Repair replacement to boundary wall and other misc items at Kanjoli line Bharatpur

Amount

Demolition of brickwork or stone boulder masonry built in cement mortar including all quoins, arches, pillars, precast articles etc, complete all as specified.

M & L for brick work with sub-class 'B' bricks, straight or curved on plan exc 6.0 metre mean radius as wall built in cement & sand mortar 1:6, complete all as specified.

M&L Precast cement concrete type B0 (1:2:4) using 12.5 mm graded stone aggregate Set in CM(1:4) louvres and jallies, 50 mm thick (measured solid), including all mouldings but excluding frame complete all as specified.

Taking down cement or cement lime plaster of any description from brick or stone walls including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified.

M&L for rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement, complete all as specified.

M&L for preparation of new surface and applying two coats of cement base paint of approved shade on walls over one coat of water based white pigmented alkali resistant priming paint complete all as specified.

M&L for preparation of old surface and applying one coat of cement base paint of on walls complete all as specified .

Dismantling posts or struts (wood, steel or R.C.C.) embedded in concrete, brick work, masonry, etc. any section, including taking out embedded portion and making good disturbed ground complete all as specified.

Dismantling fencing wire mesh, any type complete all as specified .

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

Excavation in post holes n. exc 0.50 cum, each getting out in soft/loose soil and removing surplus material n. exc 50 m and making good disturb surfaces complete all as specified and as directed.

M&L for PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in foundation of posts and struts, foundation, filling and mass concrete etc. complete all as specified.

S&F for Mild steel work of Fe-290 Gde E-165 as in angle iron fencing posts and struts & flat iron, drilled and countersunk for boulders running bars, including embedding in concrete and securing etc post and struts in fencing including cutting, tops to shape as directed, bent to shape, drilling holes, notching for wire etc. flat iron fillets (for securing wire mash etc.) including all necessary drilling, bolting or riveling etc. complete all as specified.

S&F for Mild steel Round bars conforming to Fe 290 (Gde-E-165) 10 mm dia and over as in horizontal vertical fillets in fencing including hooking complete all as specified.

S&F for Mild steel screw bolts (machine made) of 10 mm dia and 50 mm long with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut complete all as specified.

Supply only Chain link MS galvanised fencing, mesh size of 75 mm & nominal dia of mesh wire not less than 3 mm, complete all as specified.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc. including provission of binding wire complete all as specified.

M&L for Plain mild steel wire, galvanised class 3, in fencing including straining and fixing to wood, concrete or steel posts and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. complete all as specified.

S&F in repair for Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as complete all as specified. (each line wire to be measured).

M&L for preparation of new steel and iron surface of any description and applying 2 coats of syntheltic enamel paint over a coat of red oxide primer complete all as specified .

M&L for painting over surfaces of any description, n. exceeding 10 cm in width or girth when unconnected with other painting or when painted in a different tint complete all as specified.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n.exc 15 cm thickness (below or above GL) complete all as specified.

M&L for 100 mm thick Cement concrete type D-2, using 1 : 4 : 8 (40mm graded stone aggregate) as in sub floors/sub bases etc. complete all as specified.

M&L for 60 mm thick, machine pressed precast concrete interlocking paver block with grey cement and no pigment of any shape and size as approved by GE, confirming to IS 15658-2006, M-35 Grade, over and including 25mm thick sand cushions with filling in joints complete all as specified.

M&L for machine factory made PCC block (1:2:4) type B1 using 20 mm graded stone aggregate, as in kerb stone of size 300 x 300 x 150 mm set in cement mortar (1:4), complete all as specified.

Dismantling (corrugated or semi corrugated) sheets in roof coverings, any type & description, complete all as specified .

Dismantling timber scantlings 40 Sqcm and over in section from unframed work complete all as specified .

S&F rolled mild steel work as Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates. conforming to Fe-410W Gde E-250 quality 'A', complete all as specified.

M&L for mild steel work as in wind ties for roof covering including securing bolts etc. including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 290 Gde E-165 complete all as specified.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410W Gde E-250 quality 'A' complete all as specified.

Pre-painted galvalume alumimnium zinc coating GI based corrugated steel sheet 0.50 mm thick, sheeting of any colour having strength of 550 mpa as in roof covering etc, complete all as specified.

Pre-painted galvalume alumimnium zinc coating GI based plain steel sheet 0.50 mm thick sheeting of any colour having strength of 550 mpa as in roof covering etc, complete all as specified.

M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed & pointed in neat cement slurry in floors with grey cement & pigment over 15 mm thick screed in CM (1:6), complete all as specified.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc., complete all as specified .

M/s Ranaji Construction Co

abhinav and company

M/s Gupta Traders

VASUNDHARA AND COMPANY

M/S MAMTA CONSTRUCTIONS

Captainkomalchaharconstructions

PD GUPTA AND COMPANY

M/s K Prashad and Sons

krishna Associate

M/S CHAUDHARY CONSTRUCTION

ANANYA CONSTRUCTION CO.