Renewal work of Gajpur Gagaha Pandit ka nagwa Naree Road ODR Km 1 2 3 4 5 6 7 8 By HMP Distt Gorakhpur in FY 2025-26 Lot No 2 of 4

PART - A Renewal Work

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. (GSTshall be paid extra as per applicable)

Providing and applying tack coat with bitumen (VG-10) using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. (GSTshall be paid extra as per applicable)

Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects (GSTshall be paid extra as per applicable)

Construction of Subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads trasportion to site spreding grading to required slope and compacted to meet requirement of Table 300.2 as per Technical specification Clause 303.1 (3.14) (GSTshall be paid extra as per applicable) For Patri work

Providing and laying of hot applied thermo plastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area thickness of 2.5 mm is exclusive of surface applied glass bed as perIRC 35 inclduing cost of all materials , labour , Machinaries , T&P etc. requared for peoper completion of work i/c all other charges and taxes . The finishied surface to be level uniform and free from streks and holes as per MORTH specification no. 803. (GSTshall be paid extra as per applicable)

Please Enable Macros to View BoQ information