1) Shegaon - Proposed extension of High Level platform No 3 (Up side) from 16 coaches to 24 coaches Shegaon railway station.(PID: 01.01.53.25.3.50.036). 2) Provision of Divyangjan Amenities at Achegaon, Bodwad, Varangaon & khamkhed in the jurisdiction of SSE (Wks) MKU, Provision of Divyangjan Amenities at Khumgaon-Burti,Biswabridge, Wadoda and Jalamb Railway station within SSE (W)SEG Jurisdiction and Provision of Divyangjan Amenities at Paras, Srikshetra Nagzhiri, and Gaigaon Railway station within SSE (W) AK Jurisdiction. PID : 01.01.53.25.3.50.029 3) SSE (W) Malkapur Juridiction - Urgent repairs to platform surface, Service building, Water supply arragement , Vally gutters, Rain water arrangement, COP, FOB, Drainage arrangement, Platform compound wall, colouring, painting etc. (Rev 2026-27)

station within SSE (W) AK Jurisdiction.PID : 01.01.53.25.3.50.029

Provision for divyangjan amenities such as standadrd ramps with railing for barrier free

entry,drinking water ,non slippery walkway from parking lot to buildings,signages,toilets etc. at

Paras, Srikshetra Nagzhiri, and Gaigaon Railway station within SSE (W) AK Jurisdiction.(USSOR 2011

S No. Item No Description of Item Unit Qty Rate Amount

1 094063 Providing & fixing Precast Chequered tiles Sqm 255.00 727.67 185555.85

conforming to IS:13801:1993, manufactured

under mechanical vibration & hydraulic

pressing machine in double layer; top layer of

10 to 12 mm thickness of Dolomite Powder,

graded chips, fibre and UV stabilised iron

400mm x 400mm x 35mm thick

2 098090 Laying 80 mm thick oversized stone ballast 75 Sqm 100.00 129.34 12934.00

mm to 100 mm gauge in soling of floors, hand

packed including hand packing, filling voids

with sand and watering, ramming and leveling

3 271020 Filling contractor's murum/good quality cum 14.00 628.79 8803.06

granular material as specified in Railway

Specification without stacking directly in

plinths and floors, etc. complete including

watering and ramming.

BHUSAWAL DIVN-ENGINEERING/CENTRAL RLY

4 274130 "Providing and fixing informatory sign boards Sqm 50.00 3592.08 179604.00

of required shape, size and design made out

of 3 mm thick aluminium sheet bonded with

approved colour retro-reflective sheeting

including all letters, wordings, designs,

graphics, messages etc. made out of

computerized design screen printing on retro-

reflective sheeting. The retro-reflective

sheeting shall be of high intensity grade,

having pressure sensitive/heat activated

adhesive. The rate includes fixing at different

locations with nut bolt, screws etc. but

excludes brackets, stands etc. which shall be

paid separately. "

Schedule 5A-SSE (W) Malkapur Juridiction - Urgent repairs to platform surface, Service building,

Schedule Water supply arragement , Vally gutters, Rain water arrangement, COP, FOB, Drainage

arrangement, Platform compound wall, colouring, painting etc. (Rev 2026-27)

Item- 1 DSR 2023 items

S No. Item No Description of Item Unit Qty Rate Amount

2.0 EARTH WORK

2.1S General

Earth work in excavation by mechanical

means (Hydraulic excavator)/manual means

over areas (exceeding 30 cm in depth, 1.5 m

2.6 in width as well as 10 sqm on plan) including

getting out and disposal of excavated earth

lead upto 50 m and for all lift, as directed by

Engineer-in-charge.

2.31 Clearing jungle including uprooting of rank Sqm 3250 17.6 57200

vegetation, grass, brush wood, trees and

saplings of girth up to 30 cm measured at a

height of 1 m above ground level and removal

of rubbish up to a distance of 50 m outside the

periphery of the area cleared.

4.0 CONCRETE WORK

4.1S CEMENT CONCRETE (CAST IN SITU)

Centering and shuttering including strutting,

propping etc. and removal of form work for :

4.3.2 Retaining walls, return walls, walls (any Sqm 104 842.5 87620

thickness) including attached pilasters,

buttresses, plinth and string courses fillets,

kerbs and steps etc.

