Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹69.5 L
EMD Value
₹69,542
Closing Date
14 Jul 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Package No. SAM-007-PM-ABHIM Construction of Block Public Health Unit (BPHU) at Kuntara, Sambalpur under National Health Mission in the Sambalpur district of Odisha
NBCC/ODISHA/ZO/NHM/NIT/23-24/56
NBCC/ODISHA/ZO/NHM/NIT/23-24/56
Open Tender-Domestic
Civil Works General
Sambalpur, Odisha
₹11,800
₹69,542
14 Jul 2023
30 Jun 2023
14 Jul 2023
14 Jul 2023
21 Jul 2023
Head Description of Item Unit Qnty. Rate Amount
Earthwork in excavation in hard soil for site
leveling, foundation, pits, trenches and other
civil works upto and including 1.5metre lift
and stacking the soil upto a lead of 100 metre
2 1 and including dewatering, removing slush, Cum 132.35 235.53 31,172.13
shoring and strutting (as required), complete
as per specification and as directed by the
Engineer-In-Charge.
Filling in foundation trenches and plinth, with
excavated earth including laying the earth in
layers not exceeding 23.5 cm thick ramming
3 2 & watering with all leads & lifts including cost Cum 88.67 130.86 11,603.53
of all labour,T&P completed as directed by
the Engineer-in-charge.
Supplying and filling sand in foundation and
over areas including watering, ramming,
consolidating and dressing, labours, tools,
taxes etc. all complete as per the
specification and direction of Engineer-In-
Diluting and injecting chemical emulsion for
PRE CONSTRUCTIONAL Anti-termite
treatment and creating a continuous chemical
barrier under and all-round the column pits,
wall trenches, basement excavation, top
perimeter of building, expansion joints, over
5 4 the top surface of consolidated earth on Sqm 89.96 162.84 14,649.09
which apron is to be laid, surroundings of
pipes and conduits etc. complete as per
specifications (plinth area of the building at
ground floor only shall be measured for
Providing and laying plain cement concrete
1:4:8 (1 cement : 4 sand : 8 stone agregate
40mm nominal size) as levelling course in
floor and plinth including tempering, curring,
shuttering etc. complete all depth and height.
Providing and laying plain cement concrete
1:2:4 (1 cement: 2 sand: 4 stone aggregate
12mm nominal size) as levelling course in
7 6 foundation and plinth etc. including Cum 6.85 7267.86 49,784.81
tempering, curring, shuttering etc.complete all
depth and height.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
First class Fly ash Brick masonry using
bricks of size 25 cm. x 12 cm. x 8 cm. having
crushing strength not less than 75 kg. Per.
Sqr. Cm. in cement mortar of mix( 1:6) with
ordinary Portland slag cement(PSC) and
screened & washed sand for mortar after
immersing the bricks for 6 (Six) hours in
water before use in Foundation & Plinth
including splays cutting, circular moulding,
corbelling, chamfering and similar such type
of works, watering and curing etc. including
cost, conveyance, loading, unloading,
royalties and taxes of all materials, cost of all
labour, scaffolding, sundries, T&P required
for the works etc. complete in all respect as
directed by the Engineer-in-Charge.
Fly Ash. brick masonry of size 25 cm. x 12
cm. x 8 cm. having crushing strength not less
than 75 kg. Per Sqr. Cm. in cement mortar of
mix (1:6) with approved grade cement and
screened & washed sand for mortar after
immersing the bricks for 6 (Six) hours in
water before use in Superstructure including
splays cutting, circular moulding, corbelling,
9 8 chamfering and similar such type of works, 0 0.00 0.00 0.00
watering and curing etc. including cost,
conveyance, loading, unloading, royalties and
taxes of all materials, cost of all labour,
scaffolding, sundries, T&P required for the
works etc. complete in all respect as directed
by the Engineer-in-charge
Half brick work with Fly Ash brick masonry in
cement mortar (1:4) in super structure having
a crushing strength of not less than 75
kg./sqcm with dimensional tolerance ± 2%
including splays cutting circular moulding
chamfering and corbelling and similar such
type of works with all necessary projections
watering and curing after immersing the
bricks in water at least for six hours before
use including cost, conveyance, royalties and
taxes of all materials with all labour,labour
cess and T & P required for the work
complete in all respect as per direction of
Engineer-in-Charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Providing, lifting, hoisting and laying
Reinforced cement concrete of M-25 grade
as per approved designs and drawings
having a minimum compressive strength (in
work test) 250 Kg. / Square cm. in 15 cm.
cubes at 28 days after mixing and test
conducted in accordance with I.S. 516 using
12 mm. to 20 mm. size black hard crushed
broken granite stone chips and screened and
washed sharp sand for mortar of approved
quality from approved quarry, washed and
cleaned ( 20mm. size chips not to exceeds 25
% ) to be mixed in concrete mixture with
Portland slag cement (PSC) including
hoisting, lowering, laying and compaction
concrete by using vibrators, watering and
curing for 28 days, centering and shuttering
then after dismantling and removing debris
from the work site and finishing the exposed
surface smooth providing grooves or beads
wherever necessary including cost,
conveyance, loading, unloading, royalties and
taxes of all materials and cost of all labours,
sundries, T & P required of the work etc.
complete in all respect as directed by the
Engineer-in-Charge. But excluding cost and
conveyance of M.S. rods or Tor steel and
binding wires and labour charges for
straightening, cutting, bending etc. of M.S.
rods or tor steel tying the grills and placing in
proper position.
19 18 b) Column up to plinth Cum 3.17 13496.72 42,784.61
21 20 d) Column above plinth Cum 6.75 13496.72 91,102.87
28 27 Column up to Roof Beam Lvl. :- Cum 6.75 15052.67 1,01,605.52
35 34 Column up to Roof Beam Lvl. :- Cum 3.12 16914.71 52,773.90
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Cutting, straightening coiled or bent up M.S.
Rod or tor steel of SAIL/ TATA / RINL
(VIZAG) make including bending, binding,
welding and joining if necessary and tying the
grills and placing in position as required for
R.C.C. Work and for providing fan hooks as
required, hoisting, lowering, laying including
cost, conveyances, taxes of M.S. Rod or tor
steel and binding wires of 18 to 20 gauge and
labour required for the work for bending,
binding and tying the grills in all floors (Linear
measurement will be taken and quantity will
be calculated basing on the standard weight
of B.I.S. for M.S. Rods or tor steel only.
Wastage if any, including weight of binding
wire will not be considered for measurement)
etc. complete as per specification & direction
of Engineer-in-charge.
12mm cement plaster to out side of brick
surfaces with cement mortar of mix 1:6 (1
43 42 cement : 6 fine sand) including necessary 0 0.00 0.00 0.00
scaffolding, curing etc. all complete at all
floors and all heights.
16mm cement plaster to inside of brick
surfaces with cement mortar of mix 1:6 (1
47 46 cement : 6 fine sand) including necessary 0 0.00 0.00 0.00
scaffolding, curing etc. all complete at all
floors and all heights.
6 mm cement plaster on RCC surfaces at
ceiling/slab soffit and other locations with
cement mortar of mix 1:4 (1 cement : 4
coarse sand) including necessary scaffolding,
curing etc. all complete at all floors and all
Supplying, fitting & fixing of Granite Tiles of
minimum Above 0.40 sqm. (20mm thick) of
approved make in floors laid on 20 mm thick
cement mortar (1:4) (1 cement : 4
55 54 course sand) and filling joints with slurry 0 0.00 0.00 0.00
including cost of all materials, labour T&P etc.
required for the work all complete incl.
rubbing as per direction of the Engineer-in-
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying, fitting & fixing of Granite Tiles of
minimum Above 0.10 Sqm & up to 0.4 sqm
(10mm. thick) of approved make in dadoes
laid on 12 mm thick cement mortar (1:3)
(1 cement : 3 course sand) and filling joints
with slurry including cost of all materials,
labour T&P etc. required for the work all
complete incl. rubbing as per direction of the
Engineer-in-charge.
Supplying, fitting & fixing of 8-10 mm thick &
size of 600x600 mm Glaze vertified floor
tiles of matt finish with veilcraft (VC ) shield(
Scratch free/stain free) with water absorption
limit between 0.08% to 3% and conforming
to IS : 15622:2006 (Group B Ib). laid on 20
mm thick cement mortar (1:4) (1 cement : 4
course sand) and filling joints with white
61 60 cement of approved quality including cost of 0 0.00 0.00 0.00
all materials, labour T&P etc. required for the
work all complete as per direction of the
Engineer-in-charge.
