CERTAIN REPAIR TO E M INSTALATIONS AND OTHER CONNECTED WORKS UNDER AGE BR II FOR GTRE CABS STIR AND CEMILAC BANGALORE

Amount

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for.

M&L Wet Shortcrete(Gunniting) (M25) mix of cement concrete applied from a nozzle with compressed cleaned air and water added to the nozzle and approved admixture to attain quick setting and high strength including cutting chiseling,making good and painting should be match with existing surface as per directed by Engr-in-Charge.

S&F PVC sheets 2mm thick laminated plain coloured marbled mosiac or mottled finish laid with approved rubber based adhesive in floors and skirting including taking down old sheet complete all as specified and as directed.

S&F Steel rolling shutters with gear oprated type with bevel gear box and crank handle thickness of lath 1.25mm including top cover anchoring rod haps and staple and one shop coat of primer erected in position including taking down old rolling shutter complete.

Taking down Steel rooling shutters and refixing in same opening after greasing ,oiling making good smooth functionand painting one coat of synthetic enamel paint any size of shutter , complete all as specified and directed.

M & L prepration of new steel surface of any description, over 10cm in width or girth, not otherwise described, two coat synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed

Taking down Chowkats or Frame (without taking off shutter from the frame) exc. 1.50 Sqm but n exc 4.00 Sqm each complete.

Taking down Chowkats or Frame (without taking off shutter from the frame) n exc. 1.50 Sqm complete

Taking down shutters of any description exc. 1 Sqm and n exc. 3 Sqm each complete

Taking down shutters of any description n.exc 1 Sqm each complete

S&F Anodised aluminium powder coated frame for doors window,partition and ventilators with one or more rebates including joining cleat forfixing etc. complete all as specified

S&F Anodised aluminium powder coated door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified

S&F Anodised aluminium powder coated window and ventilators shutters, aluminium section sliding or fix type weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S & F sheet glass 5.5 mm thick ordinary quality frosted on one side in n. exc 1.5 Sqm in each pan with rubber beading as in doors and partion complete all as specified and as directed

S&F Prelaminated particle board 12 mm thick, exterior grade,prelaminated both side with decorative choice lamination &other side balancing white lamination,fixed with screws to timber frame work as in aluminium door and partion complete all as specified and as directed

S & F sheet glass ordinary quality in n exc 1.5 Sqm in each pane 4 mm thick with rubber beading as in window complete all as specified and as directed

M&L for pre-cast Providing and laying at or near ground level factory made precast kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete

M&L preparation of new concrete surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

Removing of demolition/excatated materials to a distance exc. 1.5 KM, but n.exc 5.0KM and depositing out side MD land.

M&L for PCC 1:3:6 type C2, 75 mm thick (using 40 mm graded stone aggregate) as in plinth protection finished even and smooth complete all as specified and as directed

M&L Cylindrical lock brass size Backset 60mm Knobs made of brass Pin cylinder mechnism in brass Automatic deadlocking complete all as specified and as directed

Demolition of ,brick work ,concrete or stone boulder masonry built in cement mortar complete .

M&L for pre-cast cement concrete, Type C1 (PCC 1:3:6), block masonry with solid blocks, exc 10 cm in width and setting mortar in CM 1:6, complete all as specified and as directed

M & L for Walling of random rubble (Bangalore type), regular coursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and as directed

M & L for Walling of random rubble (Bangalore type), regular coursed, well bonded, bedded and solidly hearted, built in CM 1:6 but except Stone all as specified but except stone

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses Hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc.20mm

M&L for providing PCC 1:2:4 type B1 in coping (using 12.5mm graded stone aggregate) including necessary form work complete all as specified and as directed

M&L Cement concrete work in pavement / hard standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified and as directed.

Finishing surfce of concrete pavements by brooming

Forming only 20 mm wide expansion joints in pavements 100 mm thick and filling with bituminous pre formed filled board upto approx 35 to 40mm below the top surface of slab complete all as specified and as directed

Forming only contraction (Dummy joints 65mm deep x 10mm wide and filling with bituminous pre formed filled board upto approx 30-35 below the top surface of slab complete all as specified and as directed

M&L Welding in repairs exc 2.5cm but n.exc 5cm in length and thickness of metal to be welded exc.6mm but n.exc 9mm complete all as specified and as directed

S & F TMT steel bars 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia complete all as specified and as directed

Dismantling Interlocking Paver as specified and directed.

