Improvements to road from Hireshellikeri to Ganganabudihala in Bagalkote taluk of Bagalkote Dist

Improvements to road from Hireshellikeri to Ganganabudihala

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

Surface Drains in Soil Construction of unlined surface drains of average cross sectional area 0.40 m2 in soil to specified lines, grades, levels and dimensions. Excavated material to be used in embank...

Compacting original ground supporting embankment- Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of...

Construction of Subgrade and Earthen Shoulders-Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading,...

GSB By Mix in Place Method-Granular Sub-base with well graded material (table 400.1) Grading-IlI By Mix-in place method. Granular Sub-base with well graded material (table 400.1a) By Mix-in place meth...

WBM Grading I (63mm to 45 mm)-Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing...

WBM Grading II (53mm to 22.4mm)-Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packi...

Prime Coat over WMM/WBM-Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0....

Tack coat on Granular surface treated with primer-Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on the prepared bituminous...

Mix Seal Surfacing-Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using VG-3...

Kilometre Stone-Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc Ordinary Kilometer Stone(precast)

Kilometre Stone-Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc 200m stone(precast)

Studs-Providing and Fixing Aluminium studs 100x100 mm fitted with lense reflectors

Road Marking-Road Marking with Hot Applied Thermoplastic Compound with eflectorising glass Beads on Bituminous Surface. Providing and laying of hot applied thermoplastic compound 2.5 mm thick includin...

Providing and Fixing 'Logo Board ' of PMGSY at Starting Point-Providing and fixing of typical Logo board as per specifications and drawing. Two ACP Sheet of 3mm thick, top and Bottom plate duly welded...