Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.8 LAccepted-AOC 0 GHULAM MOHAMMAD AND CO 0 GURUDAWARA II RAWALPORA SRINAGAR JAMMU AND KASHMIR RAWALPORA SRINAGAR JAMMU KASHMIR 190001 | SRINAGAR | JAMMU AND KASHMIR | 190001 | L1 | Accepted-AOC L1 | |
| 2 | L2₹29.8 L+₹3.0 L (11.3%)Rejected-Finance | L2 | Rejected-Finance Being other than Lowest Tenderer | |
| 3 | L3₹30.7 L+₹3.9 L (14.4%)Rejected-Finance | L3 | Rejected-Finance Being other than Lowest Tenderer | |
| 4 | L4₹31.7 L+₹4.9 L (18.2%)Rejected-Finance 25 KASHIPUR KASHIPUR BALLIA UTTAR PRADESH 277001 | BALLIA | UTTAR PRADESH | 277001 | L4 | Rejected-Finance Being other than Lowest Tenderer | |
| 5 | L5₹34.8 L+₹8.0 L (29.8%)Rejected-Finance | L5 | Rejected-Finance Being other than Lowest Tenderer |
Tender Value
₹43.6 L
EMD Value
₹87,300
Closing Date
6 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) SRINAGAR
GE (AF) SRINAGAR
ADDN/ALTERATION TO CERTAIN OMQs AT AIR FORCE STN SRINAGAR (PHASE-II) UNDER GE (AF) SRINAGAR.
2023_MES_627009_1
GE (AF)/SGR-58/2023-24
Open Tender
Civil Works
Item Rate
180 days
SRINAGAR
As per NIT
9 documents required · 9 mandatory
₹500
GE (AF) Srinagar
₹87,300
Yes
10 Jan 2024
6 Nov 2023
8 Dec 2023
6 Nov 2023
6 Dec 2023
23 Nov 2023
Amount
Schedule 'A' Part-I (Building Works)
Taking down Shutters of any description area exc 1 Sqm and n exc 2 Sqm each etc., complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.50 Sqm each, complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 Sqm but n exc 4.00 Sqm each, complete all as specified and directed.
Taking down & refixing of shutters of any descreption after easing and adjusting also refixing builders hardware as required including renewal of unserviceable screws, etc area of shutters n.exc 1 sqm each in same opening, complete all as specified and directed.
Taking down & refixing of shutters of any descreption after easing and adjusting also refixing builders hardware as required including renewal of unserviceable screws, etc area of shutters exc 1 sqm and n exc 2 sqm each in same opening, complete all as specified and directed.
M&L for Pressed steel frames of size 125 mm x 60 mm, 1.25mm thick for doors with one or more rebates including necessary fixing lugs, lock strike plates complete, providing mild steel 6 mm dia thresh old bar and filling hollow of frame with plain cement concrete Type C-0, 1:3:6 (using 12.5 mm graded crushed stone aggregate), complete all as specified and directed.
M & L in repair for MS works as in holdfast, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging holdfasts, Grills, cladding and similar small articles conforming to Fe 290 Gde E-165, complete all as specified and directed.
M&L for PCC 1:3:6, type-C1 (using 20 mm graded crushed stone aggregate) as for fixing of holdfasts, etc including necessary formwork, complete all as specified and directed.
S&F 35mm thick Factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass/gauze etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); in second class hardwood, complete all as specified and directed.
S&F 35 mm thick Factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, Complete all as specified and directed.
S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube and fixing in opening, complete all as specified and directed.
S&F 30mm thick (Style) Factory made solid panel PVC door shutter consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.
S&F Powder Coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified and directed.
S&F powder coated of any colour (Thickness or powder coating not less than 50 micron) aluminium window and ventilator shutters, side hung type without sash bars / Sliding windows, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150 mm long (1 no.) hinges type B-21 100mm long (2 no.) suitable handle (1 no.), complete all as specified and directed.
S&F powder coated aluminium grill (Thickness or powder coating not less than 50 micron) of approved design / pattern, with approved standard section and fixed to the existing window frame with C.P. brass / stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved powder coated aluminium standard section around the opening,complete all as specified and directed.
S&F in repair 18 /19 mm thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work as in Kitchen drawers, Cupboard shutters etc., complete all as specified and directed.
S&F 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions, complete all as specified and directed.
S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised., width of flaps when open in 30 mm, complete all as specified and directed.
S&F Aluminium alloy, anodised, sliding door bolt 300 mm length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed.
S&F 150 mm long Aluminium anodised, handle of extruded section fabricated type anodised and fixed, complete all as specified and directed.
S&F Aluminium, anodised, barrel tower bolts 150 mm size of extruded section, complete all as specified and directed.
