ADDN ALTN OF BLDG NO 351 AT 12 TAC, PROVN OF ADDL TOILET BLOCK NEAR BLDG NO P 453 AND PROVN OF SHELTER FOR CHILDREN PARK NEAR BLDG NUMBER DM 101 AND 104 AT DRONACHAL TOP BHOPAL

Amount

Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc. to store and rubbish not exc. 50m complete all as specified and as directed by the Engineer-in-Charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sqm each complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparing of newly plastered surface of walls and applying one layer of white putty and two coats of oil bound distemper over a coat of compatible primer etc complete all as specified and as directed by the Engineer-in-Charge.

M&L for rendering 15 mm thick in two layers over brick work or concrete surfaces, 10mm thick in cement plaster 1:4 backing coat and 5mm thick in cement plaster 1:4 mixed with WPC complete all as specified and as directed by the Engineer-in-Charge. Note: WPC shall be measured and paid separately.

M&L for preparation of newly plastered or unplastered surfaces in walls soffits, facia, chajjas and applying two coat of exterior weather proof water based emulsion over a coat of compatible primer complete all as specified and as directed by the Engineer-in-Charge.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) , removing serviceable tiles to store and rubish of the premisses complete all as specified and directed by the Engineer-in-Charge.

M&L for coloured Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular), coloured tiles, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed in CM 1:6 all as specified and directed by the Engineer-in-Charge..

M&L for coloured Glazed ceramic tiles in vertical surface 450 X 300 X 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to matchtiles in vertical surface including 10mm thick rendering in CM 1:4, all as specified and directed by the Engineer-in-Charge.

S&F vitreous china wash down water closet pan (pedestal pattern), white and trap including seat cover, fixing bolt, connection to drain (or out going pipe) and to flushing pipe, antisyphonage pipe, etc complete all as specified & as directed by the Engineer-in-Charge.

S&F of 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified & as directed by the Engineer-in-Charge.

S&F two way bib tap 15mm dia all as specified and directed by the Engineer-in-Charge.

S&F 15mm bore dia Chromium plated stop valve/angle cock, but fancy type, chromium plated with long shank and cup (concealed type) and fixed complete all as specified and directed by the Engineer-in-Charge.

S&F Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed by the Engineer-in-Charge..

S&F PVC connection 15mm dia of length not less than 600mm with both ends, brass fly nut for water supply complete all as specified & as directed by the Engineer-in-Charge.

S&F Health faucet( ABS Body) mild steel CP suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook incl making connections and fixd in position complete in all respect as specified by the Engineer-in-Charge.

S&F CPVC pipe 20mm dia of grade SDR-11 (class-I) including all CPVC and brass fittings fixed to wall, floor or ceiling or laid in floors etc complete all as specified and directed.

Cutting channels, grooves or rebates n exc 15cm girth, and trimming surface all as directed by Engr-in-charge

S&F in repair 110mm dia PVC (SWR) pipe and single socketed in any length with rubberring joint laid in trenches, floors or fixed to walls.

S&F 110mm bore PVC (SWR) junction (single ‘T’) equal or unequal with access door.

S&F 110mm bore PVC (SWR) bend in any radius.

S&F solid PVC door frame(approved color) of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, fixing in opening as per specification and drawing complete all as specified and directedby the Engineer-in-Charge.

S&F Factory made solid panel PVC door shutter(approved color and pattern) 30mm thick (stiles) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap inserted for top rail and bottom rail. Penelling of plain colour PVC sheet to be fitted to the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site all as specified and directed by the Engineer-in-Charge.

S & F 100mm size Butt hinges, medium weight cold rolled, stainless steel and fixed complete all as specified and as directed.

S&F Aluminum tower bolts of extruded section of size 150mm all as specified and directed.

S&F 150 mm size Extruded aluminium alloy handles, fabricated type., anodised handles all as specified and directed by the Engineer-in-Charge.

M&L for 18 - 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed by the Engineer-in-Charge.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) frame and shutters with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, suitable aluminum handle, handle lock/ mortice lock for door shutter etc all complete as per architectural drawings complete all as specified and directed.

