Repairing of Electric Motor Monoblock Pump Sets at IP and Delhi Secretariat Pumping Stations, along with other allied works, under JE (E and M)-I, E and M Division, Central Zone.

Repairing of Pump having following size of suction/ delivery by carrying out following works (Old material to be retained by firm). Repairing of the following dia/models of storm water pump i/c dismantling of pump set from base frame by cutting of nut bolts of suction side and delivery side and holding of delivery line by dead flange and thrust support and suction line by holding with tripod arrangement i/c loading/unloading by skilled labour, to & fro cartage along with replacement of its parts/accessories i/c gland plate/spilt gland, MS Lock nut with Lock washer, Keys of impeller & coupling, stud of Gland plate and all packings i/c oiling, greasing, replacement of required body studs & nuts, coupling tyre, required machining works for proper balancing of complete pump unit and minor repair works and dynamic balancing with existing motor i/c installation, testing and commissioning on full load etc. as required complete in all respects. (Make: Kirloskar) 1.1 Having suction of 350 mm (Model no. MF 35/35)

1.2Having suction of 250 mm (Model no. MF 25/25)

1.3 Having suction of 100 mm (Model no. SHM 80/26)

1.4 Having suction of 80 mm (Model no. SP3L)

Replacement of shaft of following dia/models of storm water pump etc. as required. (Make: Kirloskar) 2.1 Having suction of 250 mm (Model no. MF 25/25)

2.2 Having suction of 100 mm (Model no. SHM 80/26)

2.3 Having suction of 80 mm (Model no. SP3L)

Replacement of shaft sleeve of following dia/models of storm water pump etc. as required. (Make: Kirloskar) 3.1 Having suction of 250 mm (Model no. MF 25/25)

3.2 Having suction of 100 mm (Model no. SHM 80/26)

3.3 Having suction of 80 mm (Model no. SP3L)