightening Arrestor as per IS 2629/85, GI nuts & Chamber made of Briks Maonary with RCC Slab cover.

Prodigy Meter

Cement bottoming 1:2:4 mix as per REC standards .5cum /pole

Painting of Poles Red Oxide

Painting of Poles Aluminium Paint

Sundry items like aluminium lugs, Jumpers, binding Tape

Creation of HT network for 25 KVA sub station (item No 4)

9 Mtr ST pole (ST-410 SP 33)

CI Cross Arm with top bracket including Clamp

CI Channel x-Arm including Clamps and braces

11 KV Polymer Composite Pin Insulator

50 mm Sq ACSR Conductor

11 KV Polymer Composite Disc Insulator

Galvanized Nuts and Bolts

Earthing of Pole

Red Oxide

Aluminnium Paint

Galvanised Stay Set Complete

11 KV Isolators double break , 3-pole, 600 Amp, horizontal mounting type with earth switch

Cement Bottomming 1:2:4 mix as per REC Standard

Creation of LT Network for 25 KVA sub station

8 Mtr ST pole (ST-410 SP 33)

Clamp for Shakle Insulator

Shakle Insulators

30 mm Sq ACSR Conductor

Galvanized Nuts and Bolts

Earthing of Pole with 20 mm Spikes

Red Oxide

LED Street Lights 60 Watts Havels Make along with Brackets, 4mmsq PVC Cable, Conduit, and 6 Amps Switch (ON/OFF).

10 Kva Generators. 3 phase 415 V Silent Type (Reputed Make) along with AMF Panel with Complete installation along with DG Set platform and other necessary requirements.

3.5 Core Cable 25 mmSq Armoured PVC Cable

Aluminium Lugs

Painting of Poles Aluminium Paint

Creation of HT Network for providing alternate/ uninterrupted power supply to 250 KVA newly created sub-station by way of tapping from 11 KV PDC line for permanent holding area for Shri Amarnath ji yatra pilgrims at PDC Complex in Chanderkote

9 Mtr ST pole (ST-410 SP 33)

CI Cross Arm with top bracket including Clamp

CI Channel x-Arm including Clamps and braces

11 KV Polymer Composite Pin Insulator

50 mm Sq ACSR Conductor

HT AB Cable 50 mmsq 3 core

Heat Shrinkable Cable Termination Kit

Suspension/Tension Clamps with eye hook

11 KV Polymer Composite Disc Insulator

Galvanized Nuts and Bolts

Danger Plates with Clamps

Anti Climb Device With Clamp

Earthing of Pole

Red Oxide

Aluminnium Paint

Galvanised Stay Set Complete

11 KV Isolators double break , 3-pole, 600 Amp, horizontal mounting type with earth switch

Cement Bottomming 1:2:4 mix as per REC Standard

DIVY ELECTRICAL ENGINEERING

Nazir Hussain

M/S CLEAR LINE ENGINEERS CONTRACTOR

GUARDIAN ENGINEERS

power control system

VEENA CONSTRUCTION CO.

M/S RATHER CONSTRUCTIONS AND TRADERS

M/S Haji Construction Company

M/s Pragya Electric and Electronics Corporation