S&F mild steel Mortice lock 4 lever, vertical type, size 100 mm complete all as specified and directed

S&F 4.8mm thick tinted sheet glass fixed in window/door shutter ordinary quality n exc. 0.5sqm in each pane complete all as specified and directed by the Engineer-in-Charge..

Supply only galvanised mild steel wire clothes 0.46 mm nominal dia of wire and average width of aperture 1.4 mm complete all as specified and as directed . Note : Fixing only rate is included in window/door shutter item considered therein.

S&F for Roof trusses (Framed), trussed, purlins, crane gantries, rails and fastening and heavy brackets framing(Beam, tee, angle, channel or flat section) including distance pieces, cleats, etc. Gde Fe 410-W (Gde-E-250) quality-A all as specified and directed by the Engineer-in-Charge.

S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to I.S.1161-1998 grade St-240 all as specified and directed.

M&L for Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc Gde Fe 410-W (Gde-E-250) quality-A all as specified and directed.

S&F Mild steel screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or diameter of neck 16 to 20mm square nut bolt exc 22.5 cm but n exc 30 cm long all as specified and directed by the Engineer-in-Charge.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick (approved colour ) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and bitumen washer all as specified and directed by the Engineer-in-Charge.

S&F Plain, galvanised, mild steel sheeting 1mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 all as specified and directed by the Engineer-in-Charge.

M&L for preparation of new steel surfaces over 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed by the Engineer-in-Charge.

Dismantling of interlocking paver block/ Bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons, etc. (each layer) Laid dry and pointed etc complete all as specified and directed by the Engineer-in-Charge.

Demolition of cement concrete in ground floors and pavings not exc. 15 Cm thickness (below/above ground level) including floor finishes complete all as specified and directed by the Engineer-in-Charge.

Surface dressing in hard dense soil n exc 15 cm deep

M&L for cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete to be laid in required slope complete all as specified.

M&L for non skid cramic tiles colured of size area of each tile exc 0.18 sqm but not exc 0.38 sqm in flooor and in skirting etc, jointed in neat cement slurry and pointed in white or colours cement to match complete all as specfied and directed over and including 15 mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed by the Engineer-in-Charge.

Refixing of Interlocking paver block / bricks in floors, channels etc over sand cushioning at location not exc 50 mtr distance etc complete all as specified and directed by the Engineer-in-Charge.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade (with grey cement and no pigment) over sand cushioning complete all as specified and directed by the Engineer-in-Charge .

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by the Engineer-in-Charge.

M&L for Providing, cement concrete 1:2:4 type B1 in in lintels upto 1.5m clear span, cills, steps, benching, coping seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including neccessary formwork all as specified and directed by the Engineer-in-Charge.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and framework etc all as specified and directed by the Engineer-in-Charge.

M&L for Providing & fixing false ceiling at all heights (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, 12mm thick semi perforated micro tegular edges having moisture micro tegular edged GRG false ceiling or 10 mm content less than 2%, humidity resistance edged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling 8225:1987, ncombustible as per BS tiles 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of mainT runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-inCharge.

M&L for complete removal of existing treatment using mechanical wall sander ( having mechanical vaccum mechanism) with RPM not less than 1500, sanding pad of 80 grit of dia 7"/ 9"on walls (external surface) and applying one coat of exterior wall care putty 1.5 to 2mm thick complete all as specified and as directed

M&L for Preparation of old decorated surfaces of walls, fascia chajjas etc incl brooming and applying two coats of exterior weather proof water based emulsion paint over and including one coat of compatible primer complete all as specified and directed by the Engineer-in-Charge.

M&L for preparation of old decorated plastered or unplastered surfaces and applying two coat of white wash on ceiling complete all as specified and directed by the Engineer-in-Charge.

M&L for complete removal of existing treatment on walls using and applying 1 coat of wall care white putty 1mm thick and applying 2 coats of oil bound distemper including a coat of compatible wall priming paint complete all as specified and directed by the Engineer-in-Charge.

M&L for preparation of old painted surfaces of wood and wood based material of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by the Engineer-in-Charge.

M&L for Reinforced cement concrete (nominal mix) Type B0, 1:2:4 (12.5mm graded aggregate) as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses all as specified and directed by the Engineer-in-Charge.

M&L for formwork to sides of concrete curved foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter surface flat with fair finished surfaces all as specified and directed by the Engineer-in-Charge.