S&F 125 mm long Aluminium anodised, handle of extruded section fabricated type anodised and fixed, complete all as specified and directed.
S&F Aluminium, anodised, barrel tower bolts 125 mm size of extruded section, complete all as specified and directed.
S&F Butt hinges, stainless steel, 100 mm size, complete all as specified and directed.
S&F in repairs 300 mm long mild steel ordinary rat tail rod pattern, door spring including roller and roller plate, complete all as specified and as directed.
S&F 03 mm thick sheet glass, ordinary quality and glazing with oil putty / wooden beads in square not exceeding 0.5 square metre in each pane, complete all as specified and directed.
S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, complete all as specified and directed.
S&F Figured Glass pin head type 4 mm thick n exc 0.5 Sqm and glazing with oil putty, Complete all as specified and directed.
S&F Floor door stopper of aluminium alloy body 140 mm cover plate and tounge, anodised with hard-drawn steel spring fixed in floor, complete all as specified and directed.
S&F 100 mm size hasp and staple, mild steel including bolt to hinge plate and fixed with screws, complete all as specified and directed.
S & F 35-40 mm dia, cupboard knobs fixed with nut, screw and washer of brash, bright finished, complete all as specified and directed.
S&F drawer brass handle, projecting drop (50 mm to 65mm) on screwed plate, complete all as specified and directed.
S&F in repair Stainless Steel drapory rod 25 mm dia, fency type inculding stainless steel finials and stainless steel brackets, Complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.
S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets, & snap grid etc, complete all as specified and directed.
M & L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, fixed in repairs, complete all as specified and directed.
M&L for 12mm thick Gypsum Board (water proof) in ceiling fixed with screw or as per manufacturers instructions including necessary jointing and taping, complete all as specified and directed.
M&L for 6 mm thick Non asbestos fibre cement building fixed or laid / inserted to timber / GI / Aluminium framework with screws to ceiling flat or sloping, fixed in repair, complete all as specified and directed.
Preparation of new or previouly untreated plaster/ AC sheet surfaces of ceiling board including cornices and applying two coats of oil bound distemper over one coat primer and 1 mm thick cement base putty, complete all as specified and directed.
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
S&F Pre- painted (In camouflage pattern) galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed.
S & F Pre-painted (In camouflage pattern) galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F Aluminium window, powder coated (Minimum thickness 50 Micron), having three track with aluminium section 92mm x 31.75mm (Weight of bottom section 1.07 Kg/m, top section 0.933 Kg/m), shutter section 40mm x 18mm (weight of handle section 0.417 Kg/m), interlock 0.547 Kg/m mounted on bearing to slide on tracks plain anodized in approved shade including fixing of 5mm thick sun/heat reflected glass and wire mess, PVC track gasket, EPDM rubber gasket on glass of weather tightening along with locks, handle including sealing gap with marble surfaces with silicon sealants making it water proof in all manner etc., complete all as specified and directed.
Demolition of RCC selves / cooking plateform (reinforement cut as required to facilitate demolition) and similar suspended work and removing debries form site, complete all as specified and directed.
Use & waste form work to soffits & side of selves / cooking plateform flat, fair finished surfaces of concrete not exc 200 mm thick, complete all as specified and directed.
M&L for RCC 1:2:4, type-B1 (using 12.5 mm graded crushed stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.
M&L for mild steel TMT bars 10 mm dia and over cut to length bent to shape including cranking bending spirallay for hooping for columns hooking end and binding with and including mild steel wire (annelead) not less than 0.9mm dia or scuring with clips, complete all as specified and directed.
Preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including rubbish off the premises, complete all as specified and directed.
M&L for 20 mm thick granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 20 mm thick screed bed in CM 1:6, including half moulding of granite edges, complete all as specified and directed.
M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set in neat cement slurry, making uniform 3 mm wide joint using spacer and filling the joint with epoxy grout to match the shade of tiles laid over and including 15 mm thick screed bed in CM 1:6, complete all as specified and directed.
M&L for Glazed vitrified tiles (GVT), 10 mm thick (square) polished, area of each tiles n.exc 0.36 sqm in floors etc set in neat cement slurry, making uniform 5 mm wide joint using spacer and filling the joint with epoxy grout to match the shade of tiles laid over and including 15 mm thick screed bed in CM 1:6, complete all as specified and directed.
All as per Ser item No 1.053 here-in-above but fixing of tiles as in in skirting / dado etc. laid over and including 10 mm thick backing coat/rendering in CM 1:4.
M&L for coloured glazed ceramic tiles of size 600 x 300 x 7-8 mm thick, in vertical surfaces set in neat cement slurry, making uniform 3 mm wide joint using spacer and filling the joint with epoxy grout to match the shade of tiles laid over and including 10 mm thick backing coat/rendering in CM 1:4, complete all as specified and directed.
