Maharana pratap vending zone Shed work

Vending Zone Shop

Excavation in foundation in ordinary soil SI 251

Earth work in filling bc soil upto cartage 05 km.

Supply and filling in plinth with sand under floors, including watering ramming, consolidation and dressing complete. DSR No. 2.27

Cement concrete with 4cm (1/2) gauge approved stone ballast, approved coarse sand , cement in the proportion 8:4:1 including supply of all materials labour and tools and plants etc. required for proper completion of the work. SI. 281

R.C.C. works cement appoved coatsesand and 2cm (3/4) gauge approved stone ballast in the proportion 1:2:4 in slabs excluding supply of reingrcement and its binding , but including its fixing and binding the same with 24 B.W.G.I. binding wire an including necessary cantering and shuttening etc. and also including supply of all materials, labour and tools and plants etc. requred for proper completion of the work binding wire to be supplied by the contractor free of cost. SI. No. 284

Steel Reinforcement for R.C.C work including straigthening , cutting , bending ,placing in position and binding all complete upto plinth level. DSR No. 5.2.2.1

Steel work in built up tubler ( round ,square or rectangular hollow tubes etc. trusses etc .,including cutting ,hosting , fixing in position and appling a primimg coat of approved steel primer ,including welding and bolted with special shaped washers etc. complete DsR no - 10.16.1

Providing & fixing UV stablilished fiberglass reinforced plastic sheet roofing up to any pitch; including fixing with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I Limpet washers complete but excluding the cost of purlins , rafter ,trusses etc .The sheets shall be manufactured out of 2400 tex panel rovings incorporating minimum 0.3% ultra violet stabiliser in resin system under approximatly 2400 psi and hot cured . they shall be of uniform pigmentation and thikness without air pokets and shall conform to is 10192 and is 12866 . the sheet shall be opaque or translucent clear 2mm thick corrugated (2.5' or 3" or 6") as specified DsR-12.47.1

Providing & fixing UV stablilished fiberglass reinforced plastic sheet roofing up to any pitch; including fixing with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I Limpet washers complete but excluding the cost of purlins , rafter ,trusses etc .The sheets shall be manufactured out of 2400 tex panel rovings incorporating minimum 0.3% ultra violet stabiliser in resin system under approximatly 2400 psi and hot cured . they shall be of uniform pigmentation and thikness without air pokets and shall conform to is 10192 and is 12866 . EXCLUDING the sheet shall be opaque or translucent clear 2mm thick corrugated (2.5' or 3" or 6") as specified DSR NO 12.47.1

Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in orizontal/vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.1.00 mm thick with zinc coating not less than 275 gm/m²

The Fastening brackets Aluminium alloy 6005 T5/MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual component for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding till the handling over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items

Retro Name & Photos Letex Print On 3M Media Retro with pasting

Add 10% for Internal & External Electriffication

Add 2% Extra for Contigency

Add 18% GST

Please Enable Macros to View BoQ information