SUPPLY OF TOOLS EQUIPMENTS AND MACHINERY

Amount

TRADE(INFORMATION AND COMMUNICATION TECHNOLOGY SYSTEM MAINTENANCE

Connecting screwdriver 100MM

Neon tester 500 V

Screw driver set SET OF 5

Insulated combination pliers 150 mm

Insulated side cutting pliers 150 mm

Long nose pliers 150 mm

Soldering iron 25 W. 240 V

Electrician knife

Tweezers 100mm

Digital Multimeter

Soldering Iron Changeable bits 15 W

De- soldering pump

Server Computer CPU: 32/64 Bit i3/i5/i7 or latest processor, Speed: 3 GHz or Higher Server Computer

Laptop, Notebook

Intel Mobile Desktop based PC with LCD monitor CPU: 32/64 Bit i3/i5/i7 or latest processor, Speed: 3 GHz or Higher. RAM:-4 GB DDR-III or Higher, Wi-Fi Enabled. Network Card: Integrated Gigabit Ethernet, with USB Mouse, USB Keyboard and Monitor (Min. 17 Inch. Licensed Operating System and Antivirus compatible with trade related software.

Tablet

Power Meter

Anti static wrist wraps

Digital Multimeters

Card Reader

Laptop kits

Laptop spares: Cabinet with display, memory, hard disk, battery pack, keyboard membrane, chargers

SMPS Trainer kit

UPS Trainer kit

Laptop kits

Windows Server Operating System

Windows Operating System

Linux Operating System

Network Management Software

MS Office

Anti-virus software

Data recovery software

LINUX Server Operating System (Samba / Su-se)

Fire Fighting Equipments

Hardware and Network Trainer Kit

Managed Layer 2 Ethernet Switch 8 port

Managed Layer 2 Ethernet Switch 16 port

Managed Layer 2 Ethernet Switch 24 port

Managed Layer 3 Ethernet Switch 8 port

Managed Layer 3 Ethernet Switch 16 port

Managed Layer 3 Ethernet Switch 24 port

Network Training System

LAN Protocol Simulation and Analyser Software

Network cables – UTP

Network Cables – coaxial, flat, ribbon

Crimping Tools

Network Camera (Outdoor)

Network Camera (Indoor)

TRADE-MECHANIC CONSUMER ELECTRONIC APPLIANCES

Connecting screwdriver 100MM

Neon tester 500 V

Screw driver set SET OF 7

Insulated combination pliers 150 mm

Insulated side cutting pliers 150 mm

Long nose pliers 150 mm

Soldering iron 25 W. 240 V

Electrician knife 100 mm

Laptops latest configuration

Digital Multimeter (3 3/4 digit) 4000 counts

Soldering Iron Changeable bits 15 W 240 v

De- soldering pump electrical heated, manual operators 230 V, 40 W

Laser jet Printer

Electronic circuit simulation software with 6 user licenses Circuit Design and Simulation Software with PCB Design with Gerber and G Code Generation, 3D View of PCB, Breadboard View, Fault Creation and Simulation.

Different types of electronic and electrical cables, connectors, sockets, terminations.

Different types of Analog electronic components, digital ICs, power electronic components, general purpose PCBs, bread board, MCB, ELCB

SMD Soldering & De-soldering Station with necessary accessories

Microcontroller kits (8051) along with programming software (Assembly level Programming) Core 8051, ready to run programmer for AT89C51/52 & 55, programming modes Keypad and PC circuits. Detailed learning content through simulation software.