Supply and fix Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade with gray cement and no pigment complete all as specified and as directed

Material and Labour for sand filling under floor including watering, consolidation, and well ramming complete all as specified and as directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including snap grid of any type and cover fillets complete all as specified and directed

Supply and fixing of armstrong ceiling system with fine fissured edge tiles having humidity resistance (RH) of 95%, NRC 0.34 light reflectance approx 84% Thermal conductivity K=0.052 - 0.057. W/mk colour white fire performance of class-I as per BS 476 part 6 & 7 in module size of 600 x 600 x 16 mm thick suitable ofr green building appliation with recycled content of 38-41% with Armstrong silhouette profile exposed grid system with 15 mm white flanges incorporating 6 mm central reveal in white/black colour. Silhoutte, main runners & cross tees to have mitred ends & birdsmouth notches to provide mitred cruciform junctions. The Tee sections have a galvanising of 170 gms per sqm & passed through 500 hrs of salt test. The main runner spaced at 1200 mm c/c should be securely fixe to the structural soffit using Armstrong suspension system at 1200 mm maximum c/c. The first/last Armstron suspension system at the end of each main runner should not be greater than 450 mm from adjacent wall. Cross Tees 1200 mm long should be interlocked between main runners at 600 mm c/c to form 1200 x 600 mm module. 600 x 600 mm module is fortned by fitting 600 mm long flush fitting cross Tees, Perimeter trim consist of Armstron wall angles of size 3000 x 19 x 19 mm secured to walls screws at 450 mm c/c

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for PCC 1:2:4 type B1, average thickness 40-70 mm thick (using 20 mm graded stone aggregate) as in flooring/ paving finished rough to receive floor tiles

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cm 1:6.(MAKE:HR JOHNSON/KAJARIYA/SOMANY)

Material and labour for glazed coloured ceramic tiles in vertical surfaces for wall tiles of size 450 x 300 x 7 mm thick as in dados, set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles with joint free including 10mm thick screed bed in cm 1:4.(MAKE:HR JOHNSON/KAJARIYA/SOMANY)

M&L for PCC 1:2:4 type B0, 25 mm thick (using 12.5 mm graded stone aggregate) as in roof padding finished even and smooth including demolition old concrete complete all as specified and as directed

M&L APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (Weight not less than 150 gms/Sqm) laid on primed surfaces by forced application incl bituminous primer including taking down old App sheet & bitumen confirming to IS-3384 applied @ 0.3 ltr/Sqm and applying aluminium paint @ 100 ml/Sqm complete all as specified and directed. Four course of roof treatment consist of as under :- (a) Applying one coat of bituminous primer conforming to IS 3384 @ 0.3 ltr/Sqm (b) Laying of APP based membrane as specified thickness and weight. (c) Applying one coat bitumen grade 85/25 @ 1.2 Kg/Sqm. (d) Applying one coat of aluminium paint @ 100ml/Sqm.(MAKE:M/S IWL LTD/M/S STP LTD/M/S TEXSA INDIA LTD)

Taking down plastering on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc.

M&L Rendering 15 mm thick stone masonry wall surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed

M&L Rendering 15 mm thick CM 1:4 on fair faces of Brick masonry or concrete surface wall even and smooth without using extra cement complete all as specified and as directed.(New Brick Work)

Supply only Integral waterproofing compound

M&L prepration of new surface on wall and applying two coats of distemper oil emulsion complete all as specified and as directed

M&L applying 2 coats of Exterior emulsion Finishing walls with Acrylic Smooth exterior paint of required shade applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on wall new plaster surface including cornices, plasters etc by all as specified and directed (Make/Brand Name : Asian Paints/Apex ultima, Berger Paints/Weather coat All Guard, Jenson /Nicholson/Safe Guard).

Dismanling Sructural steel work including door ,gates but excluding framed work.

S & F Mild steel framed work as in doors or gate of angle or other section gusset plate rails ladder & Hand rail and Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections)including welding securing bolts including cutting tops to shape as directed, drilling holes etc conforming to Fe 410 -W grade E 250 Quality A complete all as specified and directed by Engineer-in-Charge

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Hacking out old brocken glass of any thickness size quality or description from wooden frame or stone concrete or brick complete

S & F sheet glass 3mm thick for window ordinary quality frosted on one side in n.exc 0.75 Sqm in each pan with rubber beading as in doors and partion complete all as specified and as directed

Supply and fix Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete.

S & F in repairs vitreous china semi pedestal pattern (Anglo -Inidan Type) white or colour (excluding fixing bolts, flushing cistern and flush pipe including connection to trap and to flushing pipe anti syphonage pipe etc complete including making good to floor complete all as specified and as directed. Make : CERA

Supply only plastic water closet seat ,white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised highing device. Make : CERA, in repair

Supply and fixing in repairs vitreous china squatting pan 'Orissa' pattern size 580 x 440 mm white with integral foot rest (excluding flushing cistern and flush etc) complete all as specified and as directed Make : CERA

M&L applying one coat of exterior emulsion weather proof paint on wall old surfaces including cornices, plasters etc by scrapping/down with wire brushes and washing down and removing existing loose finishes particles etc all as specified and directed (Make/Brand Name : Asian Paints(Apex ultima), Berger Paints(Weather coat All Guard)(ht Upto 20 Mtr including all necessary scaffolding)

INtelvert

SHRI MALLIKARJUN BATTERY AND ELECTRICAL WORKS

M/S VERNEKAR AGENCIES

MARUTI AUTO MOBILE ENGINEERING

GUNAGI ELECTRICALS

POPULAR ENTERPRISES

sanjay prabhu