M&L for Formwork to faces of curved walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter with fair finished surfaces all as specified and directed by the Engineer-in-Charge.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed by the Engineer-in-Charge.

All as per item No 58 above but 6 to 8mm dia in stirrups, spacers and binders all as specified and directed by the Engineer-in-Charge.

M&L for 25mm brass fountain water sprinkler multi layer nozzle set fixed in 25mm dia pipeline in water fountain all as specified and directed by the Engineer-in-Charge.

M&L for Earth work in dense soil in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed by the Engineer-in-Charge.

M&L for Earth work in soft/disintregated rock in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed by the Engineer-in-Charge.

M & L Formwork to sides of concrete foundations, footings, columns, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter with rough finished surface all as specified and directed by the Engineer-in-Charge

M & L Formwork to sides of pillars, posts, struts, piers, columns and stanchions square or rectangular in plan to provide rough finish surface to concrete all as specified and directed by the Engineer-in-Charge.

M & L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed by the Engineer-in-Charge.

M & L for Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and as directed by the Engineer-in-Charge.

M & L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.with rough finished surfaceall as specified and directed by the Engineer-in-Charge.

M&L for formwork to edges of rough finished surfaces of concrete flats,treads,breaksin floors,window cills,concerte railings,opening in concrete walls,floors and roof n exc 20 cm wide and side of RCC /PCC bands in walls,horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide complete all as specified and as directed by the Engineer-in-Charge.

M&L for Reinforced cement concrete (Design Mix) Type M-25 (20 mm graded aggregate)in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed by the Engineer-in-Charge.

M&L for Reinforced cement concrete (Design mix) Type M-25 (20 mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by the Engineer-in-Charge.

M&L for Reinforced cement concrete (Design mix) Type M-25 (20 mm graded aggregate) in Chajjas complete all as specified and directed by the Engineer-in-Charge.

M&L for Reinforced cement concrete (Design mix) Type M-25 (20 mm graded aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by the Engineer-in-Charge.

M&L Reinforced cement concrete (Design mix) Type M 25 (20 mm graded aggregate)in Columns , pillars ,Piers ,Posts and struts complete all as specified and directed by the Engineer-in-Charge.

M&L for Brick work with Fly ash brick straight or curved on plan exc 6 m mean radius, buit in CM 1:6 all as specified and directed by the Engineer-in-Charge

M&L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in , CM 1:4 all as specified and directed by the Engineer-in-Charge

M&L 15mm thick rendering in CM 1:6 on other than fair faces of brick/concrete surfaces finished even and smooth w/o using extra cement.

Supply only integral water profing compound (WPC) mixed with cement mortar complete all as specified and directed.

M&L for 25mm thick cement concretetype B-1 1:2:4 (20 mm graded aggregated) Complete all as specified and directed by the Engineer-in-Charge.

M&L for Screed bed or beding layer of mortar 15 mm thick for laying floor finish in CM 1:4 Complete all as specified and directed by the Engineer-in-Charge.

M & L for cement conrete (1:3:6) type C-1 using 20mm graded stone aggregate 75mm thick as in plinth protection finished fair even laid in bays n.exc 2m in length and joints filled with bitumen mastic 1:3 complete all as specified and directed by the Engineer-in-Charge.

M & L for applying Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work complete all as specified and directed by the Engineer-in-Charge.

M & L for Preparation of new plastered surface wall and applying Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed by the Engineer-in-Charge.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed by the Engineer-in-Charge.

Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note:- stainless steel butt hinges and necessary SS screws shall be paid separately)

S&F for 150 mm aluminium handles, cast type, anodised complete all as specified.

S&F for ISI Marked 150mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified.

S&F 300mm long aluminium allooy anodised sliding door bolts with hasp and staple (bolt type) & fixing clip of sheet cast or extruded section & fixing bolt & sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F for 100mm Mild steel butt hinge and SS screws complete all as specified and directed by the Engineer-in-Charge.

S&F 25mm bore gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed by the Engineer-in-Charge.

Supply & fixing of framed work such as grills, gratings, cooler stands etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 incl necessary fixing to walls as directed by the Engineer-in-Charge.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and directed by the Engineer-in-Charge.