Application kits for Microcontrollers 6 different applications 1. Input Interface: 4x4 Matrix Keypad, ASCII Key PAD, Four Input Switch 2. Display Module 16X2 LCD, Seven Segment, LED Bar Graph 3. ADC/DAC Module with most popular DC/DAC0808 4. PC Interface: RS232 & USB 5. Motor Drive: DC, Servo, Stepper 6. DAQ: Data Acquisition to sense different sensors signals

Sensor Trainer Kit Containing Following Sensors 1. Thermocouple 2. RTD 3. Load Cell/ Strain Gauge 4. LVDT 5. Smoke Detector Sensors 6. Speed Sensor 7. Limit Switch 8. Photo sensors 9. Opto-coupler 10. Proximity Sensor Graphical touch LCD with inbuilt processor for viewing the output waveforms, In built DAQ, and standard processing circuits like Inverting, Non – Inverting, Power, Current, Instrumentation Differential Amplifier, F/V,V/F,V/I,I/V Converter, Sensors:RTD,NTC Thermistor,LM35 Thermocouple, Gas(Smoke) Sensor, Load cell, LVDT Sensor, Speed Sensor

Mobile phone trainer 2G/3G/4G dual sim GSM handset Frequency measurement and band verfication real time mobile operation

Smart phone of different make (android) REALME/README

Solar Training Kit/ Simulator With built in meters for DCV, DCA, AC multifunction Meter (for ACI, ACV, Power,Frequency), Protection Circuits, BS-10 terminals for making the connection, Single/ Dual axis tracking system Charge Controller: PWM based MPPT, Charging Stage: Bulk, Absorptions and FloatSolar Training Kit/ Simulator

Fire Buckets

Miilli Ammeter (AC) 0-200mA

Milli Ammeter (DC) 0-500 mA

TRADE-COMPUTER OPERATOR AND PROGRAMMING ASSISTANT

Wi–Fi Router With Wireless Connectivity

Structured cabling in Lab to enable working with Wired Networks for Practical

Internet Connectivity Broadband connection with min. 2 mbps speed

Digital Web Cam High Resolution(3.1 mp or higher)

DVD or Blu-Ray Writer 24X or higher external (usb)

RJ-45 Crimping Tool

4U for 24 port Network Rack

3.5 digit handheld type. Digital Multimeters

Standard Screw Driver Set

Mini Dongle for Bluetooth devices Connection USB

Headphone &mic. set Wired

Sound System 2:1

1 TB External Hard Disk

Patch Panel 24 Port

LAN Tester UTP cat5 cable tester (RJ 45)

Punching Tool for punching RJ 45 socket with cat 5 cable .

MS Office 2010 (professional) or the latest version available at the time of procurement

Dual Desk or Chair and Tables for TraineesStandard

White Board minimum 4X6 feet

Fire Extinguisher CO2 2 KG

Fire Buckets Standard size

Tally ERP 9 or Latest

TRADE-WELDER

File half round bastard 300 mm

Screw Driver 300 mm blade .

Letter punch 6 mm

Bench grinder fitted with fine grain size silicon carbide green griding wheel

Suitable gas welding table with fire bricks

portable abrasive cut off machine

Welding simulators for SMAW

Welding simulators for STAW

Welding simulators for SMAW

Rubber hose clips

TRADE-DRESS MAKING

Measuring tool 150 mm

Machine attachment

Dislay Board covered with glass or acrying sheet 120 * 90 cm

Printer colour laser

Work station with chair

Revolving chai without arms

Storage almirah

TRADE - MACHINIST

Surface plate 400 mm x 400mm grade

Marking off table 1200 x 1200 x 600 mm high with stand

Scribing block universal 300 MM

V- Block 100/7 – 80 – A

300 mm Try square

Outside spring caliper 200 mm

Divider spring 200 mm

Inside spring caliper 200 mm

Straight edge steel 1 meter

Straight edge steel 500 MM

Steel tape 2 meter in case

Steel rule 60 cm graduated both in English & Metric units

Sprit level 2V 250, 05 meter

Hammer B.P. 800 gms with handle

Screw driver, heavy duty 300 mm with handle

Hammer lead 1 kg.