Supplying, fitting & fixing of 8-10 mm thick &
size of 600x600 mm Glaze vertified floor
tiles of matt finish with veilcraft (VC ) shield(
Scratch free/stain free) with water absorption
limit between 0.08% to 3% and conforming
to IS : 15622:2006 (Group B Ib). laid on 12
mm thick cement mortar (1:3) (1 cement : 3
course sand) jointed with slurry mixed with
64 63 pigment to match the shades of the tiles etc. 0 0.00 0.00 0.00
complete including cost of all materials,
labour T&P etc. required for the work all
complete as per direction of the Engineer-in-
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying, fitting and fixing of Antiskid
Ceramic Floor Tiles in flooring in toilets
using Digital matching anti-skid ceramic floor
tile (having minimum thickness 7 mm to 8
mm & size 300 mm x 300 mm ) confirming
to I.S 13755 of approved quility and shade on
20mm thick ded of cement morter of mix (1:4)
laid in proper slope and gradient with
screened & washed sharp river sand for
mortar and grouted with neat white cement
slurry, joining the anti-skid ceramic floor tiles
with neat white cement slurry, mixed with
required (tiles are to be immersed in the
water for required time before use) quantities
of pigments of approved marks to match the
67 66 shades of the anti-skid ceramic floor tiles if 0 0.00 0.00 0.00
required including cost, conveyance, loading,
unloading, stacking, royalties of all material,
cost of all labour , sundries, T&P required for
the work , watering,complete in all respect as
per specification excluding GST aas per
specification as directed by Engineer-in-
Supplying, fitting & fixing of 300mm x 200mm
Germ free Glaze Ceramic wall tiles having
thickness 6.5mm to 7.0 mm confirming to IS
13753 in dadoes, skirting and risers of steps
laid on 12 mm thick cement mortar (1:3) (1
cement : 3 course sand) jointed with slurry
mixed with pigment to match the shades of
70 69 the tiles etc. complete including cost of all 0 0.00 0.00 0.00
materials, labour T&P etc. required for the
work all complete as per direction of the
Engineer-in-charge
Supplying, fitting & fixing of Chequered tiles
in floors of approved make laid on 20 mm
thick cement mortar (1:4) (1 cement : 4
course sand) and filling joints with slurry
73 72 including cost of all materials, labour T&P etc 0 0.00 0.00 0.00
required for the work all complete as per
direction of the Engineer-in-charge
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Providing and fixing seasoned sal wood work
in frames at any locations including doors,
windows,cupboard, clerestory and other
frames fixing in position including cost of
hinges, M.S. flat (30mm x 6mm) hold fasts
lugs or dash fasteners of required dia and
length as per drawing / specification, at all
floors and all heights.
Factory made 30mm/32mm flush door shutter
(Laminates both side of frame) with all labour,
78 77 iron fittings, and wooden hinged cleats etc 0 0.00 0.00 0.00
fitted and fixed complete in all respect
Supplying and fixing of Anodisied 15 microns
/ Powder coated 50-60 microns approved
colour aluminium 50mm Casement series
door cum fixed Unit with suitable aluminium
extrued profiles. the system should design to
accommadate 5mm clear Toughen glass
50% and 50% 4MM ACP. the rate inclusive
of hardwares like antilift,roller, espag lock
cum handle,epdm gaskets, felt along with all
accessories etc complete. the gap between
the wall and window will be filled with silicon
weather sealent in the outer side.Casement
Door Outer frame ( 50*46 mm SERIES) Sash
Beeding 35.5 *25.5 mm) Make - WINPLUS+
/ ALUPURE / ALUK
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Factory made FRP( Altematly called GRP)
door frame of size 75mm x 100mm
fabricated using E - glass chopped strand
mat (CSM) U.V stabilised inopathalic Gel
coat and impregnated with inopathalic resin
The thickness of the GRP skins shall not be
less then 2.0 mm . The door frame consists
of four segments which are provided with
plug in socket arrrangement in-situ-in
mould. The segments are plugged in and are
joined together by means of srew. The GRP
frame shall be provided with wooden
reinforcement on six locations for high srew
holding capacity for fixing metalic hold fast
and shall be consolidated by filling with
medium density foam / plaster of paris with
fibre reinforcement , six number of 260mm x
25mm x 5mm size 'S' shaped M.S flat hold
fast shall be provided with the frame. The
material and process for manufacturing the
finish of door frame shall conform to RV-
TIFAC composites Design centre's standards
and specifications . The finish of door frame
will be plain colour white /Ivory/Beige/Light
grey / Golden brown / Mahogany/ Teak wood
/sand stone Champagne/Pastel blue or any
other colour using high quality pigment
complete in all respect as per specification
and direction of the Engineer in Charge. etc.
Factory made GIRID FRP or called GRP
sandwich composite door shutter of 32mm
thick laminated with two GRP skin with good
grain finish fabricated using UV stabilised
isoppthalic gel coat and one layer of 450 gsm
E-glass chopped strand mat (CSM)
impregnated with ortopathilic resin The
thickness of the skins shall not be less than
1.50mm . Expanded polysryne ( EPS)
structural foam panel of 29 mm tickness and
a density of 20kg/cu.mts shall be used as
core material wooden reinforcements made
of sesasoned sal wood block of cross section
not less than 28mm x 32mm and also
necessary sal wood reinforcements for fitting
the metal fittings such as lower bolts ,aldrops,
handles etc. shall be provided . A structural
adhesive compatible with (EPS)foam shall be
used for bending the core material. the sal
wood reinforcements and the skin The
material and process for manufactuing te
door shutter shall conform to RV -TIFAC
components design centre's standards and
specification and the door shutters tested in
conformation to IS 4020-1998. The Finish of
door shutter will be plain colour as per
specification and direction of the Engineer in
Charge. etc. complete
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing of Anodisied 15 microns
/ Powder coated 60-70 microns approved
colour aluminium 22mm Series Sliding 2
Track sliding window Unit with suitable
aluminium extrued profiles. the system
should design to accommadate 5mm clear
glass. the rate inclusive of hardwares like
antilift,roller, touch lock cum handle,epdm
90 89 gaskets, felt along with all accessories etc 0 0.00 0.00 0.00
complete. the gap between the wall and
window will be filled with silicon weather
sealent in the outer side. Make - WINPLUS+ /
Supplying and Fixing of M.S. Grills,
M.S.Doors, M.S. Gate etc including
cost,conveyance of all materials,priming,and
94 93 labour for fitting fixing etc.complete as per the 0 0.00 0.00 0.00
instruction of Engineer-in-Charge
Priming one coat with wall cement primer
(water bound) to make an even finished
surface in all floors and heights to wall
surface of approved make and shade
including sand papering, applying putty
98 97 wherever necessary & cost of scaffolding, 0 0.00 0.00 0.00
staging charges with cost, conveyance, taxes
of all materials, cost of all labour,labour cess
T&P etc. complete as per the direction of the
Engineer-in-charge.
Painting two coats with approved anti-fungal
weather seal paints (ISI) of approved colour,
shade on wall surface over a coat of wall
primer(ISI) water bound including sand
papering, polishing the surface, cost,
conveyances of all materials and cost of all
labour,labour cess with T&P etc, complete as
per specification & direction of Engineer-in-
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Finishing plastered surfaces of walls with
cement based wall putty (Water based) of
approved make and finishing the surface
smooth and even by sand papering to receive
painting in walls, at all heights with staging
106 105 wherever necessary with cost, conveyance, 0 0.00 0.00 0.00
taxes of all materials, cost of all
labour,labourcess, all T&P etc. required for
the work complete in all respect as per the
direction of the Engineer-in-charge.
Painting two coats with approved plastic
emulsion paint over a coat of wall primer of
make Dulux / Berger / Asian to inside surface
of walls finished with Acrylic Wall putty
(water based) of make (Birla / JK) and
finished smooth & even surface to receive
painting using roller to the final coat including
110 109 cost of scaffolding staging charges with cost, 0 0.00 0.00 0.00
conveyances, taxes of all materials, cost of
labour, T&P required for the work etc.
complete for all floors as per specification &
direction of the Engineer-in-charge.
Note :- Sample of Paint & Primer shall be
approved before procurement and use.
Painting two coats with approved Enamel
114 113 Paint on wood work over a coat of Wood 0 0.00 0.00 0.00
Primer in Ground Floor
Painting two coats with approved Enamel
Paint on Steel work in Ground Floor
120 119 Terrace floor Sqm 4.34 177.59 770.74
2.5 cm thick grading concrete (1:2:2) on roof
slab with 6.7mm & down grades size hard
121 120 granite crusher broken chips on new work in 0 0.00 0.00 0.00
123 0 Sub-Total of Civil Works 0 0.00 0.00 48,49,433.13
124 0 Plumbing Works 0 0.00 0.00 0.00
Providing all materials, labour, T&P for fitting
and fixing white glazed vitreous china water
closet (European pattern) with seat cover
(solid) and Cistern of approved make in all
floor including supply of sutaible bracket,
PVC wall plug and Brass screws etc. all
complete including cost, taxes and
conveyance as per specification all complete
as per direction of Engineer-in-charge.
Make:HINDWARE/PARRYWARE/CERA.
(As per Cat no. WHT-551 of Jaquar)
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supply all materials and labour for fitting and
fixing of following size Half Pedestal wash
hand basin of approved make in all floor of
approved quality including cutting the walls &
floor and making good the damages with
cement concrete etc. including all taxes,
duties, transportation etc. all complete as per
direction of EIC.
JAQUAR/HINDWARE/PARRYWARE)
(As per Cat no. Jaquar make having cat no -
Supplying all materials, labour, T&P and
fixing with labour ,T&P as per specification ,
the following Brass/ CP (Hindware) / G.M.
fittings at appropriate locations to thr pipe
lines at all floors and at all heights, of
approved make confirming to relevent IS
specification . etc complete in all respect.
Health Faucet ABS SS braided hose 1.2 m
with CP hook.
(As per Cat no.ALD-579 of Jaquar)
(Make: Jaquar/Hindware)
Two-way Bibcock with wall Flange.
129 5 (As per Cat no.FLR-5041N of Jaquar) 0 0.00 0.00 0.00
(Make: Jaquar/Hindware)
15mm dia pillar cock .
(As per jaquar Cat No- FLR-5011N)
15mm dia Angle Stop cock with Wall Flange.
(As per Cat no. FLR-5053N of Jaquar)
(Make: Jaquar/Hindware)
15mm dia Concealed Stop cock with Wall
(As per Cat no. F200008 of Hindware)
( Make: Hindware/Jaquar )
Providing and fixing 700x500 mm beveled
edge mirror of superior glass (of approved
quality) complete with 6 mm thick hard board
134 10 ground fixed to wooden cleats with C.P. brass 0 0.00 0.00 0.00
screws and washers complete.
(As per Cat no.-Jaquar of Make-B3510106).
135 11 Rectangular shape 700x500 mm NOS 5.00 1835.49 9,177.45
C.P. Soap Dish holder.