Providing and laying cement concrete in

kerbs, steps and the like at or near ground

level excluding the cost of centering,

shuttering and finishing.

III) derived from natural sources : 3 graded

stone aggregate 20 mm nominal size derived

from natural sources)

4.14S MISCELLANEOUS

BHUSAWAL DIVN-ENGINEERING/CENTRAL RLY

Providing and laying in position ready mixed

or site batched design mix cement concrete

for plain cement concrete work; using coarse

aggregate and fine aggregate derived from

natural sources, Portland Pozzolana/Ordinary

Portland /Portland Slag cement, admixtures in

recommended proportions as per IS: 9103 to

4.20 accelerate / retard setting of concrete, to

improve durability and workability without

impairing strength; including pumping of

concrete to site of laying, curing, carriage for

all leads; but excluding the cost of centering,

shuttering and finishing as per direction of the

engineer-in-charge; for the following grades of

4.20.1 All works upto plinth level :

4.20.1.3 Concrete of M20 grade with minimum cement cum 13 9212.6 119763.8

content of 270 kg /cum

5.0 REINFORCEMENT CEMENT CONCRETE

5.9S FORM WORK

Centering and shuttering including strutting,

propping etc. and removal of form for

5.9.1 Foundations, footings, bases of columns, etc. Sqm 42.25 392.15 16568.34

for mass concrete

5.9.2 Walls (any thickness) including attached Sqm 276.25 842.5 232740.63

7 pilasters, buttresses, plinth and string courses

5.22S STEEL REINFORCEMENT

Steel reinforcement for R.C.C. work including

straightening, cutting, bending, placing in

position and binding all complete upto plinth

5.22.6 Thermo-Mechanically Treated bars of grade Kg 13975 107.85 1507203.75

Fe-500D or more.

Steel reinforcement for R.C.C. work including

straightening, cutting, bending, placing in

position and binding all complete above plinth

5.22A.6 Thermo-Mechanically Treated bars of grade Kg 780 107.85 84123

Fe-500D or more.

5.33S DESIGN MIX CONCRETE

Providing and laying in position ready mixed

or site batched design mix cement concrete

for reinforced cement concrete work; using

coarse aggregate and fine aggregate derived

from natural sources, Portland Pozzolana /

Ordinary Portland /Portland Slag cement,

admixtures in recommended proportions as

per IS: 9103 to accelerate / retard setting of

concrete, to improve durability and

w o r k a b i l i t y without impairing strength;

including pumping of concrete to site of

laying, curing, carriage for all leads; but

excluding the cost of centering, shuttering,

finishing and reinforcement as per direction of

the engineer-in-charge, for the following

grades of concrete.:

5.33.1 All works upto plinth level

5.33.1.1 Concrete of M25 grade with minimum cement cum 58.5 9504.75 556027.88

content of 330 kg /cum

5.33.2 All works above plinth level upto floor V level

5.33.2.1 Concrete of M25 grade with minimum cement cum 35.75 9860.4 352509.3

content of 330 kg /cum

BHUSAWAL DIVN-ENGINEERING/CENTRAL RLY

Providing and fixing in position factory made

precast RCC M-40 door and window frames

fixing with hold fast embedded in 1:3:6

concrete block, having excellent smooth finish

as per IS: 6523 with reinforcement of 3 Nos, 6

mm dia main bars tied with 3 mm M.S stirrups

placed @ 200 mm C/C and 6 numbers high

strength polymer blocks of required size for

fixing hinges including providing 6 nos

specially designed M.S. galvanised sleeves for

accommodating 6 mm dia fully threaded bolts

for fixing hold fast on vertical members,

providing suitable arrangement for receiving

sliding door bolts and tower bolt etc. all

complete, as per the direction of Engineer-in-

charge. The frame shall be measured in

running metre correct to two places of

6.0 MASONRY WORK

6.1S General

Brick work with common burnt clay F.P.S. (non

6.1 modular) bricks of class designation 7.5 in

foundation and plinth in:

8.0 CLADDING WORK

8.1S General

Providing and fixing 18 mm thick gang saw

cut, mirror polished, premoulded and

prepolished, machine cut for kitchen

platforms, vanity counters, window sills, facias

and similar locations of required size,

approved shade, colour and texture laid over

20 mm thick base cement mortar 1:4 (1

cement : 4 coarse sand), joints treated with

white cement, mixed with matching pigment,

epoxy touch ups, including rubbing, curing,

moulding and polishing to edges to give high

gloss finish etc. complete at all levels

Granite stone slab colour black, Cherry/Ruby

Providing edge moulding to 18 mm thick

marble stone counters, Vanities etc., including

8.3 machine polishing to edge to give high gloss

finish etc. complete as per design approved

by Engineer-in-Charge.