Spindle blade screw driver 100 mm

Allen Hexagonal keys 2.5 to 12

Spanner D.E. series 2 (set of 7 pieces)

Adjustable spanner 300 mm

Reduction sleeve Morse 1-1

Reduction sleeve Morse 3-1

Reduction sleeve Morse 4-1

Reduction sleeve Morse 4-2

Reduction sleeve Morse 5-1

Reduction sleeve Morse 5-2

Reduction sleeve Morse 6-1

Angle plate size 200 x 100 x 200 mm

Angle plate adjustable 250 x 150 x 175 mm

Solid parallels in pairs (different sizes) in Metric

Oil Can pressure feed 500 mg

Oil stone 150 x 50 x 25 mm

Number drills H.S.S. (parallel shank)

Punch letter set. 3 mm

Punch number set 3 mm

Twist drills 3 mm to 13 mm in step of 0.5 mm (parallel shank)

Drill Chuck 0-13 mm with taper shank

Centre drill A 1 to 5

Grinding wheel dresser (diamond

Grinding wheel dresser Huntington type

Clamps C 100 mm

Clamps C 200 mm

Tap and Die set in box metric pitch (6 mm to 12 mm)

Drill H.S.S. taper shank (6 mm to 12 mm in step of 0.5 mm

File Half round 2nd cut 250 mm

File triangular smooth 200 mm

Needle file set

File square 2nd cut 250 mm

Reamer 6 mm to 25 mm by 1 mm

Reamer adjustable 10 mm to 15 mm length 75 mm

Tool bits H.S.S. 6 mm square

Tool bits H.S.S. 10 mm square

Tool bits holder (Armstrong) L.H

Tool bits holder (Armstrong) R.H.

Assorted tools and bit holders for lathe, shaper, slotter& planner in different shapes and sizes

Hacksaw frame adjustable 250-300 mm with blades

Table chuck 75 mm jaw swivel base

Bench vice 100 mm jaw

Machine vice 200 mm swivel base

Machine Vice Swivel Base -150 mm

Hand vice 50 mm jaw

Radius turning attachment

Angle turning attachment

Compound angle vice (standard sine)

Universal Machine Vice 100 mm

Universal Table Angle Plate 150 X 150 X 150 mm

Shaper tool holder turret type to suit the machine

Base chuck for slotter to suit the machine

Shaper indexing center to suit the machine

Knurling tools (set of 3) straight and diamond

Plier cutting 200 mm

Carbide tipped tools of different sizes and shapes (throw away tips)

Hand hammer 1 kg With handle

Digital Multimeter 0 to 500 V

Variable Resistance Box Resistors With 220Ω

Variable Resistance Box Resistors With 150Ω

Variable Resistance Box Resistors With 1kΩ

Variable Resistance Box Resistors With 33Ω

Variable Resistance Box Resistors With 100Ω

Variable Resistance Box Resistors With 1.2Ω

DC Battery With Cap 9V

Dual Power Supply (230V, 50Hz, Fuse-800mA)

Solder Iron (350V), Solder Lead, PCB Board (Groove Board), Solder Wick

Inductor (400 Turns, , I-Core , E-Core, U- Core, Laminated Core

Inductor (200 Turns, , I-Core , E-Core, U- Core, Laminated Core

Inductor (600 Turns, , I-Core , E-Core, U- Core, Laminated Core

Inductor (1200 Turns, , I-Core , E-Core, U- Core, Laminated Core

Relay (5V) , LED (5V)

Function Generator (230V, 50Hz, Watts-12VA, Fuse- 150mA)

Bread Board

Synchronous Motor 240V, 60rpm), Capacitor For Synchronous Motor (0.8mf ± 5% 450 VAC)

Power Chord Connecting Probes, Single Strand & Multi strand Wires

Power Supply (0-30V DC, 3A)

SENSOR KIT I. Mounting Plate

II. Power Distribution Box (24V DC, 4A)

III. Counter Box (10-30V DC/0.05A)

IV. Indication Box (24V Dc)

V. Material Box

VI. Inductive Sensor (10-30 V DC, PNP, NO, 5mm (Range))

VII. Capacitive Sensor (10-30 V Dc, PNP, NO, 2- 8mm(Range)

VIII. Magnetic Sensor (10-60 V DC , PNP, NO, 60mm (Range))

IX. Ultrasonic Sensor (20-30 V DC, PNP, NO, 80- 300mm(Range))

X. Connecting Wires

XI. Motor With Control Unit (24V DC,1A)

Milling Cutter - Cylindrical Cutter Ø 63 mm, 90 mm Length and 27 mm Bore Diameter