S & F Vitreous China squatting pan, `Orissa` pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with PVC SWR P or S trap complete all as specified and as directed by the Engineer-in-Charge.

S&F of vitreous China wash basin, white, flat back, size 450x300mm including PVC connections 15mm size with PTMT nuts of length 450mm, 40mm pvc waste pipe of suitable length, brackets,and cutting for and pinning in ends of brackets or erecting stand including waste coupling complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing for ISI marked 15mm bore, fancy type bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by the Engineer-in-Charge.

S&F 15 mm Pillar taps, cast copper alloy, chromium plated with capstan heads, chromium plated, screwed down high pressure, with or without letter hot or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixing complete all as specified and directed by engr in charge.

Supply and Fixing of 10 ltrs capacity PVC Valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets flushing cistern, PVC flushing pipe of suitable length and PVC connection 450mm long. complete all as specified and as directed by the Engineer-in-Charge

S&F of Vitreous China Urinal Half Stall type, white with union for discharge pipe including waste pipe and urinal spreader, Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) fixing with 15mm dia pipe complete all as specified and directed by the Engineer-in-Charge.

S&F brass chromium plated tubular towel ring complete all as specified and as directed by the Engineer-in-Charge

S & F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by the Engineer-in-Charge

S&F chromium plated grating doom 100 mm dia with waste hole.

S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floorss complete all as specified by the Engineer-in-Charge..

S & F 75mm bore PVC (SWR) bends of any radius with access door, complete all as specified by the Engineer-in-Charge.

S & F PVC 110mm bore (SWR) branch piece, double (double Y) with access door equal or unequal, complete all as specified by the Engineer-in-Charge.

S & F for 110mm bore PVC (SWR) junction double (double T) with access door equal or unequal, complete all as specified by the Engineer-in-Charge.

S & F for 75 mm bore PVC (SWR) junction (single T) with access door equal or unequal, complete all as specified by the Engineer-in-Charge.

S & F for 110mm bore PVC (SWR) junction( Single T) with access door equal or unequal, complete all as specified by the Engineer-in-Charge.

S & F 110/75mm bore PVC (SWR) vent cowl, complete all as specified

M & L for 75mm bore PVC (SWR) Multi trap, plain with grating including jointing with solvent cement complete all as specified and as directed by the Engineer-in-Charge.

M&L for 150 mm dia Reinforced concrete pipes, class NP3, laid and jointed complete with collars as specified and directed by the Engineer-in-Charge.

M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 200 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed by the Engineer-in-Charge.

M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed by the Engineer-in-Charge.

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 150 mm internal dia of pipe complete all as specified and directed by the Engineer-in-Charge.

M&L for Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:4 complete all as specified and directed by the Engineer-in-Charge.

Removing excavated material (rock) not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point all as specified and directed by the Engineer-in-Charge.

S&F 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I.

S & F 20 mm dia ball valve PTMT, high pressure with polythene float and fly nut complete, screwed for iron pipe with epoxy coated aluminium rod all as specified and directed by the Engineer-in-Charge.

S & F gunmental, globe or gate valves 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed by the Engineer-in-Charge.

M & L for preparing RCC roof surfaces with wire brush drying and cleaning to remove all foreign materials and washing with water to remove loose particle and applying APP modified bituminous water proofing membrane with polyester reinforcement and plain finish of 3 mm thick (total weight of the finished membrane not less than 3.8 kg/ sqm ± 5 % per sqm) confirming to IS 16532: 2017 over a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25⁰C, 0.87-0.89 kg/ litre and viscosity 70-160 cps, laying over the primer coat using Butane Torch and sealing all joints, overlapping etc. as per Annex D of IS 16532: 2017 complete all as specified and as directed by the Engineer-in-Charge.

Material & labour for rendering 10 mm thick in cement plaster 1:4 over RCC slab mixed with water proofing compound @ 3% by weight of cement or manufacturer instruction all as specified and as directed by the Engineer-in-Charge. (Note;- water proofing compound shall be measured and paid separately as supply only)

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified and diretced and as directed by the Engineer-in-Charge.

M&L for rendering 5mm thick in cement mortar 1:3 in concrete surface of ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L for vitrified light shade tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding ).36 Sqm, in floors etc, set and jointed in neat cment slurry and pointed in white or coloured cement to match all as specified and directed by the Engineer-in-Charge.