9.0 WOOD AND P.V.C. WORK

ANODISED ALUMINIUM FITTINGS (ALL

FITTINGS SHALL BE ISI MARKED)

Providing and fixing aluminium sliding door

bolts, ISI marked anodised (anodic coating not

9.96 less than grade AC 10 as per IS : 1868),

transparent or dyed to required colour or

shade, with nuts and screws etc. complete :

Providing and fixing aluminium tower bolts, ISI

marked, anodised (anodic coating not less

9.97 than grade AC 10 as per IS : 1868 )

transparent or dyed to required colour or

shade, with necessary screws etc. complete :

BHUSAWAL DIVN-ENGINEERING/CENTRAL RLY

Providing and fixing aluminium handles, ISI

marked, anodised (anodic coating not less

9.100 than grade AC 10 as per IS : 1868)

transparent or dyed to required colour or

shade, with necessary screws etc. complete :

9.105S GYPSUM BOARD PARTITIONS

9.122 Providing and fixing to existing door frames.

9.122.1 30 mm thick Glass Fibre Reinforced Plastic Sqm 19.5 3720.75 72554.63

(FRP) panelled door shutter of required colour

and approved brand and manufacture, made

with fire - retardant grade unsaturated

polyester resin, moulded to 3 mm thick FRP

20 laminate for forming hollow rails and styles,

with wooden frame and suitable blocks of

seasoned wood inside at required places for

fixing of fittings, cast monolithically with 5

mm thick FRP laminate for panels conforming

to IS: 14856, including fixing to frames.

10.0 STEEL WORK

10.1S General

10.2 Structural steel work riveted, bolted or welded Kg 325 133.7 43452.5

in built up sections, trusses and framed work,

21 including cutting, hoisting, fixing in position

and applying a priming coat of approved steel

primer all complete.

Supplying and fixing rolling shutters of

approved make, made of required size M.S.

laths, interlocked together through their

entire length and jointed together at the end

by end locks, mounted on specially designed

pipe shaft with brackets, side guides and

arrangements for inside and outside locking

with push and pull operation complete,

including the cost of providing and fixing

necessary 27.5 cm long wire springs

manufactured from high tensile steel wire of

adequate strength conforming to IS: 4454 -

part1 and M.S. top cover of required thickness

for rolling shutters.

Steel work in built up tubular (round, square or

rectangular hollow tubes etc.) trusses etc.,

including cutting, hoisting, fixing in position

and applying a priming coat of approved steel

primer, including welding and bolted with

special shaped washers etc. complete.

11.0 FLOORING

11.26S KOTA STONE FLOORING

Kota stone slab flooring over 20 mm

(average) thick base laid over and jointed with

grey cement slurry mixed with pigment to

match the shade of the slab, including rubbing

and polishing complete with base of cement

mortar 1 : 4 (1 cement : 4 coarse sand) :

11.37S CERAMIC GLAZED TILES

BHUSAWAL DIVN-ENGINEERING/CENTRAL RLY

11.37 Providing and laying Ceramic glazed floor tiles Sqm 130 1096.55 142551.5

of size 300x300 mm (thickness to be specified

by the manufacturer) of 1st quality

conforming to IS : 15622 of approved make in

colours such as White, Ivory, Grey, Fume Red

Brown, laid on 20 mm thick cement mortar

1:4 (1 Cement : 4 Coarse sand), Jointing with

grey cement slurry @ 3.3 kg/sqm including

pointing the joints with white cement and

matching pigment etc., complete.