M&L machine cut kota stone slab 20-25 mm thick as in floor, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over and including 20 mm thick screed bed in CM 1:6, complete all as specified and directed.
M&L machine cut kota stone slab 18 - 20 mm thick as in dado / skirting, risers of steps laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over and including 10 mm thick backing coat/rendering in CM 1:4, complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floor and in paving n exc 15 cm thickness (below or above ground level), complete all as specified and directed.
M&L for 75 mm thick cement concrete 1:3:6, type C-2, (using 40 mm graded crushed stone aggregate), as in Sub base for path / flooring, complete all as specified and directed.
M&L for rubbur molded glossy finish Chequered cement concrete tiles of size 30 cm x 30 cm x 25 mm thick, in white cement with pigment, set, jointed in neat cement slurry & pointed in coloured cement, as in floors / path / hardstanding, laid over and including 15 mm thick screed bed in CM 1:6, complete all as specified and directed.
Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. and removing debries from site, complete all as specified and directed.
M&L for brick work with sub class 'B' Bricks (using old size bricks) straight or curved on plan exc 6m mean radius, built in CM 1:6, complete all as specified and as directed.
All as per Ser item No 1.062 above here-in-before but except bricks.
M&L for Brick work with sub class 'B" (using old size bricks) straight or curved of on plan to any radius in half brick thick walls built in CM 1:4, complete all as specified and directed.
Taking down cement plaster of any description on brick or stone masonary wall, etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.
M&L for 10mm thick Renderingin cement and sand mortar 1:6 on brick work or cement concrete surfaces of walls including finishing the surface even and smooth with using extra cement, complete all as specified and directed.
M&L for 15mm thick Renderingin cement and sand mortar 1:4 on brick work or cement concrete surfaces of walls including finishing the surface even and smooth with using extra cement, complete all as specified and directed.
M&L for 5mm thick Rendering in cement and sand mortar 1:3 on concrete surfaces of ceiling, including finishing the surface even and smooth without using extra cement, complete all as specified and directed.
Preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over one coat of putty, complete all as specified and directed.
Preparation of old decorated surfaces of walls, pillars, cornices by brooming down or steel brushing, scraping down smoke roots. moulds , moss and efflorescence salts, trading oil greasy spots etc. and applying one coat of oil bound distemper after removal of nails & filling nail hole with putty, complete all as specified and directed.
Complete removal of exsting treatment from wall surface including pilister & cornice etc of any descreption including cleaning brooming down or with steel wire brushing, scrapping down smooke soot, moulds, moss and efflorescent salts etc, complete all as specified and directed.
Preperation of new plastered surface of walls and applying two coats of weather proof emulsion paint over and including a coat of wall care putty and & one coat of primer, as ordered in any pattern upto 15 metres height, including roof projection, fascias, sides and soffits of beam, parapets etc, complete all as specified and directed.
Complete removal of exsting treatment from wall surfaces and applying two coats of weather proof emulsion paint over and including a coat of wall care putty and & one coat of primer, as ordered in any pattern upto 15 metres height, including roof projection, fascias, sides and soffits of beam, parapets etc, complete all as specified and directed.
Preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over one coat of chalk whitening, complete all as specified and directed.
Demolition of PCC of any description and in any position other than ground floor exc 15 cm thickness from sunken portions of toilet, complete all as specified and directed.
M&L for plain cement concrete 1:5:10, type E-2 (using 40 mm graded crushed stone aggregate), as in filling in sunken portion of toilet / mass concrete, complete all as specified and directed.
M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base for floor, complete all as specified and directed.
M&L for applying two coats of Shalimar Supercrete/ NITBOND water proofing coating on the entire surface of sunken portion, complete all as specified and directed.
M&L for 15 mm thick rendering in cement mortar 1:3 on sunken portion of toilet including admixed with integral water proofing compound FOSROC's complast X 421 IC @ 130 ml per bag of cement including bonding coat of FOSROC's Nito bond AR cement slurry/ STP No 1 liquid @ 200 ml per bag, complete all as specified and directed.
S & F 40 mm bore mild steel galvanised iron 'medium grade' tubing, cut to size and fixed as spout pipe in sunken floor of toilet, complete all as specified and directed.
M&L for PCC 1:2:4, type-B0 (using 12.5mm graded crushed stone aggregate) as in roof kerb or mud stops, rounded or chamfered on edges, complete all as specified and directed.
Taking up or down 15 mm bore steel tubing and connections, from walls, floors or ceiling etc, complete all as specified and directed.
Taking up or down 20 mm bore steel tubing and connections, from walls, floors or ceiling etc, complete all as specified and directed.
M&L for Refixing of old 15 mm bore steel tubing and connections in new or old position on walls, ceiling or floors etc after cleaning including provn of new fittings, complete all as specified and directed.
