REPAIR MAINT OF INTERNAL ROADS OF OTM ACCN IN ZONE VI AT CME UNDER GE CME KIRKEE

Amount

Scarifying or picking gravelled macadam or bituminous macadam surfaces in area not exceeding 400 Sqm and exc 50mm and n exc 100mm in depth complete all as specified and as directed.

M & L for 75mm thick (compacted thickness) WBM with coarse aggregates using granite, trap or basalt stone of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread,rolled and consolidated to gradient and camber required using 8 to 10 tonne power roller complete all as specified and as directed.

All as per item No 2 above but except materials. Note: Serviceable material obtained from item No 1 shall be used under this item.

M & L for repairs to pot holes any depth n,exc 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads etc, cutting around edges atleast 25mm in depth, making good by applying tack coat @ 5Kg per 10Sqm of paving bitumen (VG-10), putting in premix bituminous macadam well rammed and sealed with binder 9.8 Kg per 10 Sqm of paving bitumen (VG-30), blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed (including supply of premixed macadam binder and chippings) depth of pot holes exceeding 30mm complete all as specified and as directed.

M & L for preparing unsurfaced WBM surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms, and finally fanning the cleaned surfaces with gunny bag to remove all loose dirt etc complete all as specified and as directed.

M & L for applying evenly a tack coat with bituminous primer (Paving bitumen of grade VG-10 grade bitumen) @ 10 kg per 10 Sqm over water bound macadam complete all as specified and as directed.

M & L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms, and finally fanning the cleaned surfaces with gunny bag to remove all loose dirt etc complete all as specified and as directed.

M & L for premixed bituminous macadam with binder content @ (VG-30) 4% by weight of total mix (Job Mix) laid / rolled with 8 to 12 tonne power roller and compacted to required gradient and camber (consolidated thickness 75 mm or less as per site requirement of site) laid/ rolled and compacted to required gradient and camber complete all as specified and directed.

M & L for applying a tack coat with VG 10 grade bitumen @ 5kg/10sqm for laying semidense asphaltic concrete over existing black top surface all as specified and directed

M & L for bituminous premixed asphaltic semi-dense concrete using paving bitumen (VG-30 grade), 30mm thick (Consolidated thickness) using binder content @ 5.5% by weight of total mix (Job mix), using mechanical paver rolled with 8 to 12 tonne power roller & compacted to required camber and gradient complete complete all as specified and directed. Note :- (i) Contractor shall submit the authenticated weigh batch receipt as per load material in site duly marked vehicle Number

S & F road safety Convex mirror model No OS-790 from OSCAR safety solutions or other equivalent approved make 80 CM dia, including fixing and anchoring complete all as directed by Engineer-in-Charge including taking down old unserviceable one.

S & F stainless steel Delineator with bottom dia 76mm and top dia 50mm SS Pipe fitted with SS round globe on top having high intensity prismatic tape for best visibility including excavation of post holes in hard/dense soil, filling of mass concrete (1:4:8) type D-2, using 20mm graded aggregete as in fdn ( 0.20 x 0.20 x 0.30 M), removal of surplus soil and making good with existing surfaces complete all as directed by Engineer-in-Charge including taking down old unserviceable one. (make : Sun Eye SE 1004 or equivalent)

M & L for preparation of new or previously treated road black top surfaces of road and applying 2.5 mm thick retro-reflective thermoplastic road marking paint @5kg/sqm, mixed with glass beads @250gm/sqm as lines, dashes, arrows, letters etc on roads, pavements and the like exc 10cm width, by mechanical machine ie dispenser machine , white or golden yellow as per IRC pattern including cleaning of road surface free from dust & moisture complete all as specified and as directed. Make of paint : CMS Bombay / Shivalik Prime-Chandigarh / Ritco / Meerut / SN Industries-Delhi) as approved by GE

S & F Cats eye duel directional Glass beads reflector body material ABS plastic size 117mm x 117mm x 23mm reflector 19 or 21 BI onvex glass element on each side compressive strength upto 35 tonnes , colour body yellow colour with red reflector fixing by means of nail and epoxy fixing to roads by hammering complete all as specified and directed including taking down old unserviceable one. Make : 3M/ Dark eye/Automat or equivalent as approved by GE.

S & F ABS speed breaker of size 350x250x50mm including fixing with epoxy compound and anchoring with nails complete all as directed by Engineer-in-Charge including taking down old unserviceable one. Make : Alcolite or equivalent as approved by GE.

S & F in repair sign board of size 6'x4' made out of ACP sheet 3mm thick and fixed using SS 304 series hollow tubular section of 40mm bore all around. The board shall be pasted with the high intensity prismatic Retro Reflective tape on back ground in required colour writing as required (upto 60 letters on each side of board) of required shape and size as approved by GE. The sign board shall be supported on 02 Nos of post of 65mm bore SS pipe 304 series 4m long duly welded or fixed on SS nut bolts of required size as approved by GE. SS pipe fixed in the ground with 02 Nos of 50x50x6mm size 60cm long MS angle iron welded to the bottom of SS pole for anchorage including necessary excavation, returning filling and fixing with cement concrete (1:2:4) type B1 complete all as specified and directed.

S & F in repair sign board of size 4'x3' made out of ACP sheet 3mm thick and fixed using SS 304 series hollow tubular section of 40mm bore all around. The board shall be pasted with the high intensity prismatic Retro Reflective tape on back ground in required colour writing as required (upto 60 letters on each side of board) of required shape and size as approved by GE. The sign board shall be supported on 02 Nos of post of 65mm bore SS pipe 304 series 4m long duly welded or fixed on SS nut bolts of required size as approved by GE. SS pipe fixed in the ground with 02 Nos of 50x50x6mm size 60cm long MS angle iron welded to the bottom of SS pole for anchorage including necessary excavation, returning filling and fixing with cement concrete (1:2:4) type B1 complete all as specified and directed.

S & F solar stud made out of casting, with 3 LEDs on each side, fixed with epoxy compound including cleaning of existing surface complete all as directed by Engineer-in-Charge including taking down old unserviceable one.

Sunshine Ventures

MOHANLAL MATHRANI CONS. PVT. LTD.

R K Enterprises

SUBHADRA ENGINEERING AND FABRICATOR

Radhika Construction