11.41S VITRIFIED FLOOR TILES

Providing and laying vitrified floor tiles in

different sizes (thickness to be specified by

the manufacturer) with water absorption less

than 0.08% and conforming to IS: 15622, of

approved make, in all colours and shades, laid

on 20mm thick cement mortar 1:4 (1 cement :

4 coarse sand), jointing with grey cement

slurry @ 3.3 kg/ sqm including grouting the

joints with white cement and matching

pigments etc., complete.

13.0 FINISHING

13.1S CEMENT PLASTER (IN FINE SAND)

13.1 12 mm cement plaster of mix :

13.44S EXTERIOR FINISHING

13.91 Removing dry or oil bound distemper, water Sqm 27950 25.15 702942.5

proofing cement paint and the like by

28 scrapping, sand papering and preparing the

surface smooth including necessary repairs to

scratches etc. complete.

Painting on G.S. sheet with synthetic enamel

13.92 paint of approved brand and manufacture of

required colour to give an even shade :

Painting with synthetic enamel paint of

13.99 approved brand and manufacture of required

colour to give an even shade :

Painting with aluminium paint of approved

13.100 brand and manufacture to give an even

Re-lettering with black Japan paint of letter

approved brand and manufacture. per cm

Finishing walls with water proofing cement

paint of required shade :

13.109.1 Old work (one or more coats applied @ 2.20 Sqm 19500 112.9 2201550

kg/10 sqm) over priming coat of primer

applied @ 0.80 litrs/10 sqm complete

including cost of Priming coat.

Finishing walls with Acrylic Smooth exterior

paint of required shade :

13.111.1 Old work (Two or more coat applied @ 1.67 Sqm 5200 120.75 627900

ltr/ 10 sqm) on existing cement paint surface

15.0 DISMANTLING AND DEMOLISHING

15.1S General

Demolishing cement concrete manually/ by

mechanical means including disposal of

material within 50 metres lead as per

direction of Engineer - in - charge.

BHUSAWAL DIVN-ENGINEERING/CENTRAL RLY

(including equivalent design mix)

Demolishing brick work manually/ by

mechanical means including stacking of

15.7 serviceable material and disposal of

unserviceable material within 50 metres lead

as per direction of Engineer-in-charge.

Dismantling tile work in floors and roofs laid in

15.23 cement mortar including stacking material

within 50 metres lead.

15.25 Dismantling stone slab flooring laid in cement Sqm 16.25 266.45 4329.81

mortar including stacking of serviceable

material and disposal of unserviceable

material within 50 metres lead.

16.0 ROAD WORK

16.1S ROADS

16.3 Supplying and stacking at site.

16.3.6 Stone screening 13.2 mm nominal size (Type cum 3.25 2034.35 6611.64

16.3.7 Stone screening 11.2 mm nominal size (Type cum 3.25 2247.75 7305.19

16.4 Laying, spreading and compacting stone cum 146.25 1046.95 153116.44

aggregate of specified sizes to WBM

specifications in uniform thickness, hand

picking, rolling with 3 wheeled road/vibratory

roller 8-10 tonne capacity in stages to proper

grade and camber, applying and brooming

requisite type of screening / binding material

to fill up interstices of coarse aggregate,

watering and compacting to the required

16.30S PREMIX CARPET

Providing and applying tack coat using hot

straight run bitumen of grade VG - 10,

including heating the bitumen, spraying the

16.30 bitumen with mechanically operated spray

unit fitted on bitumen boiler, cleaning and

preparing the existing road surface as per

specifications :

16.35 2.5 cm premix carpet surfacing with 3 cum of Sqm 1560 252.15 393354

stone chippings 10 mm nominal size per 100

sqm and bitumen emulsion (medium setting

48 min. 65% bitumen contents) complying with

IS : 8887, using 96 kg per cum of chippings of

road surface, including consolidation with road

roller etc complete .