All as per item No 122 above but on vertical surface including 10 mm rendering in CM 1:3 complete all as specifed and directed.

S&F for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge.

S&F solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers

M&L for 25mm dia Stainless steel curtain rod decorative type incl curtain rings & nobs, Complete all as specified and diretced

Preparation of newly plastered surfaces of ceiling and applying three coats of white wash on ceiling complete all as specified and diretced .

S&F of 12 mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required including Necessary Stainless Steel fitting like Halvdle of Size 300mm long and other connecting items compolete all as specified and directed.

S&F of double action floor spring hydraulically regulated, made up of minium 1.25mm thick aluminium alloy sheet fondation box , main body with stainless steel cover govering pivot made of brass , other parts made of mild steel heavy duty and fixed complete all as specified and diretced.

M & L for provisioning and applying two coats of aluminium paint over newly laid APP membrane surface of non accessible roof complete all as specified and directed.

Taking down carefully copper & aluminum point wiring for light, fan, socket or power complete and making good distrubuted surfaces of walls floors etc. Including switch & socket etc complete all as specified and directed by Engr-in-charge.

S & F High quality fountain lights with chrome plated stainless steel housing, multi colour, with ingress protection of IP68, with a built in overheat sensor system , integrated electronic driver, Optimized heat dissipation for ensuring high LED life span , Base type - 6 inch/9 inch, wattage - 10 to 30 Watt (including testing, commissioning ) complete all as specified and directed by EIC

Supply and fix in repair of switch piano type flush type single pole one way 5 Amps, ISI marked complete all as specified and directed by Engr-in-charge.

S & F Recess/ceiling mounting as suitable in existing fitting ultra slim 36 W LED 2x2 edge-lit tile in Aluminium Extruded housing with full opal diffuser suitable for perfect lighting conditions for most varied visual tasks in offices and general areas complete all as specified and directed.

Material and labour for Weather proof Twin Core cable 2.5 sqmm, 18 voltage drop mV/A/m

Supply and Fix Sheet metal enclousures for DB 2 way , single door , 240 Volts

Supply and fixing of MCB single pole, 6 to 32 Amps with thimble suitable for existing wires complete all as specified and directed by Engr-in-charge.

Excavation in trenches not exc 1.5 metre wide & not exc 1.5 mtr in depth: for foundationetc or for manholes, laying of pipe in any type of soil and getting out complete all as specified.

Returning filling in soil, including spreading, leveling watering & well rammng in layers not exc 25cm thick complete all as specified and directed.

Removing excavated material (Soil) to a distance not exc 50 mtr & depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified & diected.

Material and labour for cement concrete in road surfacing, filling and mass concrete type B1, 1:2:4 (20mm graded stone aggregate) for repairs to road cutting for laying of pipe lines / UG cables all as directed by Engr-in-charge.

Supply and fixing after proper testing of openwell Submersible Pump Set single phase with a motor power of 0.5hp , voltage of 230V, 5 Amp, 0.5 hp, 50LPM complete all as specified and directed by EIC.

Supply , fixing & laying 20 mm bore GI pipe medium grade with one socket both end threaded in any length including cutting threading connection in new or old position and all type of GI new fittings for laid in trenches/walls/floors as directed by Engr-in-charge..

Supply and fixing with complete testing of brass gate valve, complete all as specified and directed by EIC.

Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade, PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with mild steel/pressed steel sunken boxes( with earth dolly) duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, including PVC insulated multi-stranded copper conductor 1.5 Sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for the following:-

One light point controlled by one switch.

One exhaust Fan /ceiling fan point controlled by one switch.

One 3 pin socket outlet on same board.

One 3 pin socket outlet 5 Amps on independent board.

Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 4 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade, PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with mild steel/ pressed steel sunken boxes with earth dolly duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets etc, including PVC insulated multi-stranded copper conductor 4 Sq mm nominal cross sectional area single core cable as earth continuity conductor to common earth and connecting to earth dolly complee all as specified and directed at site for the one 3/5 pin 15/16 amps socket outlet independent.