(As per Cat no.ACN-1177N of Jaquar)
32 mm C.P. Bottle Trap 32mm with 250 &
190 mm Long Wall Connection pipe & wall
per Cat no.-ALD-769L250X190 of Jaquar)
(Make: Jaquar/Hindware)
32mm dia C.P.waste coupling 32mm SS (Full
Threaded) (As per Cat
no.ALD-705 of Jaquar)
(Make: Jaquar/Hindware)
Providing and fixing towel ring 178 mm dia
with brackets fixed to wooden cleats with CP
139 15 brass screws with concealed fittings No. 5.00 2047.30 10,236.50
arrangement of approved quality.
(As per Cat no.jaquar AQN-7721)
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Providing and fixing Stainless Steel Single
Bowl Sink with Drain Board Undermount -
Matt Finish (47” L x 19” W x 8” D) (Parryware,
Cat no.-C856799 with C.I. brackets and
stainless steel plug 40 mm, including painting
of fittings and brackets, cutting and making
good the walls wherever required :
Providing 15 mm dia Sink cock of Hindware
having cat no - F110021, including painting of
142 18 fittings and brackets, cutting and making NOS 3.00 2361.18 7,083.54
good the walls wherever required :
Fitting and fixing Water purifier for drinking
purpose water inlet and drain out connections
complete in all respects similar to Aquaguard.
Floor drain 160x160 mm dia stainless steel
Supplying all materials, labour & T&P for
fitting and fixing of following sizes of white
glazed vitreous china flat back half stall urinal
basin confirming to specification of approved
make as per IS-2556 with ISI mark in all floor
along with supply & fixing of necessary
component parts like pair of C.I./M.S. bracket
including connection from water supply pipe
with all taxes, duties, transportation etc. all
complete as per specification & direction of
the Engineer-in-charge.
(Make:HINDWARE/PARRYWARE/CERA)
(As per Cat no.-60017 Hindware )
146 22 Flat back half stall urinal . (male urinal) Set 1.00 14460.78 14,460.78
Providing and fixing Chlorinated Polyvinyl
Chloride (CPVC) pipes IS 15778,SDR-13.50
having thermal stability for hot & cold water
supply, including all CPVC plain & brass
threaded fittings, i/c fixing the pipe with
clamps at 1.00 m spacing. This includes
jointing of pipes & fittings with one step
CPVC solvent cement and the cost of cutting
chases and making good the same including
testing of joints complete as per direction of
Engineer in Charge.
Make:SUPREME/ASHRIVAD/AKG/SENTINI.
148 24 20mm dia CPVC Pipe meter 25.00 343.97 8,599.25
149 25 25mm dia CPVC Pipe meter 10.00 434.95 4,349.48
150 26 32mm dia CPVC Pipe meter 12.00 686.76 8,241.12
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Providing and fixing Chlorinated Polyvinyl
Chloride (CPVC)pipes having thermal
stability for hot & cold water supply including
all CPVC plain & brass threaded fittings This
includes jointing of pipes & fittings with one
step CPVC solvent cement, trenching,
151 27 refilling & testing of joints complete as per 0 0.00 0.00 0.00
direction of Engineer in Charge.
Make:SUPREME/ASHRIVAD/AKG/SENTINI.
152 28 40 mm nominal outer dia Pipes meter 20.00 936.33 18,726.60
Supply, Fixing, jointing, testing and
commissioning of uPVC SWR pipe type B
(SWR) pipes(SCH-80) for Soil - waste &
153 29 Kitchen waste pipe cut to required lengths 0 0.00 0.00 0.00
including all necessary fittings and specials
such as bends, junctions offsets, access
Supplying all materials,labour and T&P for
fitting and fixing of following dia UPVC (SCH-
156 32 80) Rain water pipes and fittings along with 0 0.00 0.00 0.00
fixing to wall complete in all respect.
Providing, laying and jointing PVC SWR soil,
waste and vent pipes under floor /suspended
under ceiling / fixed on the wall face
conforming to IS:15905-2011 , ISO-6594
Includes necessary fittings like (plain or
door)tees, bends, collars, crosses reducers,
Y, etc, of approved make, drip seal joint,
suspended under ceiling / embedded in floor.
Includes making connection with sanitary
fittings,of approved make etc all complete
.(As per Supreme/Kishan etc)
163 39 100mm Single Branch Door Tee Nos. 2.00 338.66 677.32
164 40 75mm Single Branch Door Tee Nos. 2.00 192.34 384.68
165 41 100 mm Single Branch Plain "Y" 45 D Nos. 2.00 357.54 715.08
166 42 75 mm Single Branch Plain "Y" 45 D Nos. 2.00 185.26 370.52
167 43 100mm Single Branch Door 'Y' 45D Nos. 2.00 575.84 1,151.68
172 48 75 mm Pipe Wall Clamp Nos. 10.00 27.14 271.40
173 49 100 mm Pipe Wall Clamp Nos. 8.00 38.35 306.80
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Providing, fixing, jointing and testing PP
mineral filled low noise level Soil & Waste
piping system as per BS EN 1451, SN4-S16,
with minimum density for pipes and fittings
1.4 gm/cm3. Pipes and fittings made from
Polypropylene-M (mineral reinforced) and
available from 50 – 160 mm with push fit SBR
type rubber ring sockets for easy installation.
Pipes should have 3 layer design. Should
have hot water resistance up 95ºC for short
term loading (90ºC for long term loading).
Piping system should have chemical
resistance of pH 2-12. Fittings should have
swept design from 75-160mm and depth
gauge for proper fittings against thermal
expansion and contraction, should have top
marking at every 15° intervals in angular
rotation for better alignment. Piping system
includes all required fittings & accessories
such as coupler, bend, tee, Y, reducer,
access pipe, multi floor traps, Nahni trap with
extension piece etc. for conveying soil, waste
& rainwater purpose in floors, ceiling
suspended, or on walls, with leak proof joints
etc. Setting the pipe in 1:2:4 CC in case of
concealed plumbing, wall chasing, holes,
supporting, clamping, covering back with
chicken mesh & plaster and making the wall
good as per approved shop drawing. Testing
as per tender specifications/EIC.
Providing all materials, labour, T&P for fitting
& fixing of following Bronze Ball Valves
confirming to IS-778 with ISI mark in all floor
& fixing with the pipes after cutting the pipes
to required shape & size including wastage
etc. of following nominal diameter, all
complete including testing the joints with
required water pressure.The cost inclusive of
all taxes,duties,transportation scaffolding etc.
all complete as per specification and direction
of Engineer-in-charge..
Providing all materials labour, T&P for
making grooves in bricks/stone masonary
walls vertically or horizontally up to required
depth and width in all floor for laying of pipes
and fittings up to 50mm dia, testing the joints
with required water pressure and making
good the damages with cement concrete
1:2:4 with 12mm size h.g.c.b.chips and
finished smooth with cement morter (1:4) to
original shape including cost of materials,
curing, conveyance, taxes of all materials etc.
all complete as per specification & direction
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Providing all labour,T&P for cutting holes in
bricks or stone masonry wall for taking pipes
in all floors and making good the damages
with cement concrete 1:2:4 finished smooth
180 56 with CP 1:4 to original shape including cost 0 0.00 0.00 0.00
of all materials, curing, conveyance, taxes,
duties etc. all complete as per specification &
direction of Engineer-in-charge.
For 25mm to 110mm dia pipe to pass in
250mm thick wall
Providing all labour,T&P and cutting holes in
RCC chajja/roof/floor for taking pipes through
and making good the damages with supply of
all required materials etc. complete as per the
direction of the Engineer-in-charge.
183 59 Square Gully trap 110mm (IP) No. 7.00 807.12 5,649.84
Earth work in excavation by mechanical
means (Hydraulic excavator) / manual means
in foundation trenches or drains (not
exceeding 1.5 m in width or 10 sqm on plan),
188 64 including dressing of sides and ramming of 0 0.00 0.00 0.00
bottoms, lift upto 1.5 m, including getting out
the excavated soil and disposal of surplus
excavated soil as directed, within a lead of 50
Filling at all depth with available excavated
earth (excluding rock) in trenches, plinth,
sides of foundations etc. in layers not
exceeding 15cm in depth: consolidating each
deposited layer by ramming and watering
complete (lead upto 100m) as directed by the
Engineer-In-charge.
Supplying and filling in plinth with sand under
floors, including watering, ramming,
consolidating and dressing complete.
1:4:8 (1 Cement : 4 coarse sand (zone-III)
derived from natural sources : 8 graded stone
aggregate 40 mm nominal size
derived from natural sources)
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Providing, lifting, hoisting and laying
Reinforced cement concrete of M-25 grade
as per approved designs and drawings
having a minimum compressive strength (in
work test) 250 Kg. / Square cm. in 15 cm.
cubes at 28 days after mixing and test
conducted in accordance with I.S. 516 using
12 mm. to 20 mm. size black hard crushed
broken granite stone chips and screened and
washed sharp sand for mortar of approved
quality from approved quarry, washed and
cleaned ( 20mm. size chips not to exceeds 25
% ) to be mixed in concrete mixture with
Portland slag cement (PSC) including
hoisting, lowering, laying and compaction
concrete by using vibrators, watering and
curing for 28 days, centering and shuttering
then after dismantling and removing debris
from the work site and finishing the exposed
surface smooth providing grooves or beads
wherever necessary including cost,
conveyance, loading, unloading, royalties and
taxes of all materials and cost of all labours,
sundries, T & P required of the work etc.
complete in all respect as directed by the
Engineer-in-Charge. But excluding cost and
conveyance of M.S. rods or Tor steel and
binding wires and labour charges for
straightening, cutting, bending etc. of M.S.
rods or tor steel tying the grills and placing in
proper position.
Cutting, straightening coiled or bent up M.S.