M&L for Refixing of old 20 mm bore steel tubing and connections in new or old position on walls, ceiling or floors etc after cleaning including provn of new fittings, complete all as specified and directed.
S&F 15 mm bore tubes, 'medium grade', galvanised, with all fitting; (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors, complete all as specified and directed.
S&F 20 mm bore tubes, 'medium grade', galvanised, with all fitting; (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors, complete all as specified and directed.
M&L for cutting chases pinning in making good to facing where required and pointing in cement mortar (1:3) for concealed water tubing in brick walls cutting n.exc 10 cm girth, complete all as specified and directed.
M&L for Lagging to pipes 20 mm bore used in external water supply or plumbing all around with 50 mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25 gauge 20 mm mesh complete all as specified and directed by Engineer-in-Charge
S&F in repair white vitreous China wash hand basin (Flat back) of size 550 x 400 mm with full pedestal, fixed on and including new brackets complete including, 32 mm size brass chromium plated waste coupling, chain and plug and porcelain stopper, etc, complete all as specified and directed.
S&F in repair PVC connections 15mm size with PTMT nuts of length 600 mm, complete all as specified and as directed.
S&F in repair PVC waste pipe flexible for WHB of 32mm size complete all as specified and directed by Engineer-in-Charge.
Supply and fix in repairs white vitreous china squatting pan ‘ORISSA’ pattern of size 580 mm x 440 mm white with integral foot rests with ‘P’ or ‘S’ trap, front or back inlet including all connection and provision of lime concrete base, complete all as specified and directed.
S&F in repairs white Vitreous china wash down water closet (pedestal pattern) fixed in position with fixing bolt, including all connection, complete all as specified and directed.
S&F in repair PVC low level flushing cistern, duel type, valveless, syphonic action type, double push botton, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 32 mm dia of required length and making connection, complete all as specified and directed.
S&F in repair white Plastic water closet seat cover, closed pattern with flat bottom, and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.
S&F in repair sinks with drainage board made of stainless steel 1mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm including waste assembly, complete all as specified and directed.
S&F in repairs stainless steel sink, 1.00 mm thick for kitchen or laboratory, with plug, washers, waste pipe including bedding in cement mortar on to draft wall or including fixing cantilever brackets, connecting union to pipe etc, overall size 495 mm x 420 mm, with bowl size 405 mm x 355 mm x 178 mm, including waste assembly, complete all as specified and directed.
S&F in repairs for 15 mm size bib taps, long body, fancy type, cast copper alloy chromium plated, with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.
S&F in repairs for 15 mm size two way bib taps fancy type, cast copper alloy chromium plated, with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.
S&F in repairs for 15 mm size angle cock fancy type, cast copper alloy chromium plated, with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.
S&F in repairs for 15 mm size two way angle cock fancy type, cast copper alloy chromium plated, with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.
S&F in repairs brass chromium plated shower roses with swivel joints, 125 mm size in square with long shank arm including fixing to steel pipe or union, complete all as specified and directed.
S & F in repairs 15 mm size sink mixer for mixing hot & cold water, cast copper alloy chromium plated with capstan heads, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.
S & F in repairs 15 mm size central hole basin mixer for mixing hot & cold water, cast copper alloy chromium plated with capstan heads, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe including 450 mm long braided connection pipe, complete all as specified and directed.
S & F in repairs 15 mm size wall mixer for mixing hot & cold water, cast copper alloy chromium plated with capstan heads, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.
S&F in repairs brass chromium plated Jet Spray of Standard size for EWC alongwith CP connection and all fittings as fixed, complete all as specified and directed.
S&F in repairs chromium palted Health faucet (ABS body) fixed with spring action and lever along with PVC flaxible pipe 1.2 m wit ABS wall hook for supply of water fitted in the existing water connection in the toilets, complete all as specified and directed.
S&F in repairs brass chromium plated towel ring of minimum dia 200 mm, complete all as specified and directed.
S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long , complete all as specified and directed.
S&F in repairs Corner Glass Shelf of size 300x300 mm with stainless steel wire guard fixed on wall with and including bracket and brass screws and wooden / plastic cleats, complete all as specified and directed.
S&F in repairs Tubular towel rail stainless steel chromium plated 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete all as specified and directed.
S&F in repairs 100 mm dia stainles steel chromium plated grating, fixed in position with white cement, complete all as specified and directed.
S&F in reapirs Toilet paper holder cast copper alloy chromium plated fixed to walls with chromium plated brass screws, complete all as specified and directed.
S&F in repairs stainless steel chromium plated Soap dish, fixed to wall with plugs with cadmium plated brass screws, complete all as specified and directed.
S&F in repairs 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls, with PVC clamp, complete all as specified and directed.
S&F in repairs 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls, with PVC clamp, complete all as specified and directed.