Supply and fix in repair incl making existing surface good sheet metal enclosures with socket plug top and MCB's with two pin and earth plug and socket complete with one single pole MCB 240 V grade 20 Amp.(A/C Box) complete all as specified and directed by Engr-in-charge.

Supply and Fix in repair of modular switch single pole one way 16 Amps, 1 module ISI marked complete all as specified and directed by Engr-in-charge.

Supply and Fix in repair of modular socket single pole one way 6/16 Amp-2/3 PIN, 2 module ISI marked complete all as specified and directed by Engr-in-charge.

Supply and Fix modular switch single pole one way 6 Amps, 1 module ISI marked complete all as specified and directed by Engr-in-charge.

Supply and Fix in repair of modular Socket single pole one way 6 Amp-2/3 pin, 2 module ISI marked complete all as specified and directed by Engr-in-charge.

Supply and Fixing of modular white cover plate with frame, 4 module ISI marked complete all as specified and directed by Engr-in-charge.

Supply and Fixing of modular white cover plate with frame, 6 module ISI marked complete all as specified and directed by Engr-in-charge.

Supply and Fixing of modular white cover plate with frame, 8 module ISI marked complete all as specified and directed by Engr-in-charge.

Supply and Fixing of modular metal flush box ,4 module ISI marked complete all as specified and directed by Engr-in-charge.

Supply and Fix of modular metal flush box, 6 module ISI marked complete all as specified and directed by Engr-in-charge.

S & F round/square shape 15 Watt 230 Volt AC recessed/surface mounted with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with 2/3 core flexible copper conductor cable of suitable size and type of housing aluminium complete all as specified and directed by Engr-in-charge.

S&F in repair of LED Building security light fitting 1x 25 W new generation energy saving and environmental friendly long life made up of pressure die-cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP opening seprate driver compartment with IP 66 protection and impact resistance of IK07 for mounting existing bracket complete including all accessories pre-wired with 3 X 1.5 sqmm single core mutistrand copper conductor cable up to celing rose/ terminal box and proper earthing connection must be provided, all as specified and directed by Engr-in-Charge.

S & F in repair Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body all as specified and directed by Engr-in-Charge.

S&F Exhaust Fan 300 mm sweep with louver complete metal body complete all as specified and directed by Engr-in-Charge.

S & F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm 3 core complete all as specified and directed by EIC.

Supply and fixing in repair of MCB single pole with neutral 240 volts 25 to 40 Amps with thimble suitable for existing wires complete all as specified and directed by Engr-in-charge.

Earthing complete with galvanised iron earth plate electrode 60cmx60cmx6mm thick , burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised steel wire 4 mm dia by means of galvanised nuts, bolts, check nuts and washers including excavation and earth work, PCC 1:3:6 type C-2 pit, PCC pit cover 1:2:4 type B-1 with handle, GI protection pipe 15 mm bore light grade and 20mm medium grade GI watering pipe, Funnel , wire mesh etc complete as shown in electrical Plate No.3 of SSR Part-I connected to earthing test point and metal part all as specified including testing on completion complete all as specified and directed by Engr-in-charge.

Supply and lay pipe galvanized "medium class" including fittings 25 mm (1") dia

S & F PPR gate valves ( brass insert) of 25 mm bore

Supply and fixing of switch socket combination outlet 3 pin, 16 Amp , flush type ISI marked complete all as specified and directed by Engr-in-charge

S & F of sheet metal enclosure for MCB DB, SPN 230 Volts 200 amps rated busbar 8 way double door complete all as specified and directed by Engr-in-charge.

Material & Labour for sub main wiring with two run of 6 sqmm size PVC insulated multi stranded copper conductor FRLS cable (Nominal area) and one run of 6 sqmm size PVC insulated unsheathed solid core copper conductor cable drawn in surface/ recessed steel/ PVC conduit/ PVC casing capping of required size complete all as directed by Engr-in-charge..

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed by Engr-in-Charge.

S & F of 1 x 18 watt LED tube light fitting basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver, LED Decorative luminaire with suitable for lamps LED Light high efficiency LED driver,Optimized heat dissipation for ensuring high LED life span.

RAJPATI CONSTRUCTION

City buildcom builders & devlopers

AJIT ENTERPRISES

H K TRADING

MODI CORPORATION