Rod or tor steel of SAIL/ TATA / RINL
(VIZAG) make including bending, binding,
welding and joining if necessary and tying the
grills and placing in position as required for
R.C.C. Work and for providing fan hooks as
required, hoisting, lowering, laying including
cost, conveyances, taxes of M.S. Rod or tor
steel and binding wires of 18 to 20 gauge and
labour required for the work for bending,
binding and tying the grills in all floors (Linear
measurement will be taken and quantity will
be calculated basing on the standard weight
of B.I.S. for M.S. Rods or tor steel only.
Wastage if any, including weight of binding
wire will not be considered for measurement)
etc. complete as per specification & direction
of Engineer-in-charge.
199 75 12 mm cement plaster of mix : 0 0.00 0.00 0.00
201 77 Neat cement punning. SQM 33.24 80.00 2,659.33
Supplying and fixing 900mm dia SFRC cover
without frame for manhole including cost of
202 78 all materials, T&P, labour etc complete as per NOS 2.00 3398.40 6,796.80
direction of Engineer-in-charge.
2.5 cm thick grading concrete (1:2:2) on roof
203 79 slab with 6.7mm & down grades size hard sqm 8.87 359.07 3,184.99
granite crusher broken chips
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Earth work in excavation by mechanical
means (Hydraulic excavator) / manual means
in foundation trenches or drains (not
exceeding 1.5 m in width or 10 sqm on plan),
205 81 including dressing of sides and ramming of CUM 4.32 235.53 1,016.30
bottoms, lift upto 1.5 m, including getting out
the excavated soil and disposal of surplus
excavated soil as directed, within a lead of 50
Supplying and filling in plinth with sand under
floors, including watering, ramming,
consolidating and dressing complete.
Providing and laying plain cement concrete
1:4:8 (1 cement : 4 sand : 8 stone agregate
40mm nominal size) as levelling course in
floor and plinth including tempering, curring,
shuttering etc. complete all depth and height.
Brick work with non modular fly ash bricks
conforming to IS:12894, class designation 10
208 84 average compressive strength in super CUM 2.40 4758.82 11,397.38
structure above plinth level up to floor V level
Providing, lifting, hoisting and laying
Reinforced cement concrete of M-25 grade
as per approved designs and drawings
having a minimum compressive strength (in
work test) 250 Kg. / Square cm. in 15 cm.
cubes at 28 days after mixing and test
conducted in accordance with I.S. 516 using
12 mm. to 20 mm. size black hard crushed
broken granite stone chips and screened and
washed sharp sand for mortar of approved
quality from approved quarry, washed and
cleaned ( 20mm. size chips not to exceeds 25
% ) to be mixed in concrete mixture with
Portland slag cement (PSC) including
hoisting, lowering, laying and compaction
concrete by using vibrators, watering and
curing for 28 days, centering and shuttering
then after dismantling and removing debris
from the work site and finishing the exposed
surface smooth providing grooves or beads
wherever necessary including cost,
conveyance, loading, unloading, royalties and
taxes of all materials and cost of all labours,
sundries, T & P required of the work etc.
complete in all respect as directed by the
Engineer-in-Charge. But excluding cost and
conveyance of M.S. rods or Tor steel and
binding wires and labour charges for
straightening, cutting, bending etc. of M.S.
rods or tor steel tying the grills and placing in
proper position.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Cutting, straightening coiled or bent up M.S.
Rod or tor steel of SAIL/ TATA / RINL
(VIZAG) make including bending, binding,
welding and joining if necessary and tying the
grills and placing in position as required for
R.C.C. Work and for providing fan hooks as
required, hoisting, lowering, laying including
cost, conveyances, taxes of M.S. Rod or tor
steel and binding wires of 18 to 20 gauge and
210 86 labour required for the work for bending, QTL 0.16 10379.63 1,639.98
binding and tying the grills in all floors (Linear
measurement will be taken and quantity will
be calculated basing on the standard weight
of B.I.S. for M.S. Rods or tor steel only.
Wastage if any, including weight of binding
wire will not be considered for measurement)
etc. complete as per specification & direction
of Engineer-in-charge.
well sink with top and bottom cover of min 50
211 87 mm thk with cementing Khoa filling etc Nos 6.00 2360.00 14,160.00
CHAMBER(750X750X750)MM (5 nos)
Earth work in excavation by mechanical
means (Hydraulic excavator) / manual means
in foundation trenches or drains (not
exceeding 1.5 m in width or 10 sqm on plan),
213 89 including dressing of sides and ramming of 0 0.00 0.00 0.00
bottoms, lift upto 1.5 m, including getting out
the excavated soil and disposal of surplus
excavated soil as directed, within a lead of 50
Filling at all depth with available excavated
earth (excluding rock) in trenches, plinth,
sides of foundations etc. in layers not
exceeding 15cm in depth: consolidating each
deposited layer by ramming and watering
complete (lead upto 100m) as directed by the
Engineer-In-charge.
Supplying and filling sand in foundation and
over areas including watering, ramming,
consolidating and dressing, labours, tools,
taxes etc. all complete as per the
specification and direction of Engineer-In-
Providing and laying plain cement concrete
1:4:8 (1 cement : 4 sand : 8 stone agregate
40mm nominal size) as levelling course in
floor and plinth including tempering, curring,
shuttering etc. complete all depth and height.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Providing, lifting, hoisting and laying
Reinforced cement concrete of M-25 grade
as per approved designs and drawings
having a minimum compressive strength (in
work test) 250 Kg. / Square cm. in 15 cm.
cubes at 28 days after mixing and test
conducted in accordance with I.S. 516 using
12 mm. to 20 mm. size black hard crushed
broken granite stone chips and screened and
washed sharp sand for mortar of approved
quality from approved quarry, washed and
cleaned ( 20mm. size chips not to exceeds 25
% ) to be mixed in concrete mixture with
Portland slag cement (PSC) including
hoisting, lowering, laying and compaction
concrete by using vibrators, watering and
curing for 28 days, centering and shuttering
then after dismantling and removing debris
from the work site and finishing the exposed
surface smooth providing grooves or beads
wherever necessary including cost,
conveyance, loading, unloading, royalties and
taxes of all materials and cost of all labours,
sundries, T & P required of the work etc.
complete in all respect as directed by the
Engineer-in-Charge. But excluding cost and
conveyance of M.S. rods or Tor steel and
binding wires and labour charges for
straightening, cutting, bending etc. of M.S.
rods or tor steel tying the grills and placing in
proper position.
Cutting, straightening coiled or bent up M.S.
Rod or tor steel of SAIL/ TATA / RINL
(VIZAG) make including bending, binding,
welding and joining if necessary and tying the
grills and placing in position as required for
R.C.C. Work and for providing fan hooks as
required, hoisting, lowering, laying including
cost, conveyances, taxes of M.S. Rod or tor
steel and binding wires of 18 to 20 gauge and
labour required for the work for bending,
binding and tying the grills in all floors (Linear
measurement will be taken and quantity will
be calculated basing on the standard weight
of B.I.S. for M.S. Rods or tor steel only.
Wastage if any, including weight of binding
wire will not be considered for measurement)
etc. complete as per specification & direction
of Engineer-in-charge.
12mm cement plaster to out side of brick
surfaces with cement mortar of mix 1:4 (1
223 99 cement : 4 fine sand) including necessary 0 0.00 0.00 0.00
scaffolding, curing etc. all complete at all
floors and all heights.
225 101 Neat cement punning. SQM 10.00 27.38 273.76
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
2.5 cm thick A.S Flooring in C.C (1:2:4)
including punning using 12 mm size C.B hard
226 102 granite chips with cost of all labour & other CUM 2.81 359.07 1,009.90
materials etc complete.
GULLY CHAMBER(250X250X250)MM- 2 nos
Earth work in excavation by mechanical
means (Hydraulic excavator) / manual means
in foundation trenches or drains (not
exceeding 1.5 m in width or 10 sqm on plan),
228 104 including dressing of sides and ramming of 0 0.00 0.00 0.00
bottoms, lift upto 1.5 m, including getting out
the excavated soil and disposal of surplus
excavated soil as directed, within a lead of 50
Filling at all depth with available excavated
earth (excluding rock) in trenches, plinth,
sides of foundations etc. in layers not
exceeding 15cm in depth: consolidating each
deposited layer by ramming and watering
complete (lead upto 100m) as directed by the
Engineer-In-charge.
Supplying and filling sand in foundation and
over areas including watering, ramming,
consolidating and dressing, labours, tools,
taxes etc. all complete as per the
specification and direction of Engineer-In-
Providing and laying plain cement concrete
1:4:8 (1 cement : 4 sand : 8 stone agregate
40mm nominal size) as levelling course in
floor and plinth including tempering, curring,
shuttering etc. complete all depth and height.
Providing and laying in position ready mixed
M-25 grade concrete for reinforced cement
concrete work, using cement content as per
approved design mix, manufactured in fully
automatic batching plant and transported to
site of work in transit mixer for all leads,
having continuous agitated mixer,
manufactured as per mix design of specified
grade for reinforced cement concrete work,
including pumping of R.M.C. from transit
mixer to site of laying , excluding the cost of
centering, shuttering finishing and
reinforcement, including cost of admixtures in
recommended proportions as per IS : 9103 to
accelerate/ retard setting of concrete,
improve workability without impairing strength
and durability as per direction of the Engineer
(Note :- Cement content considered in this
item is @ 330 kg/cum. Excess/less cement
used as per design mix is
payable/recoverable separately).
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Cutting, straightening coiled or bent up M.S.
Rod or tor steel of SAIL/ TATA / RINL
(VIZAG) make including bending, binding,
welding and joining if necessary and tying the
grills and placing in position as required for
R.C.C. Work and for providing fan hooks as
required, hoisting, lowering, laying including
cost, conveyances, taxes of M.S. Rod or tor
steel and binding wires of 18 to 20 gauge and
labour required for the work for bending,
binding and tying the grills in all floors (Linear
measurement will be taken and quantity will
be calculated basing on the standard weight
of B.I.S. for M.S. Rods or tor steel only.