Milling Cutter - Cylindrical Cutter Ø 80 mm, 90 mm Length and 27 mm Bore Diameter

Milling Cutter Side and face cutter dia 100 X 10 X 27 mm

Milling Cutter Side and face cutter dia 100 X 12 X 27 mm

Milling Cutter Side and face cutter dia 160 X 10 X 27 mm

Milling Cutter Side and face cutter dia 160 X 16 X 27 mm

Milling Cutter - Side and face cutter dia 200 X 20 X 27 mm

Milling Cutter - Side and face cutter dia 80 X 8 X 27 mm

Milling Cutter - Equal Angle Cutter 45˚/100 mm x 27 mm bore dia

Milling Cutter - Equal Angle Cutter 60˚/100 mm x 27 mm bore dia

Milling Cutter - Equal Angle Cutter 90˚/100 mm 27 mm bore dia

Milling Cutter - Double Angle Unequal Cutter 50 X 12 X 27 mm bore dia55˚

Milling Cutter - Double Angle Unequal Cutter 50 X 12 X 27 mm bore dia 60

Milling Cutter - Double Angle Unequal Cutter 63 X 18 X 27 mm bore dia 70

Milling Cutter - Double Angle Unequal Cutter 63 X 18 X 27 mm bore dia 75˚

Milling Cutter - Single Angle Cutter 63 x 18 x 45˚ RH 27 mm bore dia

Milling Cutter - Single Angle Cutter Cutter 63 x 18 x 45˚LH 27 mm bore dia

Milling Cutter - Single Angle Cutter 63 x 18 x 60˚ LH 27 mm bore dia

Milling Cutter - Single Angle Cutter 63 x 18 x 60˚RH 27 mm bore dia

Milling Cutter - Slitting Saw Cutter Ø 75 x 3 X Ø 27 mm

Milling Cutter - Slitting Saw Cutter Ø 100 x 6 X Ø 27 mm

Milling Cutter - Shell End Mill Ø 50 x 36 x 27 mm, Preferably Inserted Tip Type

Milling Cutter - Shell End Mill Ø 75 mm x 50 x 27 mm, Preferably Inserted Tip Type

Ø 6, Ø 10 and Ø 16 are (double fluted), Ø 20 mm & Ø 25mm (four fluted)Milling Cutter - Parallel Shank end mills

Ø 17.5 x 8 mm Width x Diameter of shank 8 mm Milling Cutter - T Slot Cutter with Parallel Shank

Milling Cutter - Concave Ø 63 x 6 radius x 27 mm Bore Diameter

Ø 63 x 6 radius x 27 mm Bore DiameterMilling Cutter - Convex

Milling Cutter - Disc type form (involutes form - 2 module, 20° pressure angle)

Direct reading vernier caliper 0- 300 (direct reading with dial

Digital vernier caliper 0- 300 mm

Vernier height gauge q 250 mm

Vernier gear tooth caliper

Vernier bevel protractor with 150 m blade

Combination set with 300 mm rule

Bevel gauge 200 mm

Telescopic Gauge 8 mm to 150 mm

Sine Bar 200 mm

Universal Dial Test Indicator Plunger Type - Range 0 - 10 mm, Graduation 0.01 mm complete with Clamping Devices and Magnetic Stand

Centre Gauge com. 60°,

Centre Gauge com. 55°

Centre Gauge com. 29°

Gauge Slip Box Metric - 87 Pieces Set

Gauge Screw Pitch Metric -0.25 to 6 mm

Gauge - Radius Set 1 mm to 25 mm by 0.5 mm

Limit plug gauges 5 mm to 25 mm by 2.5 mm

Ring gauges 5 mm to 25 m by 2.5 mm (GO & NO GO)

Taper gauge M.T. No. 1, 2, 3, 4 & 5

Gauge Feeler / Thickness 0.05 mm to 0.3 mm by 0.05 and 0.4 mm to 1 mm by 0.1 mm - 13 leaves

Safety Glass

Planer gauge standard size

Magnifying glass 75 mm

TRADE-DIESEL MACHANIC

Electrician Screw Driver 250mm

Screw driver Blade 30 cm. x 9 mm.