BHUSAWAL DIVN-ENGINEERING/CENTRAL RLY

Providing and laying Bitumen Penetration

Macadam with hard stone aggregate of

quality, size and grading as specified, with

bitumen of suitable penetration grade,

including required key aggregate as specified,

spreading coarse aggregate with the help of

self propelled/ tipper tail mounted aggregate

spreader and applying bitumen by a pressure

distributor and then spreading key aggregate

with the help of aggregate spreader complete,

including consolidation with road roller of

minimum 8 to 10 tonne capacity to achieve

specified values of compaction and surface

16.36.1 For 50 mm compacted thickness using coarse Sqm 390 505.65 197203.5

aggregate of size 50-20 mm graded @ 0.60

cum per 10 sqm key aggregate of size 12.5

mm graded @ 0.15 cum per 10 sqm. With

paving asphalt grade VG - 10 @ 50 kg/ 10

16.40S SEAL COAT

16.40 Providing and laying seal coat of premixed Sqm 1560 88.55 138138

fine aggregate ( passing 2.36 mm and

retained on 180 micron sieve) with bitumen

using 128 kg of bitumen of grade VG - 10

bitumen per cum of fine aggregate and 0.60

cum of fine aggregate per 100 sqm of road

surface, including rolling and finishing with

road roller all complete.

16.49S MISCELLANEOUS

16.75 Providing and laying C.C. pavement of mix M- cum 149.5 9823.8 1468658.1

25 with ready mixed concrete from batching

plant. The ready mixed concrete shall be laid

and finished with screed board vibrator ,

51 vacuum dewatering process and finally

finished by floating, brooming with wire brush

etc. complete as per specifications and

directions of Engineer-in-charge. (The panel

shuttering work shall be paid for separately).

16.90 Providing and laying tactile tile (for vision Sqm 243.75 2017.6 491790

impaired persons as per standards) of size

300x300x9.8mm having with water

absorption less than 0.5% and conforming to

IS:15622 of approved make in all colours and

shades in for outdoor floors such as footpath,

52 court yard, multi modals location etc., laid on

20mm thick base of cement mortar 1:4 (1

cement : 4 coarse sand) in all shapes &

patterns including grouting the joints with

white cement mixed with matching pigments

etc. complete as per direction of Engineer-in-

17.0 SANITARY INSTALLATIONS

17.1S General

Providing and fixing white vitreous china

water closet squatting pan (Indian type) :

Extra for using coloured W.C. pan instead of

white W.C. pan :

17.15 Providing and fixing white vitreous china Each 5 2784.95 13924.75

55 pedestal type (European type/ wash down

type) water closet pan.

17.16 Extra for using coloured pedestal type W.C Each 5 170.7 853.5

pan (European type) with low level cistern of

same colour instead of white vitreous china

W.C pan and cistern.

BHUSAWAL DIVN-ENGINEERING/CENTRAL RLY

Providing and fixing P.V.C. low level flushing

cistern with manually controlled device

(handle lever) conforming to IS : 7231, with all

fittings and fixtures complete.

Providing and fixing white vitreous china wash

17.25 basin including making all connections but

excluding the cost of fittings :

Providing and fixing mirror of superior glass

(of approved quality) and of required shape

17.32 and size with plastic moulded frame of

approved make and shade with 6 mm thick

hard board backing :

18.0 WATER SUPPLY

18.7S C.P.V.C. PIPES

Providing and fixing Chlorinated Polyvinyl

Chloride (CPVC) pipes, having thermal stability

for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes

jointing of pipes & fittings with one step CPVC

solvent cement, trenching, refilling & testing

of joints complete as per direction of Engineer

in Charge. External work

19.0 DRAINAGE

19.1S STONE WARE PIPES AND FITTINGS

Providing and laying non-pressure NP2 class

(light duty) R.C.C. pipes with collars jointed

19.6 with stiff mixture of cement mortar in the

proportion of 1:2 (1 cement : 2 fine sand)

including testing of joints etc. complete :

Schedule 5B-SSE (W) Malkapur Juridiction - Urgent repairs to platform surface, Service building,

Schedule Water supply arragement , Vally gutters, Rain water arrangement, COP, FOB, Drainage

arrangement, Platform compound wall, colouring, painting etc. (Rev 2026-27)

Item- 1 USSOR 2011 Items

S No. Item No Description of Item Unit Qty Rate Amount

2 094063 Providing & fixing Precast Chequered tiles Sqm 650.00 727.67 472985.50

conforming to IS:13801:1993, manufactured

under mechanical vibration & hydraulic

pressing machine in double layer; top layer of

10 to 12 mm thickness of Dolomite Powder,

graded chips, fibre and UV stabilised iron

3 274130 Providing and fixing informatory sign boards Sqm 130.00 3592.08 466970.40