Wastage if any, including weight of binding
wire will not be considered for measurement)
etc. complete as per specification & direction
of Engineer-in-charge.
12mm cement plaster to out side of brick
surfaces with cement mortar of mix 1:4 (1
238 114 cement : 4 fine sand) including necessary 0 0.00 0.00 0.00
scaffolding, curing etc. all complete at all
floors and all heights.
240 116 Neat cement punning. SQM 2.00 27.38 54.75
2.5 cm thick A.S Flooring in C.C (1:2:4)
including punning using 12 mm size C.B hard
241 117 granite chips with cost of all labour & other CUM 0.13 359.07 44.88
materials etc complete.
Supplying all materials, labour, T&P and
construction man hole chamber of the
following size with cement concrete(1:3:6)
using 40mm size hard granite metal on bed,
1st class Fly ash brickwork in cement
mortar(1:6), moulding and shaping the
channel inside and benching with cement
concrete (1:2:4) using 12mm size h.g
chips,12mmthick cement plaster (1:3) with
punning to inside, cement flush pointing (1:3)
to outside, R.C.C cover slab in (1:1½:3) using
12mm size h.g chips with RCPC man hole
cover, earthwork in excavation in all kinds of
soil and refilling the cavity around the
chamber including watering, curing,
conveyance of all materials to worksite,
payment of royalty, taxes etc all complete as
per approved specification and direction of
the Engineer in charge
245 121 SEWERAGE PIPE LINE TRENCH. 0 0.00 0.00 0.00
Earth work in excavation by mechanical
means (Hydraulic excavator) / manual means
in foundation trenches or drains (not
exceeding 1.5 m in width or 10 sqm on plan),
246 122 including dressing of sides and ramming of CUM 17.50 219.95 3,849.16
bottoms, lift upto 1.5 m, including getting out
the excavated soil and disposal of surplus
excavated soil as directed, within a lead of 50
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Providing and laying in position cement
concrete of specified grade excluding the
cost of centering and shuttering - All work up
to plinth level :
1:3:6 (1 Cement : 3 coarse sand : 6 graded
248 124 stone aggregate 40 mm nominal size) CUM 3.00 5384.81 16,154.44
Supplying and filling sand in foundation and
over areas including watering, ramming,
consolidating and dressing, labours, tools,
taxes etc. all complete as per the
specification and direction of Engineer-In-
Supplying and filling in for CC lining 75 mm
all arround on PVC pipes and base along
250 126 with Jamuna sand under floors, including CUM 1.85 884.17 1,635.72
watering, ramming, consolidating and
dressing complete.
251 0 Sub-Total of Plumbing Works 0 0.00 0.00 8,31,448.70
252 0 Electrical Works 0 0.00 0.00 0.00
Recessed wirring to light point/ fan point/
exhaust fan point/ call bell point with 1.5
sq.mm FRLSH/LSZH PVC insulated copper
conductor of ISI marked Make-
Finolex/Anchor/Polycab/HAVELLS/RR
KABLE/KEI or equievalant reputed make A
catagory ISI marked as approved with 20 mm
dia PVC flexible non metallic conduit FRLS type
ISI marked Make-AKG/Anchor/Havells or
equievalant reputed make A catagory ISI
marked as approved 6A modular type (anti
bactorial & flame retradant type) switch ISI
marked Make-Schneider(Zencelo)/legrand(
Arteor) /Panasonic (vision) or equievalant
reputed make & model A catagory ISI marked
253 1 as approved, and ceiling rose ISI marked 0 0.00 0.00 0.00
Make- Anchor/Havells of modular type G.I box
with metallic cover plate (both side) (anti
bactorial & flame retradant type) Make-
Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision)or equievalant reputed
make & model A catagory ISI marked as
approved of suitable size, modular box with
1.5 sq. Mm FRLSH PVC insulated single core
multistandard copper conductor as earth wire
including all accessories and connection as per
direction of Engineer -in -Charge. CATAGORY
AS FOLLOWS ,complete suitable for IPH
standard hospital. All the switches & sockets
should be warrantied for a replacement period
of 2 years against defects with ncessary test
report & Warrnaty certificate to be submitted
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Group control of point in Recessed wirring to
light point/ fan point/ exhaust fan point/ call
bell point with 1.5 sq.mm FRLSH/LSZH PVC
insulated copper conductor of ISI marked
Finolex/Anchor/Polycab/HAVELLS or
equievalant reputed make A catagory ISI
marked as approved as approved 20 mm dia
PVC flexible non metallic conduit FRLS type ISI
marked Make-AKG/Anchor/Kinjal or
equievalant reputed make A catagory ISI
marked as approved with 6A modular
type((anti bactorial & falme retradant type))
switch ISI marked Make-
Schneider(Zencelo)/legrand( Arteor)
257 5 /Panasonic (vision) or equievalant reputed Nos 16.00 1211.86 19,389.76
make & model A catagory ISI marked as
approved, and ceiling rose ISI marked Make-
Schneider(Zencelo)/legrand( myrius)
/Panasonic (Equievalant model) or equievalant
reputed make & model A catagory ISI marked
as approved of modular type G.I box with
metallic cover plate (both side)(anti bactorial &
falme retradant type) Make-
Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision)or equievalant reputed
make & model A catagory ISI marked as
approved, of suitable size, modular box with
1.5 sq. Mm FRLS PVC insulated single core
multistandard copper conductor as earth wire
including all accessories and connection as per
direction of Engineer -in -Charge. CATAGORY
Supplying ,fixing of 6A Plug on the same board
in existing switch board with complete fitting
by 01 no of 6A switch & socket (modular type)(
(anti bactorial & flame retradant type)) & other
required accessories of ISI marked as approved
as per direction of Engg. -in -Charge. Make-
Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision) or equievalant reputed
make & model A catagory ISI marked as
approved, complete suitable for IPH standard
hospital.(Maximum 02 nos point in one
258 6 circuit).All the switches & sockets should be Nos 16.00 227.74 3,643.84
warrantied for a replacement period of 2 years
against defects with ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to avail
free aftersales service within warranty period
for acceptance of materials.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying,fixing of 6A Plug on the separate
board with complete fitting by 01 no of 6A
switch & socket(modular type)( (anti bactorial
& flame retradant type)) with suitable size
modular box & cover(anti bactorial & falme
retradant type) including supplying of all
required accessories of ISI marked as
approved as per direction of engg-in-
charge..Make-Schneider(Zencelo)/legrand(
Arteor) /Panasonic (vision) or equievalant
make & model ISI marked as approved ,
complete suitable for IPH standard
hospital.(Maximum 02 nos point in one
259 7 circuit).All the switches & sockets should be Nos 25.00 599.44 14,986.00
warrantied for a period of 10 years against
manufacturing defects against which ncessary
test report & Warrnaty certificate to be
submitted to the department for genuinity of
product & to avail free aftersales service within
warranty period for acceptance of materials.
Supplying,fixing of 1x16A Plug on the separate
board with complete fitting by 01 no of 16A
switch & socket(modular type)((anti bactorial
& flame retradant type)) with suitable size
modular box & cover(anti bactorial & falme
retradant type) including supplying of all
required accessories of ISI marked as
approved as per direction of engg-in-charge..