S&F in repairs 75 mm dia PVC floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified and directed.
S&F 75 mm size PVC (SWR) bends of any radius, with access door, complete all as specified and directed.
S&F 110 mm size PVC (SWR) bends of any radius, with access door, complete all as specified and directed.
S&F in repairs 125/110 mm size PVC (SWR) 'P’ trap, complete all as specified and directed.
S&F in repair Stainless steel plate rack made of 1 mm thick sheet, overall size 600 x 750 mm, with partitions, fixed to wall with PVC gutties and screws of suitable sizes, complete all as specified and directed.
S&F in repairs 500 litres capacity, white colour, double layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball brass valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, complete all as specified and directed.
S&F in repairs 1000 litres capacity, white colour, double layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball brass valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, complete all as specified and directed.
S&F in repairs 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.
Preparation of old painted wood and wooden base surfaces of any description over 10 cm width or girth and painting with one coat of synthetic enamel paint, complete all as specified and directed.
Preparation of old painted steel surfaces of any description exc 10 cm width or girth and painting with one coat of synthetic enamel paint, complete all as specified and directed.
S&F 100 mm size stainless steel handle, fancy type, complete all as specified and directed.
S&F 60 mm size stainless steel hinge, self closing, Italian pattern suitable for wooden cabinet door opening / closing operation, complete all as specified and directed.
S&F 3 mm thick, PVC edge lipping, fixed with nails for 18/19 mm thick pre-laminated partical board & shutters etc, complete all as specified and directed.
S&F Magnetic type catch fixed with screws to door frame, complete all as specified and directed.
S&F stainless steel telescopic channel of size 25 mm x 12 mm, 450 mm lenth (when closed) with male female rolling brackets suitable for baskets, complete all as specified and directed.
S&F Stainless steel, 304 grade, perforated cutlery basket of size 520 mm width, 485 mm depth and 100mm height, complete all as specified and directed.
S&F Stainless steel, 304 grade, Cup & Saucer basket of size 520 mm width, 485 mm depth and 100 mm height, complete all as specified and directed.
S&F Stainless steel, 304 grade, designer Pull out detergent basket of size 100 mm width, 485 mm depth and 430 mm height, complete all as specified and directed.
S&F Stainless steel, 304 grade, designer plate basket of size 520 mm width, 485 mm depth and 150 mm height, complete all as specified and directed.
S&F Stainless steel, 304 grade designer pull out basket of size 810 mm width, 485 mm depth and 200 mm height, complete all as specified and directed.
S&F Stainless steel, 304 grade designer Gas removal mesh of size 200 mm width and 100 mm height, complete all as specified and directed.
M&L for second class hard wood plain fillets, square in section, clean sawn, secured with screws section area exc 13 Sqcm but n.exc 25 Sqcm, complete all as specified and as directed.
Schedule 'A' Part-II (Intermal Electrification Works)
Taking down carefully (copper/aluminum) unsv point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point ,socket point or power point including fixture and fitting such as switches , ceiling roses, pendants , regulators , sockets , light fitting etc. removing material to store for keeping in safe custody or for taking credit( credit for above items should be made as per conditions seperately) and making good the disturbed surfaces of wall/floor or ceiling to match with existing surface and finishing the surfaces as per existing, complete all as specified and directed.
M & L for Point wiring for one switch by one switch on Independent board with 1.5 sqmm PVC insulated and unsheathed fire retardant low smoke and halogen (FR-LSH) copper conductor single core multi stranded copper cable confirming to IS:694 (2010) using approved colour code for phase and neutral as per IS code drawn through non metallic PVC rigid concealed conduit heavy mechanical stress (HMS) grade in accordance with IS:9537 (Part 3) having wall thickness not less than 2.0 mm thick and minimum 20 mm external dia but shall be increased as per actual site requirement in accordance with clause No 19.125 of SI Part I ( ISI marked) including conduit accessories like bends, tees, junction boxes etc with all accessories suitable for modular/conventional type fitment,provision for fixing of modular flush boxes of appropriate size and dimensions for fixing of piano switches/sockets/regulator etc including PVC insulated and unsheathed FRLSH 1.5 sqmm multi stranded copper conductor cable (green color) as continous earth lead wire connected to common earth and earth dolly complete all as specified and directed by Engr-in-Charge. Note: (i) For concealed point wiring cutting chases for conduit shall be measured and paid seperately (ii) For sinking boxes cutting chases for conduit shall be measured and paid seperately
All as per ser item No 2.02 here in above but for one light point controlled by one way switche.
All as per ser item No 2.02 here in above but for One ceiling fan point controlled by one way switch.
All as per ser item No 2.02 here in above but for wall mounted fan/exhaust fan point controlled by one way switch.