Blow Lamp 1 litre

Chain Pulley Block capacity with tripod stand3 ton

Chisel flat 10 cm

Chisels cross cut 200 mm x 6mm

Circlip pliers Expanding and contracting 15cm and 20cm

Dividers with Spring 15 cm

Drift Punch Copper 15 Cm

Drill point angle gauge

Drill twist (various sizes) 1.5 mm to 15 mm by 0.5mm

Engineers stethoscope

Files assorted sizes and types including safe edge file (20 Nos)

Gloves for Welding Leather and Asbestos

Glow plug tester

Growler

Hammer Chipping 0.25 Kg

Hammer copper with handle 1 Kg

Hand reamers adjustable 10.5 to 11.25 mm,

Hand reamers adjustable 11.25 to 12.75 mm,

Hand reamers adjustable 12.75 to 14.25 mm

Hand reamers adjustable 14.25 to 15.75 mm

Hand Shear Universal 250mm

Insulated Screw driver 30 cm x 9mm blade

Left cut snips 250mm

Magnifying glass 75mm

Marking out table 90 x 60 x 90 cm.

Oil Stone 15 cm x 5 cm x 2.5 cm

Prick Punch 15 cm

Punch Letter 4mm (Number)

Right cut snips 250mm

Rivet sets snap and Dolly combined 3mm

Rivet sets snap and Dolly combined 4mm

Rivet sets snap and Dolly combined 6mm

Scraper flat 25 cm

Scraper half round 25 cm

Scraper Triangular 25 cm

Scriber 15 cm

Tinnman’s Shear 450 mm x 600mm

Soldering Copper Hatchet type 500gms

Solid Parallels in pairs (Different size) in Metric

Spanner Clyburn 15 cm

Spanner D.E. set of 12 pieces 6mm to 32mm

Spanner T. flocks for screwing up and up- screwing inaccessible

Spanners socket with speed handle, T-bar, ratchet and universal

Spark lighter

Straight edge gauge 4 ft.

Stud extractor set of 3

Taps and Dies complete sets (5 types)

Taps and wrenches - Metric

Telescope gauge

Temperature gauge with sensor 0-100 0C

Trammel 30 cm

V’ Block 75 x 38 mm pair with Clamps

Air conditioned CRDI Vehicle in running condition -LMV

Gas Welding Table 1220mm x760mm

Heavy Commercial vehicle type (without body on frame)

Liquid penetrate Inspection kit

Tin smiths bench folder 600 x 1.6mm

Welding Transformer 150-300 Amps

Arbor press hand operated 2 ton capacity

Automotive exhaust 5 gas analyser (petrol & Diesel) or Diesel Smokemeter

Bench lever shears

Multi Scan Tool with oscilloscope

Pipe Bending Machine (Hydraulic type 12mm to 30mm

Pneumatic rivet gun with standard accessories

Tin smiths bench folder 600 x 1.6mm

Welding plant Oxy-Acetylene complete ( high pressure)

Welding Transformer 150-300 Amps

TRADE- REFRIGERATION AND AIR CONDITIONING TECHNICIAN

Quick couples, process tube adopter¼”

Quick couples, process tube adopter3/8”

Tong Close mouth and pick

Bending spring external type, for copper tube3mm to 16mm DIA

Capillary plug gauge

(Hollo) Punch hole for cutting gasket4.7-16mm die

T-Allen key set size 5/32" to 1/8"

Tap set with matching drills 3 mm to 16mm

Plumbing hammer weight 200 gm

Torque Wrench 300mm-12.7mm

Piercing Valve ¼ Inch

Four way reversible valve

Service Oscillator

C.R.O Single beam 5 MHZ

C.R.O Dual trace/ Double beam 60 MHZ

A.F.O Oscillators

Electronic leak detector

Sling psychrometer mounted on aluminum back, scale -100 C to +1100 C

Oxy-acetylene welding set completecylinders, regulators welding torches with difference nozzles

Single door direct cool refrigerator, carrying with HFC and HC185 L

Frost free refrigerator 200L carrying with HC blend

Three/four door refrigerator ( Inverter type)300L carrying with HC R-600a

Core drill machine

Bench Drilling machine 20 mm capacity,200-2500rpm

Grinding Machine 200mm,3000rpm,Double ended1/2 hp

Evacuating and refrigerant charging station, consist of a) Rotary two stage vacuum pump and motor (with gas ballast and anti-such back) b) manifold with gauges and valves and capable of pulling vacuum up to 50 microns of Hg and with provision of connecting to a microns level vacuum gauge b) Graduated charging cylinder with provision for temperature correction and all necessary isolating valves(CAP. 2 kg. In lieu of (b)above and with accuracyof + / - g for charging hydrocarbons

Evacuating and charging station as above but fitted with weighing scale

Two stage rotary vacuum pump,3or 4 CFM capacity approx. 60 - 10rmp capable of evacuating to 50 microns of Hg and fitted with gas ballast anti-such back valve and single- phase motor

Dry N2 cylinder 2 stage regulator or commercial N2 in cylinder with drier unit and 2 stage regulator & meter cube

Window A.C 1 Ton with R-22 Blend reciprocating compressor

Split A.C 1.5 Ton with R134a or R-22 reciprocating compressor

Duct able split A.C 1.5 ton 1.5 Ton with R134a or R-22 reciprocating compressor

Recovery unit with cylinders CFC, HFC&HCFC

Decibel meter 30-100 db

Cassette Air conditioner 4500 kcal/hr

De scaling pump set with stainless steel impeller and housing complete with motor 1/2 hp and accessories

Fan coil unit with water valves (2 & 3 way)

Shell and tube, DX chillers (small)5 Ton with Cu tubing only

Circulating water pump (small 0.5 H.P with stainless steel tank capacity 20 liters within let/ outlet provision.

Refrigerant Cylinder 10 kg capacity

Gauge manifold with gauges Different size of hoses for R 134a,R22 and R 410.

Shell and tube type condenser 5 Ton

Rotary hermetic compressor 2 Ton

Bottle cooler visible 200 L carrying with HFC-134a& reciprocating compressor

Deep freezer 200 L carrying with HFC-134a& reciprocating compressor

Display Cabinet 2 ton capacity

Water cooler storage type 200 L carrying with HFC-134a& reciprocating compressor

Water dispenser bubble type (Hot and Cold2.5 to 3ltr. Delivery capacity per hour

Ice candy plant 2 ton with capacity to make 32 ice candy at a time with Forma tray, stainless steel tank on trolley

Air-conditioning, direct system Complete with all controls including humidity control

Air-conditioning, indirect system. (water cooled ) Complete with all controls including humidity control

Package A/C 5-ton capacity, Air cooled type with open type compressor reciprocating type

Car A.C components (full kit) a) Wobble plate compressor with mounting brackets. b) Serpentine Evaporator c) Parallel Flow Condenser d) Hoses, tubes, Receiver, Ex.valve. e) Electrical components & wiring Harness

CAR AC tutorial model

Bus AC tutorial model

Automatic ice cube m/c 50 kg/hour

Storage type water cooler (hot and cold)

Visi cooler 185 L

VRF/VRV unit with two indoor units 2.5TR each and 5TR capacity out door unit complete with air cooled condenser, accessories and controls.

Split A/C (inverter technology) 1.5 TR

Walk in cooler PUF insulated for cold room 6X4.5X8 cft. temperature 00-50 c

Absorption system Small size

M/s Sigma Tools Corporation

GASCO ENTERPRISES