Make-Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision)or equievalant reputed
make A catagory ISI marked as approved, (For
equipement power)All the switches & sockets
260 8 should be warrantied for a replacement period Nos 12.00 761.10 9,133.20
of 10 years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product & to
avail free aftersales service within warranty
period for acceptance of materials.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying,fixing of 2x6A+1X1 6A Plug on the
separate board with complete fitting by 01 no
of 16A+2 no 6A switch & socket(modular type)
( (anti bactorial & falme retradant type) with
suitable size modular box & metallic cover
plate (both side)(anti bactorial & falme
retradant type)including supplying of all
required accessories of ISI marked as
approved as per direction of engg-in-
charge..Make-Schneider(Zencelo)/legrand(
Arteor) /Panasonic (vision)or equievalant
reputed make & model A catagory ISI marked
as approved, (For equipement power)complete
261 9 suitable for IPH standard hospital.(Maximum Nos 10.00 1629.58 16,295.80
02 nos point in one circuit).All the switches &
sockets should be warrantied for a
replacement period of 10 years against defects
with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Supplying,fixing of 3x6A+1X1 6A Plug on the
separate board with complete fitting by 01 no
of 16A+3 nos 6A switch & socket(modular
type) ( (anti bactorial & falme retradant type)
with suitable size modular box & metallic cover
plate (both side)(anti bactorial & falme
retradant type)including supplying of all
required accessories of ISI marked as
approved as per direction of engg-in-
charge..Make-Schneider(Zencelo)/legrand(
Arteor) /Panasonic (vision)or equievalant
reputed make & model A catagory ISI marked
as approved, (For equipement power)complete
262 10 suitable for IPH standard hospital.(Maximum Nos 3.00 2323.42 6,970.26
02 nos point in one circuit).All the switches &
sockets should be warrantied for a
replacement period of 10 years against defects
with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free after
sales service within warranty period for
acceptance of materials.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Receass wiring for circuit/submain wiring with
the following mentioned size PVC FRLSH/LSZH
insulated, copper conductor, single core cable
(Finolex/Anchor/Polycab/ HAVELLS/RR
KEBLE) or equievalant reputed make A
catagory ISI marked as approved, in recessed
PVC conduit Heavy duty FRLS of mentioned
263 11 size (AKG/Anchor/Kinjal or equievalant ISI 0 0.00 0.00 0.00
marked as approved) as required as per
direction of Engg.-in-Charge. Ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product & to
avail free after sales service within warranty
period for acceptance of materials
2 nos single core 1.5 sq. mm copper wire for
phase and neutral and 01 no of single core 1.5
sq. mm copper wire for earth continuty
264 12 conductor. In 20 mm dia non metallic heavy Mtr 176.00 154.58 27,206.08
duty flexible conduit (LDB to LSB/LIGHT
2 nos single core 2.5 sq. mm copper wire for
phase and neutral and 01 no of single core 1.5
sq. mm copper wire for earth continuty
conductor in 20 mm dia non metallic heavy
duty flexible conduit.(BDB to LSB/LIGHT
CKT/5A PLUG/INVERTER POINT TO EACH
4 nos single core 2.5 sq. mm copper wire for
phase and neutral and 02 nos of single core 2.5
sq. mm copper wire for earth continuty
266 14 conductor .in 25 mm dia non metallic heavy Mtr 243.00 310.34 75,412.62
duty flexible conduit(LDB to LSB/5A SOCKET)
2 nos single core 4 sq. mm copper wire for
phase and neutral and 01 no of single core 1.5
sq. mm copper wire for earth continuty
conductor in 20 mm dia non metallic heavy
267 15 duty flexible conduit .(PDB to PSB/ GAYSER Mtr 112.00 192.34 21,542.08
POINT/AC POINT/ROOM LIGHT CONTROL TO
CORRIDOOR POINT/DG PANEL ESSENTIAL
LOAD) (2X4+1X1.5)
4 nos single core 4 sq. mm copper wire for
phase and neutral and 02 nos of single core 2.5
sq. mm copper wire for earth continuty
conductor in 32 mm dia non metallic heavy
268 16 duty flexible conduit.(PDB to PSB/GAYSER. Mtr 65.00 289.10 18,791.50
POINT/AC POINT/DG PANEL ACCL TO EACH
QTR ESSENTIAL LOAD) (4X4+2X2.5)
2 nos single core 6 sq. mm copper wire for
phase and neutral and 01 no of single core 2.5
sq. mm copper wire for earth continuty
269 17 conductor in 25 mm dia non metallic heavy Mtr 24.00 228.92 5,494.08
duty flexible conduit .(LFDB TO LBDB)
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
4 nos single core 6 sq. mm copper wire for
phase and neutral and 02 nos of single core 2.5
sq. mm copper wire for earth continuty
270 18 conductor in 32 mm dia non metallic heavy Mtr 322.00 343.38 1,10,568.36
duty flexible conduit.(LFDB TO LBDB/power
unit/point) (4X6+2X2.5)
4 nos single core 10 sq. mm copper wire for
phase and neutral and 02 nos of single core 4
sq. mm copper wire for earth continuty
271 19 conductorin 32 mm dia non metallic heavy Mtr 20.00 493.24 9,864.80
duty flexible conduit .(LFDB TO FLOOR PANEL
TO TPN BDB light ) (4X10+2X4)
4 nos single core 16 sq. mm copper wire for
phase and neutral and 02 nos of single core 10
sq. mm copper wire for earth continuty
272 20 conductor in 40 mm dia non metallic heavy Mtr 24.00 746.94 17,926.56
duty flexible conduit.(FLOOR PANEL TO TPN
BDB power) (4X16+2X10)
Supplying and fixing 20 amps, 240 volts, SPN,
industrial type socket outlet, with 2 pole and
earth metal enclosed plug top along with 32
amps. C-series, SP MCB, in sheet steel
enclosure, on surface or in recess, with chained
metal cover for the socket outlet, and complete
with connections, testing and commissioning
etc. as required as per direction of Engg.-in-
Charge.. . Make-
Legrand/Schneider/Siemens/panasonic or
equievalant reputed make & model A catagory
273 21 ISI marked as approved,All the Components Nos 10.00 726.88 7,268.80
should be warrantied for a replacement period
of 5 years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product & to
avail free aftersales service within warranty
period for acceptance of materials.
Supplying and fixing 32 amps, 415 volts, TPN,
industrial type socket outlet, with 4 pole and
earth metal enclosed plug top along with 32
amps. C-series, TP MCB, in sheet steel
enclosure, on surface or in recess, with chained
metal cover for the socket outlet, and complete
with connections, testing and commissioning
etc. as required as per direction of Engg.-in-
Charge.. . Equievalant higher model of Make-
Legrand/Schneider/Siemens/panasonic
274 22 equievalant reputed make & model A catagory Nos 2.00 5128.28 10,256.56
ISI marked as approved.All the Components
should be warrantied for a replacement period
of 5 years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product & to
avail free aftersales service within warranty
period for acceptance of materials.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing following size/ modules,
GI box along with modular base & metallic
cover plate (both side)(anti bactorial type)
plate for modular switches in recess etc as
required as per direction of Engg.-in-Charge.
MAKE-Legrand/Siemens/Anchor/Panasonic/
Schneider or equievalant reputed make &
model A catagory ISI marked as approved .All
275 23 the Components should be warrantied for a 0 0.00 0.00 0.00
replacement period of 5 years against defects
with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Supplying and fixing of following sizes of
medium class PVC FRLS conduit ISI marked
along with accessories in surface/recess
including cutting the wall and making good the
279 27 same in case of recessed conduit as required as 0 0.00 0.00 0.00
per direction of Engg.-in-Charge .MAKE
KINJAL/ AKG/Anchor or equievalant reputed
make A catagory ISI marked as approved
Supply and fixing modular type indicator on
the existing switch box/cover . Equievalant
higher model of
Schneider/Hager/Siemens/Anchor/Panasonic
make or equievalant reputed make & model A
catagory ISI marked as approved as required as
per direction of Engg.-in-Charge.All the
282 30 Components should be warrantied for a Nos 15.00 126.26 1,893.90
replacement period of 5 years against defects
with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Supplying and installation of AC starter
Modular type, Equievalant higher model of
Schneider/Hager/Siemens/Anchor/Panasonic
make or equievalant reputed make & model A
catagory ISI marked as approved coil voltage-
415 Volt A.C. & O/L range of 9-14A range on
mod Box of suitable size including modular
coveras required as per direction of Engg.-in-
283 31 Charge .All the Components should be Nos 10.00 730.42 7,304.20
warrantied for a replacement period of 5 years
against defects with ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to avail
free aftersales service within warranty period
for acceptance of materials.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supply and fixing CALL bell (Ding dong type)
/Buzzer on the existing switch box/cover.
Equievalant higher model of
Schneider/Hager/Siemens/Anchor/Panasonic
make or equievalant reputed make & model A
catagory ISI marked as approved .as required
as per direction of Engg.-in-Charge.All the
284 32 Components should be warrantied for a Nos 2.00 241.90 483.80
replacement period of 5 years against defects
with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
S/F of Bakelite angle holder/batten holder
(make-Anchor/Havells/Panasonic or
equievalant reputed make A catagory ISI
marked as approved )of ISI marked conforming
to IS-1258/1987 in place of ceiling rose as per
direction of Engg.-in-Charge .All the
Components should be warrantied for a
285 33 replacement period of 5 years against defects EACH 10.00 71.98 719.80
with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Supplying,fixing of Blanking plate(modular
type)( (anti bactorial & flame retradant type))
in existing switch box(anti bactorial & flame
retradant type) including supplying of all
required accessories of ISI marked as
approved as per direction of engg-in-
charge..Make-Schneider(Zencelo)/legrand(
Arteor) /Panasonic (vision), complete suitable
for IPH standard hospital.It should be
warrantied for a period of 10 years against
manufacturing defects against which ncessary
test report & Warrnaty certificate to be
submitted to the department for genuinity of
product & to avail free aftersales service within
warranty period for acceptance of materials.
287 35 Sub-Head II (Light fitting Fixture & Fan) 0 0.00 0.00 0.00
Supplying, installation, of exhaust fan of heavy
duty 300 mm sweep (Make-Equievalant higher
model with 5 star rated of
Havells/almonard/Anchor/Panasonic/Usha or
equievalant reputed make & model A catagory
ISI marked as approved ) of exhaust fan in the
288 36 existing wall, including fixing & conntection as Nos 4.00 3683.96 14,735.84
required as per direction of Engg.-in-Charge.
Replacement Warranty will be 5 years.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying, installation, of exhaust fan of heavy
duty 380 mm sweep 1400 rpm with louvers
Make-Equievalant higher model with 5 star
Havells/almonard/Anchor/Panasonic/Usha or
289 37 equievalant reputed make & model A catagory Nos 4.00 4334.14 17,336.56
ISI marked as approved ) of exhaust fan in the
existing wall, including fixing & conntection .as
required as per direction of Engg.-in-Charge.
Replacement Warranty will be 5 years.