All as per ser item No 2.02 here in above but for one light point controlled by two way switcheson independent board.
All as per ser item No 2.02 here in above but for one belll/Buzzer point controlled by one bell push 5Amp on the same board with other switches or independent
All as per ser item No 2.02 here in above but for 05 amp socket outlets point controlled by one switch on Independent board.
All as per ser item No 2.02 here in above but for 05 amp socket outlets point controlled by one switch on same board.
All as per ser item No 2.02 here in above but for 15 amp socket outlets point controlled by one switch on Independent socket outlet using 2.5sqmm PVC insulated and unsheathed fire retardant low smoke and halogen (FR-LSH) copper conductor single core multi stranded copper cable confirming to IS:694(2010) using approved colour code for phase and neutral as per IS code drawn through non metallic PVC rigid surface conduit heavy mechanical stress (HMS) grade in accordance with IS:9537 (Part 3) having wall thickness not less than 2.0 mm thick and minimum 20 mm external dia but shall be increased as per actual site requirement in accordance with clause No 19.125 of SI Part I ( ISI marked) including conduit accessories like bends, tees, junction boxes etc fixed concealed with all accessories suitable for modular type fitment,provision for fixing of modular flush boxes of appropriate size and dimensions for fixing of piano switches/sockets/regulator etc including PVC insulated and unsheathed FRLSH 2.5 sqmm multi stranded copper conductor cable (green color) as continous earth lead wire connected to common earth and earth dolly, complete all as specified and directed.
M & L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth, complete all as specified and directed.
All as per item no 2.11 here in above but for exc 10 cm but not exc 20 cm girth.
S&F module cover plate with frame as per site requirement for following module, complete all as specified and directed
(a) 1 Module
(b) 3 Module
(c) 4 Module
(d) 6 Module
(e) 8 Module
S&F Modular metal Flush box as per site requirement, complete all as specified and directed
(a) 1/2 Module
(b) 3 Module
(c) 4 Module
(d) 5 Module
(d) 6 Module
(e) 8 Module
S&F modular switch 1 way 6 Amp,230 volts ,1 Module complete all as specified and directed
S&F modular switch 2 way 6 Amp,230 volts ,1 Module, complete all as specified and directed
S&F Modular Switch 1 way 16/20 Amp,230 volts, 1 Module, complete all as specified and directed
S&F modular socket 6A,230 volts, 2/3 Pin universal 2 Module, complete all as specified and directed
S&F Modular socket 16A,230 volts, 2/3 Pin universal 2 Module, complete all as specified and directed
S&F Modular fan step regulator 100 watt 2 module, complete all as specified and directed
S&F Modular Bell push 6A, 230 volts, 1 way, 1 Module , complete all as specified and as directed.
S&F Ceiling rose, surface bakelite 65 x 50 mm, 3 terminals fixed on PVC Round Block, complete all as specified and directed
S&F bell electric AC,230V, single phase ,ding dong type, complete all as specified and directed
S&F Lamp holder, white Polycarbonate body, with back plate suitable for batten fittings fixed in position & connecting, complete all as specified and directed.
S&F LED lamp 5 watt cap ,450 lumen, complete all as specified and directed
S&F energy efficient LED integrated batten type luminaires suitable for wall or ceiling mounting with built in LED Chip & integral LED driver 20 watt, Aluminium channel housing & Polycarbonate diffuser of length 1200 mm (approx.),Color temperature 6500 K or as directed,Luminaire efficacy not less 100 lm/W with all accessories, fixing arrangement internally pre-wired, making all connection using 1.5 sqmm copper conductor multistarnd PVC insulated cable from ceiling rose to fitting drawn through PVC flexible conduit complete fixed in position & connecting, complete all as specified and directed.
S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt, 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete making all connection using 1.5 sqmm copper conductor multistarnd PVC insulated cable from ceiling rose to fitting drawn through PVC flexible conduit, complete all as specified and directed.
S&F LED Bulk Head type with high out put , 10 watt ,220 V AC,Color temperature 6500 K or as directed,Lumens 1000 lm with all accessories ,IP 65 protection dust and water resistant ,surge protection up to 2.5kV, PC opal high efficiency diffuser, LM 80 tested made die cast aluminium housing with complete assembly, suitable for surface/wall mounted with driver holder including connecting up using 1.5 sqmm copper conductor multistarnd PVC insulated cable of suitable size, complete all as specified and directed.
M &L for Disconnecting all water and electric connections of geysers and taking down carefully installed storage type electric geysers of any capacity of any make/type/size (horizontal/vertical) lowering and place at site , examine the parts including preparing inventory for each geyser separately in presence of Engineer-in-Charge and cleaning and de-scaling of deposited material from inner tank, outer tank and heating elements by HCL or aqua clear pedilite solution,checking electrical connection for thermostat and indicator lamp, repair to minor leaking by soldering/brazing of the inner copper tank if noticed and and painting of geyser of any capacity after scraping, cleaning, knotting and stopping including preparation of surface of geyser and rubbing with emery paper for painting with one coat of duco paint by spray painting of approved make first quality and re write MES No. on the body of geyser with black synthetic enamel paint (letters and figures 2cm high ) &reassembling and re-fixing of geyser in its original location including hoisting, connecting to water & electric connection and testing for proper functioning of geysers including earthing to the entire satisfaction of the Engineer-in-Charge, complete all as specified and directed.
S&F geyser 50 litre Fiber reinforced PVC nylon pipe heavy duty size 450 mm long 15mm bore with brass coupling chromium plated with rubber washers as both ends as per IS, complete all as specified and directed.
M & L taking down carefully ceiling fan any type, sweep and make for overhauling including dismantling of blades frame and opening and examining motor cleaning of dust/dirt of fan cleaning and greasing of ball bearing and bushes with fresh oil and best quality of grease respectively and reassembling of complete fan after re-fixing parts, complete all as specified and as directed.
M & L for Hanging only ceiling fan (M.D. supply) incl replacement of rubber real insulator,split pin,nut,bolt, washer and connecting up including provision of cable 3 core flexible from ceiling rose or connector to fan, complete all as specified and directed.
M & L for Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc and marking MES No. with black paint, complete all as specified and directed.
M & L taking down carefully Exhaust fan 300mm sweep, or overhauling including dismantling of blades frame and opening and examining motor cleaning of dust/dirt of fan cleaning and greasing of ball bearing and bushes with fresh oil and best quality of grease respectively and reassembling of complete fan after re-fixing parts complete all as specified and as directed by Engr-in-charge. complete all as specified and directed.
Fixing only exhaust fan (M.D.supply) and connecting up including provision of cable 3 core flexible from ceiling rose or connector to fan, complete all as specified and directed.
S&F of Exhaust fan 250mm sweep, made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding, including connection with 1.5 sqmm mutistrand copper conductor flexible wire from ceiling rose, including outside louvers with proper hole, and necessary fixing arrangment and making good to disturbed surface, complete all as specified and directed.
S&F of Exhaust fan 400mm sweep, made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding, including connection with 1.5 sqmm mutistrand copper conductor flexible wire from ceiling rose, including outside louvers with proper hole, and necessary fixing arrangment and making good to disturbed surface, complete all as specified and directed.
S&F LED Street Light fitting 35 watt, for opearting voltage between 110V to 320V system efficiency not less than 120 lumen / watt,PF-0.95 minimum, IP66 protection, 5700CCT(K),CRI between 80-85,confirming to LM79 and LM 80 standards or as per IS-16104:2012 and IS-16106:2012,for estimated life span of minimum 50,000 hrs consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with LED street optics LENS for uniform light distribution, weather proof gasket for lamp & driver compartment, Heat resistance toughened UV stabilized glass fitted in cast aluminium housing with SS screws with IP 65/66 protection, complete all as specified and as directed.
S&F bracket made out of GI light grade pipe of size 40 mm dia, 1.5 m long bend to an angle o f120 degree with 02 Nos MS clamp 50 mm x 50 mm and 04 sets of nuts, bolts and washers painting with two coats of synthetic enamel paint over a red oxide primer, complete all as specified and directed.
Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size 200 amps bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification, complete all as specified and directed.
Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 12 way with IP-43 IK-09 protection double door complete with appropriate size 200 amps bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification, complete all as specified and directed.
S&F distribution board (DB), double door type, as per IEC 61439-3 made out of sheet metal enclosure (CRCA sheet) dust and vermin proof MCB DB, TPN 4 way with 200 Amps rated copper busbar, 415 Volts with in built MCCB 125 Amps, 16KA, 2 neutral bar and 2 earth bar IP 54 protection,cable ties for cable management(Fully insulated busbar and shrouded neutral bars),reversible door for IP 43 & IP 54 ,flush mounted to wall, complete all as specified and directed. Note : Rates are inclusive for flush (Concealed ) mounting of DB and MCCB 160Amp TPN is included under respected items.
S&F 240V, 10 KA 'c' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to32 AMP, in the MCB DB Complete with connection testing and commissionin, complete all as specified and directed.
S&F 240V, 10 KA 'c' curve miniature circuit breaker (MCB) of single poles and neutral and current carrying capacity 40-63 AMP, in the MCB DB Complete with connection testing and commissionin, complete all as specified and directed.
S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 63 AMP, in the MCB DB Complete with connection testing and commissioning, complete all as specified and directed.
S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and neutral and current carrying capacity 63 AMP, in the MCB DB Complete with connection testing and commissioning, complete all as specified and directed.
Earthing complete with galvanised steel earth plate electode 600 mm x 600 mm x 6.00 mm thick burried directly in ground (earth pit not less than 2.25 meter deep below normal ground level connected to and including galvanised steel earth lead wire 4 mm dia by means of bolts, nuts, chock, nuts and washers of galvanised iron or steel including PCC Pit in 1:2:4 type B-1 angle iron frame with RCC cover and handle, excavation and earth work in any type of soil medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade GI protection pipe 15mm bore upto main board complete all as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected to main control board as specified and testing completion complete all as specified and directed. Note: (i) The unit rate includes GI pipe up to 7.5m for protection of earth lead. For any additional length the same shall be adjusted through deviation order. (ii) The unit rate includes main earthing lead/strip from earth electrode to test point up to 7.5 meter (iii) In case measured value of earth resistance is recorded more than 1.0 ohms then the earthing shall be re done by the contractor without any extra cost to the department.
M&L for Sub main wiring using PVC insulated and unsheathed fire retardant low smoke and halogen (FR-LSH) copper conductor single core multi stranded copper cable confirming to IS:694 (2010) using approved colour code for phase and neutral as per IS code drawn through non metallic PVC rigid conduit heavy mechanical stress (HMS) grade in accordance with IS:9537 (Part 3) having wall thickness not less than 2.0 mm thick and external dia as under but shall be increased as per actual site requirement in accordance with clause No 19.125 of SI Part I ( ISI marked) including conduit accessories like bends, tees, junction boxes etc with all accessories, complete all as specified and as directed by Engr-in-charge of the following sizes of cables as under:-
(a) Using two single core PVC insulated FRLSH cable 4.0 sqmm copper conductor multi stranded ( Phase and neutral) and 4.0 sqmm copper conductor PVC insulated FRLSH cable as earth wire drawing in and including concealed PVC conduit not less than 2.00 mm thick ,25 mm outer dia (ISI marked) with all accessories Note : 2 (two) runs of 4.0 sqmm copper cable & 1 (one) run of 4.0 sqmm copper cable in and including 25mm PVC conduit shall be measured as one unit.
(b) Using two single core PVC insulated FRLSH cable 6 sqmm copper conductor multi stranded ( Phase and neutral) and 6 sqmm copper conductor PVC insulated FRLSH cable as earth wire drawing in and including concealed PVC conduit not less than 2.00 mm thick ,25 mm outer dia (ISI marked) with all accessories Note : 2 (two) runs of 6 sqmm copper cable & 1 (one) run of 6 sqmm copper cable in and including 25mm PVC conduit shall be measured as one unit.
Schedule 'A' Part-III (External Electrification Works)
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep and getting it out in soft/loose soil including forming bottom surface to required level for laying of cables/pipes/poles, complete all as specified and directed.
Returning filling in including spreading leveling watering and well ramming in layers not exc 25 cm deep as in soil, complete all as specified and directed.
Removing the excavated material n.exc 50 m to a distance and depositing where directed at a level n.exc 1.5 m above the starting point, complete all as specified and directed.
M&L for sand cushioning to underground cable with dry sand locally available 8cm thick before laying of the cable and 15cm thick after laying and strectching the cable below the bricks/PCC cover, punning of sand using suitable T&P as per site condition, complete all as specified and as directed. Note : Punned thickness of sand to be consider for measurement purpose.
Supply and laying un-reinforced pre cast concrete cable cover confirming to IS:5820 with minimum average breaking load capacity 200 kgs for unreinforced covers , class LV Type 1, flat, size 250mm x 150mm x 40mm, complete all as specified and directed.
S & F 40 mm dia GI pipe, light grade, as protection to cable along the pole / across road crossing/through culvert/passing through ceiling/walls with necessary clamps-02 nos(Flat iron 50x6mm) with ,nuts and bolts for fixing on pole, complete all as specified and as directed.
Supply,laying,jointing and testing, fixing to wall using clamps/pole/floor or in air or passing through pipes/ducts/road/path/drain, laid in trenches, 1100 volts grade heavy duty electric cable XLPE insulated,screened ,PVC bedded, galvanised steel wire or wire armoured with electric power cable 1100 volts grade with stranded aluminium conductor of size 3.5 core 50 Sqmm confirming to IS - 7098 Part-1 and its latest amendments including taking out old unsv LT cable of 25 sqmm 4 core, complete all as specified and as directed.
Deduction to be made from BOQ for Schedule 'A' Part-IV (Credit Schedule from dismentling/taking down items) worth Rs 1,01,099.00 during AOC. Note :- Tenderers shall not quote for this Schedule.
M/S FAROOQ AND SONS
M/S A.R.TANTARY
M/S Thakur & Sons
M/S M.R. Construction
HAJI ZAHOOR HUSSAIN GANIE
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .