REPAIRS TO AREA DRAIN, PATH, HARD STANDING, INTERLOCKING TILES AND OTHER MISC WORKS AT DGQA RESIDENTIAL COMPLEX AT GHATKOPAR AND VIKHROLI UNDER GE (NORTH) MUMBAI

Amount

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in deep for foundation, laying pipes etc or for shaft, walls, manholes, pier holes etc, not exceeding 10 sqm on plan and not exceeding 1.5m in depth and getting out in hard/ dense soil complete all as specified and as directed by Engineer-in-Charge

Removing excavated material any type of soil to a distance exceeding 1.5 Km but not exceeding 5 Km and depositing where directed by Engineer-in-charge complete all as specified and as directed by Engineer-in-Charge.

Material and labour for hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed by Engineer-in-Charge.

Demolition of brick work/stone masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, PCC coping etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge.

Material and labour for brick work with sub class 'B' bricks, straight or curved on plan, exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

Material and labour for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius, in half brick thick walls with old size bricks, built in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) removal of rubbish to outside MD land etc complete all as specified and as per directed all as specified and as directed by Engineer-in-Charge.

Material and labour for Plain Cement Concrete (1:2:4) type B-2, using 40 mm graded stone aggregate as in surface channels and drain and finishing the surface even and fair without using extra cement all as specified and as per directed all as specified and as directed by Engineer-in-Charge.

Material and labour for 100mm thick plain cement concrete, 1:2:4, type B-1, using 20mm graded stone aggregate as in floor, finishing the surface with even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 50 mm thick cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base of flooring/ hard standing, path and finishing the surface even and fair without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour for sand cushioning, 40mm thick including watering and consolidation complete all as specified and as directed by Engineer-in-Charge.

Material and labour for machine pressed precast concrete interlocking paver block, of any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment complete all as specified and as directed by Engineer-in-Charge. Make: Mehtab Tiles/Indore/M/S Ultra Tiles/NITCO/Topaz Tiles/Navya Tiles Jodhpur

Material and labour for chequered cement concrete tiles 25 Cm x 25 Cm x 25mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry in floor including screed bed or bedding layer of mortar 20mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed by Engineer-in-Charge. Make- (a) M/S Mehatab Tiles, Indore (b) National Tiles(c) Bharat Tiles and Engg Coy, Bangalore (d) Modern Tiles and Marbles Bangalore (e) M/s NITCO, Mumbai (f) Ultra (g) Duracrete

Material and labour for heavy duty coloured chequered tiles of size 300x300x25mm thick (+/-) in approved design, colour manufactured by rubber mould techhnology, conforming to IS 13801 for wear/abrasion, resitance, water absorption, wet tranverse strenght, fitness, perpendicularity and straigtness and ASTM:303, tiles shall be manufactured in two layers, top layer (minimum 6mm thick), should be silica sand, graded marbel stone aggregate with white cement "Bayer" pigments conforming to relevent IS code and bottom layer could be in grey cement, laid over and including cement including cement screed bed 20 mm thick in CM 1:6, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the complete all as specified and as directed by Engineer-in-Charge. Make- Ultra tiles Pvt Ltd, Duracrete Tiles or Eurocon Tiles

Taking down cement plaster of any description on brick or stone walls or in concrete surfaces as in drain etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land complete all as specified and as directed by Engineer-in-Charge

Material and labour for rendering 15mm thick plaster in cement mortar (1:4) on brick or concrete external surfaces and finishing the surfaces even and smooth without using extra cement etc,but including and using waterproofing compound @ 3% by weight of cement or as per manufacturer's instructions, upto the height of bldg roof including necessary formwork/ scaffolding /ladders and safety belt etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of newly plastered wall surfaces and applying three coats of white wash complete all as specified and directed by Engineer in Charge.

Demolition of reinforced cement concrete of any description, in any position, not otherwise specifically provided, for wall (reinforcement cut as required to facilitate demolition) and removing concrete debris and depositing outside MD land all as specified and as directed by Engineer-in-Charge.

Material and labour fo mild steel TMT bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

Material and labour fo mild steel TMT bars, 6 to 8mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

Material and labour for providing precast reinforced cement concrete, 1:2:4, type B-1 (using 20 mm graded stone aggregate) for manhole / drain covers etc., set in cement mortar 1:4 and finishing the exposed faces even and smooth without using extra cement including necessary form work for fair finished surfaces complete all as specified and as directed by Engineer-in-Charge. Note : Reinforcement shall be measured and paid separately.

Systematically cleaning mud / sludge from the drain of any size and depth including all precautionary and safety measures as required and removing the debris out side MD land complete all as specified and as directed by Engr-in-Charge.

Note: Deduct Credit for demolished / dismantled material of Rs. (-) 21,000.00 (Minus) as listed in Schedule of Credit. Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum'

MAHESH ENTERPRISES (BID ID -3106663)

Vishal Builders (BID ID -3116126)

Accura Associates (BID ID -3125011)

M/S Kumar Enterprises (BID ID -3124648)

RAJU ENTERPRISES (BID ID -3113927)

LUCKY DECOR (BID ID -3113771)