Supplying, installation, testing and
commssioning of 1400 mm sweep white/milky
colour ceiling fan Make-Equievalant higher
model with 5 star rated of
Havells/almonard/Anchor/Panasonic/Usha or
equievalant reputed make & model A catagory
ISI marked as approved ) including wiring the
290 38 down rod of standard length (upto 30 cm) with Nos 7.00 2607.80 18,254.60
1.5 sq mm PVC insulated, copper conductor,
single core cable etc. as required.(With fan
Regulator) as required as per direction of Engg.-
in-Charge.Replacement Warranty will be 5
Supplying, installation, testing and
commssioning of 1200 mm sweep white/milky
colour ceiling fan Make-Equievalant higher
model with 5 star rated of
Havells/almonard/Anchor/Panasonic/Ushaor
equievalant reputed make & model A catagory
ISI marked as approved ) including wiring the Nos 8.00 2505.14 20,041.12
down rod of standard length (upto 30 cm) with
1.5 sq mm PVC insulated, copper conductor,
single core cable etc. as required as per
direction of Engg.-in-Charge,Replacement
Warranty will be 5 years.. .(With fan Regulator)
Supplying and fixing of Energy efficient
Recess mounted LED luminaire made up of
CRCA powder coated sheet steel housing of
595 X 595 mm x 70 mm size with of not more
than 25W and system lumens output not less
than 3250 lumens (130 lm/ wt) with
diffusers for better light transmission and pure
effect with High luminous flux LEDs for better
light output, CRI not less than 80, CCT of 5700-
6500 degree K, THD less than 10%,internal
surge protection of 3 KV, complete with Non
integrated isolated electronic driver (protects
292 40 the output /secondary side from any No 10.00 3158.86 31,588.60
disturbance on the input / primary side
ensuring safe operation)and all other
accessories suitable for operation on140- 270
V, 50 Hz ,L70 @50,000 burning hrs (5 years
warranty)supply .as required as per direction
of Engg.-in-Charge (Make:
Panasonic/LT/Trilux /Philips/Wipro or
equievalant reputed make & model A catagory
ISI marked as approved.) . The luminaire must
be Replacement Warranty will be 5 years.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing of Energy efficient
surface mounted square shape 20 W LED
luminaire of dimension of 225x 225 x 35 mm
consists of white powder coated , die-cast
Alluminium housing with high quality frosted
diffuser for glare-free uniform lighting
distribution with wattage not more than 20
watt and lumen output of 1500 lumens, , CRI
not less than 80,CCT of 6000 degree K,THD
less than 10%, with electronic driver, internal
293 41 surge protection of 2.5 KV , L70 B50: 30000 hrs Nos 14.00 1791.24 25,077.36
(2 yrs warranty) and all other accessories
suitable for operation on 220 V to 240 V
supply as required as per direction of Engg.-in-
Charge. ( Make : Panasonic
/Trilux/Osram/PHILIPS/Wipro or equievalant
reputed make & model A catagory ISI marked
as approved).The luminaire should be
Replacement Warranty will be 5 years
Supplying and fixing of Energy efficient
recess mounted LED luminaire with white
powder coated ,pressure die-cast Al housing
,with high transmititivity,non-yellowing PMMA
diffuser, with wattage not more than 20 watt
and lumen output not less than 2600 Lumen (
130 lumens/watt ) of size 595 x595 x 70 mm ,
,CRI not less than 80,CCT of 5700-6500 degree
K,THD less than 10%, with Non integrated
isolated driver (protects the output
/secondary side from any disturbance on the
294 42 input / primary side ensuring safe operation), Nos 57.00 2865.04 1,63,307.28
all other accessories , life : 50,000 burning
hours (5 years warranty) , Internal surge
protection of 3 KV suitable for operation on
230 V, 50 Hz supply as required as per
direction of Engg.-in-Charge. ( Make :
Panasonic / LT /Wipro/PHILIPS or
equievalant reputed make & model A catagory
ISI marked as approved.) The luminaire should
be Replacement Warranty will be 5 years.
SITC of energy efficient LED tube light fittings
with decorative alluminium batten and LED
tube light having power rating not more than
20 watt and lumen output not less than 2200
lumen complete with electronic driver and all
other accessories with diffuser having 5 years
warranty i/c connection etc as required as per Nos 10.00 940.46 9,404.60
direction of Engg.-in-Charge. (Similar to
Panasonic/PHILIPS/LT/wipro or equievalant
reputed make & model A catagory ISI marked
as approved.). The luminaire should be
Replacement Warranty will be 5 years .
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
SITC of Sleek LED 10 watt mirror light fitting
with extruded polycarbonate housing,High
optically efficient diffuser,above wash basin
complete with all accessoriesetc. directly on
wall, including connection with 1.5 sq. mm
FRLS PVC insulated, copper conductor, single
core cable and earthing etc. as required as per Nos 6.00 863.76 5,182.56
direction of Engg.-in-Charge.
( Make : WIPRO / PHILIPS/Panasonic or
equievalant reputed make & model A catagory
ISI marked as approved. )The luminaire should
be Replacement Warranty will be 5 years
SITC of IP 20 Non-integral flexible LED strip
light,High optically efficient diffuser,, 4000K
with 12 w/mtr @ 5Mtr pool with Driver extra
as required as per direction of Engg.-in-Charge
297 45 ( Make : Panasonic PHILIPS/Wipro or Nos 2.00 1792.42 3,584.84
equievalant reputed make & model A catagory
ISI marked as approved. )The luminaire should
be Replacement Warranty will be 5 years
Supplying and fixing of small focus light for
small monuments as 30W , 5700 K required as
per direction of Engg.-in-Charge Make :
Panasonic/PHILIPS/LT/WIPRO or equievalant
reputed make & model A catagory ISI marked
as approved.)The luminaire should be
Replacement Warranty will be 5 years
Supplying and fixing extra conduit down rod of
20 cm length G.I. pipe 15 mm dia, heavy gauge
including painting etc. as requiredas required
as per direction of Engg.-in-Charge .
299 47 (Note : More than 5 cm length shall be rounded Nos 25.00 38.94 973.50
to the nearest 10 cm and 5 cm or less shall be
ignored)of ISI mark as approved.
300 48 BDBS,DB,AC DB,FLOOR PANELS,MCBS 0 0.00 0.00 0.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing of following mentioned
way, three pole/single pole and neutral, sheet
steel,double door MCB distribution board, 415
volts/240 volts shall be as per IEC 61439-
3,integrated door earthing system offering
additional safety to the user,High quality
polyurethane Gasket,the box and cover shall be
fabricated to withstand IK09,the DB should be
properly pre-treated with 7 tank process and
duly powder coated, phosphatized with
powder coated finish, on surface/recess,
complete with terminal blocks,with suitable
size FR PVC insulated copper conducter up to
terminal blocks, tinned copper busbar, neutral
301 49 busbar, earth bar, din bar. Make-LEGRAND- 0 0.00 0.00 0.00
Ekinox3 DB/ Siemens-Betaguard/ Schneider-
Acti 9/Panasonic(Equivalant model)
/ABB(Equivalant model) or equievalant
reputed make & model A catagory ISI marked
as approved. as per direction of Engg.-in-
Charge. The Distribution boards should be
Replacement Warranty will be 5 years
4 Way(8+12) Way TPN MCB DD DB Horizontal
Type as per IEC 61439-3 suitable for Flush
mounting and Surface mounting with 100A
Copper Bus Bar for each phase, with neutral
Bus bar, Earth Bar & Cable ties for cable
management, prefitted masking sheet, IP43-
IK09 with metal door(FOR LIGHT,POWER
INDOOR,3-PH,POWER LOAD) Warranty on DB
Supply and fixing of 12 way DD single pole and
neutral sheet steel MCB distribution board
250V on surface/recess complete with tinned
copper bus bar, neutral bus bar, earth bar, din
bar, detachable gland plate, interconnections,
phosphatized and powder painted including Nos 3.00 2249.08 6,747.24
earthing etc. as required (but with out MCB/
RCCB/ Isolator) (ALL LIGHT WITH
CORRIDOOR/COMMON AREA,EM LIGHT,UPS
LOAD, EM LOAD LIGHT LOAD,POWER LOAD )
2+4 way MCB Enclosure DB (GLAZED
304 52 door)(only each EM. CONNECTION UPS LOAD) Nos 2.00 1926.94 3,853.88
8 Way(8+24) Way TPN MCB DD DB Horizontal
Type as per IEC 61439-3 suitable for Flush
mounting and Surface mounting with 100A
Copper Bus Bar for each phase, with neutral
305 53 Bus bar, Earth Bar & Cable ties for cable Nos 2.00 3188.36 6,376.72
management, prefitted masking sheet, IP43-
IK09 with metal door(FOR LIGHT,POWER
INDOOR,3-PH,POWER LOAD)
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing 20 amps rating, 240 volts,
C series, Double poles MCB of Make-LEGRAND-
Ekinox3 DB/ Siemens-Betaguard/ Schneider-
Acti 9/L&T (Equievalant
model)/Panasonic(Equivalant model)
/ABB(Equivalant model) or equievalant
reputed make & model A catagory ISI marked
as approved in the existing MCB DB complete
306 54 with connections as per direction of Engg.-in- Nos 2.00 392.94 785.88
Charge. The MCB should be Replacement
Warranty will be 5 years .MCB should have the
fault indication system in different colour for
ON, OFF & TRIP condition or Mid trip position
for Trip conditions for easier identification of
fault.Warranty on MCB is 5 years.
Supplying and fixing 6 amps to 32 amps rating,
240 volts, C series, single poles MCB of Make-
LEGRAND-Ekinox3 DB/ Siemens-Betaguard/
Schneider- Acti 9/L&T (Equievalant
model)/Panasonic(Equivalant model)
/ABB(Equivalant model) or equievalant
reputed make & model A catagory ISI marked
as approved. the existing MCB DB complete
307 55 with connections as per direction of Engg.-in- Nos 66.00 155.76 10,280.16
Charge. The MCB should be Replacement
Warranty will be 5 years.MCB should have the
fault indication system in different colour for
ON, OFF & TRIP condition or Mid trip position
for Trip conditions for easier identification of
fault.Warranty on MCB is 5 years.
Supplying and fixing 40 Amps rating, TPN, 415
volts, RCCB,300mA .Make-Equievalant higher
model of Legrand/Snheider/Siemens /
L&T/Panasonic /ABB or equievalant reputed
make & model A catagory ISI marked as
approved in the existing MCB DB complete
308 56 with connections, testing and commissioning Nos 2.00 2650.28 5,300.56
etc. as required as per direction of Engg.-in-
Charge. .(4W TPN BDB IC)AC ODU
CONTROLLER). The RCCB should be
Replacement Warranty will be 5 years
Supplying and fixing 25Amps DP 240 volts,
RCCB,300mA Make-Equievalant higher model
of Legrand/Snheider/Siemens /
L&T/Panasonic /ABBor equievalant reputed
make & model A catagory ISI marked as
approved in the existing MCB DB in the
existing MCB DB complete with connections as
per direction of Engg.-in-Charge. The RCCB
should be Replacement Warranty will be 5
Supplying and fixing 40Amps DP 240 volts,
RCCB,300mA Make-Equievalant higher model
of Legrand/Snheider/Siemens /
L&T/Panasonic /ABB or equievalant reputed
make & model A catagory ISI marked as
approved in the existing MCB DB in the
existing MCB DB complete with connections as
per direction of Engg.-in-Charge. The RCCB
should be Replacement Warranty will be 5
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing 63Amps DP 240 volts,
RCCB,300mA Make-Equievalant higher model
of Legrand/Snheider/Siemens /
L&T/Panasonic /ABB or equievalant reputed
make & model A catagory ISI marked as
approved in the existing MCB DB in the existing
MCB DB complete with connections as per
direction of Engg.-in-Charge.The RCCB should
be Replacement Warranty will be 5 years
Supplying and fixing 63Amps TPN 415 volts,
RCCB,300mA Make-Equievalant higher model
of Legrand/Snheider/Siemens /
L&T/Panasonic /ABB or equievalant reputed
make & model A catagory ISI marked as
approved in the existing MCB DB in the Nos 2.00 3116.38 6,232.76
existing MCB DB complete with connections as
per direction of Engg.-in-Charge.(for power
BDB & AC ODU, 8 way TPN BDB IC).The RCCB
should be Replacement Warranty will be 5
313 61 (Earthing) INSTALLATION 0 0.00 0.00 0.00
S/IT/C Of Earthing with copper earth plate 600
mm x 600mm x 6 mm thick ISI marked
including accessories and providing masonary
with cover plate having loccking arrangement
and watering pipe etc (WITH charcoal and
314 62 salt) as required as per direction of Engg.-in- Nos 2.00 16398.46 32,796.92
Charge. The entire earthing system should be
Replacement Warranty will be 5 years
Providing and fixing 4 mm dia copper wire on
315 63 surface or in recess for loop earthing as Mtr 68.00 113.28 7,703.04
required.as per direction of Engg.-in-Charge.
Providing and fixing 25mm x 5 mm copper
strip on surface or in recess for connections etc.
as required as per direction of Engg.-in-Charge.
Supplying and making brick massonary
pedastal with extra super structure including
cement plastering etc as required as per
direction of Engg.-in-Charge.
CABLING AND END TERMINATION MAIN
Supplying of one number PVC insulated
armoured and PVC sheathed XLPE property
AL. conductor power cable of 1.1 KV grade
POLYCAB/HAVELLS/Finolex or equievalant
reputed make ISI marked as approved of
following size cables as per direction of Engg.- 0 0.00 0.00 0.00
in-Charge. Ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free after
sales service within warranty period for
acceptance of materials
321 69 4 core x 4 sq mm (for small power) Mtr 19.00 103.69 1,970.05
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not exceeding
25 SQ. MM direct in ground in the trench in
one horizental formation including excavation
,sand coushing protection covering and refilling
the trench etc as required as per direction of
Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding 25
SQ. MM but not exceeding 120 SQ. MM direct
in ground in the trench in one horizental
formation including excavation ,sand coushing
protection covering and refilling the trench etc
as required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not exceeding
327 75 25 SQ. MM direct in ground in the EXISTING Mtr 10.00 49.56 495.60
PIPE etc as required as per direction of Engg.-in
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding 25
328 76 SQ. MM but not exceeding 400 SQ. MM direct Mtr 10.00 68.44 684.40
in ground in the EXISTING PIPE etc as required
as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not exceeding
25 SQ. MM in open duct etc as required as per
direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding 25
330 78 SQ. MM in open duct 400 SQ. MM direct in Mtr 10.00 54.28 542.80
ground in the EXISTING PIPE etc as required as
per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not exceeding
331 79 25 SQ. MM in surface with shaddle and screw Mtr 10.00 95.58 955.80
etc as required as per direction of Engg.-in -
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not exceeding
332 80 400 SQ. MM From 120 SQ. MM in surface with Mtr 8.00 154.58 1,236.64
shaddle and screw etc as required as per
direction of Engg.-in -charge.
Supplying and making end termination with
brass compression gland and aluminium lugs
for following mentioned size cable.as per
direction of Engg.-in-Charge.
Providing,fixing and laying of following dia G.I.
pipe (medium class) in ground complete with
337 85 G.I fitting incl. trenching(75 mm depth)and 0 0.00 0.00 0.00
refilling as per direction of Engg.-in-Charge.
Providing,fixing and laying of fallowing dia
HDPE pipe (medium class) in ground complete
339 87 with fitting incl. trenching(75 mm depth)and 0 0.00 0.00 0.00
refilling as per direction of Engg.-in-Charge.
341 89 MAIN CONTROL PANEL AT GF 0 0.00 0.00 0.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
S/I/T&Commissioning of LT indoor floor
mounted cubical type electrical main panel (for
both light and power circuit) made out by 2mm
CRCA steel sheet duly derusted & painted by
siemens gray powder cote paint is designed as
342 90 G.A drawing as per direction of Engg.-in- Set 1.00 208706.60 2,08,706.60
Charge.Warrentee period of replacement of
panel & accessories must be 5 years &
compelete test certificate must be submitted
along with panel board including component
In commer-1-01 number of 250A 4P
Icu=100%Ics,0, LSIG MCCB with micro
processor based release Electrical locking for
normal & DG (make-
ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI
marked)(HVAC & MEDICAL
EQUIPEMENT)(200 KVA TRANSFORMER)
In commer-2-01 number of 160A 4P
Icu=100%Ics, 0 LSIG MCCB with micro
processor based release with adjustable
overload from 36%-100% & Electrical locking
for normal & DG (make-
ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI
marked) along with 01 no of 160A 4P onload
changeover switch (125 KVA DG 01 NO)
Busbar-1&2 04 numbers of 300Amps
Aluminium busbar with 1A/SQ.MM current
345 93 carring capacity. busbar duly sleeved by color 0 0.00 0.00 0.00
coated PVC sleeve & supported by suitable size
DMC insulator. (for outgoing)
Out going- 04 numbers of 63A 4P MCB (make-
Legrand or equivalent reputed make ISI
marked)BDB P/AC,(P/L GF,IF,UPS,WATER
LAB,EQUIPEMENT)
Out going- 1 numbers of 125A 4P Icu=50%Ics,
LSIG MCCB withTMR based release with
347 95 adjustable overload (make- 0 0.00 0.00 0.00
LEGRAND/Schneider/ABB/Siemens, ISI
marked)(RAW POWER)
Out going- 4 numbers of 32A 4P MCB ((make-
ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI
marked)(LIGHT SUPPLY)
Instrument- (i) 03 numbers phase indicating
349 97 lamp with toggle switch & HRC fuse. 0 0.00 0.00 0.00
(ii) 02 set of digital type multifunction meter
with CT for voltage,current,frequency,PF,THD
350 98 indication with RS 485 COMPACTIVITY FOR 0 0.00 0.00 0.00
(iii) 4 nos of 65kA SP VSD WITH 32A SP MCB
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-
1461 , CARBON STEEL WIRE MESH CABLE
TRAYS with internal dimensions of size
54mm(H) x 200mm(W), of Legrand - Cablofil
make or equievalant reputed make & model A
catogory, ISI marked as approved .The Load
bearing capacity of the Cable Trays should be
minimum of 104.8Kg/meter at the span of
352 100 1.5Meter as per UL specifications.(With all mtrs 6.00 702.10 4,212.60
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge. Warrentee period oftray must
be 5 years & compelete test certificate must be
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-
1461 , CARBON STEEL WIRE MESH CABLE
TRAYS with internal dimensions of size
54mm(H) x 300mm(W), of Legrand - Cablofil
make or equievalant reputed make & model A
catogory, ISI marked as approved .The Load
bearing capacity of the Cable Trays should be
minimum of 104.8Kg/meter at the span of
1.5Meter as per UL specifications.(With all
353 101 accessories,bend,cover,supporter)WITH mtrs 8.00 814.20 6,513.60
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge. Warrentee period oftray must
be 5 years & compelete test certificate must be
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-
1461 , CARBON STEEL WIRE MESH CABLE
TRAYS with internal dimensions of size
54mm(H) x 400mm(W), of Legrand - Cablofil
make or equievalant reputed make & model A
catogory, ISI marked as approved .The Load
bearing capacity of the Cable Trays should be
minimum of 104.8Kg/meter at the span of
1.5Meter as per UL specifications.(With all
354 102 accessories,bend,cover,supporter)WITH mtrs 8.00 1077.34 8,618.72
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge. Warrentee period oftray must
be 5 years & compelete test certificate must be
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
GALVANIZED(GC) AS PER EN-ISO-1461 ,
FLOOR RACE WAY WITH JUNCTION with
internal dimensions of size 38mm(H) x
225mm(W), of reputed make ISI marked as
approved .(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge.(3 COMPARTMENT TOTAL 54
MM HEIGHT,COST WITHOUT GST,WITH LESS
DISCOUNT(REPUTED FACTORY MADE ISI
356 0 Sub-Total of Electrical Works 0 0.00 0.00 12,73,297.59
357 Grand Total 69,54,179.42
357 Grand Total 69,54,179.42
Digitally signed by Rakesh
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
5 NIT.pdf
Tender Document
3a GCC Contracting with Ammendment 4.pdf
Tender Document
3b SCC.pdf
Tender Document
8 Milestone.pdf
Tender Document
11 BOQ SAM 007 PM ABHIM.pdf
Tender Document
13 List of Approved Makes NHM Project Odisha.pdf
Tender Document
14 Scope of Work.pdf
Tender Document
BPHU Drawings.pdf
Tender Document
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .